--

Commit: seco-ne/kernel/linux-imx-kuk@f8a21b5b

gitlab-ci: Update master branch to 5.15.32

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@1c8d1ebb

imx:vpu: Re-added imx-vpuwrap

The imx-vpuwrap package was removed because the VPU support was broken
in Dunfell. Re-added the package to enable the VPU support in
Kirkstone.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@af4918cb

fngsystem:self-update: Added new devicetree handling

The handling of custom devicetrees and devicetree overlays has changed.
Applied the changes made to the fng-install script to the fngsystem-
self-update script as well.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@c0ac5c9b

fng-install: Fixed error that clears the dt in the config

If no custom devicetree is set, the devicetree file isn't present.
In this case, the script would clear the default devicetree from
the boot config. Added a check to the script, that prevents the clearing
of the devicetree parameter.

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@222ea99d

kernel: Update kernel for i.MX8M to 5.15.32

The 5.15.32 kernel is the first official kernel from NXP for Kirkstone.
Forked the kernel from NXP and applied our changes on top of it.

--

Commit: seco-ne/tools/gf-emc-test-suite@165940b8

Update branch and recipe name for kirkstone integration

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@74b33419

fng-install: Fixed post-install for fngsystem

The post-install wasn't handling the alternative boot configuration.
Also the combine step for kernel + devicetree was failing on i.MX8
devices because of space limitations.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@9b022e2b

fng-install: Updated post-install scripts

The environmental variable based passing of devicetrees and overlays has
been replaced entirely by a file-based mechanism.
The documentation, comments, and format of the post-install scripts
have been extended and reworked.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@92399b95

fng-install: Clarify interface between fng-install and postinstall steps

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@52a725fd

kernel:logo: Fixed defconfig to re-enable logo selection

The logo selection is based on disabling the fngsystem or seco
logo in the defconfig.
Fixed the defconfig to re-enable the selection mechanism.

--

Commit: seco-ne/yocto/layers/meta-seconorth-nogplv3@9ba8e4a8

class:image: Fixed wrong pg name in small image class

The packagegroup for the seco packages was still included via the old
guf name.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@2a695edb

packagegroups: Add net-tools and vim to the packagegroups


(cherry picked from commit 9f28557a35121335a18163c9e262c0a412b3b560)

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@620dc4db

fng-install: Fixed custom devicetree for i.MX8

A custom devicetree can be set via the -d parameter on the fng-install
script. Since the re-work of the post-install scripts, the parameter
wasn't applied correctly (when no overlays were set).
Fixed the setting of the devicetree parameter in the boot.cfg, to
re-enable to correct loading of custom devicetrees.

--

Commit: seco-ne/yocto/layers/meta-seconorth-nogplv3@eb8101d1

demo: Renamed demo to seco-show-demo

The demo was renamed in the distro layer. Applied the change here
as well.

--

Commit: seco-ne/yocto/layers/meta-seconorth-nogplv3@3e4288f7

image: Renamed image classes and images to seconorth

We now use seconorth as prefix for all our images.
Renamed the images without GPLv3 to reflect the change.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@615ac6f0

seco-show-demo: Port to the latest seco-show-demo

Use the latest seco-show-demo:
* Rename the guf-show-demo to seco-show-demo
* Pull from ew2022 branch
* Also some slides needed refinement.

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@1dff280e

kernel:driver: Added audio codec WM8962 driver to i.MX8

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@ce5c75a5

kernel:logo: Fixed boot logo selection

The names of the fngsystem and guf (now seco) logo have changed.

--

Commit: seco-ne/kernel/linux-imx-kuk@16633747

logo: Removed duplicate of seco boot logo

A duplicate of the seco logo was present in the logos dir.

--

Commit: seco-ne/kernel/linux-imx-kuk@be1249c0

fngsystem: Added image file for fngsystem

The image file for the fngsystem boot logo was missing.
Re-added the file to fix the kernel build.

--

Commit: seco-ne/kernel/linux-imx-kuk@73188255

logo: Enable SECO and FnG logo by default

Both logos need to be enabled by default. The logo that is added to the
kernel is picked through the defconfig and the override in the kernel
include file.

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@51c5b091

kernel:defconfig: Disabled audit

We don't use the audit messages and they spam the log constantly.
Disabled them in the defconfig.

