This enables CONFIG_FSL_RCPM

Signed-off-by: Biwen Li <biwen.li@nxp.com>

This enables CONFIG_RTC_DRV_FSL_FTM_ALARM

Signed-off-by: Biwen Li <biwen.li@nxp.com>

pcie can't compile now.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

We reverted this patch "drm/tegra: Move drm_dp_link helpers to Tegra DRM" which
is incompatible with current tegra drm drivers.
Have to disable it, otherwise will meet below build break.

../drivers/gpu/drm/tegra/sor.c: In function ‘tegra_sor_filter_rates’:
../drivers/gpu/drm/tegra/sor.c:625:24: error: ‘struct drm_dp_link’ has no member named ‘num_rates’; did you mean ‘num_lanes’?
625 |  for (i = 0; i < link->num_rates; i++) {
  |                        ^~~~~~~~~
  |                        num_lanes
../drivers/gpu/drm/tegra/sor.c:626:17: error: ‘struct drm_dp_link’ has no member named ‘rates’; did you mean ‘rate’?
626 |   switch (link->rates[i]) {

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

enable weim nor by adding CONFIG_MTD_PHYSMAP and CONFIG_MTD_PHYSMAP_OF
in imx_v6_v7_defconfig

Signed-off-by: Han Xu <han.xu@nxp.com>

add vadc to imx_v6_v7_defconfig

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>

Enable FB_MXC_OVERLAY config by default for the lcdif
driver on legacy i.MX6 and i.MX7 platforms.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>

SM test driver was changed to build only as a module.
Update defconfig accordingly.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Leonard Crestez <leonard.crestez@nxp.com>

Enable CONFIG_PREEMPT instead of CONFIG_PREEMPT_VOLUNTARY, the former
is much suitable for embed system as i.mx. Besides, that aligns with
internal legacy imx_v7_defconfig.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Anson Huang <anson.huang@nxp.com>

IMX bluetooth support interface is HCI UART. Remove HCI SDIO
interface since there have HIF conflict for cypress bluetooth.

Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>

enable adv7180 as module

Signed-off-by: Robby Cai <robby.cai@nxp.com>

Enable the following:
-CAAM SNVS and SM drivers
-generic SW crypto algorithms - needed for tcrypt speed tests
-CRYPTO_USER - needed for configuring crypto algorithms
from user space (using tools like crconf)

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>

Add spi slave support for imx6/7 platforms.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>

This is needed for VPU/MM/GPU features.
Generated by savedefconfig.

NOTE: the exist CONFIG_CMA_SIZE_MBYTES=320 option actually did not work
before due to missing CONFIG_DMA_CMA, removed it first.

Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

There are many non-NXP modules which are endabled in defconfig by
default. Actually we can remove these unused modules in kernel
lsdk.config for LSDK to reduce the size of lib/modules.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>

Move crypto options from ARMv8-specific config fragment to lsdk.config
(which is used both by ARMv7 and ARMv8) - since they are needed for both
SoCs.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>

Enables the CONFIG_ARM_MODULES_PLTS by default for LSDK to allow modules
to be allocated in the vmalloc area.

Signed-off-by: Li Yang <leoyang.li@nxp.com>

Add multi_v7_lpae.config to support the Large Physical Address
Extension.

Signed-off-by: Alison Wang <alison.wang@nxp.com>

Enable CONFIG_MTD_CFI_AMDSTD to support CFI command set 0002.
Enable CONFIG_MTD_PHYSMAP_OF which allows the NOR flash driver code to
communicate with chips which are mapped physically into the CPU's memory.

[ Leo: CONFIG_MTD_PHYSMAP_OF implied ]

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>

[ Leo: CONFIG_FSL_SDK_FMAN implied ]
[Aisheng: fix minor conflicts ]
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>

This patch enables more drivers for LS1021A, such as FlexCAN, IFC, SATA,
PCIE, DCU, RTC, CAAM and Virtualization.

[leo: FlexCAN and DCU were enabled as 'm' in upstream.]
[Aisheng: fix minor conflict against next-20191209 ]
Signed-off-by: Alison Wang <alison.wang@nxp.com>

add CONFIG_FSL_PPFE_UTIL_DISABLED to arm32

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>

This patch is to add multi_v8.config for AArch32 support on ARMv8
platforms.

The default config for ARMv8 AArch32 support is multi_v7_defconfig +
multi_v7_lpae.config + multi_v8.config.

Signed-off-by: Alison Wang <alison.wang@nxp.com>

Set the necessary configs for marvell wireless solution.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>

disable ov5640 driver of upstreaming version

Signed-off-by: Robby Cai <robby.cai@nxp.com>

tcrypt module is required for testing crypto algorithms.

Note: CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is let to default value ("y"),
since setting it to "n" would slow down boot, i.e. have a system-level
effect.
For tcrypt testing CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=n is needed,
which will have to be done using a separate kernel config.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>

enable mipi camera ov5640 of subdev version

Signed-off-by: Robby Cai <robby.cai@nxp.com>

Enable Samsung's MIPI CSI driver

Signed-off-by: Robby Cai <robby.cai@nxp.com>

enable CONFIG_VIDEO_MXC_CSI_CAMERA as module

Signed-off-by: Robby Cai <robby.cai@nxp.com>

enable parallel camera ov5640 driver based on subdev,
used by iMX 6UL/ULL/SX/SL/SLL

Signed-off-by: Robby Cai <robby.cai@nxp.com>

This patch builds in MXC IPU output driver.

Signed-off-by: Liu Ying <victor.liu@nxp.com>

add v4l2 capture support for imx6qdl, including IPU CSI/PrP, V4L2 capture and the
camera ov5640 (mipi and parallel) drivers.

Signed-off-by: Robby Cai <robby.cai@nxp.com>

Correct the typo for CONFIG_LLC2.

Fixes: ec4753a4c99a("MLK-22558 imx_v6_v7_defconfig: enable the necessary net configs")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>

built-in SND_SOC_IMX_SI476X

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>

built-in SND_SOC_IMX_SII902X and SND_SOC_IMX_HDMI

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>

CONFIG_FB_MXC_DCIC=y
support dcic.

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>

CONFIG_FB_MXC_HDMI=y
CONFIG_FB_MXS_SII902X=y
CONFIG_MXC_HDMI_CEC=y

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>

enable PXP V4L2 driver

Signed-off-by: Robby Cai <robby.cai@nxp.com>