Commit 1bb4d0e5 authored by Giulio Grechi's avatar Giulio Grechi
Browse files

Release 3.3.0

parent 9a06ca0d
......@@ -17,3 +17,4 @@ See Documentation/00-INDEX for a list of what is contained in each file.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
......@@ -31,5 +31,14 @@
status = "okay";
};
};
fragment@1 {
target = <&pcie_clk_ref_pd>;
__overlay__ {
enable-active-low;
regulator-boot-on;
regulator-always-on;
};
};
};
......@@ -135,9 +135,6 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
enable-active-low;
regulator-boot-on;
regulator-always-on;
};
reg_audio: regulator-soc-audio {
......@@ -205,16 +202,6 @@
regulator-always-on;
};
reg_backlight_on: reg_backlighton {
compatible = "regulator-fixed";
regulator-name = "BACKLIGHT_ON";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
};
reg_clk_en: reg_clken {
compatible = "regulator-fixed";
......@@ -279,9 +266,9 @@
regulator-always-on;
};
lvds_backlight@0 {
compatible = "pwm-backlight";
pwms = <&pwm2 0 100000>;
lvds_backlight {
compatible = "mp3385-backlight";
pwms = <&pwm2 0 5000000>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
......@@ -295,6 +282,8 @@
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <80>;
client-device = <&mp3385_led_driver>;
enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
panel_lvds: lvds_panel {
......@@ -888,6 +877,14 @@
route-on-lineout;
mic-bias;
};
mp3385_led_driver: mp3385@31 {
status = "okay";
compatible = "seco,led_mp3385";
reg = <0x31>;
reg-val = <0xf1 0xc4 0x3b 0x03 0x7f 0xe0 0x01>;
};
};
&ecspi1 {
......
......@@ -389,8 +389,8 @@
pinctrl_i2c1: i2c1grp {
fsl,pins = <
SC_P_GPT0_CLK_DMA_I2C1_SCL 0x0600004c
SC_P_GPT0_CAPTURE_DMA_I2C1_SDA 0x0600004c
SC_P_USB_SS3_TC1_DMA_I2C1_SCL 0x06000021
SC_P_USB_SS3_TC2_DMA_I2C1_SDA 0x06000021
>;
};
......@@ -1301,7 +1301,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lvds1_lpi2c0>;
clock-frequency = <100000>;
status = "okay";
status = "disabled";
};
......
......@@ -862,3 +862,4 @@ CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
CONFIG_MEMTEST=y
CONFIG_BACKLIGHT_MP3385=y
......@@ -251,7 +251,6 @@ static struct esdhc_soc_data usdhc_imx8qxp_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
| ESDHC_FLAG_CQHCI
| ESDHC_FLAG_STATE_LOST_IN_LPMODE
| ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME,
};
......
......@@ -47,6 +47,11 @@ config BUZZER
If unsure, say Y.
config BACKLIGHT_MP3385
tristate "Backlight driver for MPS MP3385"
depends on BACKLIGHT_CLASS_DEVICE && I2C && PWM
help
This supports MPS MP3385 backlight driver.
config BOARD_SECO_ID
bool "S-Series board identification support"
......
......@@ -7,3 +7,4 @@ obj-$(CONFIG_BOARD_SECO_ID) += board_id.o
obj-$(CONFIG_HAVE_IMX8_SOC) += apx_wdog-trigger.o\
pwm_generic.o\
gsm-modem.o
obj-$(CONFIG_BACKLIGHT_MP3385) += mp3385_bl.o
This diff is collapsed.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment