--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@9be2c52b

pipeline:build: Fix indentation of here-doc

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@245e6537

pipeline:build: Make generation of install script optional

The Genio 700 platform doesn't have an fng_install.sh. Currently, the
pipeline fails because of the exit code in the script check.
Make the generation of the install command optional and only show a
warning if the script is missing.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8fedce8a

pipeline:build: Add MediaTek Genio 700 SoC

Dietmar Muscholik authored 1 year ago and Tobias Kahlki committed 1 year ago

 drm_bridge_get_next_bridge() may return NULL if there is no successor.
 Dereferencing this pointer causes the kernel to hang.

Dietmar Muscholik authored 1 year ago and Tobias Kahlki committed 1 year ago

  This is ugly because in this driver everything is hard coded, it consists of
  over 5000 lines and whenever a new display is needed it grows about at least
  40 lines. We should find a way to make this driver obsolet.

Dietmar Muscholik authored 1 year ago and Tobias Kahlki committed 1 year ago

  A SECO-version of the driver for EDT FocalTech touch added. It would be
  nicer to find out why the original driver does not behave as expected
  and correct it.

Dietmar Muscholik authored 1 year ago and Tobias Kahlki committed 1 year ago

  Trizeps8 modules may be equipped with a FPGA that serves as a bridge between
  DSI and RBG. All this driver does is enable this function by sending a
  command over I2C to the FPGA.

Jonas Höppner authored 1 year ago and Tobias Kahlki committed 1 year ago

The trizeps modules may be equipped with an MCU that exposes different
features like gpio and touch.
This driver is based on kuk_tr8mcu_touch.c but splits up into an mfd
part and implements the gpio part. Further features are not yet
available.

BCS 746-00127

Hard code timings for the FX050053DSSWBG01 display, which is used on
SANTINO LT x2l

Hard code timings for the FX050053DSSWBG01 display, which is used on
NALLINO S 5.0 OF PCT device out of box, in device tree.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@6f773de5

Remove Alphaplan stage

We do not use Alphaplan anymore. Remove everything Alphaplan related
stuff from the pipeline.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@56bd1900

Confluence: add helper script to get page content

This can be helpful if something is configurable in the GUI editor and
we can't figure out to do the same thing via the API.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c3b794c6

Confluence: enforce fixed page width on creation

On page creation via the API, the page always seems to be created with
full width, even if "full_width=False" is set. Update the page right
after creating it in order to correctly set it to fixed width.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@82053a2f

Confluence: set width for download table columns

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@96f5745c

Confluence: group download files by type

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@3697b4ea

cancel_pipelines: reverse order of cancellation

Cancel parent pipeline first before cancelling its children in order not
to have failed parent pipelines (trigger jobs are failed if their
downstream pipeline is cancelled).

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@5f4ca2fb

cancel_pipelines: list actually cancelled (child-)pipelines

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c80cba84

Cancel all pipelines on newer commit

We already canceled running pipelines before. Gitlab, however, might
have already canceled previous pipelines automatically, but without
canceling their child pipelines.
Remove the "running" status filter when cancelling pipelines, so that
also already cancelled pipelines will be included.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@84eb6e22

Revert "Cancel all pipelines on newer commit"

This reverts commit f7582b74e7c565d55bb8a0315fe75c4ab4385fa2.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f7582b74

Cancel all pipelines on newer commit

We already canceled running pipelines before. Gitlab, however, might
have already canceled previous pipelines automatically, but without
canceling their child pipelines.
Extend the mechanism now to cancel all pipelines up to and including
"running" as well as "canceled" states.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@0ec55c07

Fix list() call in update_submodule

Here we don't just iterate over the results, so we have to use
"all=True" instead of "as_list=False". See previous commit for
explaination.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@4b3a517e

Make sure to get all items on Gitlab list() calls

The list() call on Gitlab classes uses pagination per default. If the
number of items exceeds a certain limit, we only get a part of the
results. We can pass "all=True" to the calls in order to disable
pagination and get all results.
If we're looping over the items, though, the recommended way of getting
them is to use a generator object, which works calling list() with
"as_list=False". See documentation for reference:

https://python-gitlab.readthedocs.io/en/v2.10.1/api-usage.html#pagination

Note: the "as_list" argument is deprecated in newer versions of the
python-gitlab library, in favor of the newer "iterator=True":
https://python-gitlab.readthedocs.io/en/v3.6.0/changelog.html#feature
We are using v2.10.1 of the library, though, so this commit also updates
calls using the new way, which is not working with our version.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c292d144

Confluence: combine data from parallel child pipelines

We deploy Yocto image and SDK in different pipelines, which both have
their Confluence jobs with the same Confluence target. Previously these
pipelines have been independent, so that running the Confluence job in
one of them would overwrite the Confluence page if it has been run in
the other pipeline before. Hence we could either have the image files or
the SDK files in the Confluence page.
Combine these now by checking for other parallel child pipelines with
the same Confluence configuration, so that running the Confluence jobs
in the Yocto pipeline also includes the information from the SDK build
and vice versa.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@53106170

Fix ci-test SDK version

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@d6d4ab61

Fix ci-test SDK download

Since the implementation of multiple child pipelines we cannot use the
previous artifacts download links anymore specifying tag and job name,
because the jobs for image build and SDK build are equal. Use direct
download links instead via job number.

