Merge tag 'timers-core-2021-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Time and timer updates:

   - Instead of new drivers remove tango, sirf, u300 and atlas drivers

   - Add suspend/resume support for microchip pit64b

   - The usual fixes, improvements and cleanups here and there"

* tag 'timers-core-2021-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timens: Delete no-op time_ns_init()
  alarmtimer: Update kerneldoc
  clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume
  clocksource/drivers/prima: Remove sirf prima driver
  clocksource/drivers/atlas: Remove sirf atlas driver
  clocksource/drivers/tango: Remove tango driver
  clocksource/drivers/u300: Remove the u300 driver
  dt-bindings: timer: nuvoton: Clarify that interrupt of timer 0 should be specified
  clocksource/drivers/davinci: Move pr_fmt() before the includes
  clocksource/drivers/efm32: Drop unused timer code

Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt

@@ -6,8 +6,7 @@ timer counters.
 Required properties:
 - compatible      : "nuvoton,npcm750-timer" for Poleg NPCM750.
 - reg             : Offset and length of the register set for the device.
-- interrupts      : Contain the timer interrupt with flags for
-                    falling edge.
+- interrupts      : Contain the timer interrupt of timer 0.
 - clocks          : phandle of timer reference clock (usually a 25 MHz clock).
 
 Example:

Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt

-ST-Ericsson U300 apptimer
-
-Required properties:
-
-- compatible : should be "stericsson,u300-apptimer"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 4 interrupts; one for each subtimer. These
-  are, in order: OS (operating system), DD (device driver) both
-  adopted for EPOC/Symbian with two specific IRQs for these tasks,
-  then GP1 and GP2, which are general-purpose timers.
-
-Example:
-
-timer {
-	compatible = "stericsson,u300-apptimer";
-	reg = <0xc0014000 0x1000>;
-	interrupts = <24 25 26 27>;
-};

drivers/clocksource/Kconfig

@@ -197,12 +197,6 @@ config CLPS711X_TIMER
 	help
 	  Enables support for the Cirrus Logic PS711 timer.
 
-config ATLAS7_TIMER
-	bool "Atlas7 timer driver" if COMPILE_TEST
-	select CLKSRC_MMIO
-	help
-	  Enables support for the Atlas7 timer.
-
 config MXS_TIMER
 	bool "MXS timer driver" if COMPILE_TEST
 	select CLKSRC_MMIO
@@ -210,19 +204,6 @@ config MXS_TIMER
 	help
 	  Enables support for the MXS timer.
 
-config PRIMA2_TIMER
-	bool "Prima2 timer driver" if COMPILE_TEST
-	select CLKSRC_MMIO
-	help
-	  Enables support for the Prima2 timer.
-
-config U300_TIMER
-	bool "U300 timer driver" if COMPILE_TEST
-	depends on ARM
-	select CLKSRC_MMIO
-	help
-	  Enables support for the U300 timer.
-
 config NSPIRE_TIMER
 	bool "NSpire timer driver" if COMPILE_TEST
 	select CLKSRC_MMIO
@@ -242,15 +223,6 @@ config INTEGRATOR_AP_TIMER
 	help
 	  Enables support for the Integrator-AP timer.
 
-config CLKSRC_EFM32
-	bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32
-	depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST)
-	select CLKSRC_MMIO
-	default ARCH_EFM32
-	help
-	  Support to use the timers of EFM32 SoCs as clock source and clock
-	  event device.
-
 config CLKSRC_LPC32XX
 	bool "Clocksource for LPC32XX" if COMPILE_TEST
 	depends on HAS_IOMEM
@@ -567,14 +539,6 @@ config CLKSRC_MIPS_GIC
 	select CLOCKSOURCE_WATCHDOG
 	select TIMER_OF
 
-config CLKSRC_TANGO_XTAL
-	bool "Clocksource for Tango SoC" if COMPILE_TEST
-	depends on ARM
-	select TIMER_OF
-	select CLKSRC_MMIO
-	help
-	  This enables the clocksource for Tango SoC.
-
 config CLKSRC_PXA
 	bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST
 	depends on HAS_IOMEM

drivers/clocksource/Makefile

@@ -30,11 +30,8 @@ obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= timer-armada-370-xp.o
 obj-$(CONFIG_ORION_TIMER)	+= timer-orion.o
 obj-$(CONFIG_BCM2835_TIMER)	+= bcm2835_timer.o
 obj-$(CONFIG_CLPS711X_TIMER)	+= clps711x-timer.o
-obj-$(CONFIG_ATLAS7_TIMER)	+= timer-atlas7.o
 obj-$(CONFIG_MXS_TIMER)		+= mxs_timer.o
 obj-$(CONFIG_CLKSRC_PXA)	+= timer-pxa.o
-obj-$(CONFIG_PRIMA2_TIMER)	+= timer-prima2.o
-obj-$(CONFIG_U300_TIMER)	+= timer-u300.o
 obj-$(CONFIG_SUN4I_TIMER)	+= timer-sun4i.o
 obj-$(CONFIG_SUN5I_HSTIMER)	+= timer-sun5i.o
 obj-$(CONFIG_MESON6_TIMER)	+= timer-meson6.o
@@ -43,7 +40,6 @@ obj-$(CONFIG_VT8500_TIMER)	+= timer-vt8500.o
 obj-$(CONFIG_NSPIRE_TIMER)	+= timer-zevio.o
 obj-$(CONFIG_BCM_KONA_TIMER)	+= bcm_kona_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= timer-cadence-ttc.o
-obj-$(CONFIG_CLKSRC_EFM32)	+= timer-efm32.o
 obj-$(CONFIG_CLKSRC_STM32)	+= timer-stm32.o
 obj-$(CONFIG_CLKSRC_STM32_LP)	+= timer-stm32-lp.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
@@ -73,7 +69,6 @@ obj-$(CONFIG_KEYSTONE_TIMER)		+= timer-keystone.o
 obj-$(CONFIG_INTEGRATOR_AP_TIMER)	+= timer-integrator-ap.o
 obj-$(CONFIG_CLKSRC_VERSATILE)		+= timer-versatile.o
 obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
-obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= timer-tango-xtal.o
 obj-$(CONFIG_CLKSRC_IMX_GPT)		+= timer-imx-gpt.o
 obj-$(CONFIG_CLKSRC_IMX_TPM)		+= timer-imx-tpm.o
 obj-$(CONFIG_TIMER_IMX_SYS_CTR)		+= timer-imx-sysctr.o

