MLK-16973-2 drm/panel: simple: Add support for JDI TX26D202VM0BWA panel

This patch adds support for Japan Display Inc. 10.1" TX26D202VM0BWA
WUXGA(1920x1200) TFT LCD panel with LVDS interface.
The panel has dual LVDS channels.

Signed-off-by: Liu Ying <victor.liu@nxp.com>

drivers/gpu/drm/panel/panel-simple.c

@@ -1213,6 +1213,42 @@ static const struct panel_desc innolux_zj070na_01p = {
 	},
 };
 
+static const struct display_timing jdi_tx26d202vm0bwa_timing = {
+	.pixelclock = { 151820000, 156720000, 159780000 },
+	.hactive = { 1920, 1920, 1920 },
+	.hfront_porch = { 76, 100, 112 },
+	.hback_porch = { 74, 100, 112 },
+	.hsync_len = { 30, 30, 30 },
+	.vactive = { 1200, 1200, 1200},
+	.vfront_porch = { 3, 5, 10 },
+	.vback_porch = { 2, 5, 10 },
+	.vsync_len = { 5, 5, 5 },
+	.flags = DISPLAY_FLAGS_DE_LOW,
+};
+
+static const struct panel_desc jdi_tx26d202vm0bwa = {
+	.timings = &jdi_tx26d202vm0bwa_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 217,
+		.height = 136,
+	},
+	.delay = {
+		/*
+		 * The panel spec recommends one second delay
+		 * to the below items.  However, it's a bit too
+		 * long in pratical.  Based on tests, it turns
+		 * out 100 milliseconds is fine.
+		 */
+		.prepare = 100,
+		.enable = 100,
+		.unprepare = 100,
+		.disable = 100,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+};
+
 static const struct display_timing kyo_tcg121xglp_timing = {
 	.pixelclock = { 52000000, 65000000, 71000000 },
 	.hactive = { 1024, 1024, 1024 },
@@ -2039,6 +2075,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "innolux,zj070na-01p",
 		.data = &innolux_zj070na_01p,
+	}, {
+		.compatible = "jdi,tx26d202vm0bwa",
+		.data = &jdi_tx26d202vm0bwa,
 	}, {
 		.compatible = "kyo,tcg121xglp",
 		.data = &kyo_tcg121xglp,