dt-bindings: Fix typos

Fix typos in Documentation/devicetree/bindings.  The changes are in
descriptions or comments where they shouldn't affect functionality.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org


Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/arm/fsl.yaml

@@ -1222,9 +1222,9 @@ properties:
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
-          For the Vybrid SoC familiy all variants with DDR controller are supported,
+          For the Vybrid SoC family all variants with DDR controller are supported,
           which is the VF5xx and VF6xx series. Out of historical reasons, in most
-          places the kernel uses vf610 to refer to the whole familiy.
+          places the kernel uses vf610 to refer to the whole family.
           The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
           core support.
         items:

Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt

@@ -21,13 +21,13 @@ The Device Tree node representing this System Controller 0 provides a
 number of clocks:
 
  - a set of core clocks
- - a set of gatable clocks
+ - a set of gateable clocks
 
 Those clocks can be referenced by other Device Tree nodes using two
 cells:
  - The first cell must be 0 or 1. 0 for the core clocks and 1 for the
-   gatable clocks.
- - The second cell identifies the particular core clock or gatable
+   gateable clocks.
+ - The second cell identifies the particular core clock or gateable
    clocks.
 
 The following clocks are available:
@@ -38,7 +38,7 @@ The following clocks are available:
    - 0 3	Core
    - 0 4	NAND core
    - 0 5	SDIO core
- - Gatable clocks
+ - Gateable clocks
    - 1 0	Audio
    - 1 1	Comm Unit
    - 1 2	NAND

Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt

@@ -16,7 +16,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h.
 
 The mipi0a controller also uses the common power domain from
 Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
-The available power doamins are defined in dt-bindings/power/mt*-power.h.
+The available power domains are defined in dt-bindings/power/mt*-power.h.
 
 Example:
 

Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt

@@ -15,7 +15,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h.
 
 The vcodecsys controller also uses the common power domain from
 Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
-The available power doamins are defined in dt-bindings/power/mt*-power.h.
+The available power domains are defined in dt-bindings/power/mt*-power.h.
 
 Example:
 

Documentation/devicetree/bindings/arm/sunxi.yaml

@@ -541,13 +541,13 @@ properties:
           - const: msi,primo81
           - const: allwinner,sun6i-a31s
 
-      - description: Emlid Neutis N5 Developper Board
+      - description: Emlid Neutis N5 Developer Board
         items:
           - const: emlid,neutis-n5-devboard
           - const: emlid,neutis-n5
           - const: allwinner,sun50i-h5
 
-      - description: Emlid Neutis N5H3 Developper Board
+      - description: Emlid Neutis N5H3 Developer Board
         items:
           - const: emlid,neutis-n5h3-devboard
           - const: emlid,neutis-n5h3

Documentation/devicetree/bindings/ata/pata-common.yaml

@@ -12,7 +12,7 @@ maintainers:
 description: |
   This document defines device tree properties common to most Parallel
   ATA (PATA, also known as IDE) AT attachment storage devices.
-  It doesn't constitue a device tree binding specification by itself but is
+  It doesn't constitute a device tree binding specification by itself but is
   meant to be referenced by device tree bindings.
 
   The PATA (IDE) controller-specific device tree bindings are responsible for

Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml

@@ -43,7 +43,7 @@ properties:
   brcm,gisb-arb-master-names:
     $ref: /schemas/types.yaml#/definitions/string-array
     description: >
-      String list of the litteral name of the GISB masters. Should match the
+      String list of the literal name of the GISB masters. Should match the
       number of bits set in brcm,gisb-master-mask and the order in which they
       appear from MSB to LSB.
 

Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml

@@ -7,10 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NVIDIA Tegra ACONNECT Bus
 
 description: |
-  The Tegra ACONNECT bus is an AXI switch which is used to connnect various
+  The Tegra ACONNECT bus is an AXI switch which is used to connect various
   components inside the Audio Processing Engine (APE). All CPU accesses to
   the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All
-  devices accessed via the ACONNNECT are described by child-nodes.
+  devices accessed via the ACONNECT are described by child-nodes.
 
 maintainers:
   - Jon Hunter <jonathanh@nvidia.com>

Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Gatable Oscillator Clock
+title: Allwinner A10 Gateable Oscillator Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>

Documentation/devicetree/bindings/clock/alphascale,acc.txt

 Alphascale Clock Controller
 
-The ACC (Alphascale Clock Controller) is responsible of choising proper
-clock source, setting deviders and clock gates.
+The ACC (Alphascale Clock Controller) is responsible for choosing proper
+clock source, setting dividers and clock gates.
 
