MLK-20927 ARM64: dts: imx8dx: use separated irq for lpuart

i.MX8QXP has separated irq, and shared irq for lpuart with eDMA,
it is better for uart to use separated irq although there has
no function impact.

Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>

arch/arm64/boot/dts/freescale/fsl-imx8dx.dtsi

@@ -925,7 +925,7 @@
 				reg = <SC_R_UART_0>;
 				#power-domain-cells = <0>;
 				power-domains = <&pd_dma>;
-				wakeup-irq = <225>;
+				wakeup-irq = <345>;
 			};
 			pd_dma_lpuart1: PD_DMA_UART1 {
 				reg = <SC_R_UART_1>;
@@ -933,7 +933,7 @@
 				power-domains = <&pd_dma>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				wakeup-irq = <226>;
+				wakeup-irq = <346>;
 
 				pd_dma2_chan10: PD_UART1_RX {
 					reg = <SC_R_DMA_2_CH10>;
@@ -957,7 +957,7 @@
 				power-domains = <&pd_dma>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				wakeup-irq = <227>;
+				wakeup-irq = <347>;
 
 				pd_dma2_chan12: PD_UART2_RX {
 					reg = <SC_R_DMA_2_CH12>;
@@ -981,7 +981,7 @@
 				power-domains = <&pd_dma>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				wakeup-irq = <228>;
+				wakeup-irq = <348>;
 
 				pd_dma3_chan14: PD_UART3_RX {
 					reg = <SC_R_DMA_2_CH14>;
@@ -2698,7 +2698,7 @@
 	lpuart0: serial@5a060000 {
 		compatible = "fsl,imx8qm-lpuart";
 		reg = <0x0 0x5a060000 0x0 0x1000>;
-		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&wu>;
 		clocks = <&clk IMX8QXP_UART0_CLK>,
 			 <&clk IMX8QXP_UART0_IPG_CLK>;
@@ -2712,7 +2712,7 @@
 	lpuart1: serial@5a070000 {
 		compatible = "fsl,imx8qm-lpuart";
 		reg = <0x0 0x5a070000 0x0 0x1000>;
-		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&wu>;
 		clocks = <&clk IMX8QXP_UART1_CLK>,
 			<&clk IMX8QXP_UART1_IPG_CLK>;
@@ -2729,7 +2729,7 @@
 	lpuart2: serial@5a080000 {
 		compatible = "fsl,imx8qm-lpuart";
 		reg = <0x0 0x5a080000 0x0 0x1000>;
-		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&wu>;
 		clocks = <&clk IMX8QXP_UART2_CLK>,
 			<&clk IMX8QXP_UART2_IPG_CLK>;
@@ -2746,7 +2746,7 @@
 	lpuart3: serial@5a090000 {
 		compatible = "fsl,imx8qm-lpuart";
 		reg = <0x0 0x5a090000 0x0 0x1000>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&wu>;
 		clocks = <&clk IMX8QXP_UART3_CLK>,
 			<&clk IMX8QXP_UART3_IPG_CLK>;