Select Git revision
Search by author
- Any Author
- authors
-
Alexander Sterger alexander.sterger
-
Andrii Sosiuk
andrii.sosiuk
-
**** group_556_bot_74cce396359e27efa6278607a72ef350
-
Bernd Mierzowski bernd.mierzowski
-
Christian Stimming
christian.stimming
-
Christoph Kutzera christoph.kutzera
-
Christos Karampeazis
-
CI Variables Management Service Account service_account_ci_vars_management
-
Davide Cardillo
davide.cardillo
-
Dietmar Muscholik dietmar.muscholik
-
Dmitry Petrov dmitry.petrov
-
Felix Gerking felix.gerking
-
GitBot
gitbot
-
Git Bot Service Account
service_account_gitbot
-
Hai Nam Tran hai.nam.tran
-
Hilmar Bode hilmar.bode
-
Jan-Ove Korneffel jan-ove.korneffel
-
Jonas Höppner jonas.hoeppner
-
Lorenzo Pagliai
lorenzo.pagliai
-
Lukas Rosky lukas.rosky
- Feb 16, 2022
-
-
TATSUKAWA KOSUKE (立川 江介) authored
commit c816b2e65b0e86b95011418cad334f0524fc33b8 upstream. The poll man page says POLLRDNORM is equivalent to POLLIN when used as an event. $ man poll <snip> POLLRDNORM Equivalent to POLLIN. However, in n_tty driver, POLLRDNORM does not return until timeout even if there is terminal input, whereas POLLIN returns. The following test program works until kernel-3.17, but the test stops in poll() after commit 57087d51 ("tty: Fix spurious poll() wakeups"). [Steps to run test program] $ cc -o test-pollrdnorm test-pollrdnorm.c $ ./test-pollrdnorm foo <-- Type in something from the terminal followed by [RET]. The string should be echoed back. ------------------------< test-pollrdnorm.c >------------------------ #include <stdio.h> #include <errno.h> #include <poll.h> #include <unistd.h> void main(void) { int n; unsigned char buf[8]; struct pollfd fds[1] = {{ 0, POLLRDNORM, 0 }}; n = poll(fds, 1, -1); if (n < 0) perror("poll"); n = read(0, buf, 8); if (n < 0) perror("read"); if (n > 0) write(1, buf, n); } ------------------------------------------------------------------------ The attached patch fixes this problem. Many calls to wake_up_interruptible_poll() in the kernel source code already specify "POLLIN | POLLRDNORM". Fixes: 57087d51 ("tty: Fix spurious poll() wakeups") Cc: stable@vger.kernel.org Signed-off-by:Kosuke Tatsukawa <tatsu-ab1@nec.com> Link: https://lore.kernel.org/r/TYCPR01MB81901C0F932203D30E452B3EA5209@TYCPR01MB8190.jpnprd01.prod.outlook.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jakob Koschel authored
commit 28cb138f559f8c1a1395f5564f86b8bbee83631b upstream. in vt_setactivate an almost identical code path has been patched with array_index_nospec. In the VT_ACTIVATE path the user input is from a system call argument instead of a usercopy. For consistency both code paths should have the same mitigations applied. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. Co-developed-by:
Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by:
Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220127144406.3589293-2-jakobkoschel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jakob Koschel authored
commit 61cc70d9e8ef5b042d4ed87994d20100ec8896d9 upstream. array_index_nospec ensures that an out-of-bounds value is set to zero on the transient path. Decreasing the value by one afterwards causes a transient integer underflow. vsa.console should be decreased first and then sanitized with array_index_nospec. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. Co-developed-by:
-
Vladimir Oltean authored
[ Upstream commit 51a04ebf21122d5c76a716ecd9bfc33ea44b2b39 ] Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus) will free the memory backing the mdio_bus as well. Therefore, the mdio_bus->list element is freed memory, but we continue to iterate through the list of MDIO buses using that list element. To fix this, use the proper list iterator that handles element deletion by keeping a copy of the list element next pointer. Fixes: f53a2ce893b2 ("net: dsa: mv88e6xxx: don't use devres for mdiobus") Reported-by:Rafael Richter <rafael.richter@gin.de> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220210174017.3271099-1-vladimir.oltean@nxp.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Foster authored
[ Upstream commit 7fbf6795d127a3b1bb39b0e42579904cf6db1624 ] An ongoing workqueue populates the stats buffer. At the same time, a user might query the statistics. While writing to the buffer is mutex-locked, reading from the buffer wasn't. This could lead to buggy reads by ethtool. This patch fixes the former blamed commit, but the bug was introduced in the latter. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Fixes: 1e1caa97 ("ocelot: Clean up stats update deferred work") Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Reported-by:
-
Jesse Brandeburg authored