drivers/clocksource/timer-atlas7.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * System timer for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/cpu.h>
-#include <linux/bitops.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/sched_clock.h>
-
-#define SIRFSOC_TIMER_32COUNTER_0_CTRL			0x0000
-#define SIRFSOC_TIMER_32COUNTER_1_CTRL			0x0004
-#define SIRFSOC_TIMER_MATCH_0				0x0018
-#define SIRFSOC_TIMER_MATCH_1				0x001c
-#define SIRFSOC_TIMER_COUNTER_0				0x0048
-#define SIRFSOC_TIMER_COUNTER_1				0x004c
-#define SIRFSOC_TIMER_INTR_STATUS			0x0060
-#define SIRFSOC_TIMER_WATCHDOG_EN			0x0064
-#define SIRFSOC_TIMER_64COUNTER_CTRL			0x0068
-#define SIRFSOC_TIMER_64COUNTER_LO			0x006c
-#define SIRFSOC_TIMER_64COUNTER_HI			0x0070
-#define SIRFSOC_TIMER_64COUNTER_LOAD_LO			0x0074
-#define SIRFSOC_TIMER_64COUNTER_LOAD_HI			0x0078
-#define SIRFSOC_TIMER_64COUNTER_RLATCHED_LO		0x007c
-#define SIRFSOC_TIMER_64COUNTER_RLATCHED_HI		0x0080
-
-#define SIRFSOC_TIMER_REG_CNT 6
-
-static unsigned long atlas7_timer_rate;
-
-static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = {
-	SIRFSOC_TIMER_WATCHDOG_EN,
-	SIRFSOC_TIMER_32COUNTER_0_CTRL,
-	SIRFSOC_TIMER_32COUNTER_1_CTRL,
-	SIRFSOC_TIMER_64COUNTER_CTRL,
-	SIRFSOC_TIMER_64COUNTER_RLATCHED_LO,
-	SIRFSOC_TIMER_64COUNTER_RLATCHED_HI,
-};
-
-static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT];
-
-static void __iomem *sirfsoc_timer_base;
-
-/* disable count and interrupt */
-static inline void sirfsoc_timer_count_disable(int idx)
-{
-	writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) & ~0x7,
-		sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx);
-}
-
-/* enable count and interrupt */
-static inline void sirfsoc_timer_count_enable(int idx)
-{
-	writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) | 0x3,
-		sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx);
-}
-
-/* timer interrupt handler */
-static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *ce = dev_id;
-	int cpu = smp_processor_id();
-
-	/* clear timer interrupt */
-	writel_relaxed(BIT(cpu), sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
-
-	if (clockevent_state_oneshot(ce))
-		sirfsoc_timer_count_disable(cpu);
-
-	ce->event_handler(ce);
-
-	return IRQ_HANDLED;
-}
-
-/* read 64-bit timer counter */
-static u64 sirfsoc_timer_read(struct clocksource *cs)
-{
-	u64 cycles;
-
-	writel_relaxed((readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
-			BIT(0)) & ~BIT(1), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
-
-	cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_HI);
-	cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_LO);
-
-	return cycles;
-}
-
-static int sirfsoc_timer_set_next_event(unsigned long delta,
-	struct clock_event_device *ce)
-{
-	int cpu = smp_processor_id();
-
-	/* disable timer first, then modify the related registers */
-	sirfsoc_timer_count_disable(cpu);
-
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0 +
-		4 * cpu);
-	writel_relaxed(delta, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0 +
-		4 * cpu);
-
-	/* enable the tick */
-	sirfsoc_timer_count_enable(cpu);
-
-	return 0;
-}
-
-/* Oneshot is enabled in set_next_event */
-static int sirfsoc_timer_shutdown(struct clock_event_device *evt)
-{
-	sirfsoc_timer_count_disable(smp_processor_id());
-	return 0;
-}
-
-static void sirfsoc_clocksource_suspend(struct clocksource *cs)
-{
-	int i;
-
-	for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
-		sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
-}
-
-static void sirfsoc_clocksource_resume(struct clocksource *cs)
-{
-	int i;
-
-	for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++)
-		writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
-
-	writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2],
-		sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO);
-	writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1],
-		sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI);
-
-	writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
-		BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
-}
-
-static struct clock_event_device __percpu *sirfsoc_clockevent;
-
-static struct clocksource sirfsoc_clocksource = {
-	.name = "sirfsoc_clocksource",
-	.rating = 200,
-	.mask = CLOCKSOURCE_MASK(64),
-	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
-	.read = sirfsoc_timer_read,
-	.suspend = sirfsoc_clocksource_suspend,
-	.resume = sirfsoc_clocksource_resume,
-};
-
-static unsigned int sirfsoc_timer_irq, sirfsoc_timer1_irq;
-
-static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
-{
-	struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu);
-	unsigned int irq;
-	const char *name;
-
-	if (cpu == 0) {
-		irq = sirfsoc_timer_irq;
-		name = "sirfsoc_timer0";
-	} else {
-		irq = sirfsoc_timer1_irq;
-		name = "sirfsoc_timer1";
-	}
-
-	ce->irq = irq;
-	ce->name = "local_timer";
-	ce->features = CLOCK_EVT_FEAT_ONESHOT;
-	ce->rating = 200;
-	ce->set_state_shutdown = sirfsoc_timer_shutdown;
-	ce->set_state_oneshot = sirfsoc_timer_shutdown;
-	ce->tick_resume = sirfsoc_timer_shutdown;
-	ce->set_next_event = sirfsoc_timer_set_next_event;
-	clockevents_calc_mult_shift(ce, atlas7_timer_rate, 60);
-	ce->max_delta_ns = clockevent_delta2ns(-2, ce);
-	ce->max_delta_ticks = (unsigned long)-2;
-	ce->min_delta_ns = clockevent_delta2ns(2, ce);
-	ce->min_delta_ticks = 2;
-	ce->cpumask = cpumask_of(cpu);
-
-	BUG_ON(request_irq(ce->irq, sirfsoc_timer_interrupt,
-			   IRQF_TIMER | IRQF_NOBALANCING, name, ce));
-	irq_force_affinity(ce->irq, cpumask_of(cpu));
-
-	clockevents_register_device(ce);
-	return 0;
-}
-
-static int sirfsoc_local_timer_dying_cpu(unsigned int cpu)
-{
-	struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu);
-
-	sirfsoc_timer_count_disable(1);
-
-	if (cpu == 0)
-		free_irq(sirfsoc_timer_irq, ce);
-	else
-		free_irq(sirfsoc_timer1_irq, ce);
-	return 0;
-}
-
-static int __init sirfsoc_clockevent_init(void)
-{
-	sirfsoc_clockevent = alloc_percpu(struct clock_event_device);
-	BUG_ON(!sirfsoc_clockevent);
-
-	/* Install and invoke hotplug callbacks */
-	return cpuhp_setup_state(CPUHP_AP_MARCO_TIMER_STARTING,
-				 "clockevents/marco:starting",
-				 sirfsoc_local_timer_starting_cpu,
-				 sirfsoc_local_timer_dying_cpu);
-}
-
-/* initialize the kernel jiffy timer source */
-static int __init sirfsoc_atlas7_timer_init(struct device_node *np)
-{
-	struct clk *clk;
-
-	clk = of_clk_get(np, 0);
-	BUG_ON(IS_ERR(clk));
-
-	BUG_ON(clk_prepare_enable(clk));
-
-	atlas7_timer_rate = clk_get_rate(clk);
-
-	/* timer dividers: 0, not divided */
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
-
-	/* Initialize timer counters to 0 */
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO);
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI);
-	writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
-		BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0);
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_1);
-
-	/* Clear all interrupts */
-	writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
-
-	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, atlas7_timer_rate));
-
-	return sirfsoc_clockevent_init();
-}
-
-static int __init sirfsoc_of_timer_init(struct device_node *np)
-{
-	sirfsoc_timer_base = of_iomap(np, 0);
-	if (!sirfsoc_timer_base) {
-		pr_err("unable to map timer cpu registers\n");
-		return -ENXIO;
-	}
-
-	sirfsoc_timer_irq = irq_of_parse_and_map(np, 0);
-	if (!sirfsoc_timer_irq) {
-		pr_err("No irq passed for timer0 via DT\n");
-		return -EINVAL;
-	}
-
-	sirfsoc_timer1_irq = irq_of_parse_and_map(np, 1);
-	if (!sirfsoc_timer1_irq) {
-		pr_err("No irq passed for timer1 via DT\n");
-		return -EINVAL;
-	}
-
-	return sirfsoc_atlas7_timer_init(np);
-}
-TIMER_OF_DECLARE(sirfsoc_atlas7_timer, "sirf,atlas7-tick", sirfsoc_of_timer_init);

