--

Commit: seco-ne/kernel/linux-imx-kuk@482dc0dc

dts:mc3: Removed unused regulator for usdhc3

BCS 746-000931

--

Commit: seco-ne/kernel/linux-imx-kuk@c8c74463

dts:mc3: Fixed error on eMMC due to missing pull-up

The pull-up of the CMD line of the eMMC isn't placed on the hardware.
Therefore, the internal pull-up of the pad is required, for the CMD line
to function properly.
Also increased the clock rate to 400 MHz (see NXP EVK) and assigned the
correct regulators (the eMMC uses fixed power rails for 1.8 V and 3.3 V).

--

Commit: seco-ne/kernel/linux-imx-kuk@57cb5691

dts:mc3: Added eMMC and SD-Card pinctrl groups and nodes

Note: The eMMC isn't working yet.

--

Commit: seco-ne/kernel/linux-imx-kuk@1acab19a

dts:mc3: Reformat of the pmic node and eqos pinctrl group

--

Commit: seco-ne/kernel/linux-imx-kuk@f9d60e47

dts:mc3: Added voltage regulator nodes

Added nodes for the generic voltages and three nodes for the eMMC and
SD-Card (the SD-Card requires a 1V8 and 3V3 rail for the high-speed mode).

--

Commit: seco-ne/kernel/linux-imx-kuk@460238cb

dts:mc3: Added MC3 devicetree to Makefile