MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC

CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON.  This
allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC.

Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can
get the same configuration with CAVIUM_OCTEON_SOC.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: spi-devel-general@lists.sourceforge.net
Cc: devel@driverdev.osuosl.org
Cc: linux-usb@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patchwork: https://patchwork.linux-mips.org/patch/5295/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -735,23 +735,8 @@ config WR_PPMC
 	  This enables support for the Wind River MIPS32 4KC PPMC evaluation
 	  board, which is based on GT64120 bridge chip.
 
-config CAVIUM_OCTEON_SIMULATOR
-	bool "Cavium Networks Octeon Simulator"
-	select CEVT_R4K
-	select 64BIT_PHYS_ADDR
-	select DMA_COHERENT
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HOTPLUG_CPU
-	select SYS_HAS_CPU_CAVIUM_OCTEON
-	select HOLES_IN_ZONE
-	help
-	  The Octeon simulator is software performance model of the Cavium
-	  Octeon Processor. It supports simulating Octeon processors on x86
-	  hardware.
-
-config CAVIUM_OCTEON_REFERENCE_BOARD
-	bool "Cavium Networks Octeon reference board"
+config CAVIUM_OCTEON_SOC
+	bool "Cavium Networks Octeon SoC based boards"
 	select CEVT_R4K
 	select 64BIT_PHYS_ADDR
 	select DMA_COHERENT

arch/mips/cavium-octeon/Kconfig

@@ -10,6 +10,10 @@ config CAVIUM_CN63XXP1
 	  non-CN63XXP1 hardware, so it is recommended to select "n"
 	  unless it is known the workarounds are needed.
 
+endif # CPU_CAVIUM_OCTEON
+
+if CAVIUM_OCTEON_SOC
+
 config CAVIUM_OCTEON_2ND_KERNEL
 	bool "Build the kernel to be used as a 2nd kernel on the same chip"
 	default "n"
@@ -103,4 +107,4 @@ config OCTEON_ILM
 	  To compile this driver as a module, choose M here.  The module
 	  will be called octeon-ilm
 
-endif # CPU_CAVIUM_OCTEON
+endif # CAVIUM_OCTEON_SOC

arch/mips/cavium-octeon/Platform

 #
 # Cavium Octeon
 #
-platform-$(CONFIG_CPU_CAVIUM_OCTEON)	+= cavium-octeon/
-cflags-$(CONFIG_CPU_CAVIUM_OCTEON)	+=				\
+platform-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon/
+cflags-$(CONFIG_CAVIUM_OCTEON_SOC)	+=				\
 		-I$(srctree)/arch/mips/include/asm/mach-cavium-octeon
 ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
-load-$(CONFIG_CPU_CAVIUM_OCTEON)	+= 0xffffffff84100000
+load-$(CONFIG_CAVIUM_OCTEON_SOC)	+= 0xffffffff84100000
 else
-load-$(CONFIG_CPU_CAVIUM_OCTEON)	+= 0xffffffff81100000
+load-$(CONFIG_CAVIUM_OCTEON_SOC)	+= 0xffffffff81100000
 endif

arch/mips/configs/cavium_octeon_defconfig

-CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD=y
+CONFIG_CAVIUM_OCTEON_SOC=y
 CONFIG_CAVIUM_CN63XXP1=y
 CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE=2
 CONFIG_SPARSEMEM_MANUAL=y

arch/mips/pci/Makefile

@@ -54,10 +54,10 @@ obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
-obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
+obj-$(CONFIG_CAVIUM_OCTEON_SOC) += pci-octeon.o pcie-octeon.o
 obj-$(CONFIG_CPU_XLR)		+= pci-xlr.o
 obj-$(CONFIG_CPU_XLP)		+= pci-xlp.o
 
 ifdef CONFIG_PCI_MSI
-obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
+obj-$(CONFIG_CAVIUM_OCTEON_SOC) += msi-octeon.o
 endif

drivers/ata/Kconfig

@@ -160,7 +160,7 @@ config PDC_ADMA
 
 config PATA_OCTEON_CF
 	tristate "OCTEON Boot Bus Compact Flash support"
-	depends on CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	help
 	  This option enables a polled compact flash driver for use with
 	  compact flash cards attached to the OCTEON boot bus.

