--

Commit: seco-ne/kernel/linux-imx-kuk@9f808f72

dts:trizeps8plus: Disable VPU

The VPU is currently not working, disable it to enable SW decoding by default.

BCS 746-001087

--

Commit: seco-ne/kernel/linux-imx-kuk@5f217ff8

files: Fixed access permissions of driver files


(cherry picked from commit 3b5b35030b19b27ed4ebcc36eb78c0ed863a528b)

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a5e27f6e

FTP upload: Add flag to hide FTP upload stage

This is a workaround to prevent customer releases being uploaded to our
public FTP area. It should be removed as soon as we support uploading to
different FTP target folders.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@543a2170

manifest_package: add release suffix

Customer specific manifest projects can now set the RELEASE_SUFFIX
variable, which then gets appended to the deployment folder names.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c763c43f

alphaplan_fwr: change variable "release_name_local" to "release_name"

Otherwise it can be assumed that it might be correlated with
outputdir_local, which is not the case.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@2d8d26a5

package_release: more refactoring

- Make output-dir an argument that can be passed multiple times instead
  of hard-coding two dirs with certain meanings.
- Remove LOCALDIR variable from package.env, because it is not used
  anywhere (only occurence was job class ".uploadsdkftp" which wasn't
  used anywhere either).

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@dc3698c8

package_release: refactoring

Improve readability of package_release.py and its submodule
generate_release_metadata.py.

- Add describing comments throughout the file.
- Remove duplicate code from functions. Simplify them, so that they do
  what their names say (and nothing more).
- Rename variables and function arguments to make their purpose clearer.
- Harmonize variable names with their corresponding command line arguments.
- Add pydoc for functions.
- Add type declarations to function arguments.
- Generate MD5 and metadata files in the source directories so that they
  can be copied along with the rest of the files.

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@1330fad5

MC3: Fix missing LPDDR4 RAM setting

During integration of MC3 LPDDR4 RAM settings with 3733 MTS Trizeps RAM
settings for some reason one line of the MC3 RAM settings got lost,
resulting in training for 400 MTS to fail on MC3.

This patch re-insert the missing line. Now MC3 400 MTS training is
working again.

--

Commit: seco-ne/kernel/linux-imx-kuk@c8d34053

dts:mc3: Added status and panic LEDs


(cherry picked from commit 6463eac2dbf78bf830c9da28e1fccb9bc2d09626)

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@36e07a27

trizeps8plus/mc3: Add fuse decoding for RAM size

The code to readout the fuses that define the installed RAM size have
not been implemented for trizeps8plus. Merged the related code from
trizeps8mini into the trizeps8plus board file and adapted the defines
to use 1GB Ram without fuses, used for MC3.

The PHYS_RAM_SIZE define is now set to 3GB as this is also used to
define the RAM mapping, where 3GB is addressable.

BCS 746-001065

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c831d1da

get_integration_sources: check if CI is enabled

Trying to query CI variables on a project which does not have the CI
feature enabled leads to an HTTP 403 (forbidden) error.
Check whether CI is enabled using the "jobs_enabled" flag.

--

Commit: seco-ne/kernel/linux-imx-kuk@e23fb18b

dts:mc3: Enabled GPUs and VPUs

Enabled the 2D/3D GPUs and the various VPUs on the i.MX8MP.

BCS 746-001060

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@e5db3c18

cmd:guf: Disabled debug output

The linux-guf package has been renamed to linux-seconorth. Added
linux-seconorth to the SRCREV.conf file.

Change-Id: Id354a4411146e770e21275b9eb603c81d8acf8e9

--

Commit: seco-ne/kernel/linux-imx-kuk@f2d5cd89

mc3:dts: Enable ECSPI1

BCS 746-000942

--

Commit: seco-ne/kernel/linux-imx-kuk@6e662a08

dts:mc3: Set correct backlight PWM period for lq057q3dc12

The backlight PWM period was wrong which prevented the display from
dimming correctly.

