The default debug level tends to clutter all connected terminals...

Currently it is supposed to be used for wifi testing only.

The recipes are taken from the https://github.com/nxp-imx/imx-manifest
bbd8ab1 imx-linux-mickledore  imx-6.1.55-2.2.0_desktop.xml: Add LDP Q4 manifest
bsp.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@e207c443

gitlab-ci: Disable sourcery

The sourcery plugin fails again due to a missing login. Disable it for
now.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a3d1e77c

manifest:integration: Fix issue in trigger/include

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@b6e66192

pipelines:build: Add check to JSON generation

Without the check, we have a race condition when building from sources
outside of the Yocto group.

Dmitry Petrov authored 1 year ago and Jonas Höppner committed 1 year ago

This is a part of fix for issue [746-000797] Flash-N-Go System: Implement
"Disable serial console".
This allows to set console=ttynull in kernel cmdline.

Signed-off-by: Dmitry Petrov <dmitry.petrov@rtsoft.de>


(cherry picked from commit 6be55816)

This patch adds kernel driver support for the TLV3204 audio-codec on the
B79 carrier-board and the TAS2505 audio-codec on the ModularVision
carrier-board.

(Both audio-codecs are support by the same driver).

For the older kernels (5.10) the build of dtbo's is not supported in the
kernel, so overlay.dtb is used here. This change allow to fallback to
the old naming when search for the detected overlays.

Mikhail Vanyulin authored 1 year ago and Jonas Höppner committed 1 year ago

Added sd_no_console to UBOOT_CONFIG and set corresponding defconfig for
machines, that use u-boot:
   seco-mx6
   seco-mx8mm
   seco-mx8mp

Signed-off-by: Mikhail Vanyulin <mikhail.vanyulin@rtsoft.de>

Mikhail Vanyulin authored 1 year ago and Jonas Höppner committed 1 year ago

UBOOT_CONFIG variable can hold multiple values.
Redefined base build steps to support that.
As a result - multiple imx-boot binaries will be generated:
    imx-boot-seco-mx8mm-sd.bin-flash_evk
    imx-boot-seco-mx8mm-sd.bin-flash_evk.tar.gz
    imx-boot-seco-mx8mm-sd_no_console.bin-flash_evk
    imx-boot-seco-mx8mm-sd_no_console.bin-flash_evk.tar.gz

The short link to the u-boot tar.gz is also created for all variants
(with a little hacky name creation).

fngboot.bin is required to boot fngsystem in recovery mode via uuu.

Dmitry Petrov authored 1 year ago and Jonas Höppner committed 1 year ago

Add custom defconfig for i.MX6 ULL boards (NALLINO) for NXP based kernel.
The reference defconfig: recipes-kernel/linux/linux-seconorth-5.15/seco-mx6ull/defconfig

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@42bfe4f0

build:prepare: Add setup script for Git Credentials

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@24653ff8

build:machines: Add i.MX93 to the build job template

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@7aae72ea

Re-enable sourcery

With the free open source plan, sourcery works only when called from the
repository's root directory. Re-enable it by calling it from there.

Also apply sourcery's suggestions to file generate_firmware_package.py,
which did not exist before disabling sourcery.

In the dual-espresso devicetree we enabled the new cap1293 cap. touch
sensor. To remain compatible for devices with the old at42qt1011 sensors,
a corresponding overlay is added that can be applied during installation.

BCS 746-001576

BCS 746-001576

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@51e0cf67

build:stages: Add Firmware Package JSON stage

The old Alphaplan stage is deprecated and was removed in a prior commit.
Add new stage to generate the Firmware Package JSON files that do replace
the old Alphaplan articles.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@1830cb02

And another improvement for the build-up-to-date job

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f7f33de5

Improve the output message in the build-up-to-date job a bit more

Use explicit line breaks to make the message look better.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@68aaab94

Improve the output message in the build-up-to-date job

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@26b9eb1d

Rename "check" job to "build-up-to-date"

This is a more meaningful name and might give a hint what the job does.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@07f0c898

Make build runner tag configurable

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@0d70d719

Disable sourcery check

Sourcery changed its license model to only be available for open source
projects with the free plan. According to the documentation, sourcery
should detect automatically whether it is running on an open source
repo. This does not work in our case, though. Disable it until we find a
way to correctly make it work.

