Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild

Pull kbuild changes from Michal Marek:
 - fix for handling dependencies of *-objs targets by Masahiro Yamada
 - lots of cleanups in the kbuild machinery, also by Masahiro
 - fixes for the kconfig build to use an UTF-8 capable ncurses library
   if possible and to build on not-so-standard installs
 - some more minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Do not reference *-n variables in the Makefile
  kbuild: simplify build, clean, modbuiltin shorthands
  kbuild: arm: Do not define "comma" twice
  kbuild: remove obj-n and lib-n handling
  kbuild: remove unnecessary variable initializaions
  kbuild: remove unnecessary "obj- := dummy.o" trick
  kbuild: handle C=... and M=... after entering into build directory
  kbuild: use $(Q) for sub-make target
  kbuild: fake the "Entering directory ..." message more simply
  kconfig/lxdialog: get ncurses CFLAGS with pkg-config
  kconfig: nconfig: fix multi-byte UTF handling
  kconfig: lxdialog: fix spelling
  kbuild: Make scripts executable
  kbuild: remove redundant clean-files from scripts/kconfig/Makefile
  kbuild: refactor script/kconfig/Makefile
  kbuild: handle the dependency of multi-objs hostprogs appropriately
  kbuild: handle multi-objs dependency appropriately

Makefile

@@ -10,11 +10,9 @@ NAME = Shuffling Zombie Juror
 # Comments in this file are targeted only to the developer, do not
 # expect to learn how to build the kernel reading this file.
 
-# Do not:
-# o  use make's built-in rules and variables
-#    (this increases performance and avoids hard-to-debug behaviour);
-# o  print "Entering directory ...";
-MAKEFLAGS += -rR --no-print-directory
+# Do not use make's built-in rules and variables
+# (this increases performance and avoids hard-to-debug behaviour);
+MAKEFLAGS += -rR
 
 # Avoid funny character set dependencies
 unexport LC_ALL
@@ -97,34 +95,6 @@ endif
 
 export quiet Q KBUILD_VERBOSE
 
-# Call a source code checker (by default, "sparse") as part of the
-# C compilation.
-#
-# Use 'make C=1' to enable checking of only re-compiled files.
-# Use 'make C=2' to enable checking of *all* source files, regardless
-# of whether they are re-compiled or not.
-#
-# See the file "Documentation/sparse.txt" for more details, including
-# where to get the "sparse" utility.
-
-ifeq ("$(origin C)", "command line")
-  KBUILD_CHECKSRC = $(C)
-endif
-ifndef KBUILD_CHECKSRC
-  KBUILD_CHECKSRC = 0
-endif
-
-# Use make M=dir to specify directory of external module to build
-# Old syntax make ... SUBDIRS=$PWD is still supported
-# Setting the environment variable KBUILD_EXTMOD take precedence
-ifdef SUBDIRS
-  KBUILD_EXTMOD ?= $(SUBDIRS)
-endif
-
-ifeq ("$(origin M)", "command line")
-  KBUILD_EXTMOD := $(M)
-endif
-
 # kbuild supports saving output files in a separate directory.
 # To locate output files in a separate directory two syntaxes are supported.
 # In both cases the working directory must be the root of the kernel src.
@@ -140,7 +110,6 @@ endif
 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
 # variable.
 
-
 # KBUILD_SRC is set on invocation of make in OBJ directory
 # KBUILD_SRC is not intended to be used by the regular user (for now)
 ifeq ($(KBUILD_SRC),)
@@ -172,17 +141,9 @@ PHONY += $(MAKECMDGOALS) sub-make
 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 	@:
 
-# Fake the "Entering directory" message once, so that IDEs/editors are
-# able to understand relative filenames.
-       echodir := @echo
- quiet_echodir := @echo
-silent_echodir := @:
 sub-make: FORCE
-	$($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
-	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
-	KBUILD_SRC=$(CURDIR) \
-	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
-	$(filter-out _all sub-make,$(MAKECMDGOALS))
+	$(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
+	-f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
 
 # Leave processing to above invocation of make
 skip-makefile := 1
@@ -192,6 +153,39 @@ endif # ifeq ($(KBUILD_SRC),)
 # We process the rest of the Makefile if this is the final invocation of make
 ifeq ($(skip-makefile),)
 
+# Do not print "Entering directory ...",
+# but we want to display it when entering to the output directory
+# so that IDEs/editors are able to understand relative filenames.
+MAKEFLAGS += --no-print-directory
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+  KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+  KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+  KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+  KBUILD_EXTMOD := $(M)
+endif
+
 # If building an external module we do not care about the all: rule
 # but instead _all depend on modules
 PHONY += all
@@ -889,9 +883,7 @@ vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
 		     $(net-y) $(net-m) $(libs-y) $(libs-m)))
 
 vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
-		     $(init-n) $(init-) \
-		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
-		     $(net-n)  $(net-)  $(libs-n)    $(libs-))))
+		     $(init-) $(core-) $(drivers-) $(net-) $(libs-))))
 
 init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
 core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
@@ -1591,7 +1583,7 @@ endif
 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
 # Usage:
 # $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+clean := -f $(srctree)/scripts/Makefile.clean obj
 
 endif	# skip-makefile
 

arch/arm/Makefile

@@ -50,8 +50,6 @@ AS		+= -EL
 LD		+= -EL
 endif
 
-comma = ,
-
 # This selects which instruction set is used.
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes

arch/arm/mach-at91/Makefile

@@ -3,9 +3,6 @@
 #
 
 obj-y		:= gpio.o setup.o sysirq_mask.o
-obj-m		:=
-obj-n		:=
-obj-		:=
 
 obj-$(CONFIG_OLD_IRQ_AT91)	+= irq.o
 obj-$(CONFIG_OLD_CLK_AT91)	+= clock.o

arch/arm/mach-ebsa110/Makefile

@@ -5,6 +5,3 @@
 # Object file lists.
 