BCS 746-001348

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@bc85e805

Build documentation in Yocto

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@0a3b1406

Confluence: get only those build jobs with a corresponding successful deploy job

We cannot handle build jobs and deploy jobs similarly, because all build
jobs are successful usually, while not all deploy jobs necessarily have
run. Get build.env only from those build job which have a corresponding
successful deploy job, otherwise MACHINE and SUPPORTED_HARDWARE fields
always contain the full list of built platforms, even if they might have
not been deployed.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@97228cdb

Move MACHINE variable from deploy.env to build.env

The Confluence stage is the only stage that needs the MACHINE variable.
Since the collect_release_information script already loads the build.env
from the build jobs, there is no need to store this variable in
deploy.env.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@ba156b0f

Confluence: check if variables are defined

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@cae6e282

Confluence: improve variable passing to template

Use a general mechanism of storing all job variables for each build job
separately, so that we have all documentation files in the
FILES_documentation variable. This makes the dedicated HTML_FILES
variable obsolete.
The merged variables are still kept, though, so that we have all
machines in the MACHINE variable to loop over.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@41f8a49f

Confluence: add error handling if artifact not found

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@1a519057

Make documentation files configurable

This disables the documentation jobs for SDK and FNGSystem.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@303e24eb

Build documentation in dedicated job

Previously the documentation files were rendered as part of the package
jobs. Each package job converted the same set of static markdown files
to HTML files, which was redundant.

Add dedicated jobs to build, package and deploy the documentation files.

Modify convert_md2html.py to support file globs as arguments.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@838da585

Refactoring: move Alphaplan stage code to the end

This reflects the stage order in the code.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@ff31d083

Refactoring: use multiple MACHINE loops for better structure

This is a preparation for adding dedicated documentation jobs. In order
to have these grouped by stage along with their corresponding machine
jobs, we have to get rid of the giant outer loop and add loops for each
stage instead.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@69973c95

Deploy: save deployed files in dotenv variable instead of dedicated file

Previously the deployed files were stored in a dedicated text file
called files.txt. Move this information to a dotenv variable called
FILES, so that we don't need special handling for it in the Confluence
stage.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@45d04033

Remove disabling sourcery low-code-quality in package_release

This check is not failing anymore since the latest refactorings.

Mikhail Vanyulin authored 1 year ago and Jonas Höppner committed 1 year ago

This is a fix for issue with id 746-001125: Tanaro: Bluetooth does not work

This is a cherry-pick of the following commit:
commit 72354854
Author: Pavel Skripkin <paskripkin@gmail.com>
Date:   Sun Mar 13 20:49:36 2022 +0300

    Bluetooth: hci_uart: add missing NULL check in h5_enqueue

    [ Upstream commit 32cb08e9 ]

    Syzbot hit general protection fault in __pm_runtime_resume(). The problem
    was in missing NULL check.

    hu->serdev can be NULL and we should not blindly pass &serdev->dev
    somewhere, since it will cause GPF.

Reported-by:  <syzbot+b9bd12fbed3485a3e51f@syzkaller.appspotmail.com>
    Fixes: d9dd833c ("Bluetooth: hci_h5: Add runtime suspend")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Signed-off-by: Mikhail Vanyulin <mikhail.vanyulin@rtsoft.de>

The imx8mp.dtsi file was copied from a 5.10 kernel version. Adapt file to
5.15 version. This fixes some USB-Hub initiliziation errors on the
LEVY D18 SOM.

BCS 746-001554

RTS and CTS are not muxed to the SMARC connector, so remove the
"fsl,uart-has-rtscts" protperty.

746-001377

BCS 746-001381

Add aliases for serial interfaces and rtcs.
Disable flexspi node for now, because FNG-System stucks during
boot when it is enabled.

BCS 746-001343

* b79.dtsi: Carrier board
* imx8mp-d18.dtsi: LEVY d18 SoM
* seco-imx8mp-d18.dts: d18 standalone
* seco-imx8mp-d18-b79.dts: d18 + b79

BCS 746-001345

The debounce period of 100 ms makes the touch input to slow.
Reduce the time to 50 ms.

Remove the pressure measurement according to the old driver.

The chip revision is determined from the AC97_RESET register value.

The STM32 ECTRL MCU manages additional board functions (e.g. power
button). Support for ECTRL was disabled in the D18 DTs because the
driver wasn't ported yet. The driver is now available, hence we can
re-enable supprot for the ectrl_stm32.

This reverts commit 1507a8a1.

Add the default polarity to the tanaro.dtsi and add one override to the
display, where the default polarity does not work.

The sel6/8 gpio is needed to toggle between 18bpp and 24bpp. This allow
to specify the gpio in the devicetree.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@cf0336d6

Define manifest file to build from

Not all displays worked reliable with 8 MHz. Reduced the clock to 7 MHz
which seems to work better.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a7503809

Confluence: add supported hardware information

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@0ef32ce7

Update simulated build to kirkstone-14.0

Remove temporary workarounds that were necessary due to changes after
the previously used release kirkstone-7.0.

Dietmar Muscholik authored 1 year ago and Jonas Höppner committed 1 year ago

Added additional compatible entry to enable support for eDP displays.