Integrate meta-seconorth-machine/kirkstone-pull-changes-from-dunfell

Commit: seco-ne/yocto/layers/meta-seconorth-machine@819fdb21

linux-imx: Adapt comment to to new override syntax

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@917cd74d

linux: defconfig: imx6ull: Add GPIO and PWM beeper as module

Add support for GPIO and PWM beepers. This enables the on-board beeper on the SECO Northern Europe NALLLINO platform.

BCS 746-000992

(cherry picked from commit ad7371e069ae0cd3c706fe635c272cfad29d8984)

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@423c00c2

mxt-touch: Pull support for atmel mxt touch from dunfell branch

• imx6:mxt-touch: Add kernel support for atmel mxt touch BCS 746-000886 (cherry picked from commit 82cbcf67a86c10ea3719637ae7b4e87fe58d0944)

• maxTouch:udev: Add udev rule to skip maxTouch fwr loading fallback

  The current version of the atmel_mxt_ts driver tries to load a controller configuration on each driver probe. However, if no config is provided or can't be provided because the driver is built-in, the driver probing process is delayed by 60 seconds because of a sysfs firmware load fallback. Added a udev rule that automatically cancels the sysfs firmware fallback.

  BCS 746-000892 (cherry picked from commit 55a34692b3cff31cb0f9ca3a400af843fa74f0b8)

• atmel-mxt: convert recipe to new syntax

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@6fc965a0

bootscript:dt: Added devicetree description file for i.MX8

Added an description file with the default devicetree for i.MX8 devices. The file is parsed/used by the post-install scripts to generate the boot configuration.

BCS 746-000877

(cherry picked from commit 283c6dfbad04132827135106bbc207393337500d)

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@cf9b0316

bootscripts: Clean-up and reformat

Changed the copyright and URL in the bootscript recipes. Also did a clean-up/reformat of the recipes.

(cherry picked from commit ba9e87ec884254967466f4a4dc1d9dd93063c33b)

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@38bb5a81

machine:tanaro: Added RTC overlays

In the future, the TANARO will be produced with two possible RTC variants. Both variants are present in the main devicetree but are disabled by default. During the installation, one of the RTCs will be activated via one of the two devicetree overlays.

BCS 746-000877

(cherry picked from commit df176aaef0f5eb459ea995bafb19a79a895b6a97)

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@e0c864d8

machine: Clean-up of i.MX8MM machine

Also small changes to the Kernel include file.

(cherry picked from commit 49cec4414dda982596e32c16a9ee0cba908856cc)

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@5517bf25

SIS: Fix touch-up issue

Sometimes we get no touchup signal in Qt. This was seen with the QML drag-and-drop example.

Looking at the output of evtest of the sis input device, you see different behavior for a working and a missing touch-up.

Failed:

...
Event: time 1587646331.383580, type 3 (EV_ABS), code 0 (ABS_X), value 2365
Event: time 1587646331.383580, type 3 (EV_ABS), code 1 (ABS_Y), value 2894
Event: time 1587646331.383580, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 2365
Event: time 1587646331.383580, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 2894
Event: time 1587646331.383580, -------------- SYN_REPORT ------------
Event: time 1587646331.402073, type 3 (EV_ABS), code 0 (ABS_X), value 2367
Event: time 1587646331.402073, type 3 (EV_ABS), code 1 (ABS_Y), value 2887
Event: time 1587646331.402073, type 3 (EV_ABS), code 24 (ABS_PRESSURE), value 0
Event: time 1587646331.402073, type 3 (EV_ABS), code 58 (ABS_MT_PRESSURE), value 0
Event: time 1587646331.402073, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 2367
Event: time 1587646331.402073, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 2887
Event: time 1587646331.402073, -------------- SYN_REPORT ------------

Good

Event: time 1587646407.907930, -------------- SYN_REPORT ------------
Event: time 1587646407.922769, type 3 (EV_ABS), code 0 (ABS_X), value 790
Event: time 1587646407.922769, type 3 (EV_ABS), code 1 (ABS_Y), value 1747
Event: time 1587646407.922769, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 790
Event: time 1587646407.922769, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 1747
Event: time 1587646407.922769, -------------- SYN_REPORT ------------
Event: time 1587646407.945577, type 3 (EV_ABS), code 0 (ABS_X), value 840
Event: time 1587646407.945577, type 3 (EV_ABS), code 1 (ABS_Y), value 1918
Event: time 1587646407.945577, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 840
Event: time 1587646407.945577, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 1918
Event: time 1587646407.945577, -------------- SYN_REPORT ------------
Event: time 1587646407.968810, type 3 (EV_ABS), code 24 (ABS_PRESSURE), value 0
Event: time 1587646407.968810, type 3 (EV_ABS), code 58 (ABS_MT_PRESSURE), value 0
Event: time 1587646407.968810, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value -1
Event: time 1587646407.968810, -------------- SYN_REPORT ------------

It seems that the @ABS_MT_TRACKING_ID value -1@ is missing somehow.

This might be the case when the driver sends a valid coodinate but also states that the pressure is 0.

Fix this by sending a touch-up (all ABS_PRESSUE, ABS_MT_PRESSURE, and ABS_BUTTON 0 and ABS_MT_TRACKING_ID -1) when pressure is 0.

BCS 746-000871

(cherry picked from commit 0326de4b2c2a5ca6e52b84e0bfe12f88123aeedd)

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@034d5b83

mxt-touch: Add kernel support for atmel mxt touch

BCS 746-000857

(cherry picked from commit 4bf6746db6f04702f190840b24f152c703bc162e)

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@848013cb

linux-guf:imx6ull: Add MQS and simple-amplifier

Add the iMX Medium Quality Sound driver and the simple amplifier driver to the defconfig. Together with the latest kernel changes for NALLINO this adds sound support for the NALLINO board.

BCS 746-000796

(cherry picked from commit 69fb720b1d7920bb0ad7235d08b9be7162117ad5)

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@420c6a1b

LICENSE: Add Apache 2.0 license file

According to our company licensing policy for software the Yocto layers should be licensed under the Apache 2.0 license. Adapt the LICENSE-2.0.txt file from https://www.apache.org/licenses/LICENSE-2.0.txt as described in the APPENDIX.

Add the license as LICENSE.txt file to the layer repository.

BCS 746-000657

(cherry picked from commit 66d98abb1b077a421da78edc6ec35643ac00b852)