--

Commit: seco-ne/kernel/linux-imx-kuk@f1f62734

dts:mc3: Add gpio-reset for usb type c high-speed switch

BCS 746-000948

--

Commit: seco-ne/kernel/linux-imx-kuk@375358ce

dts:mc3: Set usb mode of ptn5150 to DRP

Set Rp to 330uA to advertise 3A at 5V in host mode.

BCS 746-000948

--

Commit: seco-ne/kernel/linux-imx-kuk@a9a63d19

drivers:extcon:ptn5051: Add devicetree properties for usb mode and Rp

The properties can be set optionally in the devicetree. If one is set,
the control reg of the ptn 5051 is adjusted accordingly via i2c at the end
of the probing routine. This allows to override the initial configuration
which is applied during power up.

Rp: Advertises the allowed current in host mode
mode: UFP, DFP or DRP

BCS 746-000948

--

Commit: seco-ne/kernel/linux-imx-kuk@80b24df8

dts:mc3: Enable otg mode on usb-c port

After driver customizations we can use the usb-role class scheme to
enable the otg mode.

BCS 746-000948

--

Commit: seco-ne/kernel/linux-imx-kuk@0de731c9

drivers:extcon:ptn5051: Change probing order

The previous probing order let to an irq: type mismatch error when
deferred probing is required. This is due to the fact that some
interrupt assignments already take place before probing is cancelled.
Now the usb_role_switch_get function is moved before the interrupt
assignments to cancel if the usb driver is not ready yet.

BCS 746-000948

--

Commit: seco-ne/kernel/linux-imx-kuk@70afadb7



extcon: ptn5150: Add usb role class support

Some usb controller drivers may not support extcon but use
usb role class as it's the preferred approach, so to support
usb dual role switch with usb role class, add usb role class
consumer support.

Signed-off-by: Li Jun <jun.li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

--

Commit: seco-ne/kernel/linux-imx-kuk@00534267



extcon: ptn5150: Add queue work sync before driver release

Add device managed action to sync pending queue work, otherwise
the queued work may run after the work is destroyed.

Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@5e3dfaea

CI:deploy: fix fngsystem deployment path

The match to detect fngsystem still contained 'guf'. Changed to 'seco'.

BCS 746-001043

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@c432389c

Removed rearrangement of the USDHC busses

The USDHC busses had been rearranged, because we have a different pin mapping
on the MC3 (as compared to the Trizeps modules and the DE).
We now have a boot bus detection, which sets the correct bus for the boot
scripts. This makes the rearrangement obsolete.
Removing the rearrangement also fixes an error in the save function for the
environment, which mixes the boot bus with the device tree definitions.

BCS 746-000814

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@fb5fcbc7

cmd:guf: Added boot bus detection to guf sub-system

The boot bus detection sets an environment variable that contains the USDHC
bus, from which U-Boot was started. The variable is used in the search for the
boot scripts and prevents U-Boot from mixing up the eMMC and SD-Card.

BCS 746-000814

--

Commit: seco-ne/kernel/linux-imx-kuk@2f764520

dts:panel: Fixed data mapping for lq057q3dc12

The lq057q3dc12 runs with a jeida-24 data mapping.

BCS 746-000951

--

Commit: seco-ne/kernel/linux-imx-kuk@a3af12be

dts:panel: Added optional panel-dt node for lq057q3dc12

Added an optional node with panel-dt settings for the
lq057q3dc12.

BCS 746-000951

--

Commit: seco-ne/kernel/linux-imx-kuk@865f6727

drm:panel: Ported panel-dt driver from i.MX6 kernel

We use a custom Simple Panel driver that allows a more detailed description of
panels in the device tree. This is discouraged by the mainline kernel but has
shown useful for our specific applications.

For a more detailed explanation see the discussion https://patchwork.kernel.org/
project/dri-devel/patch/20190307101030.3822-1-maxime.ripard@bootlin.com/ on
the DRI mailing list and the original commit https://git.seco.com/seco-ne/
kernel/linux-guf/-/commit/bc113aef63149d38a61f618b40f91e22d53fe5cd on the i.MX6
kernel.

Note: Replaced all occurences of the old G&F name to SECO and also fixed
some smaller typos.

BCS 746-000951

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f8d6de86

Make check error message more verbose

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@21e7edeb

Improve ci-test build

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@76bd81d8

Fix check job rules

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a6721243

Move check job to parent pipeline

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@593784e1

Refactor check_if_integration_branch_is_up_to_date

- Use "source" and "target" terminology in the script, just like in the
  GitLab CI variables.
- Spefify data types for function arguments.
- Rename function arguments to better reflect their data types.
- Move determination of integration branch into main function, so that
  the successfull status message can be more verbose.
- Remove parent_merge_request feature and checking for gitlab-ci
  integrations, because the check job does not run on gitlab-ci
  integration branches at all.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@45b49ee3

Remove build stage on master

We don't need to explicitly trigger a build after merging changes in
gitlab-ci. A master pipeline on the target projects runs automatically.

--

Commit: seco-ne/kernel/linux-imx-kuk@14ab9f8a

dts:mc3: Enable device mode on usb-c port

Set the usb-c port to device mode as it should be used as peripheral
at first. Added an entry for ptn5150 cc logic IC and put it in UFP
mode.

BCS 746-000948

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@50a24cfe

spl: Print selected config ( devicetree name) during startup

--

Commit: seco-ne/kernel/linux-imx-kuk@5d30a834

dts:mx8mp: Added HDMI devicetree include for i.MX8MP

The include file enables the various HDMI related nodes of the
i.MX8MP.


(cherry picked from commit 4327469619656276221c6b48013e67aec55c493e)

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@72b70c39

mc3: distinct between mc3 and trizeps8plus during spl boot

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@1b5b617d

add basic MC3 support

This patch adds basic MC3 support to U-Boot.
Note: This currently only partially integrates with
Trizeps VIII Plus support and in several places still breaks
the Trizeps support.

This still needs quite a bit of clean-up, esp. regarding:
 * eMMC configuration
 * pun-muxing
 * separate DTs

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@af12e8a8

bootselect: Add rtc and gpio for mc3, fixed 'high active' mode for bootmode gpio

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@49be8343

dts:mx8mp: Change order of mmc

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@a1eebf1c

dts:mx8mp: Fixed error on eMMC due to missing pull-up

The pull-up of the CMD line of the eMMC isn't placed on the hardware.
Therefore, the internal pull-up of the pad is required, for the CMD line
to function properly.
Also increased the clock rate to 400 MHz (see NXP EVK) and assigned the
correct regulators (the eMMC uses fixed power rails for 1.8 V and 3.3 V).

Cherry-pick from linux-imx-kuk c8c74463 and 482dc0dc

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@ba5e2bf8

config:dts:mc3: Added separate devicetree for MC3

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@11b4ff7d

maincontroller3: Initial modifications to boot mc3

Boots fngsystem (kernel 5.15) via uuu

The modifications are taken from Marcs diff (US 746-000812). I just had
to reenable the FASTBOOT functionalities in
configs/trizeps8plus_defconfig. Keep in mind that the correct bl31
binary is required.

--

Commit: seco-ne/kernel/linux-imx-kuk@01e4dc24

dts:mc3: Added current state of the AC97 development

The AC97 part of the MC3 DTs is the current state of the
development/testing.

BCS 746-000955

--

Commit: seco-ne/kernel/linux-imx-kuk@89ae9452

arm64:dts: Spun out the lq057q3dc12 from the MC3 DT

Moved the lq057q3dc12 to a separate devicetree include and
added a new devicetree for the MC3 with lq057q3dc12.

BCS 746-000951

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a0f7e84f

Rename pipeline stages to reflect YAML filenames

--

Commit: seco-ne/kernel/linux-imx-kuk@a5d2b9ff

dts:mc3: Corrected value for VIN regulator voltage

--

Commit: seco-ne/kernel/linux-imx-kuk@b3ae7456

dts:mc3: Add support for USB type A

Activate the USB nodes and regulators for the VBUS voltages.The OC
detection function is not yet enabled. The USB hub is now enabled
by default. At the moment the connector of the backplane is untested.

