--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@9982711f

Move deploy jobs to deploy runner

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@e48b4c0b

package_release: Do not fail if a file does not exist

--

Commit: seco-ne/kernel/linux-imx-kuk@167064ea



Input: atmel_mxt_ts - fix up inverted RESET handler

This driver uses GPIO descriptors to drive the touchscreen RESET line. In
the existing device trees this has in conflict with intution been flagged
as GPIO_ACTIVE_HIGH and the driver then applies the reverse action by
driving the line low (setting to 0) to enter reset state and driving the
line high (setting to 1) to get out of reset state.

The correct way to handle active low GPIO lines is to provide the
GPIO_ACTIVE_LOW in the device tree (thus properly describing the hardware)
and letting the GPIO framework invert the assertion (driving high) to a
low level and vice versa.

This is considered a bug since the device trees are incorrectly
mis-specifying the line as active high.

Fix the driver and all device trees specifying a reset line.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201104153032.1387747-1-linus.walleij@linaro.org


Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

--

Commit: seco-ne/kernel/linux-imx-kuk@d579575d

dts:tanaro: Fix pixel clock and framerate for 10.1 Dataimage SCX1001255GGU06 display

Adapt pixelclock to 71MHz, fixed clock tree.

BCS 746-001034

(cherry picked from commit b33f9429cb5fb55f83008f225d9e75c46cfa9b96)

--

Commit: seco-ne/kernel/linux-imx-kuk@910f3238

dts:tanaro: Add support for 10.1 Fannal FN1010D013C display and touch

BCS 746-001034

(cherry picked from commit 9b958c666231b0adef57e1f4a313c30127f85333)
(cherry picked from commit f080c69fed1b4e77f4e86f3b146fe80d79a0e3ec)
dts:tanaro:Fannal 10.1" display: improve timing, works with SSC now
(cherry picked from commit 6f218c55b2c6ebc4d75b95ad86f43ddc48962c3e)

--

Commit: seco-ne/kernel/linux-imx-kuk@6cdb4709

seco-mx8mm: Allow to specify the VIDIO_PLL1_RATE as define

This is a bit hacky but currently I don't know a better solution.

Though the doc say assigned-clock-parents may not be used to set clock rates
if there are multiple consumers this is used here widely.
( see Documentation/devicetree/bindings/clock/clock-bindings.txt line 164)
To allow to change this in devicetree using this file, this macro is
introduced, using the default value from before as default.

BCS 746-001034

(cherry picked from commit 89848b5e14a04f548dd17b494225bdbb488b7ccd)

--

Commit: seco-ne/kernel/linux-imx-kuk@2bd87764

mx8m:sec-dsim: Add message to sec-dsim to print out resulting pixel clock rate

BCS 746-001034

(cherry picked from commit afc2f90581071da9634e5274063a0feca2ae2e66)

--

Commit: seco-ne/kernel/linux-imx-kuk@ae2c2a4b

seco-mx8mm:tanaro:clk-pll14xx:video-pll1: Add additional setpoint for 700MHz

The pll only has a few preconfigured settings. This adds 700MHz
to achieve additional pixel clocks.

BCS 746-001034

(cherry picked from commit b320dc652efe84a715bf7dfeb26e31bc222ec192)

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@e10430b6

tanaro: Disable display support in defconfig

We don't want to handle the display timings in u-boot as well, and start
the display with the kernel bootlogo instead.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a5e27f6e

FTP upload: Add flag to hide FTP upload stage

This is a workaround to prevent customer releases being uploaded to our
public FTP area. It should be removed as soon as we support uploading to
different FTP target folders.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@543a2170

manifest_package: add release suffix

Customer specific manifest projects can now set the RELEASE_SUFFIX
variable, which then gets appended to the deployment folder names.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c763c43f

alphaplan_fwr: change variable "release_name_local" to "release_name"

Otherwise it can be assumed that it might be correlated with
outputdir_local, which is not the case.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@2d8d26a5

package_release: more refactoring

- Make output-dir an argument that can be passed multiple times instead
  of hard-coding two dirs with certain meanings.
- Remove LOCALDIR variable from package.env, because it is not used
  anywhere (only occurence was job class ".uploadsdkftp" which wasn't
  used anywhere either).

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@dc3698c8

package_release: refactoring

Improve readability of package_release.py and its submodule
generate_release_metadata.py.

- Add describing comments throughout the file.
- Remove duplicate code from functions. Simplify them, so that they do
  what their names say (and nothing more).
- Rename variables and function arguments to make their purpose clearer.
- Harmonize variable names with their corresponding command line arguments.
- Add pydoc for functions.
- Add type declarations to function arguments.
- Generate MD5 and metadata files in the source directories so that they
  can be copied along with the rest of the files.

