Skip to content
Snippets Groups Projects
Commit e44b59cd authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a couple of bug fixes, mostly for devicetree files

  NXP i.MX:
   - Use correct voltage on some i.MX8M board device trees to avoid
     hardware damage
   - Code fixes for a compiler warning and incorrect reference counting,
     both harmless.
   - Fix the i.MX8M SoC driver to correctly identify imx8mp
   - Fix watchdog configuration in imx6ul-kontron device tree.

  Broadcom:
   - A small regression fix for the Raspberry-Pi firmware driver
   - A Kconfig change to use the correct timer driver on Northstar
   - A DT fix for the Luxul XWC-2000 machine
   - Two more DT fixes for NSP SoCs

  STmicroelectronics STI
   - Revert one broken patch for L2 cache configuration

  ARM Versatile Express:
   - Fix a regression by reverting a broken DT cleanup

  TEE drivers:
   - MAINTAINERS: change tee mailing list"

* tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  Revert "ARM: sti: Implement dummy L2 cache's write_sec"
  soc: imx8m: fix build warning
  ARM: imx6: add missing put_device() call in imx6q_suspend_init()
  ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
  soc: imx8m: Correct i.MX8MP UID fuse offset
  ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
  ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
  arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
  arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
  arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
  ARM: dts: NSP: Correct FA2 mailbox node
  ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
  MAINTAINERS: change tee mailing list
  ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
  ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP
  ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000
  arm: dts: vexpress: Move mcc node back into motherboard node
parents 668f532d 42d3f7e8
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
Showing
with 141 additions and 114 deletions
MAINTAINERS
+ 3
− 3
View file @ e44b59cd
......@@ -12695,13 +12695,13 @@ F: arch/mips/boot/dts/ralink/omega2p.dts
 
OP-TEE DRIVER
M: Jens Wiklander <jens.wiklander@linaro.org>
L: tee-dev@lists.linaro.org
L: op-tee@lists.trustedfirmware.org
S: Maintained
F: drivers/tee/optee/
 
OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
M: Sumit Garg <sumit.garg@linaro.org>
L: tee-dev@lists.linaro.org
L: op-tee@lists.trustedfirmware.org
S: Maintained
F: drivers/char/hw_random/optee-rng.c
 
