[SCSI] qla4xxx: add bsg support

This patch adds bsg support to qla4xxx.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla4xxx/Makefile

 qla4xxx-y := ql4_os.o ql4_init.o ql4_mbx.o ql4_iocb.o ql4_isr.o \
-		ql4_nx.o ql4_nvram.o ql4_dbg.o ql4_attr.o
+		ql4_nx.o ql4_nvram.o ql4_dbg.o ql4_attr.o ql4_bsg.o
 
 obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx.o
 

drivers/scsi/qla4xxx/ql4_bsg.c

+/*
+ * QLogic iSCSI HBA Driver
+ * Copyright (c) 2011 QLogic Corporation
+ *
+ * See LICENSE.qla4xxx for copyright and licensing details.
+ */
+
+#include "ql4_def.h"
+#include "ql4_glbl.h"
+#include "ql4_bsg.h"
+
+static int
+qla4xxx_read_flash(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	uint32_t sg_cnt;
+	uint32_t offset = 0;
+	uint32_t length = 0;
+	dma_addr_t flash_dma;
+	uint8_t *flash = NULL;
+	int rval = 0;
+
+	bsg_reply->reply_payload_rcv_len = 0;
+
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		return -EINVAL;
+
+	if (ha->flash_state != QLFLASH_WAITING)
+		return -EBUSY;
+
+	/* TODO: Add check for adapter online, reset active?? */
+	sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list,
+			    bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+
+	if (!sg_cnt)
+		return -ENOMEM;
+
+	if (sg_cnt != bsg_job->reply_payload.sg_cnt) {
+		ql4_printk(KERN_ERR, ha, "dma mapping resulted in different"
+			   " sg counts, sg_cnt: %x dma_sg_cnt: %x\n",
+			   bsg_job->reply_payload.sg_cnt, sg_cnt);
+		rval = -EAGAIN;
+		goto unmap_sg;
+	}
+
+	offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+	length = bsg_job->reply_payload.payload_len;
+
+	flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma,
+				   GFP_KERNEL);
+	if (!flash) {
+		ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash "
+			   "data\n", __func__);
+		rval = -ENOMEM;
+		goto unmap_sg;
+	}
+
+	ha->flash_state = QLFLASH_READING;
+	if (qla4xxx_get_flash(ha, flash_dma, offset, length))
+		bsg_reply->result = (DID_ERROR << 16);
+	else {
+		sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+				    bsg_job->reply_payload.sg_cnt,
+				    flash, length);
+
+		bsg_reply->result = DID_OK;
+		bsg_reply->reply_payload_rcv_len = length;
+	}
+
+	if (flash)
+		dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma);
+
+	ha->flash_state = QLFLASH_WAITING;
+unmap_sg:
+	dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list,
+		     bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+	if (!rval)
+		bsg_job_done(bsg_job, bsg_reply->result,
+			     bsg_reply->reply_payload_rcv_len);
+	return rval;
+}
+
+static int
+qla4xxx_update_flash(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	uint32_t sg_cnt;
+	uint32_t length = 0;
+	uint32_t offset = 0;
+	uint32_t options = 0;
+	dma_addr_t flash_dma;
+	uint8_t *flash = NULL;
+	int rval = 0;
+
+	bsg_reply->reply_payload_rcv_len = 0;
+
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		return -EINVAL;
+
+	if (ha->flash_state != QLFLASH_WAITING)
+		return -EBUSY;
+
+	sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
+			    bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+
+	if (!sg_cnt)
+		return -ENOMEM;
+
+	if (sg_cnt != bsg_job->request_payload.sg_cnt) {
+		ql4_printk(KERN_ERR, ha, "dma mapping resulted in different "
+			   "sg counts request_sg_cnt: %x dma_request_sg_cnt: "
+			   "%x\n", bsg_job->request_payload.sg_cnt, sg_cnt);
+		rval = -EAGAIN;
+		goto unmap_sg;
+	}
+
+	length = bsg_job->request_payload.payload_len;
+	offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+	options = bsg_req->rqst_data.h_vendor.vendor_cmd[2];
+
+	flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma,
+				   GFP_KERNEL);
+	if (!flash) {
+		ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash "
+			   "data\n", __func__);
+		rval = -ENOMEM;
+		goto unmap_sg;
+	}
+
+	ha->flash_state = QLFLASH_WRITING;
+	sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+			  bsg_job->request_payload.sg_cnt, flash, length);
+
+	if (qla4xxx_set_flash(ha, flash_dma, offset, length, options))
+		bsg_reply->result = (DID_ERROR << 16);
+	else {
+		bsg_reply->result = DID_OK;
+		bsg_reply->reply_payload_rcv_len = length;
+	}
+
+	if (flash)
+		dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma);
+	ha->flash_state = QLFLASH_WAITING;
+unmap_sg:
+	dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list,
+		     bsg_job->reply_payload.sg_cnt, DMA_TO_DEVICE);
+
+	if (!rval)
+		bsg_job_done(bsg_job, bsg_reply->result,
+			     bsg_reply->reply_payload_rcv_len);
+	return rval;
+}
+
+/**
+ * qla4xxx_process_vendor_specific - handle vendor specific bsg request
+ * @job: iscsi_bsg_job to handle
+ **/
+int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job)
+{
+	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+
+	switch (bsg_req->rqst_data.h_vendor.vendor_cmd[0]) {
+	case QLISCSI_VND_READ_FLASH:
+		return qla4xxx_read_flash(bsg_job);
+
+	case QLISCSI_VND_UPDATE_FLASH:
+		return qla4xxx_update_flash(bsg_job);
+
+	default:
+		ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: "
+			   "0x%x\n", __func__, bsg_req->msgcode);
+		bsg_reply->result = (DID_ERROR << 16);
+		bsg_reply->reply_payload_rcv_len = 0;
+		bsg_job_done(bsg_job, bsg_reply->result,
+			     bsg_reply->reply_payload_rcv_len);
+		return -ENOSYS;
+	}
+}
+
+/**
+ * qla4xxx_bsg_request - handle bsg request from ISCSI transport
+ * @job: iscsi_bsg_job to handle
+ */
+int qla4xxx_bsg_request(struct bsg_job *bsg_job)
+{
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+
+	switch (bsg_req->msgcode) {
+	case ISCSI_BSG_HST_VENDOR:
+		return qla4xxx_process_vendor_specific(bsg_job);
+
+	default:
+		ql4_printk(KERN_ERR, ha, "%s: invalid BSG command: 0x%x\n",
+			   __func__, bsg_req->msgcode);
+	}
+
+	return -ENOSYS;
+}

