Integrate linux-imx-kuk/add-fannal-10.1-support

--

Commit: seco-ne/kernel/linux-imx-kuk@b33f9429

dts:tanaro: Fix pixel clock and framerate for 10.1 Dataimage SCX1001255GGU06 display

Adapt pixelclock to 71MHz, fixed clock tree.

BCS 746-001034

--

Commit: seco-ne/kernel/linux-imx-kuk@9b958c66

dts:tanaro: Add support for 10.1 Fannal FN1010D013C display

BCS 746-001034

--

Commit: seco-ne/kernel/linux-imx-kuk@89848b5e

seco-mx8mm: Allow to specify the VIDIO_PLL1_RATE as define

This is a bit hacky but currently I don't know a better solution.

Though the doc say assigned-clock-parents may not be used to set clock rates
if there are multiple consumers this is used here widely.
( see Documentation/devicetree/bindings/clock/clock-bindings.txt line 164)
To allow to change this in devicetree using this file, this macro is
introduced, using the default value from before as default.

BCS 746-001034

--

Commit: seco-ne/kernel/linux-imx-kuk@afc2f905

mx8m:sec-dsim: Add message to sec-dsim to print out resulting pixel clock rate

BCS 746-001034

--

Commit: seco-ne/kernel/linux-imx-kuk@b320dc65

seco-mx8mm:tanaro:clk-pll14xx:video-pll1: Add additional setpoint for 700MHz

The pll only has a few preconfigured settings. This adds 700MHz
to achieve additional pixel clocks.

BCS 746-001034

SRCREV.conf

@@ -8,7 +8,7 @@ SRCREV:pn-seco-show-demo = "ea881d2ee34a05ba9673b8af7e319dcf0b1d551e"
 SRCREV:pn-libmdb = "cb429674f2684641a37df27b4a9e981228f6f249"
 SRCREV:pn-linux-guf = "0142c5bc8f2c1e94e674bfeb3b2cc6a9fe818761"
 SRCREV:pn-linux-seconorth = "950d673c5117fa096a68eff2988d67838a4a0a29"
-SRCREV:pn-linux-imx = "8759a1473d7999828c68343b0b9db63ab3c9eac7"
+SRCREV:pn-linux-imx = "b33f9429cb5fb55f83008f225d9e75c46cfa9b96"
 SRCREV:pn-linux-imx-kuk = "0258f07c61364958e3307da11a388e72baffb03a"
 SRCREV:pn-touchcal-conv = "cb6ba139e7ada762368f43e5b87194a7fadec6e0"
 SRCREV:pn-u-boot-imx = "f342a71af7adbdeca69d2686866e53a7ac709c2e"