--

Commit: seco-ne/kernel/linux-imx-kuk@371eefb2

logo: Added fngsystem boot logo

Cherry-pick from af765e15

--

Commit: seco-ne/kernel/linux-imx-kuk@4d6d0c3d

dual-espresso:RTC:dts: Enable wakealarm feature

Added wakeupsource and interrupt for RTC rv3028.
Now wakealarm the is available at: /sys/class/rtc/rtc0/wakealarm

BCS 746-000767

(cherry picked from commit a72cb6a22c40f6811c2c56c53e38ac14ec9c0869)

--

Commit: seco-ne/kernel/linux-imx-kuk@2a99f2e2

mx8mp: clk-composite-8m: Add workarround for media-disp clk with less allowed deviders

Measured the pixelclock on the lvds interface the frequencies generated
by media_dips2_pix clock do not match the calculated values by the
driver. The driver selects a devider between 1 and 64 ( according to the
    ref manual) but the measured frequencies only end up with
frequencies matching a devider from 1,7,14,21,35.
This patch changes the selected of deviders to that list, so the
frequency is rounded to a actually working frequency.

BCS 746-000495

(cherry picked from commit 70382beaa7b0da42d44799d90ce437a15412d183)

--

Commit: seco-ne/kernel/linux-imx-kuk@754b009a

imx8mp-ldb: remove hardcoded pixel clock overwrite

The imx8mp ldb driver had an hardcoded overwrite for the pixelclock as
the video_pll is not able to generate all needed frequencies.
But the hardcoded value only fits to one mode, probably used on the
EVK.
Removing this override leads to a pixelclock that may be generated with
a devider from the PLL, which ends up with a frquency much closer to what
is expected.

Also it is not the ldb clock but the lcdif clock used for this, so this
seems to be the wrong place for modifying the clock anyway.

BCS 746-000502

(cherry picked from commit 86df943de1f70cb4fdce4b08123221b982e0d0aa)

--

Commit: seco-ne/kernel/linux-imx-kuk@f1dc6cb0

dts:dual-espresso:trizeps8plus: Replace pwm-legacy-backlight driver

The pwm-legacy-backlight driver is removed in the 5.15 kernel. Use
pwm-backlight instead.

BCS 746-001009

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@4250fa7f

fnginstall: Added comment to selection of boot partition

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@fd9cc721

os-release: Updated URL

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@f0471f13

partitions: Increased fngsystem partition size

The Kirkstone-based Flash-N-Go System (plus the kernel) is slightly bigger
than the current 64MB partition size. Increased the size to 128 MB for now.
In the future, compressing the kernel would be a better solution.

Info: Self-extracting kernels are not yet supported on ARM64. We, therefore,
use an uncompressed kernel at the moment.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@40d27565

fnginstall: Fixed wrong machine name

The selection of the partition scheme was still dependent on the old
machine names and was therefore broken (the selection was falling back
to the i.MX6 scheme).

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@635145b2

conf:imx8mp: Add new dual-espresso devicetree to build artifacts

BCS 746-000835

--

Commit: seco-ne/kernel/linux-imx-kuk@89e49904

dts: Enabled hmdiphy due to stall

For some reason, without the hdmiphy the device stalls during the boot
process. Further investigation into why this happens is required.

BCS 746-001009

--

Commit: seco-ne/kernel/linux-imx-kuk@3cd3d98c

dts: Added new devicetree for Trizeps 8 Plus v1r3

The ethernet phy and audio codec have changed in the new revision of the
Trizeps 8 Plus. Removed the unwanted properties from the ethphy0 node
and set the address to 0.
The audio codec hasn't been added yet.

Cherry-pick from a40f7a72

BCS 746-000835

--

Commit: seco-ne/kernel/linux-imx-kuk@eae93f69

trizeps8plus:pmic: Remove hard IRQ dep from pca9450 driver

Changed the driver to probe without interrupt gpio, as the irq is not
routed on the trizeps8plus board. It seems to be used for debug output
on pmic errors only, so it should work without.

Cherry-pick from 7739e8c9


(cherry picked from commit 3ec08c4ddbaf32dca271937425350b189eb88f0a)

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@191e249f

uuu: Fixed artefact names

The generic artefact names (like Image), had to be removed with
Kirkstone. The artefacts now have extended names, that must be
used during the generation of the batch/shell scripts for calling
UUU.

For more info see commit 0272dbc3.

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@deba8d32

machine: Renamed include for mx8 to seco-mx8

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@f71c8d14

maxtouch:imx6: Integrate touch driver as module

Since we may need a different driver for touch tuning purposes, it is
advantageous to integrate  the driver as a module.

