Integrate u-boot-seco-imx/seco_lf_v2024.04_6.6.52_2.2.x-e39-e83-add-devicetree-entries-for-seco-config

Commit: clea-os/bsp/nxp/u-boot-seco-imx@2d288996

[E39][ENV] seco_config: Add display overlay option for 10" Fannal WXGA Display

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@93291750

[E39][ENV] seco_config: Add display overlay option for 7" Fannal WSVGA Display

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@9c208e3d

[E39][E83][ENV] seco_config: Add carrier overlay option for Modular Vision carrier board

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@2377527a

[LIB][EEPROM] Interpret the data for PANEL_ID and TOUCH_ID as plain values

They used to be encoded as ascii.

(cherry picked from commit 17226ad8df38f2d4e2844916aae89eb67784df8c)

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@638937f6

[E39] add debug serial configuration support

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@70596f5e

[E39][DT] Add proper clocks to all uarts to make them usable

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@c51dc5ee

[E39] Add EEPROM bus and address to i.MX93 header

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@c1c05eaf

[E39][BOARD] fixup straps definition

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@c46ee2dd

[E39][BOARD] Add auto application of MxL86110 overlay as custom overlays

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@05d13a19

[E39][CONFIG] Enable SECO_FDT_OVERLAY command in defconfig

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@65783406

[E39][BOARD] Add Ethernet PHY type to strap_cfg

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@4eedec7d

[E39][BOARD] Implement EEPROM MAC address setup

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@fe59c271

[iMX93][E39] Add E39 to Kconfig

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@4ea9e42a

[E39][CONFIG] Enable EEPROM manager in defconfig

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@42b8373e

[E39][BOARD] Add straps management

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@9271d85d

[E39][BOARD] cache and return seco_code in stm32_seco_code function

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@82addb83

[i.MX8M][i.MX9] imx_tmu: use trip temps based on temp grade

As Linux thermal trips for the i.MX{8M,9} are fixed up by fixup_thermal_trips to the temp grade read from fuses, adopt the same behavior for U-Boot.

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@4cce1b76

[i.MX9] imx9: fix critical thermal threshold

REFERENCE: https://github.com/u-boot/u-boot/commit/e6c3c63035c7ed58e6d6a95525d4f297c14e139c

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@98dbd994

[E39][ENV] add peripheral: OV5640 CSI camera overlay option

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@1537d26f

[E39][ENV] set E78 daughter as carrier option E77+E78

Carrier boards could have a chain of daughter boards, and multiple carriers could use the same daughters, so as the amount of combination could blow up, support of daughter sub-options was added. But as of now, we have only one carrier that has only one daughter board, so this currently is an unnecessary step: add back the daughter section when more sub-options start to exist.

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@e9c93fc9

[E39][DEFCONFIG] enable eth0

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@b00976aa

[E39][DT] add default pinctrl property to usbotg nodes

Silence the following UMS error message: MX SECO U-Boot > ums 0 mmc 0 UMS: LUN 0, dev mmc 0, hwpart 0, sector 0x0, count 0x3a3e000 Failed to configure default pinctrl

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@b2e97b33

[E39][DT] fix usb configuration

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@3631e4ae

[E39][BOARD] setup STM32 GPIOs

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@732d6212

[E39][BOARD] add STM32 functions

REFERENCE: seco-ne/3rd-party/kuk/uboot-imx-kuk@e97c568e

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@a9d2f99a

[E39] clear reference board leftovers

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@044a9ea1

[E39][ENV] add carrier overlay options

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@8a877e68

[E39][DT] set device model and compatible

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@8d9b0058

[E39][BOARD][DEFCONFIG] add SECO environment

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@2b28f8f6

[i.MX9][ENV] add SECO environment management

As the i.MX9 SoC seems to be compatible with the i.MX8 SoC environment management, reuse it.

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@80788203

[E39] Use proper include-guard and remove some unused variables

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@1d860aa4

[E39] Perform system reset/poweroff by command in the environment

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@2abb65e3

[DRIVER] Add driver for system reset/poweroff by environment commands

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@b40250d1

[i.MX93][E39] Add boardfiles as copy of imx93-evk

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@f1937411

[E39] Remove non-existing hardware

Move PMIC to correct i2c-bus, use Philips PCF8563 rtc.

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@bab33fb6

[E39] Add uart2, uart3, uart5, uart6 and i2c5

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@0f25ecaa

[E39] Add device tree and defconfig as copy of imx93-evk