Dmitry Petrov authored 1 year ago and Jonas Höppner committed 1 year ago

This is a part of fix for issue [746-000797] Flash-N-Go System: Implement
"Disable serial console".
This allows to set console=ttynull in kernel cmdline.

Signed-off-by: Dmitry Petrov <dmitry.petrov@rtsoft.de>


(cherry picked from commit 6be55816)

The logo is dynamically replaced via an append to the do_compile in the
Kernel recipe. For this to work, the fngsystem logo has to be disabled
in the defconfig.

Squashfs is required for rauc bundles installation.

Signed-off-by: Mikhail Vanyulin <mikhail.vanyulin@rtsoft.de>

Required for sound support on NALLINO.

BCS 746-001388

iptables are already enabled for mx6 and mx8.
See commit e404727f

BCS 746-001388

BCS 746-001386

Note: The backlight class device is auto-removed because it is implicitly
selected by the framebuffer.

The defconfig contained some old entries. Re-exported the defconfig to
get a clean state.

A customer mentioned /dev/uinput to be missing which he uses to emulate
mouse input during testing. The enabled config option enables the
required driver for imx6 machines.

BCS 746-001266

PPP is required for the SANTVEND to establish a modem connection.

Dmitry Petrov authored 2 years ago and Jonas Höppner committed 2 years ago

Signed-off-by: Dmitry Petrov <dmitry.petrov@rtsoft.de>

Dmitry Petrov authored 2 years ago and Jonas Höppner committed 2 years ago

Signed-off-by: Dmitry Petrov <dmitry.petrov@rtsoft.de>

Dmitry Petrov authored 2 years ago and Jonas Höppner committed 2 years ago

Signed-off-by: Dmitry Petrov <dmitry.petrov@rtsoft.de>

Enable spidev drivers to support BLE modules on SANTVEND boards.

Depending on the revision of hardware, different drivers should be used:
- in case of v1.2 revision, it is equipped with ISP091201 BLE module
which is governed by special "spidevas" driver which implements its own
chip select handling.
- in case of v1.3 revision, it is equipped with Protues-III BLE module,
which is governed by standard "spidev" driver.

It was decided to build the "spidevas" driver as a kernel module.

Signed-off-by: Dmitry Petrov <dmitry.petrov@rtsoft.de>

Enable gpio-poweroff, two additional temperature sensors (lm73, lm9600)
and ADC128S052 converter.

Signed-off-by: Dmitry Petrov <dmitry.petrov@rtsoft.de>

Mikhail Vanyulin authored 2 years ago and Jonas Höppner committed 2 years ago

Enable a VEML6030 driver, which is compatible with VEML7700 sensor, in
the kernel config. This external sensor is connected I2C bus on SantVend
board.

Signed-off-by: Mikhail Vanyulin <mikhail.vanyulin@rtsoft.de>

Approach ip filter config to seco-mx8m. CONFIG_LIBCRC32C=m seems to
be no longer necessary as it was automatically removed by menuconfig.

BCS 746-001166

The kernel includes and recipes have been renamed to seconorth.
Also the defconfigs have been moved to fitting folders.