 obj-y			:= core.o io.o leds.o
-obj-m			:=
-obj-n			:=
-obj-			:=

arch/arm/mach-ep93xx/Makefile

@@ -2,9 +2,6 @@
 # Makefile for the linux kernel.
 #
 obj-y			:= core.o clock.o
-obj-m			:=
-obj-n			:=
-obj-			:=
 
 obj-$(CONFIG_EP93XX_DMA)	+= dma.o
 

arch/arm/mach-exynos/Makefile

@@ -7,11 +7,6 @@
 
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
 
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
 # Core
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o pmu.o exynos-smc.o firmware.o

arch/arm/mach-footbridge/Makefile

@@ -5,9 +5,6 @@
 # Object file lists.
 
 obj-y			:= common.o dma.o isa-irq.o
-obj-m			:=
-obj-n			:=
-obj-			:=
 
 pci-y			+= dc21285.o
 pci-$(CONFIG_ARCH_CATS) += cats-pci.o

arch/arm/mach-iop13xx/Makefile

-obj-y			:=
-obj-m			:=
-obj-n			:=
-obj-			:=
-
 obj-$(CONFIG_ARCH_IOP13XX) += setup.o
 obj-$(CONFIG_ARCH_IOP13XX) += irq.o
 obj-$(CONFIG_ARCH_IOP13XX) += pci.o

arch/arm/mach-iop32x/Makefile

@@ -3,9 +3,6 @@
 #
 
 obj-y			:= irq.o
-obj-m			:=
-obj-n			:=
-obj-			:=
 
 obj-$(CONFIG_MACH_GLANTANK) += glantank.o
 obj-$(CONFIG_ARCH_IQ80321) += iq80321.o

arch/arm/mach-iop33x/Makefile

@@ -3,9 +3,6 @@
 #
 
 obj-y			:= irq.o uart.o
-obj-m			:=
-obj-n			:=
-obj-			:=
 
 obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
 obj-$(CONFIG_MACH_IQ80332) += iq80332.o

arch/arm/mach-ks8695/Makefile

@@ -4,9 +4,6 @@
 #
 
 obj-y				:= cpu.o irq.o time.o devices.o
-obj-m				:=
-obj-n				:=
-obj-				:=
 
 # PCI support is optional
 obj-$(CONFIG_PCI)		+= pci.o

arch/arm/mach-rpc/Makefile

@@ -5,7 +5,3 @@
 # Object file lists.
 
 obj-y			:= dma.o ecard.o fiq.o irq.o riscpc.o time.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-

arch/arm/mach-s3c24xx/Makefile

@@ -7,11 +7,6 @@
 #
 # Licensed under GPLv2
 
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
 # core
 
 obj-y				+= common.o

arch/arm/mach-s3c64xx/Makefile

@@ -5,11 +5,6 @@
 #
 # Licensed under GPLv2
 
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
 # Core
 
 obj-y				+= common.o

arch/arm/mach-s5pv210/Makefile

@@ -7,11 +7,6 @@
 
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
 
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
 # Core
 
 obj-$(CONFIG_PM_SLEEP)		+= pm.o sleep.o

arch/arm/mach-sa1100/Makefile

@@ -4,9 +4,6 @@
 
 # Common support
 obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
-obj-m :=
-obj-n :=
-obj-  :=
 
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o

arch/arm/mach-u300/Makefile

@@ -3,9 +3,6 @@
 #
 
 obj-y		:= core.o
-obj-m		:=
-obj-n		:=
-obj-		:=
 
 obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
 obj-$(CONFIG_REGULATOR_AB3100)    += regulator.o

arch/arm/plat-iop/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-y :=
-
 # IOP32X
 obj-$(CONFIG_ARCH_IOP32X) += i2c.o
 obj-$(CONFIG_ARCH_IOP32X) += pci.o
@@ -27,7 +25,3 @@ obj-$(CONFIG_ARCH_IOP33X) += restart.o
 # IOP13XX
 obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
 obj-$(CONFIG_ARCH_IOP13XX) += time.o
-
-obj-m                  :=
-obj-n                  :=
-obj-                   :=

arch/arm/plat-omap/Makefile

@@ -6,9 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include
 
 # Common support
 obj-y := sram.o dma.o counter_32k.o
-obj-m :=
-obj-n :=
-obj-  :=
 
 # omap_device support (OMAP2+ only at the moment)
 

arch/arm/plat-samsung/Makefile

@@ -6,11 +6,6 @@
 
 ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
 
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
 # Objects we always build independent of SoC choice
 
 obj-y				+= init.o cpu.o