Integrate u-boot-seco-imx/seco_lf_v2024.04_e88-dev

Commit: clea-os/bsp/nxp/u-boot-seco-imx@ea40c111

[E88][ENV] add HDMI + LVDS FHD video overlay option

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@b2d38343

[E88][DT] add ethernet support: eth0, eth1

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@89a22617

[E88][DT][DEFCONFIG] enable usb

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@cc27eb3f

[E88][DT] add GPIO expander support

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@7e2101fc

[E88][BOARD][DEFCONFIG] add SECO environment

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@c2c82051

[E88][DT][BOARD] clear reference board and overlay peripherals

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@f48f2ff0

[i.MX95][E88] init from NXP imx95-19x19-evk

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@4633ee5d

[E39][BOARD] fixup straps definition

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@b4f5fdc4

[E39][BOARD] Add auto application of MxL86110 overlay as custom overlays

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@1cb3f602

[E39][CONFIG] Enable SECO_FDT_OVERLAY command in defconfig

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@1a429296

[E39][BOARD] Add Ethernet PHY type to strap_cfg

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@968b81ac

[E39][BOARD] Implement EEPROM MAC address setup

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@09ab58b8

[iMX93][E39] Add E39 to Kconfig

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@76a95541

[E39][CONFIG] Enable EEPROM manager in defconfig

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@9e3050c6

[E39][BOARD] Add straps management

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@3c59ba53

[E39][BOARD] cache and return seco_code in stm32_seco_code function

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@7a7726c2

[i.MX8M][i.MX9] imx_tmu: use trip temps based on temp grade

As Linux thermal trips for the i.MX{8M,9} are fixed up by fixup_thermal_trips to the temp grade read from fuses, adopt the same behavior for U-Boot.

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@d28312eb

[i.MX9] imx9: fix critical thermal threshold

REFERENCE: https://github.com/u-boot/u-boot/commit/e6c3c63035c7ed58e6d6a95525d4f297c14e139c

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@beda6a14

[E39][ENV] add peripheral: OV5640 CSI camera overlay option

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@ff8349bf

[E39][ENV] set E78 daughter as carrier option E77+E78

Carrier boards could have a chain of daughter boards, and multiple carriers could use the same daughters, so as the amount of combination could blow up, support of daughter sub-options was added. But as of now, we have only one carrier that has only one daughter board, so this currently is an unnecessary step: add back the daughter section when more sub-options start to exist.

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@f024460c

[E39][DEFCONFIG] enable eth0

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@2afe0117

[E39][DT] add default pinctrl property to usbotg nodes

Silence the following UMS error message: MX SECO U-Boot > ums 0 mmc 0 UMS: LUN 0, dev mmc 0, hwpart 0, sector 0x0, count 0x3a3e000 Failed to configure default pinctrl

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@4f049711

[E39][DT] fix usb configuration

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@6e6d4ced

[E39][BOARD] setup STM32 GPIOs

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@3a60e148

[E39][BOARD] add STM32 functions

REFERENCE: seco-ne/3rd-party/kuk/uboot-imx-kuk@e97c568e

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@df511598

[E39] clear reference board leftovers

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@c5a216bc

[E39][ENV] add carrier overlay options

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@e327498d

[E39][DT] set device model and compatible

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@c6b29b2c

[E39][BOARD][DEFCONFIG] add SECO environment

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@a6ddb571

[i.MX9][ENV] add SECO environment management

As the i.MX9 SoC seems to be compatible with the i.MX8 SoC environment management, reuse it.

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@38c5c142

[E39] Use proper include-guard and remove some unused variables

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@e7a536d6

[E39] Perform system reset/poweroff by command in the environment

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@99ee42a5

[DRIVER] Add driver for system reset/poweroff by environment commands

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@f30d38b4

[i.MX93][E39] Add boardfiles as copy of imx93-evk

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@c6dda1c2

[E39] Remove non-existing hardware

Move PMIC to correct i2c-bus, use Philips PCF8563 rtc.

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@1090a4e6

[E39] Add uart2, uart3, uart5, uart6 and i2c5

--

Commit: clea-os/bsp/nxp/u-boot-seco-imx@db7798d2

[E39] Add device tree and defconfig as copy of imx93-evk