BCS 746-000947

--

Commit: seco-ne/kernel/linux-imx-kuk@d458a684

arm64: dts: tanaro: Reduce pixelcklock frequency for  scx1001255ggu06

Due to an unknown graphics pipeline issue we cannot use the correct
display settings for the SCX1001255GGU06 display. It seems that the
clocking and synchronization of the whole graphics pipeline consisting
of the LCDIF, the MIPI DSI, the MIPI PHY and the MIPI to LVDS
transceiver cannot be applied by simply changing the clock-frequency of
the attached panel.

Though trail and error we were not able to modify the pipeline clocking
in such a way that it works with the correct frequency.

Thus use the frequency from the fg0700w0dsswagl1 instead.

The display has a reduced frame rate, but otherwise works as expected.

--

Commit: seco-ne/kernel/linux-imx-kuk@c6bcfd0e

dts:mc3: Configure WDOG_B reset pin

--

Commit: seco-ne/kernel/linux-imx-kuk@a7ce4e8a

dts:mc3: Add pmic interupt pin

--

Commit: seco-ne/kernel/linux-imx-kuk@4e203aeb

dts:mc3: Added AC97 GPIO names and disabled SAI

Temporarily disabled the SAI/AC97 to test the GPIO order.

BCS 746-000955

--

Commit: seco-ne/kernel/linux-imx-kuk@9c7ec5e0

dts:mc3: Fixed the clock of the LVDS panel

The LVDS receiver requires an input clock of at least 20 MHz.
Since the display supports VGA and QVGA, the higher clock (for VGA)
is used for now.

Note: Further work on the display timings is required.

BCS 746-000951
BCS 746-000944

--

Commit: seco-ne/kernel/linux-imx-kuk@493487c9

dts:mc3: Fixed the lcdif node and the backlight

Configured the panel to the correct display settings.
The lvds interface is internally connected to lcdif2.
The GPIO for the backlight enable was wrong.

BCS 746-000951

--

Commit: seco-ne/kernel/linux-imx-kuk@00334867

dts:mc3: Enable CAN2

Also use the GPIO_PAD macros to cleanup the devicetree for can related
gpios.

--

Commit: seco-ne/kernel/linux-imx-kuk@944f9fe0

dts:seconorth: Move GPIO_PAD defines to imx8m[mp]-pinfunc

The GPIO_PAD macros make the source code more readible but
have been available for trizeps8 boards only.
Moving the macros one step up, make them available for the other
boards too.

--

Commit: seco-ne/kernel/linux-imx-kuk@7c86977f

dts:mc3: Enable CAN 1

BCS 746-000945

--

Commit: seco-ne/kernel/linux-imx-kuk@50d3074a

dts:mc3: Set RTC interrupt pin

BCS 746-000943

--

Commit: seco-ne/kernel/linux-imx-kuk@83b540ae

dts:mc3: Improve ethernet configuration

Now the correct phy reg is set explicitly. Use the driver specific bindings
for the phy reset and set the correct reset timings.

BCS 746-000932

--

Commit: seco-ne/kernel/linux-imx-kuk@aeb17f0c

dts:mc3: Add buzzer

BCS 746-000936

--

Commit: seco-ne/kernel/linux-imx-kuk@b45401cc

dts:mc3: Added first draft for LCDIF and backlight

First draft of the integration of the LCDIF and the PWM backlight.
The changes haven't been tested yet.

BCS 746-000944
BCS 746-000951

--

Commit: seco-ne/kernel/linux-imx-kuk@c805f2da

dts:mc3: Added TTL GPIOs

BCS 746-000953

--

Commit: seco-ne/kernel/linux-imx-kuk@4f0eaf5a

dts:mc3: Added SENSE GPIOs to the devicetree

BCS 746-000952

--

Commit: seco-ne/kernel/linux-imx-kuk@9082da17

dts:mc3: Added first draft of AC97 codec

The MC3 uses an AC97 codec for audio/touch input.
Added a first version of the AC97 codec to the devicetree.

