--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@df176aae

machine:tanaro: Added RTC overlays

In the future, the TANARO will be produced with two possible
RTC variants. Both variants are present in the main devicetree
but are disabled by default. During the installation, one of
the RTCs will be activated via one of the two devicetree overlays.

BCS 746-000877

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@49cec441

machine: Clean-up of i.MX8MM machine

Also small changes to the Kernel include file.

--

Commit: seco-ne/kernel/linux-imx-kuk@9b1710b2

tanaro:rtcs: Added overlays for the TANARO RTCs

The TANARO will be produced with one of two RTC variants.
One of them will be activated during the installation by
applying one of the overlays.

BCS 746-000877

BCS 746-000917

Change-Id: Ie2cc0b608c1823ce34b65308ceedfa2885f2674b

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@38c8f73c

FNGSystem: Install kernel-modules to fix missing sound support

We did remove the kernel modules for FNGSystem to reduce the image
size. Compared to FNGSystem 27 the kernelmodules are adding about
2 MB, which seems to be OK for me.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@6508e800

CI: Add hardcoded artifact's path generation also for fng system

--

Commit: seco-ne/tools/gf-productiontests@5d76a070

Print test result to console when the test is done

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@f9407345

shared-conf: Allow on/off for bool values not only true/false

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@920b5c91

fnginstall-postinstallation: Fix boot partition detection for fngsystem

The scripts failed if run in an installed fngsystem. This is needed in
FT2, when new xml files are installed after the FNGSystem installation.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@b3c8ca1b

alsa:imx6: Switch to sgtl5000 as default audio card

Replaced absolute card number by the ID of the sgtl5000 audio card.
Added additional alsa configuration files for imx6ull as it does
not have the sgtl5000 codec.

BCS 746-000548

--

Commit: seco-ne/tools/gf-emc-test-suite@113135af

rs485echo: Fix RS485 transmission delays

Before, the delay_rts_before_send delay_rts_after_send fields were not
explicitly initialized. This led to a erroneous transmission behaviour.
Now the RS485 port settings are read before the half duplex
configuration is done. This ensures that the delays are set to 0 or to
a predefined value (device tree).

BCS 746-000908

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c503a6d4

CI: pipeline yocto: Change scope of CI_PARAM_IMAGE, ... to fix fngsystem build

The variables CI_PARAM_IMAGE, CI_PARAM_DISTRO, CI_MACHINE have been
defined outside the job in the '.gitlab-ci.yml' file. This has a lower
precedence then variables defined inside the job, but it seems that
these variables are used in the scope of 'Trigger variables' when
available in the trigger job. These override the value set in the
template. As main results this made FNGSystem jobs build the normal
yocto.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@ea3aa816

CI: Readd allow_failure:true to fix not finished pipelines

According to the docs a manual job always has allow_failure set to
true, but we see a lot of jobs staying in an unfinished state since
the removal of the allow_failure: true keyword for the sdk and test
jobs. This should fix the broken behaviour.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@dc0503b6

CI: Hardcode the artifacts path in the generated job description

Some gitlab update(?) seem to have changed the behaviour in
variable passing. In the scripts the variables are available
but in the artifacts path does not resolve them any more.
May be it has something to do with the introduction of the
trigger:forward keyword.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f39e65ab

Manifest: really include yamllint in the full pipeline

Previous commit did not have the effect due to wrong extend order.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@0dd147c8

SDK: Remove package step from build sdk, add sdk to artifacts, create deploy_sdk

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@ecab2962

Manifest: include yamllint in full pipeline

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a4071423

Manifest pipeline: run full build pipeline when triggered via web UI

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8862b213

Manifest refactoring: move job rules into classes

This way they can be reused instead of redefining them in each job.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@d604b330

Fix wrong remote name in ci-test pipeline

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@e810c2ac

Fix wrong manifest project ID for ci-test pipeline

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@0326de4b

SIS: Fix touch-up issue

Sometimes we get no touchup signal in Qt.
This was seen with the QML drag-and-drop example.

Looking at the output of evtest of the sis input device, you see
different behavior for a working and a missing touch-up.

Failed:
<pre>
...
Event: time 1587646331.383580, type 3 (EV_ABS), code 0 (ABS_X), value 2365
Event: time 1587646331.383580, type 3 (EV_ABS), code 1 (ABS_Y), value 2894
Event: time 1587646331.383580, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 2365
Event: time 1587646331.383580, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 2894
Event: time 1587646331.383580, -------------- SYN_REPORT ------------
Event: time 1587646331.402073, type 3 (EV_ABS), code 0 (ABS_X), value 2367
Event: time 1587646331.402073, type 3 (EV_ABS), code 1 (ABS_Y), value 2887
Event: time 1587646331.402073, type 3 (EV_ABS), code 24 (ABS_PRESSURE), value 0
Event: time 1587646331.402073, type 3 (EV_ABS), code 58 (ABS_MT_PRESSURE), value 0
Event: time 1587646331.402073, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 2367
Event: time 1587646331.402073, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 2887
Event: time 1587646331.402073, -------------- SYN_REPORT ------------
</pre>