drivers/char/hw_random/Kconfig

@@ -167,7 +167,7 @@ config HW_RANDOM_OMAP
 
 config HW_RANDOM_OCTEON
 	tristate "Octeon Random Number Generator support"
-	depends on HW_RANDOM && CPU_CAVIUM_OCTEON
+	depends on HW_RANDOM && CAVIUM_OCTEON_SOC
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number

drivers/edac/Kconfig

@@ -349,21 +349,21 @@ config EDAC_OCTEON_PC
 
 config EDAC_OCTEON_L2C
 	tristate "Cavium Octeon Secondary Caches (L2C)"
-	depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON
+	depends on EDAC_MM_EDAC && CAVIUM_OCTEON_SOC
 	help
 	  Support for error detection and correction on the
 	  Cavium Octeon family of SOCs.
 
 config EDAC_OCTEON_LMC
 	tristate "Cavium Octeon DRAM Memory Controller (LMC)"
-	depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON
+	depends on EDAC_MM_EDAC && CAVIUM_OCTEON_SOC
 	help
 	  Support for error detection and correction on the
 	  Cavium Octeon family of SOCs.
 
 config EDAC_OCTEON_PCI
 	tristate "Cavium Octeon PCI Controller"
-	depends on EDAC_MM_EDAC && PCI && CPU_CAVIUM_OCTEON
+	depends on EDAC_MM_EDAC && PCI && CAVIUM_OCTEON_SOC
 	help
 	  Support for error detection and correction on the
 	  Cavium Octeon family of SOCs.

drivers/i2c/busses/Kconfig

@@ -726,7 +726,7 @@ config I2C_VERSATILE
 
 config I2C_OCTEON
 	tristate "Cavium OCTEON I2C bus support"
-	depends on CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	help
 	  Say yes if you want to support the I2C serial bus on Cavium
 	  OCTEON SOC.

drivers/net/ethernet/octeon/Kconfig

@@ -4,7 +4,7 @@
 
 config OCTEON_MGMT_ETHERNET
 	tristate "Octeon Management port ethernet driver (CN5XXX, CN6XXX)"
-	depends on  CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	select PHYLIB
 	select MDIO_OCTEON
 	default y

drivers/net/phy/Kconfig

@@ -135,7 +135,7 @@ config MDIO_GPIO
 
 config MDIO_OCTEON
 	tristate "Support for MDIO buses on Octeon SOCs"
-	depends on  CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	default y
 	help
 

drivers/spi/Kconfig

@@ -266,7 +266,7 @@ config SPI_OC_TINY
 
 config SPI_OCTEON
 	tristate "Cavium OCTEON SPI controller"
-	depends on CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	help
 	  SPI host driver for the hardware found on some Cavium OCTEON
 	  SOCs.

drivers/staging/octeon/Kconfig

 config OCTEON_ETHERNET
 	tristate "Cavium Networks Octeon Ethernet support"
-	depends on CPU_CAVIUM_OCTEON && NETDEVICES
+	depends on CAVIUM_OCTEON_SOC && NETDEVICES
 	select PHYLIB
 	select MDIO_OCTEON
 	help

drivers/usb/host/Kconfig

@@ -285,7 +285,7 @@ config USB_EHCI_HCD_PLATFORM
 
 config USB_OCTEON_EHCI
 	bool "Octeon on-chip EHCI support"
-	depends on CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	default n
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	help
@@ -480,7 +480,7 @@ config USB_OHCI_HCD_PLATFORM
 
 config USB_OCTEON_OHCI
 	bool "Octeon on-chip OHCI support"
-	depends on CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	default USB_OCTEON_EHCI
 	select USB_OHCI_BIG_ENDIAN_MMIO
 	select USB_OHCI_LITTLE_ENDIAN

drivers/watchdog/Kconfig

@@ -1072,7 +1072,7 @@ config TXX9_WDT
 
 config OCTEON_WDT
 	tristate "Cavium OCTEON SOC family Watchdog Timer"
-	depends on CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	default y
 	select EXPORT_UASM if OCTEON_WDT = m
 	help