[ Upstream commit 46b699c50c0304cdbd725d7740073a7f9d5edb10 ] The driver was avoiding offload for IPIP (at least) frames due to parsing the inner header offsets incorrectly when trying to check lengths. This length check works for VXLAN frames but fails on IPIP frames because skb_transport_offset points to the inner header in IPIP frames, which meant the subtraction of transport_header from inner_network_header returns a negative value (-20). With the code before this patch, everything continued to work, but GSO was being used to segment, causing throughputs of 1.5Gb/s per thread. After this patch, throughput is more like 10Gb/s per thread for IPIP traffic. Fixes: e94d4478 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 21338d58736ef70eaae5fd75d567a358ff7902f9 ] Propagate the error code from ice_get_link_default_override() instead of returning success. Fixes: ea78ce4d ("ice: add link lenient and default override support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Tested-by:
-
Robert-Ionut Alexa authored
[ Upstream commit 9ccc6e0c8959a019bb40f6b18704b142c04b19a8 ] The netdev should be unregistered before we are disconnecting from the MAC/PHY so that the dev_close callback is called and the PHY and the phylink workqueues are actually stopped before we are disconnecting and destroying the phylink instance. Fixes: 71947923 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by:
Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Raju Rangoju authored
[ Upstream commit 68c2d6af1f1e469544d6cbe9a601d96fb9c00e7f ] Hardware interrupts are enabled during the pci probe, however, they are not disabled during pci removal. Disable all hardware interrupts during pci removal to avoid any issues. Fixes: e7537740 ("amd-xgbe: Update PCI support to use new IRQ functions") Suggested-by:
Selwin Sebastian <Selwin.Sebastian@amd.com> Signed-off-by:
Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by:
-
Jon Maloy authored
[ Upstream commit c7223d687758462826a20e9735305d55bb874c70 ] It would be easy to craft a message containing an illegal binding table update operation. This is handled correctly by the code, but the corresponding warning printout is not rate limited as is should be. We fix this now. Fixes: b97bf3fd ("[TIPC] Initial merge") Signed-off-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
Joel Stanley authored
[ Upstream commit bc1c3c3b10db4f37c41e6107751a8d450d9c431c ] Fix loading of the driver when built as a module. Fixes: f160e994 ("net: phy: Add mdio-aspeed") Signed-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Andrew Jeffery <andrew@aj.id.au> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 68468d8c4cd4222a4ca1f185ab5a1c14480d078c ] veth being NETIF_F_LLTX enabled, we need to be more careful whenever we read/write rq->rx_notify_masked. BUG: KCSAN: data-race in veth_xmit / veth_xmit write to 0xffff888133d9a9f8 of 1 bytes by task 23552 on cpu 0: __veth_xdp_flush drivers/net/veth.c:269 [inline] veth_xmit+0x307/0x470 drivers/net/veth.c:350 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3473 dev_hard_start_xmit net/core/dev.c:3489 [inline] __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53 NF_HOOK include/linux/netfilter.h:307 [inline] br_forward_finish net/bridge/br_forward.c:66 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242 br_dev_xmit+0x8b6/0x960 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3473 dev_hard_start_xmit net/core/dev.c:3489 [inline] __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149 neigh_hh_output include/net/neighbour.h:525 [inline] neigh_output include/net/neighbour.h:539 [inline] ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:451 [inline] ip_local_out net/ipv4/ip_output.c:126 [inline] ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888133d9a9f8 of 1 bytes by task 23563 on cpu 1: __veth_xdp_flush drivers/net/veth.c:268 [inline] veth_xmit+0x2d6/0x470 drivers/net/veth.c:350 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3473 dev_hard_start_xmit net/core/dev.c:3489 [inline] __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53 NF_HOOK include/linux/netfilter.h:307 [inline] br_forward_finish net/bridge/br_forward.c:66 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242 br_dev_xmit+0x8b6/0x960 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3473 dev_hard_start_xmit net/core/dev.c:3489 [inline] __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149 neigh_hh_output include/net/neighbour.h:525 [inline] neigh_output include/net/neighbour.h:539 [inline] ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:451 [inline] ip_local_out net/ipv4/ip_output.c:126 [inline] ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 23563 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00064-gc36c04c2e132 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 948d4f21 ("veth: Add driver XDP") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit 9eeabdf17fa0ab75381045c867c370f4cc75a613 ] When uncloning an skb dst and its associated metadata, a new dst+metadata is allocated and later replaces the old one in the skb. This is helpful to have a non-shared dst+metadata attached to a specific skb. The issue is the uncloned dst+metadata is initialized with a refcount of 1, which is increased to 2 before attaching it to the skb. When tun_dst_unclone returns, the dst+metadata is only referenced from a single place (the skb) while its refcount is 2. Its refcount will never drop to 0 (when the skb is consumed), leading to a memory leak. Fix this by removing the call to dst_hold in tun_dst_unclone, as the dst+metadata refcount is already 1. Fixes: fc4099f1 ("openvswitch: Fix egress tunnel info.") Cc: Pravin B Shelar <pshelar@ovn.org> Reported-by:
