Remove reference to qcs6490 as E81 has both qcs6490 and qcs5430

Dietmar Muscholik authored 2 months ago and Oleksii Kutuzov committed 2 months ago

usb_1 is a little bit weird, copied from qcom-device-trees

We have 5 UARTs in E81 design,
accordingly increasing the number of possible uarts.

For three options:
- QCS6490
- QCS5430 FP1
- QCS5430 FP2

Dietmar Muscholik authored 3 months ago and Oleksii Kutuzov committed 2 months ago

The driver has been imported from branch seco_lf-6.6.23-2.0.0_e39-dev

An exact copy of the qcom_defconfig

Merge "QCLINUX: arm64: defconfig: Enable GPUCC SA8775P driver as static module" into kernel.qclinux.1.0.r1-rel

* changes:
  BACKPORT: can: mcp251xfd: mcp251xfd_ring_init(): check TX-coalescing configuration
  BACKPORT: can: mcp251xfd: properly indent labels

Merge "BACKPORT: can: mcp251xfd: move mcp251xfd_timestamp_start()/stop() into mcp251xfd_chip_start/stop()" into kernel.qclinux.1.0.r1-rel

Add support to enable the GPUCC SA8775P driver as static module.

Change-Id: Id7237a7f1f6769db821ddb59f08d96fad754d579
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>

TX-coalescing configuration

When changing the interface from CAN-CC to CAN-FD mode the old
coalescing parameters are re-used. This might cause problem, as the
configured parameters are too big for CAN-FD mode.

During testing an invalid TX coalescing configuration has been seen.
The problem should be been fixed in the previous patch, but add a
safeguard here to ensure that the number of TEF coalescing buffers (if
configured) is exactly the half of all TEF buffers.

Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-2-72086f0ca5ee@pengutronix.de


Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
(cherry picked from commit ac2b81eb8b2d104033560daea886ee84531e3d0a)
Signed-off-by: Anup <quic_anupkulk@quicinc.com>

To fix the coding style, remove the whitespace in front of labels.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
(cherry picked from commit 51b2a721612236335ddec4f3fb5f59e72a204f3a)
Signed-off-by: Anup <quic_anupkulk@quicinc.com>

into mcp251xfd_chip_start/stop()

The mcp251xfd wakes up from Low Power or Sleep Mode when SPI activity
is detected. To avoid this, make sure that the timestamp worker is
stopped before shutting down the chip.

Split the starting of the timestamp worker out of
mcp251xfd_timestamp_init() into the separate function
mcp251xfd_timestamp_start().

Call mcp251xfd_timestamp_init() before mcp251xfd_chip_start(), move
mcp251xfd_timestamp_start() to mcp251xfd_chip_start(). In this way,
mcp251xfd_timestamp_stop() can be called unconditionally by
mcp251xfd_chip_stop().

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
(cherry picked from commit a7801540f325d104de5065850a003f1d9bdc6ad3)
Signed-off-by: Anup <quic_anupkulk@quicinc.com>

This reverts commit 8eb2a6b0.
This reverts commit 665c84d5f7738cf0f700e8447153942dfcae644a.
This reverts commit 6a73cc68.

Change-Id: Iab6f2de32ac227aae6bbc93ac71affce01782f79
Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>

The "capacity-dmips-mhz" and "dynamic-power-coefficient" are
used to build Energy Model which in turn is used by EAS to take
placement decisions.

Change-Id: Ic95b0766b1e14485de09dc6362de24ed4072de30
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>

This change enables camera sensor for rb3gen2 addon kits.

