Rename the B79 include file and also add the file -b79 file extension to
the base devicetrees.

Remove reference to qcs6490 as E81 has both qcs6490 and qcs5430

Dietmar Muscholik authored 2 months ago and Oleksii Kutuzov committed 2 months ago

usb_1 is a little bit weird, copied from qcom-device-trees

For three options:
- QCS6490
- QCS5430 FP1
- QCS5430 FP2

This reverts commit 8eb2a6b0.
This reverts commit 665c84d5f7738cf0f700e8447153942dfcae644a.
This reverts commit 6a73cc68.

Change-Id: Iab6f2de32ac227aae6bbc93ac71affce01782f79
Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>

The "capacity-dmips-mhz" and "dynamic-power-coefficient" are
used to build Energy Model which in turn is used by EAS to take
placement decisions.

Change-Id: Ic95b0766b1e14485de09dc6362de24ed4072de30
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>

This change enables camera sensor for rb3gen2 addon kits.

Change-Id: I4402562f46ae4ef81f418d5c4a26df731da1d29a
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>

As per the thermal framework, the name of a thermal
zone should be under 20 characters. Shorten the name of
the thermal zones accordingly.

Change-Id: I55208f52f84cf458e4bd39913c2495a7d6cf5be0
Signed-off-by: Rakesh Kota <quic_kotarake@quicinc.com>

BACKPORT: FROMLIST: arm64: dts: qcom: qcs9100: Update memory map  for QCS9100 Ride and QCS9100 Ride Rev3

This patch series is based on Tengfei Fan's patches [1] which adds support
for QCS9100 Ride and QCS9100 Ride Rev3 boards.

Some new carveouts (viz. gunyah_md and a few pil carveouts) have been
introduced and the size and base addresses have been updated for
a few of existing carveouts compared to SA8775P. Also, tz_ffi_mem carveout
and its corresponding scm reference has been removed as it is not required
for these boards. Incorporate these changes in the updated memory map
boards.

[1] https://lore.kernel.org/all/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com/.

Change-Id: I6ff50376710bb906e8a58940a10f6ef29274852d
Link: https://lore.kernel.org/all/20241119092501.31111-1-quic_pbrahma@quicinc.com/


Patch-mainline: linux-arm-msm @ 19/11/2024, 14:55
[ quic_pbrahma@quicinc.com: Removed tz_ffi_mem reference. ]
Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com>

This change updates power-domain for display controller for qcs8300
and sa775p target.

Change-Id: I1c5dac0a2be60919231a02f9588af9c37fd5d10d
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>

Add audio changes to adapt for qcs9075 RB8 board.

Change-Id: I01d64178b559f8dcdfef155be71a97e58ad0db17
Signed-off-by: Saurav Kumar <quic_sauravk@quicinc.com>
Signed-off-by: Sairamreddy Bojja <quic_sbojja@quicinc.com>

Declare the displayport controller present on the Qualcomm QCS9075 RB8
SoC and connect to edp PHY.

Change-Id: I96bce22b03eac5d198a18c1d0ccc9875c142e58f
Signed-off-by: Sai Srujana Oruganti <quic_osaisruj@quicinc.com>

Add UFS support for qcs9075 rb8 board.

Change-Id: I1545082ef73a83d321cf4a669697dcf080000d03
Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>

Enable primary controller usb0 in drd mode, usb1 and micro usb2 in
host mode.

Change-Id: Ic298074c8cc14a5b5fdad2283ff6e0cb19d8ba00
Signed-off-by: Akash Kumar <quic_akakum@quicinc.com>

Add a property to SE node that indicates whether
the firmware should be loaded from Linux, along with the
transfer mode details.

Change-Id: I8e5332b7c31f4ab82ef3f044fd283ad4ddda52e6
Signed-off-by: Mehul Raninga <quic_mraninga@quicinc.com>

This reverts commit 2fe8ecbe.

Signed-off-by: Linux Build Service Account <lnxbuild@localhost>
Change-Id: I2834cb4aac3b3f4abbaecbc4c817f76da12d4617

Add ICE node in eMMC device tree node to enable inline
encryption support.

Change-Id: Ie0e4c59d6fa6e4a90fca0d57dd6f8e7614692736
Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>

This reverts commit e1277958.

Reason for revert: Camera broke on tip.

Change-Id: I1e9eb500403b183a6dd5a256289e4e16e1167a47
Signed-off-by: Salendarsingh Gaud <quic_sgaud@quicinc.com>

This reverts commit 3748c354.

Reason for revert: Camera functionality is broken on QCLINUX.

Change-Id: I7120c3032f5e6d8d759b9912b872b1eb2cfc90f7
Signed-off-by: Salendarsingh Gaud <quic_sgaud@quicinc.com>

Certain commits previously changed the dr_mode from host to
"otg" as a mistake during backporting and trying to enable
EUD. Fix them up and mark all non-primary ports as host only
supported.

Fixes: 17bccce5 ("PENDING: arm64: dts: qcom: sa8775p: Add EUD dt node")
Change-Id: I16b93225ff1f277003f38d2eaa349d64e227e7bb
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>

Enable cpu idle injection cooling maps for all cpu tsens for
qcs9075 platforms.

Change-Id: Ib81126664951a2b3030e297fbd0ec188d7c5c8af
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>

GPIO147 of qcs9075 services as BT_I2S_0_SDO and bootstrap
pin EDL_MODE for WCN6855, need to set this pin as logic
high when enable Bluetooth.

Change-Id: If677a53db74b9ea9608b2818f5964421a09c11c8
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>

Add wlan support for qcs9075-rb8 board.

Change-Id: Ib3431329d68128d4a4e21018c4439ead61bffb9c
Signed-off-by: Zhi Chen <quic_zhichen@quicinc.com>

Add device tree support for the QCS9075 Ride & Ride-Rev3 addons.

Change-Id: I173ddb866428be16eaf6c9b5a1a7a10d44aee158
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>

Add device tree support for the QCS9075 RB8 addons.

Change-Id: I29afe3e03bea10edf6494565191f8358db201aa9
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>

New memory map for qcs8300 as per version v1 adds several new carveouts 
related to firmware. Update the new memory map in dtsi for QCS8300.

Change-Id: Ic49eb5727a9562288528d1292a770579a1de89e8
Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com>

Enable cpu idle injection cooling maps for all cpu tsens
for qcs9100 platforms.

Change-Id: I59d977e7000993ac35b1958d82ccc2526520b827
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>

This update lets the crypto driver get the bandwidth value from the
dtsi file to set the interconnect, if the entry is not present then
the default value will be used.

Test: crypto usecases.
Change-Id: If1a808c08c9eb2c03dbbd0610a0dc75a5300d9d4
Signed-off-by: Udit Tiwari <quic_utiwari@quicinc.com>

There are some items come out to be same value if we do SID & ~MASK.
Remove duplicate cdsp compute-cb nodes for qcs8300 to simplify.

Change-Id: I491b9211e10ea56ab2273bb54d6be6a4617968c1
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>

Enable PCIe controller and phy nodes. And also add gpio related
configurations PCIe side-band signals.

Change-Id: Ia266b1a65f9a4627127024c01a409d66e08bf0f3
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>