fngboot: Move install script to meta-seconorth-distro

The install scripts are all located within the distro layer.
Remove the install scripts in this layer and re-create them in the
distro layer.

BCS 746-001394

recipes-bsp/fng-boot/fng-install-fngboot.bb

-SUMMARY = "SECO Northern Europe FNG-Boot install script for Flash-N-Go System"
-HOMEPAGE = "https://www.seco.com"
-
-LICENSE = "Apache-2.0"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
-
-RDEPENDS:${PN} = " \
-    fngboot \
-"
-
-INSTALL_SCRIPT="fng-install-fngboot.sh"
-
-require recipes-bsp/fng-install/fng-install.inc
-SRC_URI = " \
-    file://${INSTALL_SCRIPT} \
-    "
-
-RPROVIDES:${PN} += " ${INSTALL_SCRIPT} "
-
-FILES:${PN} = "${sbindir}/${INSTALL_SCRIPT}"
-
-do_install() {
-    install -d ${D}${sbindir}
-    install -m 0755 ${S}/${INSTALL_SCRIPT} ${D}${sbindir}/
-}
-
-inherit deploy
-
-do_deploy() {
-    install -m 0755 ${B}/${INSTALL_SCRIPT} ${DEPLOYDIR}/${INSTALL_SCRIPT}
-}
-addtask do_deploy after do_install

recipes-bsp/fng-boot/fng-install-fngboot/fng-install-fngboot.sh

-#!/bin/sh
-# shellcheck disable=2153,2154,2034
-# Shellcheck does not see the assignment of variables in the called functions
-# and complains about using unassigned variables.
-#
-# FNG-Boot update script - (c) 2023 SECO Northern Europe GmbH
-#
-
-BOOTLOADER_PACKAGE=fngboot.tar.gz
-BOOTLOADER=fngboot.bin
-
-HELP="
-# FNG-Boot update script - (c) 2023 SECO Northern Europe GmbH
-#
-# This script is designed to run from the Flash-N-Go system. It overwrites
-# FNG-Boot with a new version.
-#
-# ATTENTION: This step is dangerous, because it might make the system
-# unbootable. Run this script only if you are absolutely sure that you
-# need a newer version of FNG-Boot.
-#
-# To run the script, either setup an TFTP or HTTP[S] server to allow access
-# to this script and the other needed files ( $BOOTLOADER_PACKAGE ).
-# Connect your device to the Ethernet, boot Flash-N-Go system and make
-# sure it can access your server (try with 'ping', configure IP address if
-# necessary).
-#
-# Then run the following commands (replace the IP address by your server's
-# IP address):
-#   export URL=192.168.1.100;curl tftp://$URL/fng-install-fngboot.sh | sh -s -- <args>
-#
-# Installation from local media ( thumbdrive, ...) is also possible.
-#   unset URL; sh fng-install-fngboot.sh <args>
-#
-# Options:
-#     -b=*|--BOOTLOADER=*          Specify alternative bootloader file, default is '$BOOTLOADER_PACKAGE'
-#
-"
-
-# shellcheck source=../common/fnginstall-common.sh
-. ./fnginstall-common.sh
-
-FNGYSTEM_MIN_VERSION=17.0
-
-#========================================
-# Cleanup on exit
-#========================================
-cleanup()
-{
-    trap nop EXIT
-    trap nop INT
-    set +e
-    info_msg
-    info_msg "Cleanup workspace..."
-
-    $DEBUG || rmdir -rf "$TMPDIR" 2>/dev/null
-    $DEBUG && info_msg "Debug: Don't erase $TMPDIR."
-}
-
-
-#======================================================
-# Argument parsing
-#======================================================
-
-parse_extra_args()
-{
-    ret=1
-    case $1 in
-        -b|--BOOTLOADER|-b=*|--BOOTLOADER=*)
-            parse_args_value BOOTLOADER_PACKAGE "$1" "$2" || ret=2
-            BOOTLOADER_PACKAGE="$SUBDIR$BOOTLOADER_PACKAGE"
-            ;;
-        *) return 0;;
-    esac
-    return $ret
-}
-
-parse_args "" "$@"
-
-setup_download_prefix
-
-check_startup_conditions
-
-# Setup exit traps, so cleanup is called when an error happens
-trap exit_error EXIT
-trap exit_error INT
-
-
-# Get Bootloader from server
-cd "$TMPDIR"
-
-do_load "$BOOTLOADER_PACKAGE" || exit $?
-
-# Extract the tar
-COMPRESSION="$(tar_compression "$BOOTLOADER_PACKAGE")"
-tar "$COMPRESSION"xf "$BOOTLOADER_PACKAGE"
-
-MD5SUM=$(find . -name "fngboot*.md5" | head -n 1)
-MD5SUM=${MD5SUM#*/} # remove the ./
-BOOTLOADER="${MD5SUM%.*}" # like the md5sum but without .md5
-
-[ -r "$MD5SUM" ] || exit_error "$MD5SUM not found."
-grep -e "  $BOOTLOADER$" "$MD5SUM" > "$MD5SUM.tmp" || exit_error "$MD5SUM does not contain entry for $BOOTLOADER"
-md5sum -c "$MD5SUM.tmp" || exit_error "MD5 sum is not correct"
-
-#============================================
-#
-#============================================
-DEV="/dev/$TARGETDEVICE"
-PART_BOOTLOADER="${DEV}boot0"
-
-# Stop on errors
-set -e
-
-#============================================
-# Write to disk
-#===========================================
-
-partition_write_access "$PART_BOOTLOADER"
-
-# Write new system to eMMC
-
-# INFO: The mmc bootpart command selects the boot
-# partition on the eMMC.
-# The selection is bitwise coded:
-#   0x0 = Off
-#   0x1 = Boot 1 (mmcblkNboot0)
-#   0x2 = Boot 2 (mmcblkNboot1)
-#   0x7 = User Area (mmcblkN)
-
-TARGETDEVICE_BOOTLOADER="$PART_BOOTLOADER"
-MMC_BOOTPART_NO=1
-BOOTLOADER_SEEK=2
-
-milestone "Writing ${BOOTLOADER} to $TARGETDEVICE_BOOTLOADER ..."
-$DRYRUN dd if=/dev/zero of="$TARGETDEVICE_BOOTLOADER" bs=1M || true
-$DRYRUN dd if="${BOOTLOADER}" of="$TARGETDEVICE_BOOTLOADER" bs=512 seek=$BOOTLOADER_SEEK
-
-# If the target is an emmc, set the boot config flags
-if [ -b "/dev/${TARGETDEVICE}boot0" ];then
-# Old FNG Systems do not have a mmc command
-    if ! command -v mmc > /dev/null 2>&1
-    then
-        $DRYRUN echo 8 > /sys/devices/platform/sdhci-esdhc-imx.3/mmc_host/mmc0/mmc0:0001/boot_config
-    else
-# Not sure if this command is needed:
-# # Set the boot mode on emmc, sdcard does not need this
-#        $DRYRUN mmc bootbus set dual x1 x8 $DEV
-        $DRYRUN mmc bootpart enable "$MMC_BOOTPART_NO" 1 $DEV
-    fi
-fi
-
-#============================================
-
-# Set write protection again
-partition_write_access "$PART_BOOTLOADER" disable
-
-#============================================
-# Done writing
-#============================================
-
-sync
-
-# Setup cleanup function to be called on exit (overwrites the error)
-trap cleanup EXIT
-milestone "Update successful"