Note: The communication couldn't be tested yet and might not work.

--

Commit: seco-ne/kernel/linux-imx-kuk@e3eac34d

dts:mc3: Change order of mmc

The eMMC is connected to usdhc3, but we need it on mmc0.
Re-ordered the mmcs to reflect this change.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@d25cdebf

Really fix potential error message in retrigger job

TypeError: 'NoneType' object is not subscriptable

Example:
https://git.seco.com/seco-ne/yocto/manifest/-/jobs/129201

--

Commit: seco-ne/kernel/linux-imx-kuk@f8168d68

arm64: dts: tanaro: Add device tree for scx1001255ggu06

Add the device tree for the touch display set SCX1001255GGU06 including
the LCD panel FG1001L0DSSWMG01 and an SIS touch.
The panel is connected via LVDS.

The current state does not work as expected. It seems the MIPI signals
are not clocked out correctly.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@3eef782e

deploy_gitlab_ci: integrate only correct projects into the manifest

Previously we integrated all projects into the manifest, even those that
belonged to a different manifest branch. That led to all manifests
having the same project revisions, even if they should be different due
to different intgrated project branches.

Save a list of integration sources for each manifest branch separately
now, so that we can check which project belongs to which manifest branch
later.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@2b851ac6

Fix potential error message in retrigger job

TypeError: 'NoneType' object is not subscriptable
Example:
https://git.seco.com/seco-ne/yocto/infrastructure/ci-test/minimal-manifest/-/jobs/127610

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c3fd0ecc

Check if variable is defined before checking it value

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c1be0f4b

Fix jinja2 "or" operator

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8da534ec

Run integration pipeline for target branch only

When we're integrating a single branch into a single manifest branch,
there is no need to run the intgeration pipeline for all configured
integrations, but only for those that match the target branch of the
current merge request.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8c94b725

ci-test: add job to check for correct foo branch

This should catch an error where during a gitlab-ci merge process the
wrong foo branch is integrated into the manifest, which happened in
Yocto.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@163c7e1e

Add yml extension to jinja2 templates

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@59523aa0

check job: disable verbose output

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@28bf0065

retrigger: add job states to log message

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@fd742017

deploy_gitlab_ci: fix target branch in integration merge request

We need to pass the correct target branch to the merge request creation
instead of using the project's default branch.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@38379173

Run yamllint job on gitlab-ci integrations

Otherwise no pipeline is created at all in these merge requests, which
prevents the MR from being merged.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@dce4f8a3

changelog_generator: Fix machine project ID

We have deleted the original project due to git corruption. Replace with
the new project's ID.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a7aa7c26

deploy_gitlab_ci: fix project argument passing

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8a38f194

Put all manifest intgeration jobs into a single stage

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a09564c1

deploy_gitlab_ci: explicitly pass gitlab-ci project and branch

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@172e7625

Improve error messages

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f0f5a370

Improve naming of functions and variables

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c8b484ca

Retrigger MRs from all integrating projects

Instead of getting the projects from the manifest file, search them via
their INTEGRATION variable.

Improve log messages on this occasion: print URL instead of just IDs.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@5e75bfc1

Deploy gitlab-ci to multiple branches

Add different integration jobs for different manifest branches. The
merge stage only has one job for each manifest, though, because
otherwise we cannot guarantee a consistent state for all branches.

Extend the deploy script for this purpose, so that it can deploy to
multiple manifest branches at once.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@771dcff1

Fix temporary dir path

We were passing the complete TemporaryDirectory object to the repo clone
function instead of just the path string, resulting in the repo being
cloned into a local dir "<TemporaryDirectory '/tmp/tmphwakypf8'>".

Fix this to actually use the generated temp dir.