Good
<pre>
Event: time 1587646407.907930, -------------- SYN_REPORT ------------
Event: time 1587646407.922769, type 3 (EV_ABS), code 0 (ABS_X), value 790
Event: time 1587646407.922769, type 3 (EV_ABS), code 1 (ABS_Y), value 1747
Event: time 1587646407.922769, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 790
Event: time 1587646407.922769, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 1747
Event: time 1587646407.922769, -------------- SYN_REPORT ------------
Event: time 1587646407.945577, type 3 (EV_ABS), code 0 (ABS_X), value 840
Event: time 1587646407.945577, type 3 (EV_ABS), code 1 (ABS_Y), value 1918
Event: time 1587646407.945577, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 840
Event: time 1587646407.945577, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 1918
Event: time 1587646407.945577, -------------- SYN_REPORT ------------
Event: time 1587646407.968810, type 3 (EV_ABS), code 24 (ABS_PRESSURE), value 0
Event: time 1587646407.968810, type 3 (EV_ABS), code 58 (ABS_MT_PRESSURE), value 0
Event: time 1587646407.968810, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value -1
Event: time 1587646407.968810, -------------- SYN_REPORT ------------
</pre>

It seems that the @ABS_MT_TRACKING_ID value -1@ is missing somehow.

This might be the case when the driver sends a valid coodinate but also
states that the pressure is 0.

Fix this by sending a touch-up (all ABS_PRESSUE, ABS_MT_PRESSURE, and
ABS_BUTTON 0 and ABS_MT_TRACKING_ID -1) when pressure is 0.

BCS 746-000871

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@325cd3c2

multiscreen-compositor: Adapt receipe to adapted naming, add message client

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@9b8cf51c

Share manifest pipeline for ci-test and yocto

Combine all common yaml parts in manifest-pipeline.yml and add
manifest-pipeline-yocto.yml and manifest-pipeline-ci-test.yml
containing the different variable assignments for each environment.

This change implicitly introduces parent-child build job generation in
the ci-test pipeline, like it is done in the yocto pipeline already.
The ci-test build jobs have been moved to build-jobs-ci-test.jinja2
accordingly.

Furthermore rename GITLAB_CI_CURRENT_REV to GITLAB_CI_REVISION and
remove the run conditions from all generated build jobs, since these are
already present in the upstream trigger job.

The repos including these files have to be updated with the new file
and variable names.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c1b939fe

Use CI variables in build template directly

The job generation script implicitly passes the OS environment to the
template, so that the template has access to all GitLab CI variables.
Hence there is no need to explicitly pass any of them as command line
arguments.

This change makes the "generate-build-jobs" job more generic, so that
it can be shared with the ci-test pipeline in the future.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@775c09c1

Add gitlab_backup script to download all project exports of a gitlab group

--

Commit: seco-ne/tools/qt-multi-screen-compositor@bb90d170

Cleanup: Add common header for client and server, remove unused code

--

Commit: seco-ne/tools/qt-multi-screen-compositor@9c3b785e

Config: Move the read rotation function inside the config class

--

Commit: seco-ne/tools/qt-multi-screen-compositor@3bc95fd9

Add compositor-message tool, massiv renaming and cleanup

--

Commit: seco-ne/tools/qt-multi-screen-compositor@00617781

Add server class, implement command decoding

Add hide and show window
MoveWindowToScreen

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@98409477

multiscreen-compositor: Adapt receipe to adapted naming, add message client

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@7f68f307

Yocto manifest build: re-enable build:merge_request job

This job was accidentally disabled in 2e6c1b4, because it was included
in the generated child pipeline. This pipeline is not created on the
master, though, so the condition for the job was never met.

Move the job to the parent pipeline again, so that it gets executed on
the master like before.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@970c7fd7

Re-add yamllint stage to ci test manifest pipeline

Was accidentally removed in previous commit.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@c0871d1e

fng-install: Fix --partition-scheme change in FNGSystem install script

When switching from scheme 1 to 2, there was a bug leading to an
unformated partition.

Additionally I removed the partition message for FT2. This is only
used during the yocto installation and was in the wrong position
anyway.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@a4ecd599

fng-install: Move the partition-scheme parameter to the fngsystem install script

The implmentation was not really working when used in a yocto
installation, as it would have needed a relocation of FNGSystem.
Now the explicit change of the partition scheme is only be possible
together with the installation of FNGSystem.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@e811145d

fng-install: Fix installation issue when used with fresh FNGSystem 15.1

When FNGSystem 15.1 was just installed and only one partition was
setup on the device the installation failed.
This is fixed here.

Also: in A-B installation mode is the used target (A or B) reported
after the installation.

--

Commit: seco-ne/kernel/linux-guf@d494236f

logo: Set SECO logo as default boot logo

Added adjusted SECO logo and removed the gf logo.

BCS 746-000874

--

Commit: seco-ne/kernel/linux-guf@4458d6ee

logo: Added SECO and EDGEHOG logo

BCS 746-000693


(cherry picked from commit fa277d894d440a993ff24cb93f1a5c94b91fb102)

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@2b2bc220

Define yamllint job explicitly in each pipeline

The yamllint job was included in the pipeline implicitly via the
inclusion of common.yml. This is not very transparent. Make the common
definition a base job and extend it explicitly in each pipeline now.

