BACKPORT: FROMLIST: arm64: dts: qcom: qcs9100: Update memory map  for QCS9100 Ride and QCS9100 Ride Rev3

This patch series is based on Tengfei Fan's patches [1] which adds support
for QCS9100 Ride and QCS9100 Ride Rev3 boards.

Some new carveouts (viz. gunyah_md and a few pil carveouts) have been
introduced and the size and base addresses have been updated for
a few of existing carveouts compared to SA8775P. Also, tz_ffi_mem carveout
and its corresponding scm reference has been removed as it is not required
for these boards. Incorporate these changes in the updated memory map
boards.

[1] https://lore.kernel.org/all/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com/.

Change-Id: I6ff50376710bb906e8a58940a10f6ef29274852d
Link: https://lore.kernel.org/all/20241119092501.31111-1-quic_pbrahma@quicinc.com/


Patch-mainline: linux-arm-msm @ 19/11/2024, 14:55
[ quic_pbrahma@quicinc.com: Removed tz_ffi_mem reference. ]
Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com>

1.Add emc2305_detect function to handle device detection.
2.Registered EMC2303 I2C devices.

Change-Id: I24d129744c6de397aa29a482bae16bcedf6e4269
Signed-off-by: Yanhong Wu <quic_yanhwu@quicinc.com>

This change updates power-domain for display controller for qcs8300
and sa775p target.

Change-Id: I1c5dac0a2be60919231a02f9588af9c37fd5d10d
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>

There is a video hung issue when GDSC is kept in hardware control mode. This is a workaround to keep the GDSC in software mode till the hung is rootcaused and fix.

Change-Id: I0ff09be40abd9bc7a6943ed188060b7794fd51cb
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>

Add dapm widgets and routes to adapt for QCS9075 RB8 board.
Also, select MAX98375 and DMIC codec drivers for this board.

Change-Id: Ife562bd4d85aa77cf484b668e64661030355a3de
Signed-off-by: Saurav Kumar <quic_sauravk@quicinc.com>

Add audio changes to adapt for qcs9075 RB8 board.

Change-Id: I01d64178b559f8dcdfef155be71a97e58ad0db17
Signed-off-by: Saurav Kumar <quic_sauravk@quicinc.com>
Signed-off-by: Sairamreddy Bojja <quic_sbojja@quicinc.com>

Declare the displayport controller present on the Qualcomm QCS9075 RB8
SoC and connect to edp PHY.

Change-Id: I96bce22b03eac5d198a18c1d0ccc9875c142e58f
Signed-off-by: Sai Srujana Oruganti <quic_osaisruj@quicinc.com>

Add UFS support for qcs9075 rb8 board.

Change-Id: I1545082ef73a83d321cf4a669697dcf080000d03
Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>

Enable primary controller usb0 in drd mode, usb1 and micro usb2 in
host mode.

Change-Id: Ic298074c8cc14a5b5fdad2283ff6e0cb19d8ba00
Signed-off-by: Akash Kumar <quic_akakum@quicinc.com>

Add a property to SE node that indicates whether
the firmware should be loaded from Linux, along with the
transfer mode details.

Change-Id: I8e5332b7c31f4ab82ef3f044fd283ad4ddda52e6
Signed-off-by: Mehul Raninga <quic_mraninga@quicinc.com>

Change-Id: Ic866ccf81089ce89e2e89a4f6626ed2b24d13873

This reverts commit 2fe8ecbe.

Signed-off-by: Linux Build Service Account <lnxbuild@localhost>
Change-Id: I2834cb4aac3b3f4abbaecbc4c817f76da12d4617

ICE is a part of storage platform device,
there is no necessity for a separate ICE probe.
Storage probe will check for the ice node and enable
crypto capabilities. Having ICE probe will cause crash
for targets with both eMMC and UFS support since probe
will be called for both ICE nodes irrespective of device
boot type.

Change-Id: Ib403f226942557dd00e3fbda06b6a11467720177
Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>

Add ICE node in eMMC device tree node to enable inline
encryption support.

Change-Id: Ie0e4c59d6fa6e4a90fca0d57dd6f8e7614692736
Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>

This reverts commit e1277958.

Reason for revert: Camera broke on tip.

Change-Id: I1e9eb500403b183a6dd5a256289e4e16e1167a47
Signed-off-by: Salendarsingh Gaud <quic_sgaud@quicinc.com>

Avoid channel reference put incase of invalid channel context
and also while creating remote rpmsg ept.

Change-Id: I2311e24fa9ba76c3c0994a1724c10921fbe628a1
Signed-off-by: Sudeepgoud Patil <quic_sudeepgo@quicinc.com>

Without the prefix, the function name would appear as
"/sys/kernel/config/functions/{sdx55/sm8450}". This will be a problem if
multiple functions are supported for this endpoint device.

So let's add the "pci_epf_mhi_" prefix to identify _this_ function
uniquely. Even though it is an ABI breakage, this driver is not used
anywhere outside Qcom and myself to my knowledge. So it safe to change
the function name.

Change-Id: I3eb106863fd2acda40064d239b34715284ae8dda
Link: https://lore.kernel.org/r/1701432377-16899-4-git-send-email-quic_msarkar@quicinc.com


Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Git-commit: 2e00fd54
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git


Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>

This reverts commit 3748c354.

Reason for revert: Camera functionality is broken on QCLINUX.

Change-Id: I7120c3032f5e6d8d759b9912b872b1eb2cfc90f7
Signed-off-by: Salendarsingh Gaud <quic_sgaud@quicinc.com>

Certain commits previously changed the dr_mode from host to
"otg" as a mistake during backporting and trying to enable
EUD. Fix them up and mark all non-primary ports as host only
supported.

Fixes: 17bccce5 ("PENDING: arm64: dts: qcom: sa8775p: Add EUD dt node")
Change-Id: I16b93225ff1f277003f38d2eaa349d64e227e7bb
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>