Set the necessary configs for marvell wireless solution.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>

disable ov5640 driver of upstreaming version

Signed-off-by: Robby Cai <robby.cai@nxp.com>

tcrypt module is required for testing crypto algorithms.

Note: CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is let to default value ("y"),
since setting it to "n" would slow down boot, i.e. have a system-level
effect.
For tcrypt testing CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=n is needed,
which will have to be done using a separate kernel config.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>

enable mipi camera ov5640 of subdev version

Signed-off-by: Robby Cai <robby.cai@nxp.com>

Enable Samsung's MIPI CSI driver

Signed-off-by: Robby Cai <robby.cai@nxp.com>

enable CONFIG_VIDEO_MXC_CSI_CAMERA as module

Signed-off-by: Robby Cai <robby.cai@nxp.com>

enable parallel camera ov5640 driver based on subdev,
used by iMX 6UL/ULL/SX/SL/SLL

Signed-off-by: Robby Cai <robby.cai@nxp.com>

This patch builds in MXC IPU output driver.

Signed-off-by: Liu Ying <victor.liu@nxp.com>

add v4l2 capture support for imx6qdl, including IPU CSI/PrP, V4L2 capture and the
camera ov5640 (mipi and parallel) drivers.

Signed-off-by: Robby Cai <robby.cai@nxp.com>

Correct the typo for CONFIG_LLC2.

Fixes: ec4753a4c99a("MLK-22558 imx_v6_v7_defconfig: enable the necessary net configs")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>

built-in SND_SOC_IMX_SI476X

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>

built-in SND_SOC_IMX_SII902X and SND_SOC_IMX_HDMI

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>

CONFIG_FB_MXC_DCIC=y
support dcic.

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>

CONFIG_FB_MXC_HDMI=y
CONFIG_FB_MXS_SII902X=y
CONFIG_MXC_HDMI_CEC=y

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>

enable PXP V4L2 driver

Signed-off-by: Robby Cai <robby.cai@nxp.com>

Enlarge CMA size to 320M so that GPU can reserve enough memory.

Signed-off-by: Ella Feng <ella.feng@nxp.com>

Disable etnaviv driver to use Vivante private driver.

Signed-off-by: Ella Feng <ella.feng@nxp.com>

Enable the necessary net configs:
	CONFIG_IP_MULTICAST
	CONFIG_VLAN_8021Q
	CONFIG_LLC2

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>

support audio sound card (wm8960/wm8958/wm8962/mqs)

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>

Remove this define, because the mma8541 use CONFIG_MXC_MMA8451.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>

Currently, we just use driver elan_ts.c, not elants_i2c.c. So this
patch change this.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>

No need for this config define, remove it.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
[ Aisheng : split arm64 changes ]
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

This patch sets CONFIG_FB_MXC_LDB to y so that we may
build in LDB driver.

Signed-off-by: Liu Ying <victor.liu@nxp.com>

This patch sets CONFIG_FB_MXC_SYNC_PANEL to y so that we
may build in IPUv3 framebuffer driver.

Signed-off-by: Liu Ying <victor.liu@nxp.com>

This patch sets CONFIG_MXC_IPU and CONFIG_MXC_IPU_PRE to y so that we
can build in IPUv3 common driver and IPUv3 prefetch drivers.

Signed-off-by: Liu Ying <victor.liu@nxp.com>

For now we'll use our internal IPUv3 common driver, so this patch
disables CONFIG_IMX_IPUV3_CORE from upstream kernel.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
[Leonard: Remove unrelated changes]
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

enable EPDC V1 and V2 driver

Signed-off-by: Robby Cai <robby.cai@nxp.com>

enable PXP v2 and v3 driver

Signed-off-by: Robby Cai <robby.cai@nxp.com>

Enable max17135 hwmon, mfd, regulator function

Signed-off-by: Robby Cai <robby.cai@nxp.com>

Enable 'FB_MXC_TRULY_WVGA_SYNC_PANEL' config by default
for imx6 and imx7 series which support the TRULY HX8369
mipi panel.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>

Enable 'FB_MXC_MIPI_DSI' config by default for imx6 and imx7
series which include the NXP MIPI DSI controller.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>

Enable 'FB_MXC_MIPI_DSI_SAMSUNG' config by default for
imx6 and imx7 series which include the Samsung MIPI DSI
controller.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>

Enable 'FB_MXC_RK_PANEL_RK055IQH042' config by default for
imx6 and imx7 series which support the RM68191 mipi panel.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>

Enable 'FB_MXC_RK_PANEL_RK055AHD042' config by default for imx6 and imx7
series which support the RM68200 mipi panel.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>

Enable 'FB_MXC_TRULY_PANEL_TFT3P5581E' config by default for imx6 and
imx7 series which support the TRULY TFT3P5581E mipi panel.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>

Enable 'FB_MXC_MIPI_DSI_NORTHWEST' config by default for imx6 and imx7
series which includes the Northwest Logic MIPI DSI controller.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>

Enable 'FB_MXC_ADV7535' by default for imx6 and imx7 series.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>

Enable max8903 charger for i.mx6 boards.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>

This reverts commit aaeabc18.

Since, on legacy i.MX6 and i.MX7 series, only framebuffer driver
can be supported.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>