Change-Id: I4402562f46ae4ef81f418d5c4a26df731da1d29a
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>

Merge "PENDING: ARM: dts: qcom: Update thermal zone names for qcs8300" into kernel.qclinux.1.0.r1-rel

* changes:
  PENDING: wifi: ath11k: add support for MU EDCA
  PENDING: USB: Adapt USB5807 driver for IPC hardware design
  FROMLIST: usb: misc: usb5807: Add driver
  BACKPORT: FROMLIST: arm64: dts: qcom: qcs9100: Update memory map  for QCS9100 Ride and QCS9100 Ride Rev3
  PENDING: hwmon: Add I2C detection and initialization for EMC2303

Merge "PENDING: arm64: dts: qcom: update power-domain for display-controller" into kernel.qclinux.1.0.r1-rel

Merge "QCLINUX: clk: qcom: videocc-sa8775: disable HW CTRL for video GDSC" into kernel.qclinux.1.0.r1-rel

* changes:
  QCLINUX: ASoC: qcm6490: Add support for QCS9075 RB8
  QCLINUX: arm64: dts: qcom: add audio support for qcs9075-rb8
  PENDING: arm64: dts: qcom: qcs9075: Add displayport device node
  QCLINUX: arm64: dts: qcom: qcs9075: Add UFS support for QCS9075 RB8

Merge "QCLINUX: arm64: dts: qcom: Enable usb controller on QCS9075 RB8" into kernel.qclinux.1.0.r1-rel

Commit 87ef5868 ("QCLINUX: drm/msm: Avoid probing gpu device")
only avoided adding gpu component. But gpu device probe can still
happen. Remove compatible strings qcom,kgsl-3d0 and qcom,adreno to
avoid probing gpu device.

Change-Id: Id6d255cf2b62e20b46a0d165320bdac10d39e004
Signed-off-by: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>

Modify the function and group binding for cci_i2c gpios.

Change-Id: Ic8efbd3d4d212c7f6d3c3b4839c6702570000d47
Signed-off-by: Stark Lin <quic_starlin@quicinc.com>

As per the thermal framework, the name of a thermal
zone should be under 20 characters. Shorten the name of
the thermal zones accordingly.

Change-Id: I55208f52f84cf458e4bd39913c2495a7d6cf5be0
Signed-off-by: Rakesh Kota <quic_kotarake@quicinc.com>

The current code does not have the MU EDCA feature, so it cannot support
the use of EDCA by STA in specific UL MU HE TB PPDU transmissions. Refer
to IEEE Std 802.11ax "9.4.2.251 MU EDCA Parameter Set element", "26.2.7
EDCA operation using MU EDCA parameters".

Add ath11k_mac_op_conf_tx_mu_edca() to construct the MU EDCA parameters
received from mac80211 into WMI WMM parameters，and send to the firmware
according to the different WMM type flags.

Tested-on: WCN6855 hw2.1 PCI
WLAN.HSP.1.1-04523-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1.

Change-Id: I795b017ef2d278e0d84b8ccd48762c870bb76c53
Signed-off-by: Yu Zhang(Yuriy) <quic_yuzha@quicinc.com>

Updated reset GPIO handling logic:
   - The RESET pin for USB5807 is directly controlled
     by hardware in the IPC design, and no software
     intervention is required.
   - Adjusted the code to ensure the driver operates
     correctly even when the reset GPIO is not configured
     in the software.

Change-Id: I6063f6989275600dbd0735100f8f1809cb4aa66c
Signed-off-by: Zhengchun Li <quic_zhengchu@quicinc.com>

The USB5807 is a 7-port USB 3.1 hub that can be configured by I2C.
This drivers resets the chip, optionally allows D+/D- lines to be
swapped in the devicetree config, and then sends an ATTACH command to
put the device in operational mode.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://patchwork.kernel.org/project/linux-usb/patch/20230509074621.29774-2-mike.looijmans@topic.nl/

.
Patch-mainline: linux-usb @ 05/09/23, 09:46.

[quic_zhengchu@quicinc.com: fix build issue, backport and adapt probe]
Change-Id: I7e57726238e3600b2d9e605326a78a8ed56ddeff
Signed-off-by: Zhengchun Li <quic_zhengchu@quicinc.com>