imported from branch kuk_lf-5.10.y_android
 currently only ConXM baseboards with HDMI are supported

 On some modules the interrupt of the bd718x7 is not connected to anything,
 but the PMIC functionality is needed anyway. For such modules it would be
 helpfull if the probe function succeeds without an interrupt configured.

The boot strapping in U-Boot isn't integrated correctly yet. Because of
this, we have a collision between the ethphys. Since we don't use the
second phy right now, we disable it.

Dmitry Petrov authored 1 year ago and Jonas Höppner committed 1 year ago

Instead of using always-on regulator, configure it as supply for
the port, so it gets enabled when the port is opened.

Dmitry Petrov authored 1 year ago and Jonas Höppner committed 1 year ago

Add the fixed regulator for the CAN/RS485 output of SANTINO, that may be
optionally galvanic isolated.

Add rts-gpios for RS485.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@42bfe4f0

build:prepare: Add setup script for Git Credentials

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@24653ff8

build:machines: Add i.MX93 to the build job template

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@7aae72ea

Re-enable sourcery

With the free open source plan, sourcery works only when called from the
repository's root directory. Re-enable it by calling it from there.

Also apply sourcery's suggestions to file generate_firmware_package.py,
which did not exist before disabling sourcery.

Dmitry Petrov authored 1 year ago and Felix Gerking committed 1 year ago

There is no such property in device tree. Previously it was set by kernel
in runtime (see function "set_video_mode_from_xml" in guf_xml_to_dt.c).

Dmitry Petrov authored 1 year ago and Felix Gerking committed 1 year ago

Modified platform initialization to check for (a) @lcd@-node in device-tree
to identify systems with parallel LCD-interface and (b) presence of enabled
spread-spectrum settings in device-tree to change the IPU-DI PLL from
PLL5 to PLL2 in this case to allow spread-spectrum clocking of parallel
LCD-displays

Dmitry Petrov authored 1 year ago and Felix Gerking committed 1 year ago

The helper function checks if spread spectrum clocking is enabled in
device tree.

Hard code timings for the FG0700Q5DSSWBGL1 display, which is used on
SANTINO x2l 7.0

Also disabled "epdc" node to get rid of error in dmesg:
  imx_epdc_fb 20f4000.epdc: can't get/select pinctrl

Dmitry Petrov authored 1 year ago and Tobias Kahlki committed 1 year ago

Use interpolated brightness table for i.MX6 SAN boards.
The "brightness-levels" values are taken from XML configurations.

Dmitry Petrov authored 1 year ago and Tobias Kahlki committed 1 year ago

The wrong compatible string is used for the EEPROM.
STMicroelectronics M24C32/TSSOP8 is installed on i.MX6 SAN boards.

Dmitry Petrov authored 1 year ago and Tobias Kahlki committed 1 year ago

The device uses an out-of-tree driver with SECO specific changes.
A new compatible ID can be found in the source code of the driver [1].

Links:
[1] https://git.seco.com/seco-ne/yocto/layers/meta-seconorth-machine/-/blob/11c61f6430542b0516a6446d0585526fc1eed86c/recipes-kernel/modules/rtc-pcf8563-guf/rtc-pcf8563-guf.c#L618

Dietmar Muscholik authored 1 year ago and Tobias Kahlki committed 1 year ago

The GPIOs for DISPLAY_ENABLE, TOUCH_INT and TOUCH_ENABLE have been moved
to the top-level .dts files because they may vary with the
baseboard/display-combination. Even worse: In the schematics of pConXS the
high-active TOUCH_ENABLE input is labeled as low-active WAKE.

The led_button lable is now set to the virtual gpio that simulates the
behavior of the old at42qt1011 cap. touch sensor.
The properties are selected for the dual-espresso board.
To remain compatible for devices with the old at42qt1011 sensors, a
corresponding overlay is added that can be applied during installation.

BCS 746-001576

The driver is derived from the input cap11xx.c driver:
drivers/input/keyboard/cap11xx.c
Instead of providing an input device, the driver registers a gpiochip
with a read-only line for each sensor-input.
The led handling was kept commented in source so that it can be
implemented if required.
The driver has so far only been tested with the cap1293 chip.

Additional dt properties:
disable-rf-filter: If set disables the RF noise filter
delta-sense: Allows to set sensivity for all inputs, the value should be
             in range 0x00 to 0x07 (see reg 0x1f in datasheet)
invert-gpio-output: If set inverts the gpioget output.

BCS 746-001576

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@51e0cf67

build:stages: Add Firmware Package JSON stage

The old Alphaplan stage is deprecated and was removed in a prior commit.
Add new stage to generate the Firmware Package JSON files that do replace
the old Alphaplan articles.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@1830cb02

And another improvement for the build-up-to-date job

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f7f33de5

Improve the output message in the build-up-to-date job a bit more

Use explicit line breaks to make the message look better.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@68aaab94

Improve the output message in the build-up-to-date job

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@26b9eb1d

Rename "check" job to "build-up-to-date"

This is a more meaningful name and might give a hint what the job does.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@07f0c898

Make build runner tag configurable

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@0d70d719

Disable sourcery check

Sourcery changed its license model to only be available for open source
projects with the free plan. According to the documentation, sourcery
should detect automatically whether it is running on an open source
repo. This does not work in our case, though. Disable it until we find a
way to correctly make it work.

