Integrate meta-seco-mtk/oleksii/e58_revb
Commit: clea-os/layers/seco/meta-seco-mtk@6d24f22a
[LAYER] Add wic image dependencies from meta-rity
--
Commit: clea-os/layers/seco/meta-seco-mtk@44f2a05d
[DTO][NON-FUNC] Adjust the copyright headers
--
Commit: clea-os/layers/seco/meta-seco-mtk@7876da5f
[KERNEL] Add summary and description to match other SECO platforms
--
Commit: clea-os/layers/seco/meta-seco-mtk@675a8b3e
[E58][DTO] Add G101EAN02 10.1-inch display
--
Commit: clea-os/layers/seco/meta-seco-mtk@f0fb54e1
[OPTEE] Add config for large RAM sizes
--
Commit: clea-os/layers/seco/meta-seco-mtk@a610a9ba
[UBOOT] Make u-boot compatible with any genio510/700 machine
--
Commit: clea-os/layers/seco/meta-seco-mtk@4a1f1ff6
[CONFIG] Update cfg files to release v24.0
--
Commit: clea-os/layers/seco/meta-seco-mtk@835398b9
[E58][CONF] Fix missing override for Genio510
--
Commit: clea-os/layers/seco/meta-seco-mtk@be5fc47d
[DTO][E58] Add 16 Gb RAM overlays
--
Commit: clea-os/layers/seco/meta-seco-mtk@37c0bf78
[TOOLS] Assign fitImage to bootfs partitions
These are used in things image. This way genio-flash can update the kernel bundle inside those partitions
--
Commit: clea-os/layers/seco/meta-seco-mtk@f86b27b8
[DTO][B79] Add an overlay to disable SER2
--
Commit: clea-os/layers/seco/meta-seco-mtk@05765937
[DTO][B79] Adjust eeprom config in CSM B79
--
Commit: clea-os/layers/seco/meta-seco-mtk@b980c35f
[CONFIG] Add RV-3028 to defconfig
--
Commit: clea-os/layers/seco/meta-seco-mtk@edfdd716
[LAYER][E58] Rework the config files
Use seco-base include similar to what imx layer has. Use processor and common files from Mediatek's meta-layer, only override in SECO layer what's needed.
--
Commit: clea-os/layers/seco/meta-seco-mtk@6cdd102f
[E58] Use MT7921 include from meta-layer rather than separate definition
This way we just stick to includes from manufacturer's meta layers
--
Commit: clea-os/layers/seco/meta-seco-mtk@5c02217b
[DTO][B79] Disable postcode by default
Disable by default, as it gets attached as /dev/fb0 and breaks the splash screen on any display when using this carrier board
--
Commit: clea-os/layers/seco/meta-seco-mtk@68e89bab
[DTO] Add overlay with PCIe fix for RevB
B79:
- SW14 both switches should be off
- CN78 should be set to v2.1 spec
--
Commit: clea-os/layers/seco/meta-seco-mtk@a27f2c4b
[CONF] Rename kernel device tree and u-boot defconfigs
to match SECO naming convention
--
Commit: clea-os/layers/seco/meta-seco-mtk@073153b5
Revert "[MEDIATEK] Disable u-boot-tool package"
This reverts commit 916b74dd2864f4b5d50e793c36d14bd7243675a0.
The reason for removing was fixed in the meta-layer.
--
Commit: clea-os/layers/seco/meta-seco-mtk@46e51237
[DTO][E58] Move SMARC_GPIO6 pin from STM32 to Processor
GPIO6 is connected to both STM32 and Processor. It is used as a touch interrupt on Mpdular Vision, so it was decided to be controlled by the processor for better reliability and response
--
Commit: clea-os/layers/seco/meta-seco-mtk@9e072166
[DTO][E58] Adjust MV and displays overlays for REV B1
--
Commit: clea-os/layers/seco/meta-seco-mtk@bdb5a3e0
[DTO][B79] Adjust USB2_EN_OC configuration
Feflect the hardware fixes regarding the USB enable signals
--
Commit: clea-os/layers/seco/meta-seco-mtk@d45b9044
[GENIO] Enable overlays from straps
Reflects the changes in u-boot. No need to do this operation in boot.script anymore.
--
Commit: clea-os/layers/seco/meta-seco-mtk@7be4d980
[GENIO] Enable VCN33_1 and VCN18 voltages in bl2
I2C lines from Embedded Controller to GPIO Expander with straps go through the level shifter. The lever shifter depends on _RUN volatages, those need to be enabled when u-boot is starting
--
Commit: clea-os/layers/seco/meta-seco-mtk@b161e0c4
[GENIO] Enable in-kernel STM32 driver
--
Commit: clea-os/layers/seco/meta-seco-mtk@31ff4845
[GENIO] Remove out-of-tree STM32 driver recipe
Remove the driver, built from external repo. Instead, place the sources into the linux-seco-mtk kernel