drivers/clocksource/timer-davinci.c

@@ -7,6 +7,8 @@
  * (with tiny parts adopted from code by Kevin Hilman <khilman@baylibre.com>)
  */
 
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
 #include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
@@ -17,9 +19,6 @@
 
 #include <clocksource/timer-davinci.h>
 
-#undef pr_fmt
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
 #define DAVINCI_TIMER_REG_TIM12			0x10
 #define DAVINCI_TIMER_REG_TIM34			0x14
 #define DAVINCI_TIMER_REG_PRD12			0x18

drivers/clocksource/timer-efm32.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-
-#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/clk.h>
-
-#define TIMERn_CTRL			0x00
-#define TIMERn_CTRL_PRESC(val)			(((val) & 0xf) << 24)
-#define TIMERn_CTRL_PRESC_1024			TIMERn_CTRL_PRESC(10)
-#define TIMERn_CTRL_CLKSEL(val)			(((val) & 0x3) << 16)
-#define TIMERn_CTRL_CLKSEL_PRESCHFPERCLK	TIMERn_CTRL_CLKSEL(0)
-#define TIMERn_CTRL_OSMEN			0x00000010
-#define TIMERn_CTRL_MODE(val)			(((val) & 0x3) <<  0)
-#define TIMERn_CTRL_MODE_UP			TIMERn_CTRL_MODE(0)
-#define TIMERn_CTRL_MODE_DOWN			TIMERn_CTRL_MODE(1)
-
-#define TIMERn_CMD			0x04
-#define TIMERn_CMD_START			0x00000001
-#define TIMERn_CMD_STOP				0x00000002
-
-#define TIMERn_IEN			0x0c
-#define TIMERn_IF			0x10
-#define TIMERn_IFS			0x14
-#define TIMERn_IFC			0x18
-#define TIMERn_IRQ_UF				0x00000002
-
-#define TIMERn_TOP			0x1c
-#define TIMERn_CNT			0x24
-
-struct efm32_clock_event_ddata {
-	struct clock_event_device evtdev;
-	void __iomem *base;
-	unsigned periodic_top;
-};
-
-static int efm32_clock_event_shutdown(struct clock_event_device *evtdev)
-{
-	struct efm32_clock_event_ddata *ddata =
-		container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
-
-	writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
-	return 0;
-}
-
-static int efm32_clock_event_set_oneshot(struct clock_event_device *evtdev)
-{
-	struct efm32_clock_event_ddata *ddata =
-		container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
-
-	writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
-	writel_relaxed(TIMERn_CTRL_PRESC_1024 |
-		       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
-		       TIMERn_CTRL_OSMEN |
-		       TIMERn_CTRL_MODE_DOWN,
-		       ddata->base + TIMERn_CTRL);
-	return 0;
-}
-
-static int efm32_clock_event_set_periodic(struct clock_event_device *evtdev)
-{
-	struct efm32_clock_event_ddata *ddata =
-		container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
-
-	writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
-	writel_relaxed(ddata->periodic_top, ddata->base + TIMERn_TOP);
-	writel_relaxed(TIMERn_CTRL_PRESC_1024 |
-		       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
-		       TIMERn_CTRL_MODE_DOWN,
-		       ddata->base + TIMERn_CTRL);
-	writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
-	return 0;
-}
-
-static int efm32_clock_event_set_next_event(unsigned long evt,
-					    struct clock_event_device *evtdev)
-{
-	struct efm32_clock_event_ddata *ddata =
-		container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
-
-	writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
-	writel_relaxed(evt, ddata->base + TIMERn_CNT);
-	writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
-
-	return 0;
-}
-
-static irqreturn_t efm32_clock_event_handler(int irq, void *dev_id)
-{
-	struct efm32_clock_event_ddata *ddata = dev_id;
-
-	writel_relaxed(TIMERn_IRQ_UF, ddata->base + TIMERn_IFC);
-
-	ddata->evtdev.event_handler(&ddata->evtdev);
-
-	return IRQ_HANDLED;
-}
-
-static struct efm32_clock_event_ddata clock_event_ddata = {
-	.evtdev = {
-		.name = "efm32 clockevent",
-		.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-		.set_state_shutdown = efm32_clock_event_shutdown,
-		.set_state_periodic = efm32_clock_event_set_periodic,
-		.set_state_oneshot = efm32_clock_event_set_oneshot,
-		.set_next_event = efm32_clock_event_set_next_event,
-		.rating = 200,
-	},
-};
-
-static int __init efm32_clocksource_init(struct device_node *np)
-{
-	struct clk *clk;
-	void __iomem *base;
-	unsigned long rate;
-	int ret;
-
-	clk = of_clk_get(np, 0);
-	if (IS_ERR(clk)) {
-		ret = PTR_ERR(clk);
-		pr_err("failed to get clock for clocksource (%d)\n", ret);
-		goto err_clk_get;
-	}
-
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		pr_err("failed to enable timer clock for clocksource (%d)\n",
-		       ret);
-		goto err_clk_enable;
-	}
-	rate = clk_get_rate(clk);
-
-	base = of_iomap(np, 0);
-	if (!base) {
-		ret = -EADDRNOTAVAIL;
-		pr_err("failed to map registers for clocksource\n");
-		goto err_iomap;
-	}
-
-	writel_relaxed(TIMERn_CTRL_PRESC_1024 |
-		       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
-		       TIMERn_CTRL_MODE_UP, base + TIMERn_CTRL);
-	writel_relaxed(TIMERn_CMD_START, base + TIMERn_CMD);
-
-	ret = clocksource_mmio_init(base + TIMERn_CNT, "efm32 timer",
-				    DIV_ROUND_CLOSEST(rate, 1024), 200, 16,
-				    clocksource_mmio_readl_up);
-	if (ret) {
-		pr_err("failed to init clocksource (%d)\n", ret);
-		goto err_clocksource_init;
-	}
-
-	return 0;
-
-err_clocksource_init:
-
-	iounmap(base);
-err_iomap:
-
-	clk_disable_unprepare(clk);
-err_clk_enable:
-
-	clk_put(clk);
-err_clk_get:
-
-	return ret;
-}
-
-static int __init efm32_clockevent_init(struct device_node *np)
-{
-	struct clk *clk;
-	void __iomem *base;
-	unsigned long rate;
-	int irq;
-	int ret;
-
-	clk = of_clk_get(np, 0);
-	if (IS_ERR(clk)) {
-		ret = PTR_ERR(clk);
-		pr_err("failed to get clock for clockevent (%d)\n", ret);
-		goto err_clk_get;
-	}
-
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		pr_err("failed to enable timer clock for clockevent (%d)\n",
-		       ret);
-		goto err_clk_enable;
-	}
-	rate = clk_get_rate(clk);
-
-	base = of_iomap(np, 0);
-	if (!base) {
-		ret = -EADDRNOTAVAIL;
-		pr_err("failed to map registers for clockevent\n");
-		goto err_iomap;
-	}
-
-	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		ret = -ENOENT;
-		pr_err("failed to get irq for clockevent\n");
-		goto err_get_irq;
-	}
-
-	writel_relaxed(TIMERn_IRQ_UF, base + TIMERn_IEN);
-
-	clock_event_ddata.base = base;
-	clock_event_ddata.periodic_top = DIV_ROUND_CLOSEST(rate, 1024 * HZ);
-
-	clockevents_config_and_register(&clock_event_ddata.evtdev,
-					DIV_ROUND_CLOSEST(rate, 1024),
-					0xf, 0xffff);
-
-	ret = request_irq(irq, efm32_clock_event_handler, IRQF_TIMER,
-			  "efm32 clockevent", &clock_event_ddata);
-	if (ret) {
-		pr_err("Failed setup irq\n");
-		goto err_setup_irq;
-	}
-
-	return 0;
-
-err_setup_irq:
-err_get_irq:
-
-	iounmap(base);
-err_iomap:
-
-	clk_disable_unprepare(clk);
-err_clk_enable:
-
-	clk_put(clk);
-err_clk_get:
-
-	return ret;
-}
-
-/*
- * This function asserts that we have exactly one clocksource and one
- * clock_event_device in the end.
- */
-static int __init efm32_timer_init(struct device_node *np)
-{
-	static int has_clocksource, has_clockevent;
-	int ret = 0;
-
-	if (!has_clocksource) {
-		ret = efm32_clocksource_init(np);
-		if (!ret) {
-			has_clocksource = 1;
-			return 0;
-		}
-	}
-
-	if (!has_clockevent) {
-		ret = efm32_clockevent_init(np);
-		if (!ret) {
-			has_clockevent = 1;
-			return 0;
-		}
-	}
-
-	return ret;
-}
-TIMER_OF_DECLARE(efm32compat, "efm32,timer", efm32_timer_init);
-TIMER_OF_DECLARE(efm32, "energymicro,efm32-timer", efm32_timer_init);