drivers/scsi/qla4xxx/ql4_bsg.h

+/*
+ * QLogic iSCSI HBA Driver
+ * Copyright (c) 2011 QLogic Corporation
+ *
+ * See LICENSE.qla4xxx for copyright and licensing details.
+ */
+#ifndef __QL4_BSG_H
+#define __QL4_BSG_H
+
+/* BSG Vendor specific commands */
+#define QLISCSI_VND_READ_FLASH		1
+#define QLISCSI_VND_UPDATE_FLASH	2
+
+#endif

drivers/scsi/qla4xxx/ql4_def.h

@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 #include <linux/aer.h>
+#include <linux/bsg-lib.h>
 
 #include <net/tcp.h>
 #include <scsi/scsi.h>
@@ -33,6 +34,8 @@
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_transport.h>
 #include <scsi/scsi_transport_iscsi.h>
+#include <scsi/scsi_bsg_iscsi.h>
+#include <scsi/scsi_netlink.h>
 
 #include "ql4_dbg.h"
 #include "ql4_nx.h"
@@ -599,6 +602,11 @@ struct scsi_qla_host {
 	uint16_t bootload_minor;
 	uint16_t bootload_patch;
 	uint16_t bootload_build;
+
+	uint32_t flash_state;
+#define	QLFLASH_WAITING		0
+#define	QLFLASH_READING		1
+#define	QLFLASH_WRITING		2
 };
 
 static inline int is_ipv4_enabled(struct scsi_qla_host *ha)

drivers/scsi/qla4xxx/ql4_glbl.h

@@ -151,6 +151,10 @@ void qla4_8xxx_need_qsnt_handler(struct scsi_qla_host *ha);
 void qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha);
 void qla4_8xxx_set_drv_active(struct scsi_qla_host *ha);
 
+/* BSG Functions */
+int qla4xxx_bsg_request(struct bsg_job *bsg_job);
+int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job);
+
 extern int ql4xextended_error_logging;
 extern int ql4xdontresethba;
 extern int ql4xenablemsix;

drivers/scsi/qla4xxx/ql4_os.c

@@ -131,6 +131,7 @@ static struct scsi_host_template qla4xxx_driver_template = {
 
 	.max_sectors		= 0xFFFF,
 	.shost_attrs		= qla4xxx_host_attrs,
+	.vendor_id		= SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC,
 };
 
 static struct iscsi_transport qla4xxx_iscsi_transport = {
@@ -146,6 +147,7 @@ static struct iscsi_transport qla4xxx_iscsi_transport = {
 	.set_iface_param	= qla4xxx_iface_set_param,
 	.session_recovery_timedout = qla4xxx_recovery_timedout,
 	.get_iface_param	= qla4xxx_get_iface_param,
+	.bsg_request		= qla4xxx_bsg_request,
 };
 
 static struct scsi_transport_template *qla4xxx_scsi_transport;