Integrate meta-seco-imx/linux-seco-imx/seco_lf-5.10.y-d18_usb_drd

Commit: clea-os/layers/seco/meta-seco-imx@4fcd933e

Integrate linux-seco-imx/seco_lf-5.10.y-d18_usb_drd

--

Commit: clea-os/bsp/nxp/linux-seco-imx@985e047f

[D18] usb1: add USB DRD support

Add USB DRD support on SoC USB1 interface. Host/Device detection is done by ID pin via usb-role-switch connector.

DRD mode is a reduced functionality OTG mode: in DRD operation, the controller mode (Host/Device) is decided based on the ID pin status. With the ID pin at ground the mode is Host and otherwise it is Device: once a cable plug is attached the controller selects the state and doesn't change it until the cable is unplugged.

• Test details: root@seco-imx8mp-d18:# cat /sys/kernel/debug/usb/38100000.dwc3/mode device root@seco-imx8mp-d18:# cat /sys/kernel/debug/gpio | grep -i USB gpio-10 (USB1_ID_GPIO |id ) in hi IRQ gpio-12 (USB0_EN_OC#1V8_OUT|regulator-usb1-vbus ) out lo gpio-99 (USB0_VBUS_GPIO ) gpio-115 (USB0_EN_OC_1V8_IN ) root@seco-imx8mp-d18:# modprobe g_mass_storage iSerialNumber=123456 file=/dev/m mcblk1p1 stall=0 removable=1 [ 145.847608] Mass Storage Function, version: 2009/09/11 [ 145.852770] LUN: removable file: (no medium) [ 145.857153] LUN: removable file: /dev/mmcblk1p1 [ 145.861712] Number of LUNs=1 [ 145.865014] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11 [ 145.872023] g_mass_storage gadget: g_mass_storage ready root@seco-imx8mp-d18:# rmmod g_mass_storage [ 249.908302] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 249.913850] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 249.921877] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x0000002001810010 [ 249.931326] xhci-hcd xhci-hcd.1.auto: irq 74, io mem 0x38100000 [ 249.938065] hub 3-0:1.0: USB hub found [ 249.941879] hub 3-0:1.0: 1 port detected [ 249.946085] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 249.951631] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 249.959332] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 249.965925] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 249.974484] hub 4-0:1.0: USB hub found [ 249.978275] hub 4-0:1.0: 1 port detected [ 250.203790] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 250.359989] usb-storage 3-1:1.0: USB Mass Storage device detected [ 250.367004] scsi host0: usb-storage 3-1:1.0 [ 251.393355] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.27 PQ: 0 ANSI: 6 [ 251.407656] sd 0:0:0:0: [sda] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 251.416645] sd 0:0:0:0: [sda] Write Protect is off [ 251.421734] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 251.457705] sda: sda1 [ 251.463757] sd 0:0:0:0: [sda] Attached SCSI removable disk root@seco-imx8mp-d18:# cat /sys/kernel/debug/usb/38100000.dwc3/mode host root@seco-imx8mp-d18:# cat /sys/kernel/debug/gpio | grep -i USB gpio-10 (USB1_ID_GPIO |id ) in lo IRQ gpio-12 (USB0_EN_OC#1V8_OUT|regulator-usb1-vbus ) out hi gpio-99 (USB0_VBUS_GPIO ) gpio-115 (USB0_EN_OC_1V8_IN ) [ 311.938370] usb 3-1: USB disconnect, device number 2 [ 311.959608] xhci-hcd xhci-hcd.1.auto: remove, state 4 [ 311.964718] usb usb4: USB disconnect, device number 1 [ 311.970368] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 311.976158] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 311.981472] usb usb3: USB disconnect, device number 1 [ 312.030136] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered root@seco-imx8mp-d18:# cat /sys/kernel/debug/usb/38100000.dwc3/mode device root@seco-imx8mp-d18:# cat /sys/kernel/debug/gpio | grep -i USB gpio-10 (USB1_ID_GPIO |id ) in hi IRQ gpio-12 (USB0_EN_OC#1V8_OUT|regulator-usb1-vbus ) out lo gpio-99 (USB0_VBUS_GPIO ) gpio-115 (USB0_EN_OC_1V8_IN )