- Jun 01, 2021
-
-
Chris Morgan authored
Add support for the Rockchip rk817 audio codec integrated into the rk817 PMIC. This is based on the sources provided by Rockchip from their BSP kernel. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Tested-by:
Maciej Matuszczyk <maccraft123mc@gmail.com> Reviewed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
- Apr 23, 2021
-
-
Shuming Fan authored
This patch adds the return value when the volume settings were changed. The userspace application might monitor the kcontrols to check which control changed. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210422103235.22048-1-shumingf@realtek.com Signed-off-by:
-
Shuming Fan authored
The DAPM event and mixer control could mute/unmute the capture directly. That will be confused that capture still works if the user settings is unmute before the capture. Therefore, this patch uses the variables to record the capture switch status of DAPM and mixer. Signed-off-by:
-
Jerome Brunet authored
Instead of using the clk embedded in the clk_hw (which is meant to go away), a clock provider which need to interact with its own clock should request clk reference through the clock provider API. Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210421120512.413057-6-jbrunet@baylibre.com Signed-off-by:
-
Jerome Brunet authored
Clock providers should be registered using the clk_hw API. Signed-off-by:
-
Jerome Brunet authored
Clock drivers ops should not call the clk API but the clock provider (clk_hw) instead. Signed-off-by:
-
Jerome Brunet authored
Clock providers should use the clk_hw API Reviewed-by:
-
- Apr 22, 2021
-
-
Niklas Carlsson authored
Configuring number of channels per LRCLK frame by using e.g. snd_soc_dai_set_tdm_slot before configuring DAI format was being overwritten by the latter due to a regmap_write which would write over the whole register. Signed-off-by:
Niklas Carlsson <niklasc@axis.com> Link: https://lore.kernel.org/r/20210422130226.15201-1-Niklas.Carlsson@axis.com Signed-off-by:
-
- Apr 20, 2021
-
-
Viorel Suman authored
Enable Daisy Chain if in TDM mode and the number of played channels is bigger than the maximum supported number of channels. Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1618915453-29445-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by:
-
Jack Yu authored
Add support on format S32_LE for rt1015p. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/377f0ee05d514c66b567eb6385ac7753@realtek.com Signed-off-by:
-
- Apr 19, 2021
-
-
David Ward authored
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350 and Venue 11 Pro 7140. They require the same handling for the combo jack to work with a headset: GPIO pin 6 must be set. The HDA driver always sets this pin on the ALC3263, which it distinguishes by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028 (Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to determine if Dell is the system vendor. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961 Signed-off-by:
David Ward <david.ward@gatech.edu> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.edu Signed-off-by:
-
David Ward authored
During jack detection, the combo jack is configured for a CTIA headset, and then for an OMTP headset, while sensing the mic connection. If a mic is not found in either case, the combo jack should be re-configured for headphones only. This is consistent with the HDA driver behavior. Signed-off-by:
-
David Ward authored
During jack detection, the combo jack is configured for a CTIA headset, and then for an OMTP headset, while sensing the mic connection. If a mic is not found in either case, the combo jack should be re-configured for headphones only. This is consistent with the HDA driver behavior. Signed-off-by:
-
Niklas Carlsson authored
The ALSA control readback functionality only works for non-volatile controls, i.e. control values that does not change on their own without driver interaction. This doesn't work for readbacks since the DSP firmware updates the control value. Disable the cache mechanism in the driver if the control name matches the prefix used for readbacks to ensure that the control value is valid. Signed-off-by:
-
David Ward authored
The GPIO configuration cannot be applied if the registers are inaccessible. This prevented the headset mic from working on the Dell XPS 13 9343. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171 Signed-off-by:
-
David Ward authored
This HDA verb sets the upper byte of the Configuration Default register, so only an 8-bit value should be used. For the rt298, the same fix was applied in commit f8f2dc4a ("ASoC: rt298: fix wrong setting of gpio2_en"). Signed-off-by:
-
Viorel Suman authored
check the return value of ak4458_rstn_control. Signed-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/rt5682.c:2404:42: style: Boolean result is used in bitwise operation. Clarify expression with parentheses. [clarifyCondition] (pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST)); ^ Signed-off-by:Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210416191144.27006-6-pierre-louis.bossart@linux.intel.com Signed-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/lpass-rx-macro.c:1626:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit] return ret; ^ sound/soc/codecs/lpass-rx-macro.c:1623:6: note: If condition 'ret' is true, the function will return/exit if (ret) ^ sound/soc/codecs/lpass-rx-macro.c:1626:9: note: Returning identical expression 'ret' return ret; ^ Signed-off-by:
-
- Apr 16, 2021
-
-
Jack Yu authored
Using new kcontrols "Capture Switch" and "Capture Volume" instead, remove kcontrols which no longer be used. Signed-off-by:
-
Jack Yu authored
Add main capture switch and main capture volume control. Main capture control has its own channel value respectivelly. Signed-off-by:
-
Jack Yu authored
Modification for code simplicity. Signed-off-by:
-
- Apr 15, 2021
-
-
Guangqing Zhu authored
Coccinelle noticed: sound/soc/codecs/wcd934x.c:5041:7-32: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Signed-off-by:
Guangqing Zhu <zhuguangqing83@gmail.com> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210415073829.22750-1-zhuguangqing83@gmail.com Signed-off-by:
-
- Apr 14, 2021
-
-
Yang Li authored
Fix the following versioncheck warning: ./sound/soc/codecs/cs35l35.c: 12 linux/version.h not needed. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1618380883-114841-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by:
-
Shengjiu Wang authored
Change function name to ak5558_reset to match devicetree property "reset-gpios". Signed-off-by:
-
Shengjiu Wang authored
Reset (aka power off) happens when the reset gpio is made active. The reset gpio is GPIO_ACTIVE_LOW Fixes: 92088477 ("ASoC: ak5558: Add support for AK5558 ADC driver") Signed-off-by:
-
- Apr 13, 2021
-
-
Christophe JAILLET authored
If 'devm_regmap_init_i2c()' fails, there is no need to goto err. We should return directly as already done by the surrounding error handling paths. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/9fec48e75bc1d3c92626e6f6aca2344bda223379.1618145790.git.christophe.jaillet@wanadoo.fr Signed-off-by:
-
Christophe JAILLET authored
If 'devm_regmap_init_i2c()' fails, there is no need to goto err. We should return directly as already done by the surrounding error handling paths. Signed-off-by:
-
- Apr 09, 2021
-
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20210408062644.802988-1-yebin10@huawei.com Signed-off-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Jack Yu authored
Remove some registers to synchronize with the latest rt1019 datasheet. Signed-off-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
- Apr 08, 2021
-
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