......@@ -16774,7 +16774,7 @@ F: include/media/i2c/tw9910.h
 
TEE SUBSYSTEM
M: Jens Wiklander <jens.wiklander@linaro.org>
L: tee-dev@lists.linaro.org
L: op-tee@lists.trustedfirmware.org
S: Maintained
F: Documentation/tee.txt
F: drivers/tee/
......
arch/arm/boot/dts/bcm-nsp.dtsi
+ 6
− 4
View file @ e44b59cd
......@@ -200,7 +200,7 @@
status = "disabled";
};
dma@20000 {
dma: dma@20000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x20000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
......@@ -215,6 +215,8 @@
clocks = <&iprocslow>;
clock-names = "apb_pclk";
#dma-cells = <1>;
dma-coherent;
status = "disabled";
};
sdio: sdhci@21000 {
......@@ -257,10 +259,10 @@
status = "disabled";
};
mailbox: mailbox@25000 {
mailbox: mailbox@25c00 {
compatible = "brcm,iproc-fa2-mbox";
reg = <0x25000 0x445>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x25c00 0x400>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
......
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+ 1
− 0
View file @ e44b59cd
......@@ -17,6 +17,7 @@
};
memory {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
......
arch/arm/boot/dts/bcm958522er.dts
+ 4
− 0
View file @ e44b59cd
......@@ -58,6 +58,10 @@
/* USB 3 support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958525er.dts
+ 4
− 0
View file @ e44b59cd
......@@ -58,6 +58,10 @@
/* USB 3 support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958525xmc.dts
+ 4
− 0
View file @ e44b59cd
......@@ -58,6 +58,10 @@
/* XHCI support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958622hr.dts
+ 4
− 0
View file @ e44b59cd
......@@ -58,6 +58,10 @@
/* USB 3 and SLIC support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958623hr.dts
+ 4
− 0
View file @ e44b59cd
......@@ -58,6 +58,10 @@
/* USB 3 and SLIC support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958625hr.dts
+ 4
− 0
View file @ e44b59cd
......@@ -69,6 +69,10 @@
status = "okay";
};
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958625k.dts
+ 4
− 0
View file @ e44b59cd
......@@ -48,6 +48,10 @@
};
};
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+ 0
− 13
View file @ e44b59cd
......@@ -232,13 +232,6 @@
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
......@@ -409,10 +402,4 @@
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0
>;
};
};
arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+ 13
− 0
View file @ e44b59cd
......@@ -57,6 +57,13 @@
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reset_out>;
......@@ -106,4 +113,10 @@
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x18b0
>;
};
};
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+ 73
− 73
View file @ e44b59cd
......@@ -100,79 +100,6 @@
};
};
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
oscclk0 {
/* MCC static memory clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <25000000 60000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk0";
};
v2m_oscclk1: oscclk1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <23750000 65000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
v2m_oscclk2: oscclk2 {
/* IO FPGA peripheral clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <24000000 24000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk2";
};
volt-vio {
/* Logic level voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VIO";
regulator-always-on;
label = "VIO";
};
temp-mcc {
/* MCC internal operating temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "MCC";
};
reset {
compatible = "arm,vexpress-reset";
arm,vexpress-sysreg,func = <5 0>;
};
muxfpga {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
shutdown {
compatible = "arm,vexpress-shutdown";
arm,vexpress-sysreg,func = <8 0>;
};
reboot {
compatible = "arm,vexpress-reboot";
arm,vexpress-sysreg,func = <9 0>;
};
dvimode {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
};
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
......@@ -435,6 +362,79 @@
};
};
};
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
oscclk0 {
/* MCC static memory clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <25000000 60000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk0";
};
v2m_oscclk1: oscclk1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <23750000 65000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
v2m_oscclk2: oscclk2 {
/* IO FPGA peripheral clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <24000000 24000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk2";
};
volt-vio {
/* Logic level voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VIO";
regulator-always-on;
label = "VIO";
};
temp-mcc {
/* MCC internal operating temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "MCC";
};
reset {
compatible = "arm,vexpress-reset";
arm,vexpress-sysreg,func = <5 0>;
};
muxfpga {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
shutdown {
compatible = "arm,vexpress-shutdown";
arm,vexpress-sysreg,func = <8 0>;
};
reboot {
compatible = "arm,vexpress-reboot";
arm,vexpress-sysreg,func = <9 0>;
};
dvimode {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
};
};
};
};
......
arch/arm/mach-bcm/Kconfig
+ 1
− 0
View file @ e44b59cd
......@@ -53,6 +53,7 @@ config ARCH_BCM_NSP
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_ERRATA_764369 if SMP
select ARM_TIMER_SP804
select THERMAL
select THERMAL_OF
help
......
arch/arm/mach-imx/pm-imx5.c
+ 4
− 2
View file @ e44b59cd
......@@ -295,14 +295,14 @@ static int __init imx_suspend_alloc_ocram(
if (!ocram_pool) {
pr_warn("%s: ocram pool unavailable!\n", __func__);
ret = -ENODEV;
goto put_node;
goto put_device;
}
ocram_base = gen_pool_alloc(ocram_pool, size);
if (!ocram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
ret = -ENOMEM;
goto put_node;
goto put_device;
}
phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
......@@ -312,6 +312,8 @@ static int __init imx_suspend_alloc_ocram(
if (virt_out)
*virt_out = virt;
put_device:
put_device(&pdev->dev);
put_node:
of_node_put(node);
......
arch/arm/mach-imx/pm-imx6.c
+ 6
− 4
View file @ e44b59cd
......@@ -493,14 +493,14 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
if (!ocram_pool) {
pr_warn("%s: ocram pool unavailable!\n", __func__);
ret = -ENODEV;
goto put_node;
goto put_device;
}
ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
if (!ocram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
ret = -ENOMEM;
goto put_node;
goto put_device;
}
ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
......@@ -523,7 +523,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
if (ret) {
pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
goto put_node;
goto put_device;
}
ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
......@@ -570,7 +570,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
&imx6_suspend,
MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
goto put_node;
goto put_device;
pl310_cache_map_failed:
iounmap(pm_info->gpc_base.vbase);
......@@ -580,6 +580,8 @@ iomuxc_map_failed:
iounmap(pm_info->src_base.vbase);
src_map_failed:
iounmap(pm_info->mmdc_base.vbase);
put_device:
put_device(&pdev->dev);
put_node:
of_node_put(node);
......
arch/arm/mach-sti/board-dt.c
+ 0
− 9
View file @ e44b59cd
......@@ -20,14 +20,6 @@ static const char *const stih41x_dt_match[] __initconst = {
NULL
};
static void sti_l2_write_sec(unsigned long val, unsigned reg)
{
/*
* We can't write to secure registers as we are in non-secure
* mode, until we have some SMI service available.
*/
}
DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
.dt_compat = stih41x_dt_match,
.l2c_aux_val = L2C_AUX_CTRL_SHARED_OVERRIDE |
......@@ -36,5 +28,4 @@ DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
L2C_AUX_CTRL_WAY_SIZE(4),
.l2c_aux_mask = 0xc0000fff,
.smp = smp_ops(sti_smp_ops),
.l2c_write_sec = sti_l2_write_sec,
MACHINE_END
arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+ 2
− 2
View file @ e44b59cd
......@@ -136,7 +136,7 @@
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <3000000>;
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
......@@ -144,7 +144,7 @@
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <900000>;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
......
arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+ 2
− 2
View file @ e44b59cd
......@@ -208,7 +208,7 @@
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <3000000>;
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
......@@ -216,7 +216,7 @@
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <900000>;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
......
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+ 2
− 2
View file @ e44b59cd
......@@ -113,7 +113,7 @@
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <3000000>;
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
......@@ -121,7 +121,7 @@
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <900000>;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment