Integrate linux-seco-imx/seco_lf-5.10.y-gm_c61_dev
Commit: edgehog/bsp/nxp/linux-seco-imx@81f402f2
[C61] add MAX98357A audio support
- audio over SAI3 interface
- sound works only at 48000Hz: this derives from SAI3 assigned clock rate.
- Test details: aplay --device sysdefault:CARD=max98457a /usr/share/sounds/alsa/Noise.wav
--
Commit: edgehog/bsp/nxp/linux-seco-imx@488d893f
[i.MX8] add SECO MAX98357A driver config
--
Commit: edgehog/bsp/nxp/linux-seco-imx@6ca4a8ae
[DRIVER] add MAX98357A codec support
Add support over I2S for i.MX8 SoCs. Also, make it possible to use GPIO from expanders to enable the codec.
--
Commit: edgehog/bsp/nxp/linux-seco-imx@3a9fda4d
[C61] add LVDS sn65dsi84 support
- enabled at u-boot: seco_config tool
--
Commit: edgehog/bsp/nxp/linux-seco-imx@8c0ed762
[C61] add eDP sn65dsi86 support
- enabled at u-boot: seco_config tool
--
Commit: edgehog/bsp/nxp/linux-seco-imx@997a9a22
[C61] add GSM modem support
- enabled at u-boot: seco_config tool
--
Commit: edgehog/bsp/nxp/linux-seco-imx@20233d15
[i.MX8] add SECO GSM power manager driver config
--
Commit: edgehog/bsp/nxp/linux-seco-imx@fae4edfb
[DRIVER] add SECO GSM power manager driver
--
Commit: edgehog/bsp/nxp/linux-seco-imx@99d821a9
[C61] add ov5640 csi support
- enabled at u-boot: seco_config tool
--
Commit: edgehog/bsp/nxp/linux-seco-imx@b09b416c
[C61] add port1, port2 can + port2 rtc support
- enabled at u-boot: seco_config tool
--
Commit: edgehog/bsp/nxp/linux-seco-imx@33015f4d
[C61] add port1, port2 rs485 support
- enabled at u-boot: seco_config tool
--
Commit: edgehog/bsp/nxp/linux-seco-imx@56176144
[C61] add port1, port2 rs232 support
- enabled at u-boot: seco_config tool
--
Commit: edgehog/bsp/nxp/linux-seco-imx@0abd86a0
[C61] add port1, port2 gpio support
- enabled at u-boot: seco_config tool
--
Commit: edgehog/bsp/nxp/linux-seco-imx@9afe7e8d
[C61] add ecspi support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@a595ebd7
[C61] add eeprom support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@c2ae9179
[C61] add uart1, uart3, uart4 support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@cb4a195f
[C61] add ethernet support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@3c4b8a81
[C61] add seco,apx-wdog support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@69874217
[C61] add PWM buzzer support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@84d6e679
[C61] add lightsensor, accelerometer, gyro support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@4980ec5c
[C61] add flexspi support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@f874b237
[C61] add PWM support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@75f74b75
[C61] add usb support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@19c118a7
[C61] add pcie support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@4e646583
[C61] add gpio expander PCA6416 support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@fea3f727
[C61] add usdhc1 Murata 1MW support
Murata Type 1MW is based on Infineon CYW43455 chipset and utilizes Broadcom FullMAC WLAN driver.
--
Commit: edgehog/bsp/nxp/linux-seco-imx@03c1a3d2
[C61] add usdhc2 SD support
--
Commit: edgehog/bsp/nxp/linux-seco-imx@978c6088
[C61] enable early debug uart
--
Commit: edgehog/bsp/nxp/linux-seco-imx@75a05325
[C61] add pinctrl groups
--
Commit: edgehog/bsp/nxp/linux-seco-imx@1ed4cd9c
[C61] add PMIC
--
Commit: edgehog/bsp/nxp/linux-seco-imx@e6516aae
[C61][DTSI] set MMC enumeration
- internal eMMC --> device 0
- external SD --> device 1
--
Commit: edgehog/bsp/nxp/linux-seco-imx@aed1f620
[C61] clear dts from reference board peripherals
--
Commit: edgehog/bsp/nxp/linux-seco-imx@c1536ca7
[i.MX8MM][C61] init porting derived from nxp imx8mm-evk
--
Commit: edgehog/bsp/nxp/linux-seco-imx@1c560ecf
[DRIVER] update DSI-to-LVDS SN65DSI84 bridge
- revert to previous bridge registration management: currently, on SoCs MX8M{M,N,P} the DSI host and bridge drivers go into deadlock, both waiting for the other to complete its registration.
- refactor code: clean up, align to DSI-to-eDP SN65DSI86 driver structure