Integrate meta-seco-imx/linux-seco-imx/add_new_mv_overlays (!591) · Merge requests · Clea OS / seco-manifest

GitBot requested to merge integrate/meta-seco-imx/linux-seco-imx/add_new_mv_overlays/into/kirkstone into kirkstone Dec 11, 2024

Commit: clea-os/layers/seco/meta-seco-imx@b720cb70

Integrate linux-seco-imx/add_new_mv_overlays

Commit: clea-os/bsp/nxp/linux-seco-imx@9a707942

[D18][DTBO] Add overlay for 15.6-inch display

Commit: clea-os/bsp/nxp/linux-seco-imx@c37aa234

[D18][DTBO] Adapt VIDEO_PLL1 rate in 10.1" display devicetree overlay

To get a pixel clock close to the requested 71.1Mhz, the VIDEO_PLL1's rate is requested to be 14 times the pixel clock. Here the assigned-clock and assigned-clock-rate is used. This is not completly correct, as according to the documentation, this should only by used, when a clock only drives one child, but NXP already uses this, for the PLLs. This leads to a reconfiguration during boot, as first the settings from the CCM are used and later, when the panel is probed, the new setting is applied, which is OK (needs recheck if it comes to multiple displays, though).

[MODV-102]

Commit: clea-os/bsp/nxp/linux-seco-imx@3a7d3ecc

[D18][DTBO] Add resolution to 10.1-inch display overlay name

MODV-75

Commit: clea-os/bsp/nxp/linux-seco-imx@87dc73af

[D18][DTBO] Add overlay for FN0700D101A 7-inch display

This adds the official Fannal FN0700D101A 7-inch display for Modular Vision with the SOM-SMARC-MX8M-Plus.

MODV-75

Commit: clea-os/bsp/nxp/linux-seco-imx@a0a0afb0

[D18][DTBO] Add overlay for QX-070WSVGA 7-inch display

Add overlay QX-070WSVGA for the 7-inch variant of Modular Vision with D18.

MODV-75