Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc device tree conversions (part 2) from Olof Johansson:
 "These continue the device tree work from part 1, this set is for the
  tegra, mxs and imx platforms, all of which have dependencies on clock
  or pinctrl changes submitted earlier."

Fix up trivial conflicts due to nearby changes in
drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: dt: tegra: invert status=disable vs status=okay
  ARM: dt: tegra: consistent basic property ordering
  ARM: dt: tegra: sort nodes based on bus order
  ARM: dt: tegra: remove duplicate device_type property
  ARM: dt: tegra: consistenly use lower-case for hex constants
  ARM: dt: tegra: format regs properties consistently
  ARM: dt: tegra: gpio comment cleanup
  ARM: dt: tegra: remove unnecessary unit addresses
  ARM: dt: tegra: whitespace cleanup
  ARM: dt: tegra cardhu: fix typo in SDHCI node name
  ARM: dt: tegra: cardhu: register core regulator tps62361
  ARM: dt: tegra30.dtsi: Add SMMU node
  ARM: dt: tegra20.dtsi: Add GART node
  ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes
  ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes
  ARM: dt: tegra: Add device tree support for AHB
  ARM: dts: enable audio support for imx28-evk
  ARM: dts: enable i2c device for imx28-evk
  i2c: mxs: add device tree probe support
  ARM: dts: enable mmc for imx28-evk
  ...

Documentation/devicetree/bindings/arm/fsl.txt

 Freescale i.MX Platforms Device Tree Bindings
 -----------------------------------------------
 
+i.MX23 Evaluation Kit
+Required root node properties:
+    - compatible = "fsl,imx23-evk", "fsl,imx23";
+
+i.MX28 Evaluation Kit
+Required root node properties:
+    - compatible = "fsl,imx28-evk", "fsl,imx28";
+
 i.MX51 Babbage Board
 Required root node properties:
     - compatible = "fsl,imx51-babbage", "fsl,imx51";
@@ -29,6 +37,10 @@ i.MX6 Quad SABRE Lite Board
 Required root node properties:
     - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
 
+i.MX6 Quad SABRE Smart Device Board
+Required root node properties:
+    - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
 Generic i.MX boards
 -------------------
 

Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt

+* Freescale MXS DMA
+
+Required properties:
+- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
+- reg : Should contain registers location and length
+
+Supported chips:
+imx23, imx28.
+
+Examples:
+dma-apbh@80004000 {
+	compatible = "fsl,imx28-dma-apbh";
+	reg = <0x80004000 2000>;
+};
+
+dma-apbx@80024000 {
+	compatible = "fsl,imx28-dma-apbx";
+	reg = <0x80024000 2000>;
+};

Documentation/devicetree/bindings/gpio/gpio-mxs.txt

+* Freescale MXS GPIO controller
+
+The Freescale MXS GPIO controller is part of MXS PIN controller.  The
+GPIOs are organized in port/bank.  Each port consists of 32 GPIOs.
+
+As the GPIO controller is embedded in the PIN controller and all the
+GPIO ports share the same IO space with PIN controller, the GPIO node
+will be represented as sub-nodes of MXS pinctrl node.
+
+Required properties for GPIO node:
+- compatible : Should be "fsl,<soc>-gpio".  The supported SoCs include
+  imx23 and imx28.
+- interrupts : Should be the port interrupt shared by all 32 pins.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify optional parameters (currently
+  unused).
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
+  The second cell bits[3:0] is used to specify trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
+
+Note: Each GPIO port should have an alias correctly numbered in "aliases"
+node.
+
+Examples:
+
+aliases {
+	gpio0 = &gpio0;
+	gpio1 = &gpio1;
+	gpio2 = &gpio2;
+	gpio3 = &gpio3;
+	gpio4 = &gpio4;
+};
+
+pinctrl@80018000 {
+	compatible = "fsl,imx28-pinctrl", "simple-bus";
+	reg = <0x80018000 2000>;
+
+	gpio0: gpio@0 {
+		compatible = "fsl,imx28-gpio";
+		interrupts = <127>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio1: gpio@1 {
+		compatible = "fsl,imx28-gpio";
+		interrupts = <126>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@2 {
+		compatible = "fsl,imx28-gpio";
+		interrupts = <125>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio@3 {
+		compatible = "fsl,imx28-gpio";
+		interrupts = <124>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio4: gpio@4 {
+		compatible = "fsl,imx28-gpio";
+		interrupts = <123>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};

Documentation/devicetree/bindings/i2c/i2c-mxs.txt

+* Freescale MXS Inter IC (I2C) Controller
+
+Required properties:
+- compatible: Should be "fsl,<chip>-i2c"
+- reg: Should contain registers location and length
+- interrupts: Should contain ERROR and DMA interrupts
+
+Examples:
+
+i2c0: i2c@80058000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-i2c";
+	reg = <0x80058000 2000>;
+	interrupts = <111 68>;
+};

Documentation/devicetree/bindings/mmc/mxs-mmc.txt

+* Freescale MXS MMC controller
+
+The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
+to support MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+- compatible: Should be "fsl,<chip>-mmc".  The supported chips include
+  imx23 and imx28.
+- reg: Should contain registers location and length
+- interrupts: Should contain ERROR and DMA interrupts
+- fsl,ssp-dma-channel: APBH DMA channel for the SSP
+- bus-width: Number of data lines, can be <1>, <4>, or <8>
+
+Optional properties:
+- wp-gpios: Specify GPIOs for write protection
+
+Examples:
+
+ssp0: ssp@80010000 {
+	compatible = "fsl,imx28-mmc";
+	reg = <0x80010000 2000>;
+	interrupts = <96 82>;
+	fsl,ssp-dma-channel = <0>;
+	bus-width = <8>;
+};

Documentation/devicetree/bindings/net/fsl-fec.txt

@@ -14,7 +14,7 @@ Optional properties:
 
 Example:
 
-fec@83fec000 {
+ethernet@83fec000 {
 	compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 	reg = <0x83fec000 0x4000>;
 	interrupts = <87>;

Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt

@@ -11,7 +11,7 @@ Optional properties:
 
 Example:
 
-uart@73fbc000 {
+serial@73fbc000 {
 	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 	reg = <0x73fbc000 0x4000>;
 	interrupts = <31>;

arch/arm/Kconfig

@@ -459,6 +459,7 @@ config ARCH_MXS
 	select COMMON_CLK
 	select HAVE_CLK_PREPARE
 	select PINCTRL
+	select USE_OF
 	help
 	  Support for Freescale MXS-based family of processors
 

arch/arm/Kconfig.debug

@@ -209,6 +209,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX50 or i.MX53.
 
+	config DEBUG_IMX6Q_UART2
+		bool "i.MX6Q Debug UART2"
+		depends on SOC_IMX6Q
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6Q UART2. This is correct for e.g. the SabreLite
+                  board.
+
 	config DEBUG_IMX6Q_UART4
 		bool "i.MX6Q Debug UART4"
 		depends on SOC_IMX6Q

arch/arm/boot/dts/imx23-evk.dts

+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx23.dtsi"
+
+/ {
+	model = "Freescale i.MX23 Evaluation Kit";
+	compatible = "fsl,imx23-evk", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <8>;
+				wp-gpios = <&gpio1 30 0>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/imx23.dtsi

+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&icoll>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx23-icoll", "fsl,mxs-icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			dma-apbh@80004000 {
+				compatible = "fsl,imx23-dma-apbh";
+				reg = <0x80004000 2000>;
+			};
+
+			ecc@80008000 {
+				reg = <0x80008000 2000>;
+				status = "disabled";
+			};
+
+			bch@8000a000 {
+				reg = <0x8000a000 2000>;
+				status = "disabled";
+			};
+
+			gpmi@8000c000 {
+				reg = <0x8000c000 2000>;
+				status = "disabled";
+			};
+
+			ssp0: ssp@80010000 {
+				reg = <0x80010000 2000>;
+				interrupts = <15 14>;
+				fsl,ssp-dma-channel = <1>;
+				status = "disabled";
+			};
+
+			etm@80014000 {
+				reg = <0x80014000 2000>;
+				status = "disabled";
+			};
+
+			pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-pinctrl", "simple-bus";
+				reg = <0x80018000 2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					interrupts = <16>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					interrupts = <17>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					interrupts = <18>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x11a2 0x11b2>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x2020 0x2030 0x2040
+						0x2050 0x0082 0x0092 0x00a2
+						0x00b2 0x2000 0x2010 0x2060>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				mmc0_pins_fixup: mmc0-pins-fixup {
+					fsl,pinmux-ids = <0x2010 0x2060>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			digctl@8001c000 {
+				reg = <0x8001c000 2000>;
+				status = "disabled";
+			};
+
+			emi@80020000 {
+				reg = <0x80020000 2000>;
+				status = "disabled";
+			};
+
+			dma-apbx@80024000 {
+				compatible = "fsl,imx23-dma-apbx";
+				reg = <0x80024000 2000>;
+			};
+
+			dcp@80028000 {
+				reg = <0x80028000 2000>;
+				status = "disabled";
+			};
+
+			pxp@8002a000 {
+				reg = <0x8002a000 2000>;
+				status = "disabled";
+			};
+
+			ocotp@8002c000 {
+				reg = <0x8002c000 2000>;
+				status = "disabled";
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 2000>;
+				status = "disabled";
+			};
+
+			lcdif@80030000 {
+				reg = <0x80030000 2000>;
+				status = "disabled";
+			};
+
+			ssp1: ssp@80034000 {
+				reg = <0x80034000 2000>;
+				interrupts = <2 20>;
+				fsl,ssp-dma-channel = <2>;
+				status = "disabled";
+			};
+
+			tvenc@80038000 {
+				reg = <0x80038000 2000>;
+				status = "disabled";
+			};
+                };
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clkctl@80040000 {
+				reg = <0x80040000 2000>;
+				status = "disabled";
+			};
+
+			saif0: saif@80042000 {
+				reg = <0x80042000 2000>;
+				status = "disabled";
+			};
+
+			power@80044000 {
+				reg = <0x80044000 2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				reg = <0x80046000 2000>;
+				status = "disabled";
+			};
+
+			audio-out@80048000 {
+				reg = <0x80048000 2000>;
+				status = "disabled";
+			};
+
+			audio-in@8004c000 {
+				reg = <0x8004c000 2000>;
+				status = "disabled";
+			};
+
+			lradc@80050000 {
+				reg = <0x80050000 2000>;
+				status = "disabled";
+			};
+
+			spdif@80054000 {
+				reg = <0x80054000 2000>;
+				status = "disabled";
+			};
+
+			i2c@80058000 {
+				reg = <0x80058000 2000>;
+				status = "disabled";
+			};
+
+			rtc@8005c000 {
+				reg = <0x8005c000 2000>;
+				status = "disabled";
+			};
+
+			pwm@80064000 {
+				reg = <0x80064000 2000>;
+				status = "disabled";
+			};
+
+			timrot@80068000 {
+				reg = <0x80068000 2000>;
+				status = "disabled";
+			};
+
+			auart0: serial@8006c000 {
+				reg = <0x8006c000 0x2000>;
+				status = "disabled";
+			};
+
+			auart1: serial@8006e000 {
+				reg = <0x8006e000 0x2000>;
+				status = "disabled";
+			};
+
+			duart: serial@80070000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80070000 0x2000>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			usbphy@8007c000 {
+				reg = <0x8007c000 0x2000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usbctrl@80080000 {
+			reg = <0x80080000 0x10000>;
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/imx27-phytec-phycore.dts

@@ -27,22 +27,22 @@
 				status = "okay";
 			};
 
-			uart@1000a000 {
+			serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
-			uart@1000b000 {
+			serial@1000b000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
-			uart@1000c000 {
+			serial@1000c000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
-			fec@1002b000 {
+			ethernet@1002b000 {
 				status = "okay";
 			};
 

arch/arm/boot/dts/imx27.dtsi

@@ -59,28 +59,28 @@
 				status = "disabled";
 			};
 
-			uart1: uart@1000a000 {
+			uart1: serial@1000a000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000a000 0x1000>;
 				interrupts = <20>;
 				status = "disabled";
 			};
 
-			uart2: uart@1000b000 {
+			uart2: serial@1000b000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000b000 0x1000>;
 				interrupts = <19>;
 				status = "disabled";
 			};
 
-			uart3: uart@1000c000 {
+			uart3: serial@1000c000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000c000 0x1000>;
 				interrupts = <18>;
 				status = "disabled";
 			};
 
-			uart4: uart@1000d000 {
+			uart4: serial@1000d000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000d000 0x1000>;
 				interrupts = <17>;
@@ -183,14 +183,14 @@
 				status = "disabled";
 			};
 
-			uart5: uart@1001b000 {
+			uart5: serial@1001b000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1001b000 0x1000>;
 				interrupts = <49>;
 				status = "disabled";
 			};
 
-			uart6: uart@1001c000 {
+			uart6: serial@1001c000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1001c000 0x1000>;
 				interrupts = <48>;
@@ -206,7 +206,7 @@
 				status = "disabled";
 			};
 
-			fec: fec@1002b000 {
+			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
 				reg = <0x1002b000 0x4000>;
 				interrupts = <50>;

arch/arm/boot/dts/imx28-evk.dts

+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "Freescale i.MX28 Evaluation Kit";
+	compatible = "fsl,imx28-evk", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <8>;
+				wp-gpios = <&gpio2 12 0>;
+				status = "okay";
+			};
+
+			ssp1: ssp@80012000 {
+				compatible = "fsl,imx28-mmc";
+				bus-width = <8>;
+				wp-gpios = <&gpio0 28 0>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				sgtl5000: codec@0a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};

arch/arm/boot/dts/imx28.dtsi

+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&icoll>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		saif0 = &saif0;
+		saif1 = &saif1;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3c900>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			hsadc@80002000 {
+				reg = <0x80002000 2000>;
+				interrupts = <13 87>;
+				status = "disabled";
+			};
+
+			dma-apbh@80004000 {
+				compatible = "fsl,imx28-dma-apbh";
+				reg = <0x80004000 2000>;
+			};
+
+			perfmon@80006000 {
+				reg = <0x80006000 800>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			bch@8000a000 {
+				reg = <0x8000a000 2000>;
+				interrupts = <41>;
+				status = "disabled";
+			};
+
+			gpmi@8000c000 {
+				reg = <0x8000c000 2000>;
+				interrupts = <42 88>;
+				status = "disabled";
+			};
+
+			ssp0: ssp@80010000 {
+				reg = <0x80010000 2000>;
+				interrupts = <96 82>;
+				fsl,ssp-dma-channel = <0>;
+				status = "disabled";
+			};
+
+			ssp1: ssp@80012000 {
+				reg = <0x80012000 2000>;
+				interrupts = <97 83>;
+				fsl,ssp-dma-channel = <1>;
+				status = "disabled";
+			};
+
+			ssp2: ssp@80014000 {
+				reg = <0x80014000 2000>;
+				interrupts = <98 84>;
+				fsl,ssp-dma-channel = <2>;
+				status = "disabled";
+			};
+
+			ssp3: ssp@80016000 {
+				reg = <0x80016000 2000>;
+				interrupts = <99 85>;
+				fsl,ssp-dma-channel = <3>;
+				status = "disabled";
+			};
+
+			pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-pinctrl", "simple-bus";
+				reg = <0x80018000 2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <127>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <126>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <125>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@3 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <124>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@4 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <123>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x3102 0x3112>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				mac0_pins_a: mac0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x4000 0x4010 0x4020
+						0x4030 0x4040 0x4060 0x4070
+						0x4080 0x4100>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				mac1_pins_a: mac1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
+						0x40e1 0x40b1 0x40c1>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x2000 0x2010 0x2020
+						0x2030 0x2040 0x2050 0x2060
+						0x2070 0x2080 0x2090 0x20a0>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				mmc0_cd_cfg: mmc0-cd-cfg {
+					fsl,pinmux-ids = <0x2090>;
+					fsl,pull-up = <0>;
+				};
+
+				mmc0_sck_cfg: mmc0-sck-cfg {
+					fsl,pinmux-ids = <0x20a0>;
+					fsl,drive-strength = <2>;
+					fsl,pull-up = <0>;
+				};
+
+				i2c0_pins_a: i2c0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x3180 0x3190>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				saif0_pins_a: saif0@0 {
+					reg = <0>;
+					fsl,pinmux-ids =
+						<0x3140 0x3150 0x3160 0x3170>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				saif1_pins_a: saif1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x31a0>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+
+			digctl@8001c000 {
+				reg = <0x8001c000 2000>;
+				interrupts = <89>;
+				status = "disabled";
+			};
+
+			etm@80022000 {
+				reg = <0x80022000 2000>;
+				status = "disabled";
+			};
+
+			dma-apbx@80024000 {
+				compatible = "fsl,imx28-dma-apbx";
+				reg = <0x80024000 2000>;
+			};
+
+			dcp@80028000 {
+				reg = <0x80028000 2000>;
+				interrupts = <52 53 54>;
+				status = "disabled";
+			};
+
+			pxp@8002a000 {
+				reg = <0x8002a000 2000>;
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			ocotp@8002c000 {
+				reg = <0x8002c000 2000>;
+				status = "disabled";
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 2000>;
+				status = "disabled";
+			};
+
+			lcdif@80030000 {
+				reg = <0x80030000 2000>;
+				interrupts = <38 86>;
+				status = "disabled";
+			};
+
+			can0: can@80032000 {
+				reg = <0x80032000 2000>;
+				interrupts = <8>;
+				status = "disabled";
+			};
+
+			can1: can@80034000 {
+				reg = <0x80034000 2000>;
+				interrupts = <9>;
+				status = "disabled";
+			};
+
+			simdbg@8003c000 {
+				reg = <0x8003c000 200>;
+				status = "disabled";
+			};
+
+			simgpmisel@8003c200 {
+				reg = <0x8003c200 100>;
+				status = "disabled";
+			};
+
+			simsspsel@8003c300 {
+				reg = <0x8003c300 100>;
+				status = "disabled";
+			};
+
+			simmemsel@8003c400 {
+				reg = <0x8003c400 100>;
+				status = "disabled";
+			};
+
+			gpiomon@8003c500 {
+				reg = <0x8003c500 100>;
+				status = "disabled";
+			};
+
+			simenet@8003c700 {
+				reg = <0x8003c700 100>;
+				status = "disabled";
+			};
+
+			armjtag@8003c800 {
+				reg = <0x8003c800 100>;
+				status = "disabled";
+			};
+                };
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clkctl@80040000 {
+				reg = <0x80040000 2000>;
+				status = "disabled";
+			};
+
+			saif0: saif@80042000 {
+				compatible = "fsl,imx28-saif";
+				reg = <0x80042000 2000>;
+				interrupts = <59 80>;
+				fsl,saif-dma-channel = <4>;
+				status = "disabled";
+			};
+
+			power@80044000 {
+				reg = <0x80044000 2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				compatible = "fsl,imx28-saif";
+				reg = <0x80046000 2000>;
+				interrupts = <58 81>;
+				fsl,saif-dma-channel = <5>;
+				status = "disabled";
+			};
+
+			lradc@80050000 {
+				reg = <0x80050000 2000>;
+				status = "disabled";
+			};
+
+			spdif@80054000 {
+				reg = <0x80054000 2000>;
+				interrupts = <45 66>;
+				status = "disabled";
+			};
+
+			rtc@80056000 {
+				reg = <0x80056000 2000>;
+				interrupts = <28 29>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x80058000 2000>;
+				interrupts = <111 68>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@8005a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x8005a000 2000>;
+				interrupts = <110 69>;
+				status = "disabled";
+			};
+
+			pwm@80064000 {
+				reg = <0x80064000 2000>;
+				status = "disabled";
+			};
+
+			timrot@80068000 {
+				reg = <0x80068000 2000>;
+				status = "disabled";
+			};
+
+			auart0: serial@8006a000 {
+				reg = <0x8006a000 0x2000>;
+				interrupts = <112 70 71>;
+				status = "disabled";
+			};
+
+			auart1: serial@8006c000 {
+				reg = <0x8006c000 0x2000>;
+				interrupts = <113 72 73>;
+				status = "disabled";
+			};
+
+			auart2: serial@8006e000 {
+				reg = <0x8006e000 0x2000>;
+				interrupts = <114 74 75>;
+				status = "disabled";
+			};
+
+			auart3: serial@80070000 {
+				reg = <0x80070000 0x2000>;
+				interrupts = <115 76 77>;
+				status = "disabled";
+			};
+
+			auart4: serial@80072000 {
+				reg = <0x80072000 0x2000>;
+				interrupts = <116 78 79>;
+				status = "disabled";
+			};
+
+			duart: serial@80074000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80074000 0x1000>;
+				interrupts = <47>;
+				status = "disabled";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				reg = <0x8007c000 0x2000>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				reg = <0x8007e000 0x2000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usbctrl0: usbctrl@80080000 {
+			reg = <0x80080000 0x10000>;
+			status = "disabled";
+		};
+
+		usbctrl1: usbctrl@80090000 {
+			reg = <0x80090000 0x10000>;
+			status = "disabled";
+		};
+
+		dflpt@800c0000 {
+			reg = <0x800c0000 0x10000>;
+			status = "disabled";
+		};
+
+		mac0: ethernet@800f0000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f0000 0x4000>;
+			interrupts = <101>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@800f4000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f4000 0x4000>;
+			interrupts = <102>;
+			status = "disabled";
+		};
+
+		switch@800f8000 {
+			reg = <0x800f8000 0x8000>;
+			status = "disabled";
+		};
+
+	};
+};

arch/arm/boot/dts/imx51-babbage.dts

@@ -17,10 +17,6 @@
 	model = "Freescale i.MX51 Babbage Board";
 	compatible = "fsl,imx51-babbage", "fsl,imx51";
 
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
 	memory {
 		reg = <0x90000000 0x20000000>;
 	};
@@ -40,7 +36,7 @@
 					status = "okay";
 				};
 
-				uart3: uart@7000c000 {
+				uart3: serial@7000c000 {
 					fsl,uart-has-rtscts;
 					status = "okay";
 				};
@@ -166,6 +162,11 @@
 						};
 					};
 				};
+
+				ssi2: ssi@70014000 {
+					fsl,mode = "i2s-slave";
+					status = "okay";
+				};
 			};
 
 			wdog@73f98000 { /* WDOG1 */
@@ -177,12 +178,12 @@
 				reg = <0x73fa8000 0x4000>;
 			};
 
-			uart1: uart@73fbc000 {
+			uart1: serial@73fbc000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
-			uart2: uart@73fc0000 {
+			uart2: serial@73fc0000 {
 				status = "okay";
 			};
 		};
@@ -195,13 +196,20 @@
 			i2c@83fc4000 { /* I2C2 */
 				status = "okay";
 
-				codec: sgtl5000@0a {
+				sgtl5000: codec@0a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
+					clock-frequency = <26000000>;
+					VDDA-supply = <&vdig_reg>;
+					VDDIO-supply = <&vvideo_reg>;
 				};
 			};
 
-			fec@83fec000 {
+			audmux@83fd0000 {
+				status = "okay";
+			};
+
+			ethernet@83fec000 {
 				phy-mode = "mii";
 				status = "okay";
 			};
@@ -218,4 +226,18 @@
 			gpio-key,wakeup;
 		};
 	};
+
+	sound {
+		compatible = "fsl,imx51-babbage-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx51-babbage-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
 };

arch/arm/boot/dts/imx51.dtsi

@@ -86,7 +86,7 @@
 					status = "disabled";
 				};
 
-				uart3: uart@7000c000 {
+				uart3: serial@7000c000 {
 					compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 					reg = <0x7000c000 0x4000>;
 					interrupts = <33>;
@@ -102,6 +102,15 @@
 					status = "disabled";
 				};
 
+				ssi2: ssi@70014000 {
+					compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+					reg = <0x70014000 0x4000>;
+					interrupts = <30>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+					status = "disabled";
+				};
+
 				esdhc@70020000 { /* ESDHC3 */
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
@@ -171,14 +180,14 @@
 				status = "disabled";
 			};
 
-			uart1: uart@73fbc000 {
+			uart1: serial@73fbc000 {
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fbc000 0x4000>;
 				interrupts = <31>;
 				status = "disabled";
 			};
 
-			uart2: uart@73fc0000 {
+			uart2: serial@73fc0000 {
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fc0000 0x4000>;
 				interrupts = <32>;
@@ -235,7 +244,31 @@
 				status = "disabled";
 			};
 
-			fec@83fec000 {
+			ssi1: ssi@83fcc000 {
+				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+				reg = <0x83fcc000 0x4000>;
+				interrupts = <29>;
+				fsl,fifo-depth = <15>;
+				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+				status = "disabled";
+			};
+
+			audmux@83fd0000 {
+				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
+				reg = <0x83fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			ssi3: ssi@83fe8000 {
+				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+				reg = <0x83fe8000 0x4000>;
+				interrupts = <96>;
+				fsl,fifo-depth = <15>;
+				fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
+				status = "disabled";
+			};
+
+			ethernet@83fec000 {
 				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;

arch/arm/boot/dts/imx53-ard.dts

@@ -17,10 +17,6 @@
 	model = "Freescale i.MX53 Automotive Reference Design Board";
 	compatible = "fsl,imx53-ard", "fsl,imx53";
 
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
 	memory {
 		reg = <0x70000000 0x40000000>;
 	};
@@ -44,7 +40,7 @@
 				reg = <0x53fa8000 0x4000>;
 			};
 
-			uart1: uart@53fbc000 {
+			uart1: serial@53fbc000 {
 				status = "okay";
 			};
 		};

arch/arm/boot/dts/imx53-evk.dts

@@ -17,10 +17,6 @@
 	model = "Freescale i.MX53 Evaluation Kit";
 	compatible = "fsl,imx53-evk", "fsl,imx53";
 
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
 	memory {
 		reg = <0x70000000 0x80000000>;
 	};
@@ -75,7 +71,7 @@
 				reg = <0x53fa8000 0x4000>;
 			};
 
-			uart1: uart@53fbc000 {
+			uart1: serial@53fbc000 {
 				status = "okay";
 			};
 		};
@@ -99,7 +95,7 @@
 				};
 			};
 
-			fec@63fec000 {
+			ethernet@63fec000 {
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";

arch/arm/boot/dts/imx53-qsb.dts

@@ -17,10 +17,6 @@
 	model = "Freescale i.MX53 Quick Start Board";
 	compatible = "fsl,imx53-qsb", "fsl,imx53";
 
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
 	memory {
 		reg = <0x70000000 0x40000000>;
 	};
@@ -33,6 +29,11 @@
 					status = "okay";
 				};
 
+				ssi2: ssi@50014000 {
+					fsl,mode = "i2s-slave";
+					status = "okay";
+				};
+
 				esdhc@50020000 { /* ESDHC3 */
 					cd-gpios = <&gpio3 11 0>;
 					wp-gpios = <&gpio3 12 0>;
@@ -49,7 +50,7 @@
 				reg = <0x53fa8000 0x4000>;
 			};
 
-			uart1: uart@53fbc000 {
+			uart1: serial@53fbc000 {
 				status = "okay";
 			};
 		};
@@ -62,9 +63,11 @@
 			i2c@63fc4000 { /* I2C2 */
 				status = "okay";
 
-				codec: sgtl5000@0a {
+				sgtl5000: codec@0a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
+					VDDA-supply = <&reg_3p2v>;
+					VDDIO-supply = <&reg_3p2v>;
 				};
 			};
 
@@ -77,12 +80,88 @@
 				};
 
 				pmic: dialog@48 {
-					compatible = "dialog,da9053", "dialog,da9052";
+					compatible = "dlg,da9053-aa", "dlg,da9052";
 					reg = <0x48>;
+
+					regulators {
+						buck0 {
+							regulator-min-microvolt = <500000>;
+							regulator-max-microvolt = <2075000>;
+						};
+
+						buck1 {
+							regulator-min-microvolt = <500000>;
+							regulator-max-microvolt = <2075000>;
+						};
+
+						buck2 {
+							regulator-min-microvolt = <925000>;
+					                regulator-max-microvolt = <2500000>;
+						};
+
+						buck3 {
+							regulator-min-microvolt = <925000>;
+					                regulator-max-microvolt = <2500000>;
+						};
+
+						ldo4 {
+							regulator-min-microvolt = <600000>;
+							regulator-max-microvolt = <1800000>;
+						};
+
+						ldo5 {
+							regulator-min-microvolt = <600000>;
+					                regulator-max-microvolt = <1800000>;
+						};
+
+						ldo6 {
+							regulator-min-microvolt = <1725000>;
+					                regulator-max-microvolt = <3300000>;
+						};
+
+						ldo7 {
+							regulator-min-microvolt = <1725000>;
+					                regulator-max-microvolt = <3300000>;
+						};
+
+						ldo8 {
+							regulator-min-microvolt = <1200000>;
+					                regulator-max-microvolt = <3600000>;
+						};
+
+						ldo9 {
+							regulator-min-microvolt = <1200000>;
+					                regulator-max-microvolt = <3600000>;
+						};
+
+						ldo10 {
+							regulator-min-microvolt = <1200000>;
+					                regulator-max-microvolt = <3600000>;
+						};
+
+						ldo11 {
+							regulator-min-microvolt = <1200000>;
+					                regulator-max-microvolt = <3600000>;
+						};
+
+						ldo12 {
+							regulator-min-microvolt = <1250000>;
+					                regulator-max-microvolt = <3650000>;
+						};
+
+						ldo13 {
+							regulator-min-microvolt = <1200000>;
+					                regulator-max-microvolt = <3600000>;
+						};
+					};
 				};
 			};
 
-			fec@63fec000 {
+			audmux@63fd0000 {
+				status = "okay";
+			};
+
+			ethernet@63fec000 {
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";
@@ -122,4 +201,30 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p2v: 3p2v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
 };