BCS 746-001569

This patch adds the D18/Levy Device Tree to the U-Boot image.

We need an additional override that has a higher prio than the ones from
meta-freescale but still can be overridden by specific machine overrides
(e.g. seco-mx8mp).
The override is intended for vendor specific config files (e.g.
weston.ini).

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@9be2c52b

pipeline:build: Fix indentation of here-doc

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@245e6537

pipeline:build: Make generation of install script optional

The Genio 700 platform doesn't have an fng_install.sh. Currently, the
pipeline fails because of the exit code in the script check.
Make the generation of the install command optional and only show a
warning if the script is missing.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8fedce8a

pipeline:build: Add MediaTek Genio 700 SoC

The SECO drivers have been ported from the 5.10 Kernel.
Enable them for the 5.15 Kernel too.

Dmitry Petrov authored 1 year ago and Tobias Kahlki committed 1 year ago

To support Nallino board, add imx6ull SoC specific configs:
 - add an imx6ull machine config itself;
 - adjust corresponding kernel config.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@6f773de5

Remove Alphaplan stage

We do not use Alphaplan anymore. Remove everything Alphaplan related
stuff from the pipeline.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@56bd1900

Confluence: add helper script to get page content

This can be helpful if something is configurable in the GUI editor and
we can't figure out to do the same thing via the API.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c3b794c6

Confluence: enforce fixed page width on creation

On page creation via the API, the page always seems to be created with
full width, even if "full_width=False" is set. Update the page right
after creating it in order to correctly set it to fixed width.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@82053a2f

Confluence: set width for download table columns

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@96f5745c

Confluence: group download files by type

The logo is dynamically replaced via an append to the do_compile in the
Kernel recipe. For this to work, the fngsystem logo has to be disabled
in the defconfig.

The new SECO logo has a black background. Change the fbcon background to
black too.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@3697b4ea

cancel_pipelines: reverse order of cancellation

Cancel parent pipeline first before cancelling its children in order not
to have failed parent pipelines (trigger jobs are failed if their
downstream pipeline is cancelled).

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@5f4ca2fb

cancel_pipelines: list actually cancelled (child-)pipelines

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c80cba84

Cancel all pipelines on newer commit

We already canceled running pipelines before. Gitlab, however, might
have already canceled previous pipelines automatically, but without
canceling their child pipelines.
Remove the "running" status filter when cancelling pipelines, so that
also already cancelled pipelines will be included.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@84eb6e22

Revert "Cancel all pipelines on newer commit"

This reverts commit f7582b74e7c565d55bb8a0315fe75c4ab4385fa2.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f7582b74

Cancel all pipelines on newer commit

We already canceled running pipelines before. Gitlab, however, might
have already canceled previous pipelines automatically, but without
canceling their child pipelines.
Extend the mechanism now to cancel all pipelines up to and including
"running" as well as "canceled" states.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@0ec55c07

Fix list() call in update_submodule

Here we don't just iterate over the results, so we have to use
"all=True" instead of "as_list=False". See previous commit for
explaination.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@4b3a517e

Make sure to get all items on Gitlab list() calls

The list() call on Gitlab classes uses pagination per default. If the
number of items exceeds a certain limit, we only get a part of the
results. We can pass "all=True" to the calls in order to disable
pagination and get all results.
If we're looping over the items, though, the recommended way of getting
them is to use a generator object, which works calling list() with
"as_list=False". See documentation for reference:

https://python-gitlab.readthedocs.io/en/v2.10.1/api-usage.html#pagination

Note: the "as_list" argument is deprecated in newer versions of the
python-gitlab library, in favor of the newer "iterator=True":
https://python-gitlab.readthedocs.io/en/v3.6.0/changelog.html#feature
We are using v2.10.1 of the library, though, so this commit also updates
calls using the new way, which is not working with our version.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c292d144