drivers/clocksource/timer-microchip-pit64b.c

@@ -71,10 +71,24 @@ struct mchp_pit64b_clkevt {
 	struct clock_event_device	clkevt;
 };
 
-#define to_mchp_pit64b_timer(x) \
+#define clkevt_to_mchp_pit64b_timer(x) \
 	((struct mchp_pit64b_timer *)container_of(x,\
 		struct mchp_pit64b_clkevt, clkevt))
 
+/**
+ * mchp_pit64b_clksrc - PIT64B clocksource data structure
+ * @timer: PIT64B timer
+ * @clksrc: clocksource
+ */
+struct mchp_pit64b_clksrc {
+	struct mchp_pit64b_timer	timer;
+	struct clocksource		clksrc;
+};
+
+#define clksrc_to_mchp_pit64b_timer(x) \
+	((struct mchp_pit64b_timer *)container_of(x,\
+		struct mchp_pit64b_clksrc, clksrc))
+
 /* Base address for clocksource timer. */
 static void __iomem *mchp_pit64b_cs_base;
 /* Default cycles for clockevent timer. */
@@ -116,6 +130,36 @@ static inline void mchp_pit64b_reset(struct mchp_pit64b_timer *timer,
 	writel_relaxed(MCHP_PIT64B_CR_START, timer->base + MCHP_PIT64B_CR);
 }
 
+static void mchp_pit64b_suspend(struct mchp_pit64b_timer *timer)
+{
+	writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
+	if (timer->mode & MCHP_PIT64B_MR_SGCLK)
+		clk_disable_unprepare(timer->gclk);
+	clk_disable_unprepare(timer->pclk);
+}
+
+static void mchp_pit64b_resume(struct mchp_pit64b_timer *timer)
+{
+	clk_prepare_enable(timer->pclk);
+	if (timer->mode & MCHP_PIT64B_MR_SGCLK)
+		clk_prepare_enable(timer->gclk);
+}
+
+static void mchp_pit64b_clksrc_suspend(struct clocksource *cs)
+{
+	struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs);
+
+	mchp_pit64b_suspend(timer);
+}
+
+static void mchp_pit64b_clksrc_resume(struct clocksource *cs)
+{
+	struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs);
+
+	mchp_pit64b_resume(timer);
+	mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
+}
+
 static u64 mchp_pit64b_clksrc_read(struct clocksource *cs)
 {
 	return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
@@ -128,7 +172,7 @@ static u64 mchp_pit64b_sched_read_clk(void)
 
 static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev)
 {
-	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
+	struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
 
 	writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
 
@@ -137,7 +181,7 @@ static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev)
 
 static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev)
 {
-	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
+	struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
 
 	mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_CONT,
 			  MCHP_PIT64B_IER_PERIOD);
@@ -148,7 +192,7 @@ static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev)
 static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
 					     struct clock_event_device *cedev)
 {
-	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
+	struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
 
 	mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT,
 			  MCHP_PIT64B_IER_PERIOD);
@@ -158,21 +202,16 @@ static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
 
 static void mchp_pit64b_clkevt_suspend(struct clock_event_device *cedev)
 {
-	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
+	struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
 
-	writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
-	if (timer->mode & MCHP_PIT64B_MR_SGCLK)
-		clk_disable_unprepare(timer->gclk);
-	clk_disable_unprepare(timer->pclk);
+	mchp_pit64b_suspend(timer);
 }
 
 static void mchp_pit64b_clkevt_resume(struct clock_event_device *cedev)
 {
-	struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
+	struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
 
-	clk_prepare_enable(timer->pclk);
-	if (timer->mode & MCHP_PIT64B_MR_SGCLK)
-		clk_prepare_enable(timer->gclk);
+	mchp_pit64b_resume(timer);
 }
 
 static irqreturn_t mchp_pit64b_interrupt(int irq, void *dev_id)
@@ -296,20 +335,37 @@ done:
 static int __init mchp_pit64b_init_clksrc(struct mchp_pit64b_timer *timer,
 					  u32 clk_rate)
 {
+	struct mchp_pit64b_clksrc *cs;
 	int ret;
 
+	cs = kzalloc(sizeof(*cs), GFP_KERNEL);
+	if (!cs)
+		return -ENOMEM;
+
 	mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
 
 	mchp_pit64b_cs_base = timer->base;
 
-	ret = clocksource_mmio_init(timer->base, MCHP_PIT64B_NAME, clk_rate,
-				    210, 64, mchp_pit64b_clksrc_read);
+	cs->timer.base = timer->base;
+	cs->timer.pclk = timer->pclk;
+	cs->timer.gclk = timer->gclk;
+	cs->timer.mode = timer->mode;
+	cs->clksrc.name = MCHP_PIT64B_NAME;
+	cs->clksrc.mask = CLOCKSOURCE_MASK(64);
+	cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+	cs->clksrc.rating = 210;
+	cs->clksrc.read = mchp_pit64b_clksrc_read;
+	cs->clksrc.suspend = mchp_pit64b_clksrc_suspend;
+	cs->clksrc.resume = mchp_pit64b_clksrc_resume;
+
+	ret = clocksource_register_hz(&cs->clksrc, clk_rate);
 	if (ret) {
 		pr_debug("clksrc: Failed to register PIT64B clocksource!\n");
 
 		/* Stop timer. */
 		writel_relaxed(MCHP_PIT64B_CR_SWRST,
 			       timer->base + MCHP_PIT64B_CR);
+		kfree(cs);
 
 		return ret;
 	}

drivers/clocksource/timer-prima2.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * System timer for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/bitops.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/sched_clock.h>
-
-#define PRIMA2_CLOCK_FREQ 1000000
-
-#define SIRFSOC_TIMER_COUNTER_LO	0x0000
-#define SIRFSOC_TIMER_COUNTER_HI	0x0004
-#define SIRFSOC_TIMER_MATCH_0		0x0008
-#define SIRFSOC_TIMER_MATCH_1		0x000C
-#define SIRFSOC_TIMER_MATCH_2		0x0010
-#define SIRFSOC_TIMER_MATCH_3		0x0014
-#define SIRFSOC_TIMER_MATCH_4		0x0018
-#define SIRFSOC_TIMER_MATCH_5		0x001C
-#define SIRFSOC_TIMER_STATUS		0x0020
-#define SIRFSOC_TIMER_INT_EN		0x0024
-#define SIRFSOC_TIMER_WATCHDOG_EN	0x0028
-#define SIRFSOC_TIMER_DIV		0x002C
-#define SIRFSOC_TIMER_LATCH		0x0030
-#define SIRFSOC_TIMER_LATCHED_LO	0x0034
-#define SIRFSOC_TIMER_LATCHED_HI	0x0038
-
-#define SIRFSOC_TIMER_WDT_INDEX		5
-
-#define SIRFSOC_TIMER_LATCH_BIT	 BIT(0)
-
-#define SIRFSOC_TIMER_REG_CNT 11
-
-static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = {
-	SIRFSOC_TIMER_MATCH_0, SIRFSOC_TIMER_MATCH_1, SIRFSOC_TIMER_MATCH_2,
-	SIRFSOC_TIMER_MATCH_3, SIRFSOC_TIMER_MATCH_4, SIRFSOC_TIMER_MATCH_5,
-	SIRFSOC_TIMER_INT_EN, SIRFSOC_TIMER_WATCHDOG_EN, SIRFSOC_TIMER_DIV,
-	SIRFSOC_TIMER_LATCHED_LO, SIRFSOC_TIMER_LATCHED_HI,
-};
-
-static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT];
-
-static void __iomem *sirfsoc_timer_base;
-
-/* timer0 interrupt handler */
-static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *ce = dev_id;
-
-	WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) &
-		BIT(0)));
-
-	/* clear timer0 interrupt */
-	writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
-
-	ce->event_handler(ce);
-
-	return IRQ_HANDLED;
-}
-
-/* read 64-bit timer counter */
-static u64 notrace sirfsoc_timer_read(struct clocksource *cs)
-{
-	u64 cycles;
-
-	/* latch the 64-bit timer counter */
-	writel_relaxed(SIRFSOC_TIMER_LATCH_BIT,
-		sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
-	cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI);
-	cycles = (cycles << 32) |
-		readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
-
-	return cycles;
-}
-
-static int sirfsoc_timer_set_next_event(unsigned long delta,
-	struct clock_event_device *ce)
-{
-	unsigned long now, next;
-
-	writel_relaxed(SIRFSOC_TIMER_LATCH_BIT,
-		sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
-	now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
-	next = now + delta;
-	writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0);
-	writel_relaxed(SIRFSOC_TIMER_LATCH_BIT,
-		sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
-	now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
-
-	return next - now > delta ? -ETIME : 0;
-}
-
-static int sirfsoc_timer_shutdown(struct clock_event_device *evt)
-{
-	u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-
-	writel_relaxed(val & ~BIT(0),
-		       sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-	return 0;
-}
-
-static int sirfsoc_timer_set_oneshot(struct clock_event_device *evt)
-{
-	u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-
-	writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-	return 0;
-}
-
-static void sirfsoc_clocksource_suspend(struct clocksource *cs)
-{
-	int i;
-
-	writel_relaxed(SIRFSOC_TIMER_LATCH_BIT,
-		sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
-
-	for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
-		sirfsoc_timer_reg_val[i] =
-			readl_relaxed(sirfsoc_timer_base +
-				sirfsoc_timer_reg_list[i]);
-}
-
-static void sirfsoc_clocksource_resume(struct clocksource *cs)
-{
-	int i;
-
-	for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++)
-		writel_relaxed(sirfsoc_timer_reg_val[i],
-			sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
-
-	writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2],
-		sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
-	writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1],
-		sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
-}
-
-static struct clock_event_device sirfsoc_clockevent = {
-	.name = "sirfsoc_clockevent",
-	.rating = 200,
-	.features = CLOCK_EVT_FEAT_ONESHOT,
-	.set_state_shutdown = sirfsoc_timer_shutdown,
-	.set_state_oneshot = sirfsoc_timer_set_oneshot,
-	.set_next_event = sirfsoc_timer_set_next_event,
-};
-
-static struct clocksource sirfsoc_clocksource = {
-	.name = "sirfsoc_clocksource",
-	.rating = 200,
-	.mask = CLOCKSOURCE_MASK(64),
-	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
-	.read = sirfsoc_timer_read,
-	.suspend = sirfsoc_clocksource_suspend,
-	.resume = sirfsoc_clocksource_resume,
-};
-
-/* Overwrite weak default sched_clock with more precise one */
-static u64 notrace sirfsoc_read_sched_clock(void)
-{
-	return sirfsoc_timer_read(NULL);
-}
-
-static void __init sirfsoc_clockevent_init(void)
-{
-	sirfsoc_clockevent.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&sirfsoc_clockevent, PRIMA2_CLOCK_FREQ,
-					2, -2);
-}
-
-/* initialize the kernel jiffy timer source */
-static int __init sirfsoc_prima2_timer_init(struct device_node *np)
-{
-	unsigned long rate;
-	unsigned int irq;
-	struct clk *clk;
-	int ret;
-
-	clk = of_clk_get(np, 0);
-	if (IS_ERR(clk)) {
-		pr_err("Failed to get clock\n");
-		return PTR_ERR(clk);
-	}
-
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		pr_err("Failed to enable clock\n");
-		return ret;
-	}
-
-	rate = clk_get_rate(clk);
-
-	if (rate < PRIMA2_CLOCK_FREQ || rate % PRIMA2_CLOCK_FREQ) {
-		pr_err("Invalid clock rate\n");
-		return -EINVAL;
-	}
-
-	sirfsoc_timer_base = of_iomap(np, 0);
-	if (!sirfsoc_timer_base) {
-		pr_err("unable to map timer cpu registers\n");
-		return -ENXIO;
-	}
-
-	irq = irq_of_parse_and_map(np, 0);
-
-	writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1,
-		sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
-	writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
-
-	ret = clocksource_register_hz(&sirfsoc_clocksource, PRIMA2_CLOCK_FREQ);
-	if (ret) {
-		pr_err("Failed to register clocksource\n");
-		return ret;
-	}
-
-	sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
-
-	ret = request_irq(irq, sirfsoc_timer_interrupt, IRQF_TIMER,
-			  "sirfsoc_timer0", &sirfsoc_clockevent);
-	if (ret) {
-		pr_err("Failed to setup irq\n");
-		return ret;
-	}
-
-	sirfsoc_clockevent_init();
-
-	return 0;
-}
-TIMER_OF_DECLARE(sirfsoc_prima2_timer,
-	"sirf,prima2-tick", sirfsoc_prima2_timer_init);