 Required properties for the ACC node:
  - compatible: must be "alphascale,asm9260-clock-controller"

Documentation/devicetree/bindings/clock/keystone-pll.txt

@@ -14,7 +14,7 @@ Required properties:
 - #clock-cells : from common clock binding; shall be set to 0.
 - compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
 - clocks : parent clock phandle
-- reg - pll control0 and pll multipler registers
+- reg - pll control0 and pll multiplier registers
 - reg-names : control, multiplier and post-divider. The multiplier and
 		post-divider registers are applicable only for main pll clock
 - fixed-postdiv : fixed post divider value. If absent, use clkod register bits

Documentation/devicetree/bindings/clock/lpc1850-ccu.txt

@@ -68,7 +68,7 @@ soc {
 			      "base_ssp0_clk",  "base_sdio_clk";
 	};
 
-	/* A user of CCU brach clocks */
+	/* A user of CCU branch clocks */
 	uart1: serial@40082000 {
 		...
 		clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;

Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt

@@ -5,8 +5,8 @@ control registers for two low speed clocks. One of the clocks is a
 32 kHz oscillator driver with power up/down and clock gating. Next
 is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
 
-These clocks are used by the RTC and the Event Router peripherials.
-The 32 kHz can also be routed to other peripherials to enable low
+These clocks are used by the RTC and the Event Router peripherals.
+The 32 kHz can also be routed to other peripherals to enable low
 power modes.
 
 This binding uses the common clock binding:

Documentation/devicetree/bindings/clock/maxim,max9485.txt

@@ -12,7 +12,7 @@ requests.
 
 Required properties:
 - compatible:	"maxim,max9485"
-- clocks:	Input clock, must provice 27.000 MHz
+- clocks:	Input clock, must provide 27.000 MHz
 - clock-names:	Must be set to "xclk"
 - #clock-cells: From common clock binding; shall be set to 1
 

Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml

@@ -25,7 +25,7 @@ properties:
       - description: Sleep clock source
       - description: PCIE 0 Pipe clock source (Optional clock)
       - description: PCIE 1 Pipe clock source (Optional clock)
-      - description: PCIE 1 Phy Auxillary clock source (Optional clock)
+      - description: PCIE 1 Phy Auxiliary clock source (Optional clock)
       - description: UFS Phy Rx symbol 0 clock source (Optional clock)
       - description: UFS Phy Rx symbol 1 clock source (Optional clock)
       - description: UFS Phy Tx symbol 0 clock source (Optional clock)

Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml

@@ -14,7 +14,7 @@ description:
   There is one ACC register region per CPU within the KPSS remapped region as
   well as an alias register region that remaps accesses to the ACC associated
   with the CPU accessing the region. ACC v1 is currently used as a
-  clock-controller for enabling the cpu and hanling the aux clocks.
+  clock-controller for enabling the cpu and handling the aux clocks.
 
 properties:
   compatible:

Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml

@@ -66,7 +66,7 @@ then:
 else:
   description: |
     Other SC9863a clock nodes should be the child of a syscon node in
-    which compatible string shoule be:
+    which compatible string should be:
             "sprd,sc9863a-glbregs", "syscon", "simple-mfd"
 
     The 'reg' property for the clock node is also required if there is a sub

Documentation/devicetree/bindings/clock/ti/mux.txt

@@ -8,7 +8,7 @@ parents, one of which can be selected as output.  This clock does not
 gate or adjust the parent rate via a divider or multiplier.
 
 By default the "clocks" property lists the parents in the same order
-as they are programmed into the regster.  E.g:
+as they are programmed into the register.  E.g:
 
 	clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
 

Documentation/devicetree/bindings/clock/vf610-clock.txt

@@ -9,7 +9,7 @@ Optional properties:
 - clocks: list of clock identifiers which are external input clocks to the
 	given clock controller. Please refer the next section to find
 	the input clocks for a given controller.
-- clock-names: list of names of clocks which are exteral input clocks to the
+- clock-names: list of names of clocks which are external input clocks to the
 	given clock controller.
 
 Input clocks for top clock controller:

Documentation/devicetree/bindings/connector/usb-connector.yaml

@@ -227,7 +227,7 @@ properties:
       state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification
       Revision 3.0, Version 1.2. When the property is set, the port requests pSnkStby(2.5W -
       5V@500mA) upon entering SNK_DISCOVERY(instead of 3A or the 1.5A, Rp current advertised, during
-      SNK_DISCOVERY) and the actual currrent limit after reception of PS_Ready for PD link or during
+      SNK_DISCOVERY) and the actual current limit after reception of PS_Ready for PD link or during
       SNK_READY for non-pd link.
     type: boolean