Vlad Buslov <vladbu@nvidia.com> Tested-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit cfc56f85e72f5b9c5c5be26dc2b16518d36a7868 ] When uncloning an skb dst and its associated metadata a new dst+metadata is allocated and the tunnel information from the old metadata is copied over there. The issue is the tunnel metadata has references to cached dst, which are copied along the way. When a dst+metadata refcount drops to 0 the metadata is freed including the cached dst entries. As they are also referenced in the initial dst+metadata, this ends up in UaFs. In practice the above did not happen because of another issue, the dst+metadata was never freed because its refcount never dropped to 0 (this will be fixed in a subsequent patch). Fix this by initializing the dst cache after copying the tunnel information from the old metadata to also unshare the dst cache. Fixes: d71785ff ("net: add dst_cache to ovs vxlan lwtunnel") Cc: Paolo Abeni <pabeni@redhat.com> Reported-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Louis Peens authored
[ Upstream commit 7db788ad627aabff2b74d4f1a3b68516d0fee0d7 ] When looking for a global mac index the extra NFP_TUN_PRE_TUN_IDX_BIT that gets set if nfp_flower_is_supported_bridge is true is not taken into account. Consequently the path that should release the ida_index in cleanup is never triggered, causing messages like: nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex. nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex. nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex. after NFP_MAX_MAC_INDEX number of reconfigs. Ultimately this lead to new tunnel flows not being offloaded. Fix this by unsetting the NFP_TUN_PRE_TUN_IDX_BIT before checking if the port is of type OTHER. Fixes: 2e0bc7f3 ("nfp: flower: encode mac indexes with pre-tunnel rule check") Signed-off-by:Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220208101453.321949-1-simon.horman@corigine.com Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5611a00697c8ecc5aad04392bea629e9d6a20463 ] ip[6]mr_free_table() can only be called under RTNL lock. RTNL: assertion failed at net/core/dev.c (10367) WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367 Modules linked in: CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367 Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4 R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000 FS: 00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509 ip6mr_free_table net/ipv6/ip6mr.c:389 [inline] ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline] ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline] ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298 ops_init+0xaf/0x470 net/core/net_namespace.c:140 setup_net+0x54f/0xbb0 net/core/net_namespace.c:331 copy_net_ns+0x318/0x760 net/core/net_namespace.c:475 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 copy_namespaces+0x391/0x450 kernel/nsproxy.c:178 copy_process+0x2e0c/0x7300 kernel/fork.c:2167 kernel_clone+0xe7/0xab0 kernel/fork.c:2555 __do_sys_clone+0xc8/0x110 kernel/fork.c:2672 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f4ab89f9059 Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f. RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038 RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059 RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000 RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300 R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000 </TASK> Fixes: f243e5a7 ("ipmr,ip6mr: call ip6mr_free_table() on failure path") Signed-off-by:
-
Vladimir Oltean authored
[ Upstream commit 0d120dfb5d67edc5bcd1804e167dba2b30809afd ] As explained in commits: 74b6d7d1 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The GSWIP switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the GSWIP switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The gswip driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
[ Upstream commit 209bdb7ec6a28c7cdf580a0a98afbc9fc3b98932 ] As explained in commits: 74b6d7d1 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Felix VSC9959 switch is a PCI device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the felix switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The felix driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc_size() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by:
-
Vladimir Oltean authored
[ Upstream commit 08f1a20822349004bb9cc1b153ecb516e9f2889d ] As explained in commits: 74b6d7d1 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Starfighter 2 is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the bcm_sf2 switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The bcm_sf2 driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by:
-
Vladimir Oltean authored
[ Upstream commit 50facd86e9fbc4b93fe02e5fe05776047f45dbfb ] As explained in commits: 74b6d7d1 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The ar9331 is an MDIO device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the ar9331 switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The ar9331 driver doesn't have a complex code structure for mdiobus removal, so just replace of_mdiobus_register with the devres variant in order to be all-devres and ensure that we don't free a still-registered bus. Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Vladimir Oltean authored
[ Upstream commit f53a2ce893b2c7884ef94471f170839170a4eba0 ] As explained in commits: 74b6d7d1 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The mv88e6xxx is an MDIO device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the Marvell switch driver on shutdown. systemd-shutdown[1]: Powering off. mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down fsl-mc dpbp.9: Removing from iommu group 7 fsl-mc dpbp.8: Removing from iommu group 7 ------------[ cut here ]------------ kernel BUG at drivers/net/phy/mdio_bus.c:677! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15 pc : mdiobus_free+0x44/0x50 lr : devm_mdiobus_free+0x10/0x20 Call trace: mdiobus_free+0x44/0x50 devm_mdiobus_free+0x10/0x20 devres_release_all+0xa0/0x100 __device_release_driver+0x190/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x4c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 kernel_power_off+0x34/0x6c __do_sys_reboot+0x15c/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The Marvell driver already has a good structure for mdiobus removal, so just plug in mdiobus_free and get rid of devres. Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by:
Daniel Klauer <daniel.klauer@gin.de> Reviewed-by:
-
Mahesh Bandewar authored
[ Upstream commit 23de0d7b6f0e3f9a6283a882594c479949da1120 ] When 803.2ad mode enables a participating port, it should update the slave-array. I have observed that the member links are participating and are part of the active aggregator while the traffic is egressing via only one member link (in a case where two links are participating). Via kprobes I discovered that slave-arr has only one link added while the other participating link wasn't part of the slave-arr. I couldn't see what caused that situation but the simple code-walk through provided me hints that the enable_port wasn't always associated with the slave-array update. Fixes: ee637714 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit cc38ef936840ac29204d806deb4d1836ec509594 ] Setting the output of a GPIO to 1 using gpiod_set_value(), followed by reading the same GPIO using gpiod_get_value(), will currently yield an incorrect result. This is because the SiFive GPIO device stores the output values in reg_set, not reg_dat. Supply the flag BGPIOF_READ_OUTPUT_REG_SET to bgpio_init() so that the generic driver reads the correct register. Fixes: 96868dce ("gpio/sifive: Add GPIO driver for SiFive SoCs") Signed-off-by:
Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> [Bartosz: added the Fixes tag] Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit dc0075ba7f387fe4c48a8c674b11ab6f374a6acc ] Commit 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle") made acpi_ec_dispatch_gpe() check pm_wakeup_pending(), but that is before canceling the SCI wakeup, so pm_wakeup_pending() is always true. This causes the loop in acpi_ec_dispatch_gpe() to always terminate after one iteration which may not be correct. Address this issue by canceling the SCI wakeup earlier, from acpi_ec_dispatch_gpe() itself. Fixes: 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle") Signed-off-by:Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Christoph Niedermaier authored
[ Upstream commit 6df4432a5eca101b5fd80fbee41d309f3d67928d ] In the function panel_simple_probe() the pointer panel->desc is assigned to the passed pointer desc. If function panel_dpi_probe() is called panel->desc will be updated, but further on only desc will be evaluated. So update the desc pointer to be able to use the data from the function panel_dpi_probe(). Fixes: 4a1d0dbc ("drm/panel: simple: add panel-dpi support") Signed-off-by:
Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Marek Vasut <marex@denx.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> To: dri-devel@lists.freedesktop.org Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com Signed-off-by:
-
Samuel Mendoza-Jonas authored