BCS 746-000889

(cherry picked from commit f88db235eb55e90c874aea516250705bc02be3d5)

--

Commit: config@39ac7a10

Rename machines from imx...gif to seco-mx... pattern.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@864f2426

demo: Remove guf-show-demo2

Removed guf-show-demo2 package since we do not use it anymore. If we need
an additional demo instance again, we should use an additional systemd unit
file instead of adding a complete package.

BCS 746-000810

(cherry picked from commit 4606414f)

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@2f66e92f

wayland:kiosk: Fixed weston kiosk-shell

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@cad2ccf1

qt:compositor: Fixed format error in kms config for i.MX8

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@43d358b7

qt:compositor: Run service as qt user

It is best practice to don't run services as root. The qt-compositor
service now runs under the qt username.
The commit also contains a draft of the systemd socket-based activation
mechanism. Unfortunately, the qt-compositor daemon doesn't handle the transfer
of the socket from the socket unit to the service unit properly.
Until the daemon is fixed, the service still needs to be started manually.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@9c1ae36c

base-files:profiles: Moved and updated profiles for Qt/Wayland

Moved the profiles with the environment initialization into a new
sub-folder and activated them by linking to the sub-directory.
The reason for this is, that weston and the qt-compositor need
different environments and we want an easy way of exchanging them.
The wayland related parts have been moved from the qtenv to weston
and qt-compositor.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@3abb7323

qt:compositor: Fixed wrong service file name in do_install

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@498b4492

qt:compositor: Disabled hardware-cursor for mx8m

The hardware-cursor is rendered outside of Qt and doesn't properly
display when the screen is rotated via the qt-compositor.
The qt-compositor can display the cursor itself, which might be the
preferred way.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@03320c1d

qt:compositor: Run the qt-compositor as qt user

Changed the qt-multi-screen-compositor to run under the qt username.
Fixed the file names of the systemd service units and
added the creation of the qt user to the recipe.

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@5fc7107b

qt:compositor: Renamed service files

The qt-multi-screen-compositor will run under the "qt" username
in the future. Renamed the systemd service files to reflect the
change.

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@baffaef0

seco-mx8mp: rename machine from imx8mpguf to seco-mx8mp

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@ef5e0f98

seco-mx8mm: rename machine from imx8mguf to seco-mx8mm

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@37408f71

seco-mx6ull: rename machine from imx6ullguf to seco-mx6ull

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@cd7456bc

seco-mx6: rename machine from imx6guf to seco-mx6

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@3d85f6fb

seco-mx8mp: rename machine from imx8mpguf to seco-mx8mp

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@b18500ef

seco-mx8mm: rename machine from imx8mguf to seco-mx8mm

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@9025caac

seco-mx6ull: rename machine from imx6ullguf to seco-mx6ull

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@82f1b322

seco-mx6: rename machine from imx6guf to seco-mx6

GitBot authored 2 years ago and Jonas Höppner committed 2 years ago

--

Commit: config@39ac7a10

Rename machines from imx...gif to seco-mx... pattern.

(cherry picked from commit 140b689c)

GitBot authored 2 years ago and Jonas Höppner committed 2 years ago

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@3d85f6fb

seco-mx8mp: rename machine from imx8mpguf to seco-mx8mp

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@b18500ef

seco-mx8mm: rename machine from imx8mguf to seco-mx8mm

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@9025caac

seco-mx6ull: rename machine from imx6ullguf to seco-mx6ull

--

Commit: seco-ne/yocto/layers/meta-seconorth-distro@82f1b322

seco-mx6: rename machine from imx6guf to seco-mx6
Change-Id: I6662f0d389f084c0cabf214d9f6b85ce7bbee835

GitBot authored 2 years ago and Jonas Höppner committed 2 years ago

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@14793971

seco-mx8mp: rename machine from imx8mpguf to seco-mx8mp

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@adf80e9e

seco-mx8mm: rename machine from imx8mguf to seco-mx8mm

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@075230f5

seco-mx6ull: rename machine from imx6ullguf to seco-mx6ull

--

Commit: seco-ne/yocto/layers/meta-seconorth-machine@490a265f

seco-mx6: rename machine from imx6guf to seco-mx6
Change-Id: Ie5c74e55cbc7202b159dbd31f0b191342bb18da0

Change-Id: I37057c18bb0a91e917a5d1264096183974299606