Add infrastructure stage comment header into both yaml files.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@686323c6

Remove yaml redundancies in manifest-integration

Leave all common yaml parts in manifest-integration.yml and add
manifest-integration-yocto.yml and manifest-integration-ci-test.yml
containing the different variable assignments for each environment.

The repos including these files have to be updated with the new names.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@4c751096

Harmonize manifest-integration yaml files for yocto and ci-test

This is the first step for reducing code duplicates.

BCS 746-000807

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c877f9c9

retrigger: Allow to specify the manifest's remote identifier in a variable

Costum manifest may override this variable

--

Commit: seco-ne/kernel/linux-imx-kuk@38fa8741

logo: Set SECO logo as default boot logo

Added adjusted SECO logo and removed the gf logo.

BCS 746-000874

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@96288601

NFS: Add nfs-utils-client package to image

The nfs-statd systemd service is disabled by default.

BCS 746-000876

--

Commit: config@959df119

Integrate gitlab-ci/use-parent-child-build-jobs

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@2e6c1b4f

Build jobs: Use parent-child jobs to generate needed build jobs

* Move all build, deploy and test stubs to the manifest-build.yml
* Create a new job to generate and trigger the build jobs dynamically
* Add the base jinja2 file for the build jobs.
* Add initial docs for the manifest pipeline
* Remove unused files

--

Commit: config@8ddfc9f5

Integrate gitlab-ci/move-python-scripts-to-subfolder

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@1bc683d5

Move python scripts to subfolder

BCS 746-000808

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@d9660a80

build-jobs.jinja2: Specify master branch variable again

If the MASTER_BRANCH_MANIFEST variable is set in the manifest's
.gitlab-ci.yml file, it may not find its way to the generated job,
if it is not explicitly set during generation.
That is done with this patch.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@2e6c1b4f

Build jobs: Use parent-child jobs to generate needed build jobs

* Move all build, deploy and test stubs to the manifest-build.yml
* Create a new job to generate and trigger the build jobs dynamically
* Add the base jinja2 file for the build jobs.
* Add initial docs for the manifest pipeline
* Remove unused files

Due to the usage of CI files from gitlab-ci repo, these local files are
not used any more.

Change-Id: Ia9c2f5a8d2c928f9567c7ead0093b5d446c69dc1

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@1bc683d5

Move python scripts to subfolder

BCS 746-000808

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@5058c033

qt-multi-screen-compositor: Add kms.conf for imx8m

For imx8m it is necessary to specify drm device 0 to run the qt-compositor
with eglfs backend.

BCS 746-000787

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@ae1922ba

psplash: Added switches for clear-background, logo and progress border

This allows us to draw the progress bar directly on top of the kernel
splash logo. By default, psplash only displays the progress bar.

BCS 746-000786

* The master branch manifest needs to be specified here, as the kirkstone branch
includes the same files and needs to use kirkstone as master branch
manifest
* The project id needs to be specified here, as the 'manifest.yml' will
be included in multiple manifest repos with different ids.
* Putting the gitlab-ci-rev into a variable allows it to use it in
further ci steps. The 'deploy-gitlab-cy' step of the gitlab-ci repo
should update this value as well, as a plain substitution of the hash is
used.

Change-Id: I5d7996edee4d0b94d0365424b0db44449cefabd1

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@63904511

imx8mp:logo: Move logo rotation to project specific layer

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@91b1c14e

systemd: Remove networkd depending on gplv3 in DISTRO_FEATURE, configure MAC Address

Normally we would use network-manager, but for the gplv3 free variants
it is not available. In these cases we keep systemd-networkd as
network tools available.
Also adapt the call to gf-network-conf in the postinsts step during the
first boot to automatically determine the used network tooling.
This way the configuration for systemd-networkd is generated from the
xml setting as needed.

Until now the MACAdress was not configured if systemd-networkd was used.
Now the MACAddress is added to the newwork config file like it is done
when network-manager is used.

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@4bf6746d

mxt-touch: Add kernel support for atmel mxt touch

BCS 746-000857

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@510cc193

xwayland: Fixed timeout during start-up

The weston-start script for xwayland overrides the module loading of the
notify library. Without notify, Weston doesn't report a successful start
back so systemd. As a result, systemd stops Weston after hitting the
timeout period.

Without the module loading directive in the start script, xwayland needs
to be activated in the weston.ini.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@3c8f0d7f

distro: Rework of nogplv3 distro

The nogplv3 distro now includes the default guf-wayland distro
and only removes the gplv3 distro feature.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@0c01033f

packagegroup: Added optional xwayland to graphics group

If x11 and wayland are both activated in the DISTRO_FEATURES, we add
xwayland and its xserver implementation to the image.

--

Commit: seco-ne/yocto/layers/meta-seconorth-nogplv3@a81215cb

image: Fixed small image without GPLv3 software

The small packagegroup was missing from the build.
Without the small packagegroup, the image can't be build because were
missing core components like busybox.
Also the multimedia packagegroup was re-added.