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@1330fad5

MC3: Fix missing LPDDR4 RAM setting

During integration of MC3 LPDDR4 RAM settings with 3733 MTS Trizeps RAM
settings for some reason one line of the MC3 RAM settings got lost,
resulting in training for 400 MTS to fail on MC3.

This patch re-insert the missing line. Now MC3 400 MTS training is
working again.

--

Commit: seco-ne/kernel/linux-guf@0fa8a7d7

audio:mqs: Fix audio popping when using the MQS

The i.MX6 ULL has an audio block equipped, that can generate audio via a
standard GPIO. Since the MQS (Medium Quality Sound) is a very basic audio
interface, it doesn't provide any filtering of unwanted artifacts in the
audio stream. This leads to a popping noise when playing audio on the
Nallino. The patch changes the SAI to always generate a signal for the
MQS and transfers the control of the external amplifier to the MQS driver.
This helps in reducing the noticeable interference when playing audio.

Original patch-set by Sam Crossman <sam.crossman@seco.com>

f750e64c3eb2a6e842ddf596b622e27628014cc0
22e654f06977e670f290075458163ff38130cff3
5b432bde337e97302e03fbdabc2641c74c4cfa13

BCS 746-001052

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@36e07a27

trizeps8plus/mc3: Add fuse decoding for RAM size

The code to readout the fuses that define the installed RAM size have
not been implemented for trizeps8plus. Merged the related code from
trizeps8mini into the trizeps8plus board file and adapted the defines
to use 1GB Ram without fuses, used for MC3.

The PHYS_RAM_SIZE define is now set to 3GB as this is also used to
define the RAM mapping, where 3GB is addressable.

BCS 746-001065

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c831d1da

get_integration_sources: check if CI is enabled

Trying to query CI variables on a project which does not have the CI
feature enabled leads to an HTTP 403 (forbidden) error.
Check whether CI is enabled using the "jobs_enabled" flag.

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@e5db3c18

cmd:guf: Disabled debug output

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@5e3dfaea

CI:deploy: fix fngsystem deployment path

The match to detect fngsystem still contained 'guf'. Changed to 'seco'.

BCS 746-001043

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@c432389c

Removed rearrangement of the USDHC busses

The USDHC busses had been rearranged, because we have a different pin mapping
on the MC3 (as compared to the Trizeps modules and the DE).
We now have a boot bus detection, which sets the correct bus for the boot
scripts. This makes the rearrangement obsolete.
Removing the rearrangement also fixes an error in the save function for the
environment, which mixes the boot bus with the device tree definitions.

BCS 746-000814

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@fb5fcbc7

cmd:guf: Added boot bus detection to guf sub-system

The boot bus detection sets an environment variable that contains the USDHC
bus, from which U-Boot was started. The variable is used in the search for the
boot scripts and prevents U-Boot from mixing up the eMMC and SD-Card.

BCS 746-000814

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f8d6de86

Make check error message more verbose

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@21e7edeb

Improve ci-test build

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@76bd81d8

Fix check job rules

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a6721243

Move check job to parent pipeline

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@593784e1

Refactor check_if_integration_branch_is_up_to_date

- Use "source" and "target" terminology in the script, just like in the
  GitLab CI variables.
- Spefify data types for function arguments.
- Rename function arguments to better reflect their data types.
- Move determination of integration branch into main function, so that
  the successfull status message can be more verbose.
- Remove parent_merge_request feature and checking for gitlab-ci
  integrations, because the check job does not run on gitlab-ci
  integration branches at all.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@45b49ee3

Remove build stage on master

We don't need to explicitly trigger a build after merging changes in
gitlab-ci. A master pipeline on the target projects runs automatically.

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@50a24cfe

spl: Print selected config ( devicetree name) during startup

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@72b70c39

mc3: distinct between mc3 and trizeps8plus during spl boot

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@1b5b617d

add basic MC3 support

This patch adds basic MC3 support to U-Boot.
Note: This currently only partially integrates with
Trizeps VIII Plus support and in several places still breaks
the Trizeps support.

This still needs quite a bit of clean-up, esp. regarding:
 * eMMC configuration
 * pun-muxing
 * separate DTs

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@af12e8a8

bootselect: Add rtc and gpio for mc3, fixed 'high active' mode for bootmode gpio

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@49be8343

dts:mx8mp: Change order of mmc

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@a1eebf1c

dts:mx8mp: Fixed error on eMMC due to missing pull-up

The pull-up of the CMD line of the eMMC isn't placed on the hardware.
Therefore, the internal pull-up of the pad is required, for the CMD line
to function properly.
Also increased the clock rate to 400 MHz (see NXP EVK) and assigned the
correct regulators (the eMMC uses fixed power rails for 1.8 V and 3.3 V).