This change makes it necessary to keep the TemporaryDirectory object
reference until we don't need the directory anymore, otherwise it will
be removed immediately.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@dce219c8

Print less important output in grey color

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@5e36261d

deploy_gitlab_ci: remove hard-coded integration targets

Get targets dynamically using the INTEGRATION variable instead.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@94cd6781

Recurse to child pipelines on retrigger

This makes it possible to retrigger jobs that are not part of the
given pipeline but in any nested child pipeline of it.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@fb1219a7

Ignore __pycache__ in scripts directory

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@0c29c995

Refactoring: rename arguments for consistency

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@d461090b

Remove hard coded project and branch variables

MANIFEST_PROJECT, MASTER_BRANCH_MANIFEST, MASTER_BRANCH_PROJECT

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a4aae414

Add rules for integration pipeline

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@bfa38b24

Improve log messages

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@1c9670d9

commit_and_push: do not pass branch

Branch can be implicitly determined via the repo.

--

Commit: seco-ne/kernel/linux-imx-kuk@482dc0dc

dts:mc3: Removed unused regulator for usdhc3

BCS 746-000931

--

Commit: seco-ne/kernel/linux-imx-kuk@c8c74463

dts:mc3: Fixed error on eMMC due to missing pull-up

The pull-up of the CMD line of the eMMC isn't placed on the hardware.
Therefore, the internal pull-up of the pad is required, for the CMD line
to function properly.
Also increased the clock rate to 400 MHz (see NXP EVK) and assigned the
correct regulators (the eMMC uses fixed power rails for 1.8 V and 3.3 V).

--

Commit: seco-ne/kernel/linux-imx-kuk@57cb5691

dts:mc3: Added eMMC and SD-Card pinctrl groups and nodes

Note: The eMMC isn't working yet.

--

Commit: seco-ne/kernel/linux-imx-kuk@1acab19a

dts:mc3: Reformat of the pmic node and eqos pinctrl group

--

Commit: seco-ne/kernel/linux-imx-kuk@f9d60e47

dts:mc3: Added voltage regulator nodes

Added nodes for the generic voltages and three nodes for the eMMC and
SD-Card (the SD-Card requires a 1V8 and 3V3 rail for the high-speed mode).

--

Commit: seco-ne/kernel/linux-imx-kuk@460238cb

dts:mc3: Added MC3 devicetree to Makefile

--

Commit: seco-ne/kernel/linux-imx-kuk@ea28f790

mc3:dts: Initial commit for mc3 devicetree

What works:
* fngsystem (kirkstone) ramfs boot via uuu
* for UART2 an alias to serial0 is set
* ethernet, at the moment no phy-reg is set explictily
* RTC, we need to check if specific backup source settings are required:
root@FLASH-N-GO:~# dmesg | grep rtc
[    1.519835] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc1
[    1.960681] rtc-rv8803 0-0032: Voltage low, temperature compensation stopped.
[    1.967833] rtc-rv8803 0-0032: Voltage low, data loss detected.
[    1.977571] rtc-rv8803 0-0032: Voltage low, data is invalid.

BCS 746-000818

--

Commit: seco-ne/tools/guf-show-demo@e6c40f81

Rename branch to kirkstone

Adapt recipe name for integration accordingly.

Remove guf-show-demo revision because it is not used anymore in
kirkstone.

--

Commit: seco-ne/kernel/linux-imx-kuk@f8a21b5b

gitlab-ci: Update master branch to 5.15.32

--

Commit: seco-ne/tools/gf-emc-test-suite@165940b8

Update branch and recipe name for kirkstone integration

--

Commit: seco-ne/kernel/linux-imx-kuk@16633747

logo: Removed duplicate of seco boot logo

A duplicate of the seco logo was present in the logos dir.

--

Commit: seco-ne/kernel/linux-imx-kuk@be1249c0

fngsystem: Added image file for fngsystem

The image file for the fngsystem boot logo was missing.
Re-added the file to fix the kernel build.

--

Commit: seco-ne/kernel/linux-imx-kuk@73188255

logo: Enable SECO and FnG logo by default

Both logos need to be enabled by default. The logo that is added to the
kernel is picked through the defconfig and the override in the kernel
include file.

--

Commit: seco-ne/kernel/linux-imx-kuk@371eefb2

logo: Added fngsystem boot logo

Cherry-pick from af765e15