[ Upstream commit fe68195daf34d5dddacd3f93dd3eafc4beca3a0e ] From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb around new data in the page buffer shared with the ixgbe PF. This uses either a 2K or 3K buffer, and offsets the DMA mapping by NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to ensure the PF does not write a full 2K bytes into the buffer, which is actually 2K minus the offset. However on the 82599 virtual function, the RXDCTL mechanism is not available. The driver attempts to work around this by using the SET_LPE mailbox method to lower the maximm frame size, but the ixgbe PF driver ignores this in order to keep the PF and all VFs in sync[0]. This means the PF will write up to the full 2K set in SRRCTL, causing it to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer. With 4K pages split into two buffers, this means it either writes NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA mapping. Avoid this by only enabling build_skb when using "large" buffers (3K). These are placed in each half of an order-1 page, preventing the PF from writing past the end of the mapping. [0]: Technically it only ever raises the max frame size, see ixgbe_set_vf_lpe() in ixgbe_sriov.c Fixes: f15c5ba5 ("ixgbevf: add support for using order 1 pages to receive large frames") Signed-off-by:
Samuel Mendoza-Jonas <samjonas@amazon.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Dongjin Kim authored
[ Upstream commit bc41099f060ea74ac8d02c51bd0f5f46d969bedf ] Typo in audio amplifier node, dioo2133 -> dio2133 Signed-off-by:
Dongjin Kim <tobetter@gmail.com> Fixes: ef599f5f ("arm64: dts: meson: convert ODROID-N2 to dtsi") Fixes: 67d141c1 ("arm64: dts: meson: odroid-n2: add jack audio output support") Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit d1ca60efc53d665cf89ed847a14a510a81770b81 ] When userspace, e.g. conntrackd, inserts an entry with a specified helper, its possible that the helper is lost immediately after its added: ctnetlink_create_conntrack -> nf_ct_helper_ext_add + assign helper -> ctnetlink_setup_nat -> ctnetlink_parse_nat_setup -> parse_nat_setup -> nfnetlink_parse_nat_setup -> nf_nat_setup_info -> nf_conntrack_alter_reply -> __nf_ct_try_assign_helper ... and __nf_ct_try_assign_helper will zero the helper again. Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like when helper is assigned via ruleset. Dropped old 'not strictly necessary' comment, it referred to use of rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER(). NB: Fixes tag intentionally incorrect, this extends the referenced commit, but this change won't build without IPS_HELPER introduced there. Fixes: 6714cf54 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT") Reported-by:Pham Thanh Tuyen <phamtyn@gmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 46963e2e0629cb31c96b1d47ddd89dc3d8990b34 ] If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact, dma_buf_fd() called fd_install() before, i.e. "consumed" one reference, leaving us with none. Calling dma_buf_put() will therefore put a reference we no longer own, leading to a valid file descritor table entry for an already released 'file' object which is a straight use-after-free. Simply avoid calling dma_buf_put() and rely on the process exit code to do the necessary cleanup, if needed, i.e. if the file descriptor is still valid. Fixes: 6cffd795 ("misc: fastrpc: Add support for dmabuf exporter") Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Mathias Krause <minipli@grsecurity.net> Link: https://lore.kernel.org/r/20220127130218.809261-1-minipli@grsecurity.net Signed-off-by:
-
Dave Stevenson authored
[ Upstream commit 1d118965965f89948236ebe23072bb1fca5e7832 ] The 2711 pixel valve can't produce odd horizontal timings, and checks were added to vc4_hdmi_encoder_atomic_check and vc4_hdmi_encoder_mode_valid to filter out/block selection of such modes. Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing values before programming them into the PV. The PV values, therefore, can not be odd, and so the modes can be supported. Amend the filtering appropriately. Fixes: 57fb32e6 ("drm/vc4: hdmi: Block odd horizontal timings") Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 2cba05451a6d0c703bb74f1a250691404f27c4f1 ] If the parent GPIO controller is a sleeping controller (e.g. a GPIO controller connected to I2C), getting or setting a GPIO triggers a might_sleep() warning. This happens because the GPIO Aggregator takes the can_sleep flag into account only for its internal locking, not for calling into the parent GPIO controller. Fix this by using the gpiod_[gs]et*_cansleep() APIs when calling into a sleeping GPIO controller. Reported-by:
Mikko Salomäki <ms@datarespons.se> Fixes: 828546e2 ("gpio: Add GPIO Aggregator") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Udipto Goswami authored