Cherry-pick from linux-imx-kuk c8c74463 and 482dc0dc

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@ba5e2bf8

config:dts:mc3: Added separate devicetree for MC3

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@11b4ff7d

maincontroller3: Initial modifications to boot mc3

Boots fngsystem (kernel 5.15) via uuu

The modifications are taken from Marcs diff (US 746-000812). I just had
to reenable the FASTBOOT functionalities in
configs/trizeps8plus_defconfig. Keep in mind that the correct bl31
binary is required.

--

Commit: seco-ne/kernel/linux-imx-kuk@df93942a

arm64: dts: tanaro: Add device tree for scx1001255ggu06

Add the device tree for the touch display set SCX1001255GGU06 including
the LCD panel FG1001L0DSSWMG01 and an SIS touch.
The panel is connected via LVDS.

The current state does not work as expected. It seems the MIPI signals
are not clocked out correctly. So we use a reduced pixel clock to get a
working display. This results in a reduced frame rate of ~42 fps.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a0f7e84f

Rename pipeline stages to reflect YAML filenames

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@d25cdebf

Really fix potential error message in retrigger job

TypeError: 'NoneType' object is not subscriptable

Example:
https://git.seco.com/seco-ne/yocto/manifest/-/jobs/129201

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@3eef782e

deploy_gitlab_ci: integrate only correct projects into the manifest

Previously we integrated all projects into the manifest, even those that
belonged to a different manifest branch. That led to all manifests
having the same project revisions, even if they should be different due
to different intgrated project branches.

Save a list of integration sources for each manifest branch separately
now, so that we can check which project belongs to which manifest branch
later.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@2b851ac6

Fix potential error message in retrigger job

TypeError: 'NoneType' object is not subscriptable
Example:
https://git.seco.com/seco-ne/yocto/infrastructure/ci-test/minimal-manifest/-/jobs/127610

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c3fd0ecc

Check if variable is defined before checking it value

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c1be0f4b

Fix jinja2 "or" operator

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8da534ec

Run integration pipeline for target branch only

When we're integrating a single branch into a single manifest branch,
there is no need to run the intgeration pipeline for all configured
integrations, but only for those that match the target branch of the
current merge request.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8c94b725

ci-test: add job to check for correct foo branch

This should catch an error where during a gitlab-ci merge process the
wrong foo branch is integrated into the manifest, which happened in
Yocto.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@163c7e1e

Add yml extension to jinja2 templates

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@59523aa0

check job: disable verbose output

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@28bf0065

retrigger: add job states to log message

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@fd742017

deploy_gitlab_ci: fix target branch in integration merge request

We need to pass the correct target branch to the merge request creation
instead of using the project's default branch.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@38379173

Run yamllint job on gitlab-ci integrations

Otherwise no pipeline is created at all in these merge requests, which
prevents the MR from being merged.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@dce4f8a3

changelog_generator: Fix machine project ID

We have deleted the original project due to git corruption. Replace with
the new project's ID.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a7aa7c26

deploy_gitlab_ci: fix project argument passing

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8a38f194

Put all manifest intgeration jobs into a single stage

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a09564c1

deploy_gitlab_ci: explicitly pass gitlab-ci project and branch

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@172e7625

Improve error messages

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f0f5a370

Improve naming of functions and variables

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c8b484ca

Retrigger MRs from all integrating projects

Instead of getting the projects from the manifest file, search them via
their INTEGRATION variable.

Improve log messages on this occasion: print URL instead of just IDs.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@5e75bfc1

Deploy gitlab-ci to multiple branches

Add different integration jobs for different manifest branches. The
merge stage only has one job for each manifest, though, because
otherwise we cannot guarantee a consistent state for all branches.

Extend the deploy script for this purpose, so that it can deploy to
multiple manifest branches at once.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@771dcff1

Fix temporary dir path

We were passing the complete TemporaryDirectory object to the repo clone
function instead of just the path string, resulting in the repo being
cloned into a local dir "<TemporaryDirectory '/tmp/tmphwakypf8'>".

Fix this to actually use the generated temp dir.

This change makes it necessary to keep the TemporaryDirectory object
reference until we don't need the directory anymore, otherwise it will
be removed immediately.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@dce219c8

Print less important output in grey color

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@5e36261d

deploy_gitlab_ci: remove hard-coded integration targets

Get targets dynamically using the INTEGRATION variable instead.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@94cd6781

Recurse to child pipelines on retrigger

This makes it possible to retrigger jobs that are not part of the
given pipeline but in any nested child pipeline of it.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@fb1219a7

