treewide: Fix typo in Kconfig

Correct spelling typo in Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

arch/arm/mach-at91/Kconfig.non_dt

@@ -241,7 +241,7 @@ config MACH_PCONTROL_G20
 	bool "PControl G20 CPU module"
 	help
 	  Select this if you are using taskit's Stamp9G20 CPU module on this
-	  carrier board, beeing the decentralized unit of a building automation
+	  carrier board, being the decentralized unit of a building automation
 	  system; featuring nvram, eth-switch, iso-rs485, display, io
 
 config MACH_GSIA18S

arch/x86/Kconfig

@@ -948,7 +948,7 @@ config X86_ANCIENT_MCE
 	depends on X86_32 && X86_MCE
 	---help---
 	  Include support for machine check handling on old Pentium 5 or WinChip
-	  systems. These typically need to be enabled explicitely on the command
+	  systems. These typically need to be enabled explicitly on the command
 	  line.
 
 config X86_MCE_THRESHOLD

drivers/isdn/mISDN/Kconfig

@@ -17,7 +17,7 @@ config MISDN_DSP
 
 	  This module may be used for special applications that require
 	  cross connecting of bchannels, conferencing, dtmf decoding,
-	  echo cancelation, tone generation, and Blowfish encryption and
+	  echo cancellation, tone generation, and Blowfish encryption and
 	  decryption. It may use hardware features if available.
 
 	  E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu

drivers/scsi/Kconfig

@@ -204,9 +204,9 @@ config SCSI_MULTI_LUN
 	  Some devices support more than one LUN (Logical Unit Number) in order
 	  to allow access to several media, e.g. CD jukebox, USB card reader,
 	  mobile phone in mass storage mode. This option forces the kernel to
-	  probe for all LUNs by default. This setting can be overriden by
+	  probe for all LUNs by default. This setting can be overridden by
 	  max_luns boot/module parameter. Note that this option does not affect
-	  devices conforming to SCSI-3 or higher as they can explicitely report
+	  devices conforming to SCSI-3 or higher as they can explicitly report
 	  their number of LUNs. It is safe to say Y here unless you have one of
 	  those rare devices which reacts in an unexpected way when probed for
 	  multiple LUNs.

drivers/xen/Kconfig

@@ -223,7 +223,7 @@ config XEN_ACPI_PROCESSOR
 
 	  To do that the driver parses the Power Management data and uploads
 	  said information to the Xen hypervisor. Then the Xen hypervisor can
-	  select the proper Cx and Pxx states. It also registers itslef as the
+	  select the proper Cx and Pxx states. It also registers itself as the
 	  SMM so that other drivers (such as ACPI cpufreq scaling driver) will
 	  not load.
 

net/netfilter/ipset/Kconfig

@@ -21,7 +21,7 @@ config IP_SET_MAX
 	  You can define here default value of the maximum number 
 	  of IP sets for the kernel.
 
-	  The value can be overriden by the 'max_sets' module
+	  The value can be overridden by the 'max_sets' module
 	  parameter of the 'ip_set' module.
 
 config IP_SET_BITMAP_IP