Rename the B79 include file and also add the file -b79 file extension to
the base devicetrees.

Remove reference to qcs6490 as E81 has both qcs6490 and qcs5430

Dietmar Muscholik authored 2 months ago and Oleksii Kutuzov committed 2 months ago

usb_1 is a little bit weird, copied from qcom-device-trees

For three options:
- QCS6490
- QCS5430 FP1
- QCS5430 FP2

An exact copy of the qcom_defconfig

Add support to enable the GPUCC SA8775P driver as static module.

Change-Id: Id7237a7f1f6769db821ddb59f08d96fad754d579
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>

This reverts commit 8eb2a6b0.
This reverts commit 665c84d5f7738cf0f700e8447153942dfcae644a.
This reverts commit 6a73cc68.

Change-Id: Iab6f2de32ac227aae6bbc93ac71affce01782f79
Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>

The "capacity-dmips-mhz" and "dynamic-power-coefficient" are
used to build Energy Model which in turn is used by EAS to take
placement decisions.

Change-Id: Ic95b0766b1e14485de09dc6362de24ed4072de30
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>

This change enables camera sensor for rb3gen2 addon kits.

Change-Id: I4402562f46ae4ef81f418d5c4a26df731da1d29a
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>

As per the thermal framework, the name of a thermal
zone should be under 20 characters. Shorten the name of
the thermal zones accordingly.

Change-Id: I55208f52f84cf458e4bd39913c2495a7d6cf5be0
Signed-off-by: Rakesh Kota <quic_kotarake@quicinc.com>

BACKPORT: FROMLIST: arm64: dts: qcom: qcs9100: Update memory map  for QCS9100 Ride and QCS9100 Ride Rev3

This patch series is based on Tengfei Fan's patches [1] which adds support
for QCS9100 Ride and QCS9100 Ride Rev3 boards.

Some new carveouts (viz. gunyah_md and a few pil carveouts) have been
introduced and the size and base addresses have been updated for
a few of existing carveouts compared to SA8775P. Also, tz_ffi_mem carveout
and its corresponding scm reference has been removed as it is not required
for these boards. Incorporate these changes in the updated memory map
boards.

[1] https://lore.kernel.org/all/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com/.

Change-Id: I6ff50376710bb906e8a58940a10f6ef29274852d
Link: https://lore.kernel.org/all/20241119092501.31111-1-quic_pbrahma@quicinc.com/


Patch-mainline: linux-arm-msm @ 19/11/2024, 14:55
[ quic_pbrahma@quicinc.com: Removed tz_ffi_mem reference. ]
Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com>

This change updates power-domain for display controller for qcs8300
and sa775p target.

Change-Id: I1c5dac0a2be60919231a02f9588af9c37fd5d10d
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>

Add audio changes to adapt for qcs9075 RB8 board.

Change-Id: I01d64178b559f8dcdfef155be71a97e58ad0db17
Signed-off-by: Saurav Kumar <quic_sauravk@quicinc.com>
Signed-off-by: Sairamreddy Bojja <quic_sbojja@quicinc.com>

Declare the displayport controller present on the Qualcomm QCS9075 RB8
SoC and connect to edp PHY.

Change-Id: I96bce22b03eac5d198a18c1d0ccc9875c142e58f
Signed-off-by: Sai Srujana Oruganti <quic_osaisruj@quicinc.com>

Add UFS support for qcs9075 rb8 board.

Change-Id: I1545082ef73a83d321cf4a669697dcf080000d03
Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>

Enable primary controller usb0 in drd mode, usb1 and micro usb2 in
host mode.

Change-Id: Ic298074c8cc14a5b5fdad2283ff6e0cb19d8ba00
Signed-off-by: Akash Kumar <quic_akakum@quicinc.com>

Add a property to SE node that indicates whether
the firmware should be loaded from Linux, along with the
transfer mode details.

Change-Id: I8e5332b7c31f4ab82ef3f044fd283ad4ddda52e6
Signed-off-by: Mehul Raninga <quic_mraninga@quicinc.com>

This reverts commit 2fe8ecbe.

Signed-off-by: Linux Build Service Account <lnxbuild@localhost>
Change-Id: I2834cb4aac3b3f4abbaecbc4c817f76da12d4617

Add ICE node in eMMC device tree node to enable inline
encryption support.

Change-Id: Ie0e4c59d6fa6e4a90fca0d57dd6f8e7614692736
Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>

This reverts commit e1277958.

Reason for revert: Camera broke on tip.

Change-Id: I1e9eb500403b183a6dd5a256289e4e16e1167a47
Signed-off-by: Salendarsingh Gaud <quic_sgaud@quicinc.com>

This reverts commit 3748c354.

Reason for revert: Camera functionality is broken on QCLINUX.

Change-Id: I7120c3032f5e6d8d759b9912b872b1eb2cfc90f7
Signed-off-by: Salendarsingh Gaud <quic_sgaud@quicinc.com>

Certain commits previously changed the dr_mode from host to
"otg" as a mistake during backporting and trying to enable
EUD. Fix them up and mark all non-primary ports as host only
supported.

Fixes: 17bccce5 ("PENDING: arm64: dts: qcom: sa8775p: Add EUD dt node")
Change-Id: I16b93225ff1f277003f38d2eaa349d64e227e7bb
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>

Enable cpu idle injection cooling maps for all cpu tsens for
qcs9075 platforms.

Change-Id: Ib81126664951a2b3030e297fbd0ec188d7c5c8af
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>

GPIO147 of qcs9075 services as BT_I2S_0_SDO and bootstrap
pin EDL_MODE for WCN6855, need to set this pin as logic
high when enable Bluetooth.

Change-Id: If677a53db74b9ea9608b2818f5964421a09c11c8
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>

Add wlan support for qcs9075-rb8 board.

Change-Id: Ib3431329d68128d4a4e21018c4439ead61bffb9c
Signed-off-by: Zhi Chen <quic_zhichen@quicinc.com>

Add device tree support for the QCS9075 Ride & Ride-Rev3 addons.

Change-Id: I173ddb866428be16eaf6c9b5a1a7a10d44aee158
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>

Add device tree support for the QCS9075 RB8 addons.

Change-Id: I29afe3e03bea10edf6494565191f8358db201aa9
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>

Add CONFIG_SENSOR_EMC2305 for EMC2305 driver.

Change-Id: Ic035e362ae38988f5c9c526b75880d759a19c8cf
Signed-off-by: Zhengchun Li <quic_zhengchu@quicinc.com>