[ Upstream commit ebe2b1add1055b903e2acd86b290a85297edc0b3 ] Consider a case where ffs_func_eps_disable is called from ffs_func_disable as part of composition switch and at the same time ffs_epfile_release get called from userspace. ffs_epfile_release will free up the read buffer and call ffs_data_closed which in turn destroys ffs->epfiles and mark it as NULL. While this was happening the driver has already initialized the local epfile in ffs_func_eps_disable which is now freed and waiting to acquire the spinlock. Once spinlock is acquired the driver proceeds with the stale value of epfile and tries to free the already freed read buffer causing use-after-free. Following is the illustration of the race: CPU1 CPU2 ffs_func_eps_disable epfiles (local copy) ffs_epfile_release ffs_data_closed if (last file closed) ffs_data_reset ffs_data_clear ffs_epfiles_destroy spin_lock dereference epfiles Fix this races by taking epfiles local copy & assigning it under spinlock and if epfiles(local) is null then update it in ffs->epfiles then finally destroy it. Extending the scope further from the race, protecting the ep related structures, and concurrent accesses. Fixes: a9e6f83c ("usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable") Co-developed-by:Udipto Goswami <quic_ugoswami@quicinc.com> Reviewed-by:
John Keeping <john@metanate.com> Signed-off-by:
Pratham Pratap <quic_ppratap@quicinc.com> Signed-off-by:
-
Rob Herring authored
[ Upstream commit 6d58c5e21a3fe355ce6d1808e96d02a610265218 ] The correct property name is 'assigned-clock-parents', not 'assigned-clocks-parents'. Though if the platform works with the typo, one has to wonder if the property is even needed. Signed-off-by:
Rob Herring <robh@kernel.org> Fixes: 8b8c7d97 ("ARM: dts: imx7ulp: Add wdog1 node") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Robert Hancock authored
[ Upstream commit 37291f60d0822f191748c2a54ce63b0bc669020f ] TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was not preserving the existing register value for other lanes, so enabling the PHY in SGMII mode on one lane zeroed out the settings for all other lanes, causing other PS-GTR peripherals such as USB3 to malfunction. Use xpsgtr_clr_set to only manipulate the desired bits in the register. Fixes: 4a33bea0 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Acked-by:
Michal Simek <michal.simek@xilinx.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20220126001600.1592218-1-robert.hancock@calian.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 993d66140f8d1c1853a3b58b77b43b681eb64dee ] GPIO7_IO00 is used as SD card detect. Properly describe this in the devicetree. Fixes: 40cdaa54 ("ARM: dts: imx6q-udoo: Add initial board support") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit 426aca16e903b387a0b0001d62207a745c67cfd3 ] If registering the platform driver fails, the function must not return without undoing the spi driver registration first. Fixes: c296d5f9 ("staging: fbtft: core support") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220118181338.207943-1-u.kleine-koenig@pengutronix.de Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 3375aa77135f6aeb1107ed839a2050a4118444bc ] The dt-bindings for the UART controller only allow the following values for Meson8 SoCs: - "amlogic,meson8b-uart", "amlogic,meson-ao-uart" - "amlogic,meson8b-uart" Use the correct fallback compatible string "amlogic,meson-ao-uart" for AO UART. Drop the "amlogic,meson-uart" compatible string from the EE domain UART controllers. Also update the order of the clocks to match the order defined in the yaml bindings. Fixes: b02d6e73 ("ARM: dts: meson8b: use stable UART bindings with correct gate clock") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 57007bfb5469ba31cacf69d52195e8b75f43e32d ] The dt-bindings for the UART controller only allow the following values for Meson8 SoCs: - "amlogic,meson8-uart", "amlogic,meson-ao-uart" - "amlogic,meson8-uart" Use the correct fallback compatible string "amlogic,meson-ao-uart" for AO UART. Drop the "amlogic,meson-uart" compatible string from the EE domain UART controllers. Also update the order of the clocks to match the order defined in the yaml schema. Fixes: 6ca77502 ("ARM: dts: meson8: use stable UART bindings with correct gate clock") Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 5225e1b87432dcf0d0fc3440824b91d04c1d6cc1 ] The dt-bindings for the UART controller only allow the following values for Meson6 SoCs: - "amlogic,meson6-uart", "amlogic,meson-ao-uart" - "amlogic,meson6-uart" Use the correct fallback compatible string "amlogic,meson-ao-uart" for AO UART. Drop the "amlogic,meson-uart" compatible string from the EE domain UART controllers. Fixes: ec9b5916 ("ARM: dts: meson6: use stable UART bindings") Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 23885389dbbbbc698986e77a45c1fc44a6e3632e ] Commit e428e250 ("ARM: dts: Configure system timers for omap3") caused a timer regression for beagleboard revision c where the system clockevent stops working if omap3isp module is unloaded. Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks applied that limit the usable timers for no good reason. This also affects the power management as we use the system clock instead of the 32k clock source. Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer quirks. This allows us to remove the timer quirks for later beagleboard revisions. We also need to update the related timer quirk check for the correct compatible property. Fixes: e428e250 ("ARM: dts: Configure system timers for omap3") Cc: linux-kernel@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Reported-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