The display uses dual LVDS, so the clock-frequency property in the panel
node must be set to a value twice as high as the typical display freq.
Overall the output visually looks good and the frequency is within the
specified range. However, the power sequence and porches have not yet
been measured.
In addition, the auo-g156han02.dtsi file contains some information on how
to achieve the desired display clock via the native LVDS interface.

BCS 746-001569

By default the VIDEO_PLL1 frequency defined in the imx8mp.dtsi is not
easily adjustable from lower devicetrees. Add a macro that makes it
possible to adjust the frequencies in the base dts files as it is
already possible for imx8mm. In this way, the video pll can be set
explicitly for a specific display.

BCS 746-001569

Add 987MHz setpoint for the AUO G156HAN02 display.

BCS 746-001569

Felix Gerking authored 1 year ago and Jonas Höppner committed 1 year ago

Copied changes from linux-5.10.104-guf kernel branch.
Commit 45df36ce8fbff0538d84c5f929743bb990683c94

BCS 746-001388

Tobias Kahlki authored 1 year ago and Jonas Höppner committed 1 year ago

The i.MX6 ULL has an audio block equipped, that can generate audio via a
standard GPIO. Since the MQS (Medium Quality Sound) is a very basic audio
interface, it doesn't provide any filtering of unwanted artifacts in the
audio stream. This leads to a popping noise when playing audio on the
Nallino. The patch changes the SAI to always generate a signal for the
MQS and transfers the control of the external amplifier to the MQS driver.
This helps in reducing the noticeable interference when playing audio.

Original patch-set by Sam Crossman <sam.crossman@seco.com>

f750e64c
22e654f0
5b432bde

BCS 746-001388

Forward-ported commit b71074700019f52ff263bf0dfd0c500b902b4279 to
linux-5.15.32-seco.

Signed-off-by: Dmitry Petrov <dmitry.petrov@rtsoft.de>

Felix Gerking authored 1 year ago and Jonas Höppner committed 1 year ago

Combination the following commits:
0fa8a7d7
39e1d863

BCS 746-001388

The regulators are always logically disabled by the kernel, though
they are hardwired on. The always on flag should change this and remove
the messages.

Felix Gerking authored 1 year ago and Jonas Höppner committed 1 year ago

The mapping is copied from the linux-5.10.104-guf kernel.

BCS 746-001388

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@9be2c52b

pipeline:build: Fix indentation of here-doc

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@245e6537

pipeline:build: Make generation of install script optional

The Genio 700 platform doesn't have an fng_install.sh. Currently, the
pipeline fails because of the exit code in the script check.
Make the generation of the install command optional and only show a
warning if the script is missing.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8fedce8a

pipeline:build: Add MediaTek Genio 700 SoC

Dietmar Muscholik authored 1 year ago and Tobias Kahlki committed 1 year ago

 drm_bridge_get_next_bridge() may return NULL if there is no successor.
 Dereferencing this pointer causes the kernel to hang.

Dietmar Muscholik authored 1 year ago and Tobias Kahlki committed 1 year ago

  This is ugly because in this driver everything is hard coded, it consists of
  over 5000 lines and whenever a new display is needed it grows about at least
  40 lines. We should find a way to make this driver obsolet.

Dietmar Muscholik authored 1 year ago and Tobias Kahlki committed 1 year ago

  A SECO-version of the driver for EDT FocalTech touch added. It would be
  nicer to find out why the original driver does not behave as expected
  and correct it.

Dietmar Muscholik authored 1 year ago and Tobias Kahlki committed 1 year ago

  Trizeps8 modules may be equipped with a FPGA that serves as a bridge between
  DSI and RBG. All this driver does is enable this function by sending a
  command over I2C to the FPGA.

Jonas Höppner authored 1 year ago and Tobias Kahlki committed 1 year ago

The trizeps modules may be equipped with an MCU that exposes different
features like gpio and touch.
This driver is based on kuk_tr8mcu_touch.c but splits up into an mfd
part and implements the gpio part. Further features are not yet
available.

BCS 746-00127

Hard code timings for the FX050053DSSWBG01 display, which is used on
SANTINO LT x2l

Hard code timings for the FX050053DSSWBG01 display, which is used on
NALLINO S 5.0 OF PCT device out of box, in device tree.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@6f773de5

Remove Alphaplan stage

We do not use Alphaplan anymore. Remove everything Alphaplan related
stuff from the pipeline.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@56bd1900

Confluence: add helper script to get page content

This can be helpful if something is configurable in the GUI editor and
we can't figure out to do the same thing via the API.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c3b794c6

Confluence: enforce fixed page width on creation

On page creation via the API, the page always seems to be created with
full width, even if "full_width=False" is set. Update the page right
after creating it in order to correctly set it to fixed width.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@82053a2f

Confluence: set width for download table columns

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@96f5745c

Confluence: group download files by type