Ignore __pycache__ in scripts directory

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@0c29c995

Refactoring: rename arguments for consistency

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@d461090b

Remove hard coded project and branch variables

MANIFEST_PROJECT, MASTER_BRANCH_MANIFEST, MASTER_BRANCH_PROJECT

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a4aae414

Add rules for integration pipeline

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@bfa38b24

Improve log messages

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@1c9670d9

commit_and_push: do not pass branch

Branch can be implicitly determined via the repo.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@91dc115a

repo: do not exclude tags

We have created tags in our poky repo which are needed by repo, e.g.
https://git.seco.com/seco-ne/3rd-party/yocto/poky/-/tags/seconorth%2Fkirkstone-4.0.0

Do not explicitly exclude tags in order to fetch them.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@5c2defce

CI: prepare to work also with renamed machine names lime seco-mx6

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@6b05be5f

Added LPDDR4 3733MT/s Rate and use it as default for Trizeps VIII Plus and 2GB RAM

(cherry picked from commit 7548225eb70d2d28ba4feff6ac63d7c21389279f)

--

Commit: seco-ne/tools/guf-show-demo@e7f7f170

Rename default branch to main

--

Commit: seco-ne/kernel/modules/gfplatdetect@3698d34a

Rename default branch to main

--

Commit: seco-ne/tools/gf-productiontests@3a5a04ea

Rename default branch to main

--

Commit: seco-ne/tools/gfxml2dto@7aef6df6

Rename default branch to main

--

Commit: seco-ne/tools/touchcal-conv@67bacd86

Rename default branch to main

--

Commit: seco-ne/tools/xconfig@f6c3e8a7

Rename default branch to main

--

Commit: seco-ne/3rd-party/kuk/uboot-imx-kuk@a480fd4d

defconfig: Added missing raw initramfs and realtek driver

Added the support for old and raw initramfs images to U-Boot.
Also added the driver for Realtek phys to U-Boot.


(cherry picked from commit 47242cec318ca16fd56cab2704563fedd5aa471f)

--

Commit: seco-ne/kernel/linux-imx-kuk@a40f7a72

dts: Add a customized devicetree for the new trizeps8plus revision v1r3

Changed PHY properties for the RTL8211F(I) ethernet PHY.
The new audio codec is not supported at this time.
Created a new dts file for the dual-espresso board and the
trizeps8plus_v1r3 revision.

BCS 746-000835

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@ef08f4ef

deploy: Increase deploy timeout to 30min

Especially when downloading the SDK the deploy takes longer than 10min.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@968aaadd

build-jobs: Remove dump_install_command from buildsdk job

When the dump_install_command script is executed in the SDK build step
an error occurs because the fng-install script/vars are not available.

--

Commit: seco-ne/kernel/linux-imx-kuk@a72cb6a2

dual-espresso:RTC:dts: Enable wakealarm feature

Added wakeupsource and interrupt for RTC rv3028.
Now wakealarm the is available at: /sys/class/rtc/rtc0/wakealarm

BCS 746-000767

--

Commit: seco-ne/kernel/linux-imx-kuk@a2d5b6e4

dts: Changed secure element in the Tanaro DT

The A71CF of the Tanaro wasn't accessible because the reset line
wasn't configured properly.
The configuration of the device itself is still not working.

--

Commit: seco-ne/tools/qt-multi-screen-compositor@410b9b56

Config:systemd: Invoke systemd notify when the compositor is ready

Now the compositor calls systemd notify READY=1 when surfaces can be
created. This allows the use of a systemd notify type start script.

BCS 746-000824

--

Commit: seco-ne/kernel/linux-guf@5d2e0fb4

arm: dts: NALLINO: Adjust drive strengths

As requested by the EE department adjust the drive strengths for LCD,
SD1 and Backlight PWM.

BCS 746-000990

--

Commit: seco-ne/kernel/linux-guf@aac44baf

arm: dts: NALLINO: Activate SSC and assign PLL2_PFD1 as LCDIF clock parent

In order to jitter the Display the LCDIF clock need to be derived from
the PLL2 which supports Spread Spectrum clocking.

With this and the OS and RAM validation tests Spread Spectrum can be
generally used. Thus enable it by default.

BCS 746-000990

--

Commit: seco-ne/kernel/linux-guf@30adc80b

arm: dts: Add muxing for ecSPI on NALLINO

Prepare the use of the SPI interface on the keypad. Add the pin muxing
and the ecspi node, however leave the status "disabled".
The default mode for the corresponding keypad pins is GPIO.

BCS 746-000993

--

Commit: seco-ne/kernel/linux-guf@f7a96c37

arm: dts: Nallino: Add keypad GPIO names

Add the names for the keypad GPIOs. By default thse should be muxed as
GPIO (inputs). By using the gpiod tooling it should be possible to make
use of them.

BCS 746-000993

--

Commit: seco-ne/kernel/linux-guf@0c1c9ad5

arm: dts: Add NALLINO PWM beeper

Add the support for the PWM5 and the connected on-board beeper to the
SECO Northern Europe NALLINO platform.

BCS 746-000992