Confluence: combine data from parallel child pipelines

We deploy Yocto image and SDK in different pipelines, which both have
their Confluence jobs with the same Confluence target. Previously these
pipelines have been independent, so that running the Confluence job in
one of them would overwrite the Confluence page if it has been run in
the other pipeline before. Hence we could either have the image files or
the SDK files in the Confluence page.
Combine these now by checking for other parallel child pipelines with
the same Confluence configuration, so that running the Confluence jobs
in the Yocto pipeline also includes the information from the SDK build
and vice versa.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@53106170

Fix ci-test SDK version

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@d6d4ab61

Fix ci-test SDK download

Since the implementation of multiple child pipelines we cannot use the
previous artifacts download links anymore specifying tag and job name,
because the jobs for image build and SDK build are equal. Use direct
download links instead via job number.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@bc85e805

Build documentation in Yocto

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@0a3b1406

Confluence: get only those build jobs with a corresponding successful deploy job

We cannot handle build jobs and deploy jobs similarly, because all build
jobs are successful usually, while not all deploy jobs necessarily have
run. Get build.env only from those build job which have a corresponding
successful deploy job, otherwise MACHINE and SUPPORTED_HARDWARE fields
always contain the full list of built platforms, even if they might have
not been deployed.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@97228cdb

Move MACHINE variable from deploy.env to build.env

The Confluence stage is the only stage that needs the MACHINE variable.
Since the collect_release_information script already loads the build.env
from the build jobs, there is no need to store this variable in
deploy.env.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@ba156b0f

Confluence: check if variables are defined

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@cae6e282

Confluence: improve variable passing to template

Use a general mechanism of storing all job variables for each build job
separately, so that we have all documentation files in the
FILES_documentation variable. This makes the dedicated HTML_FILES
variable obsolete.
The merged variables are still kept, though, so that we have all
machines in the MACHINE variable to loop over.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@41f8a49f

Confluence: add error handling if artifact not found

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@1a519057

Make documentation files configurable

This disables the documentation jobs for SDK and FNGSystem.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@303e24eb

Build documentation in dedicated job

Previously the documentation files were rendered as part of the package
jobs. Each package job converted the same set of static markdown files
to HTML files, which was redundant.

Add dedicated jobs to build, package and deploy the documentation files.

Modify convert_md2html.py to support file globs as arguments.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@838da585

Refactoring: move Alphaplan stage code to the end

This reflects the stage order in the code.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@ff31d083

Refactoring: use multiple MACHINE loops for better structure

This is a preparation for adding dedicated documentation jobs. In order
to have these grouped by stage along with their corresponding machine
jobs, we have to get rid of the giant outer loop and add loops for each
stage instead.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@69973c95

Deploy: save deployed files in dotenv variable instead of dedicated file

Previously the deployed files were stored in a dedicated text file
called files.txt. Move this information to a dotenv variable called
FILES, so that we don't need special handling for it in the Confluence
stage.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@45d04033

Remove disabling sourcery low-code-quality in package_release

This check is not failing anymore since the latest refactorings.

Prior to this, we had expressions in the distro, which bootscript is
needed. This changes it to normal package dependency expression with a
new package-group as 'starting point' to include the bootscripts needed.

They where created by the bootscript before but are only used by the
postinstallation steps in yocto-install-ontarget.

Mikhail Vanyulin authored 1 year ago and Jonas Höppner committed 1 year ago

boot.cfg and similar files are installed into /boot folder of rootfs.
For the rauc bootfs-image and the WIC image they are also needed in the
deploy folder and the IMAGE_BOOT_FILES variable.
As the selection of the specific bootfiles is already done using the
packages, the IMAGE_BOOT_FILES variable is configured to install
everything from the boot/ subdir in the deploy path and the packages
deploy the needed scripts there.

Signed-off-by: Mikhail Vanyulin <mikhail.vanyulin@rtsoft.de>