drivers/clocksource/timer-tango-xtal.c

-// SPDX-License-Identifier: GPL-2.0
-#include <linux/clocksource.h>
-#include <linux/sched_clock.h>
-#include <linux/of_address.h>
-#include <linux/printk.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-
-static void __iomem *xtal_in_cnt;
-static struct delay_timer delay_timer;
-
-static unsigned long notrace read_xtal_counter(void)
-{
-	return readl_relaxed(xtal_in_cnt);
-}
-
-static u64 notrace read_sched_clock(void)
-{
-	return read_xtal_counter();
-}
-
-static int __init tango_clocksource_init(struct device_node *np)
-{
-	struct clk *clk;
-	int xtal_freq, ret;
-
-	xtal_in_cnt = of_iomap(np, 0);
-	if (xtal_in_cnt == NULL) {
-		pr_err("%pOF: invalid address\n", np);
-		return -ENXIO;
-	}
-
-	clk = of_clk_get(np, 0);
-	if (IS_ERR(clk)) {
-		pr_err("%pOF: invalid clock\n", np);
-		return PTR_ERR(clk);
-	}
-
-	xtal_freq = clk_get_rate(clk);
-	delay_timer.freq = xtal_freq;
-	delay_timer.read_current_timer = read_xtal_counter;
-
-	ret = clocksource_mmio_init(xtal_in_cnt, "tango-xtal", xtal_freq, 350,
-				    32, clocksource_mmio_readl_up);
-	if (ret) {
-		pr_err("%pOF: registration failed\n", np);
-		return ret;
-	}
-
-	sched_clock_register(read_sched_clock, 32, xtal_freq);
-	register_current_timer_delay(&delay_timer);
-
-	return 0;
-}
-
-TIMER_OF_DECLARE(tango, "sigma,tick-counter", tango_clocksource_init);

drivers/clocksource/timer-u300.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * Timer COH 901 328, runs the OS timer interrupt.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-/* Generic stuff */
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-/*
- * APP side special timer registers
- * This timer contains four timers which can fire an interrupt each.
- * OS (operating system) timer @ 32768 Hz
- * DD (device driver) timer @ 1 kHz
- * GP1 (general purpose 1) timer @ 1MHz
- * GP2 (general purpose 2) timer @ 1MHz
- */
-
-/* Reset OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_ROST					(0x0000)
-#define U300_TIMER_APP_ROST_TIMER_RESET				(0x00000000)
-/* Enable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_EOST					(0x0004)
-#define U300_TIMER_APP_EOST_TIMER_ENABLE			(0x00000000)
-/* Disable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_DOST					(0x0008)
-#define U300_TIMER_APP_DOST_TIMER_DISABLE			(0x00000000)
-/* OS Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SOSTM					(0x000c)
-#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT			(0x00000001)
-/* OS Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTS					(0x0010)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_OSTS_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_OSTS_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND			(0x00000080)
-/* OS Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTCC					(0x0014)
-/* OS Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_OSTTC					(0x0018)
-/* OS Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIE					(0x001c)
-#define U300_TIMER_APP_OSTIE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_OSTIE_IRQ_ENABLE				(0x00000001)
-/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIA					(0x0020)
-#define U300_TIMER_APP_OSTIA_IRQ_ACK				(0x00000080)
-
-/* Reset DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_RDDT					(0x0040)
-#define U300_TIMER_APP_RDDT_TIMER_RESET				(0x00000000)
-/* Enable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_EDDT					(0x0044)
-#define U300_TIMER_APP_EDDT_TIMER_ENABLE			(0x00000000)
-/* Disable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_DDDT					(0x0048)
-#define U300_TIMER_APP_DDDT_TIMER_DISABLE			(0x00000000)
-/* DD Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SDDTM					(0x004c)
-#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT			(0x00000001)
-/* DD Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTS					(0x0050)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_DDTS_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_DDTS_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND			(0x00000080)
-/* DD Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTCC					(0x0054)
-/* DD Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_DDTTC					(0x0058)
-/* DD Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIE					(0x005c)
-#define U300_TIMER_APP_DDTIE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_DDTIE_IRQ_ENABLE				(0x00000001)
-/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIA					(0x0060)
-#define U300_TIMER_APP_DDTIA_IRQ_ACK				(0x00000080)
-
-/* Reset GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT1					(0x0080)
-#define U300_TIMER_APP_RGPT1_TIMER_RESET			(0x00000000)
-/* Enable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT1					(0x0084)
-#define U300_TIMER_APP_EGPT1_TIMER_ENABLE			(0x00000000)
-/* Disable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT1					(0x0088)
-#define U300_TIMER_APP_DGPT1_TIMER_DISABLE			(0x00000000)
-/* GP1 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT1M					(0x008c)
-#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT			(0x00000001)
-/* GP1 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1S					(0x0090)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_GPT1S_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_GPT1S_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND			(0x00000080)
-/* GP1 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1CC					(0x0094)
-/* GP1 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT1TC					(0x0098)
-/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IE					(0x009c)
-#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE			(0x00000001)
-/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IA					(0x00a0)
-#define U300_TIMER_APP_GPT1IA_IRQ_ACK				(0x00000080)
-
-/* Reset GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT2					(0x00c0)
-#define U300_TIMER_APP_RGPT2_TIMER_RESET			(0x00000000)
-/* Enable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT2					(0x00c4)
-#define U300_TIMER_APP_EGPT2_TIMER_ENABLE			(0x00000000)
-/* Disable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT2					(0x00c8)
-#define U300_TIMER_APP_DGPT2_TIMER_DISABLE			(0x00000000)
-/* GP2 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT2M					(0x00cc)
-#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT			(0x00000001)
-/* GP2 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2S					(0x00d0)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_GPT2S_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_GPT2S_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND			(0x00000080)
-/* GP2 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2CC					(0x00d4)
-/* GP2 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT2TC					(0x00d8)
-/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IE					(0x00dc)
-#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE			(0x00000001)
-/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IA					(0x00e0)
-#define U300_TIMER_APP_GPT2IA_IRQ_ACK				(0x00000080)
-
-/* Clock request control register - all four timers */
-#define U300_TIMER_APP_CRC					(0x100)
-#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE			(0x00000001)
-
-static void __iomem *u300_timer_base;
-
-struct u300_clockevent_data {
-	struct clock_event_device cevd;
-	unsigned ticks_per_jiffy;
-};
-
-static int u300_shutdown(struct clock_event_device *evt)
-{
-	/* Disable interrupts on GP1 */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Disable GP1 */
-	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_DGPT1);
-	return 0;
-}
-
-/*
- * If we have oneshot timer active, the oneshot scheduling function
- * u300_set_next_event() is called immediately after.
- */
-static int u300_set_oneshot(struct clock_event_device *evt)
-{
-	/* Just return; here? */
-	/*
-	 * The actual event will be programmed by the next event hook,
-	 * so we just set a dummy value somewhere at the end of the
-	 * universe here.
-	 */
-	/* Disable interrupts on GPT1 */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Disable GP1 while we're reprogramming it. */
-	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_DGPT1);
-	/*
-	 * Expire far in the future, u300_set_next_event() will be
-	 * called soon...
-	 */
-	writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
-	/* We run one shot per tick here! */
-	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
-	       u300_timer_base + U300_TIMER_APP_SGPT1M);
-	/* Enable interrupts for this timer */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Enable timer */
-	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-	       u300_timer_base + U300_TIMER_APP_EGPT1);
-	return 0;
-}
-
-static int u300_set_periodic(struct clock_event_device *evt)
-{
-	struct u300_clockevent_data *cevdata =
-		container_of(evt, struct u300_clockevent_data, cevd);
-
-	/* Disable interrupts on GPT1 */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Disable GP1 while we're reprogramming it. */
-	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_DGPT1);
-	/*
-	 * Set the periodic mode to a certain number of ticks per
-	 * jiffy.
-	 */
-	writel(cevdata->ticks_per_jiffy,
-	       u300_timer_base + U300_TIMER_APP_GPT1TC);
-	/*
-	 * Set continuous mode, so the timer keeps triggering
-	 * interrupts.
-	 */
-	writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
-	       u300_timer_base + U300_TIMER_APP_SGPT1M);
-	/* Enable timer interrupts */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Then enable the OS timer again */
-	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-	       u300_timer_base + U300_TIMER_APP_EGPT1);
-	return 0;
-}
-
-/*
- * The app timer in one shot mode obviously has to be reprogrammed
- * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
- * the interrupt disable + timer disable commands with a reset command,
- * it will fail miserably. Apparently (and I found this the hard way)
- * the timer is very sensitive to the instruction order, though you don't
- * get that impression from the data sheet.
- */
-static int u300_set_next_event(unsigned long cycles,
-			       struct clock_event_device *evt)
-
-{
-	/* Disable interrupts on GPT1 */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Disable GP1 while we're reprogramming it. */
-	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-	       u300_timer_base + U300_TIMER_APP_DGPT1);
-	/* Reset the General Purpose timer 1. */
-	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
-	       u300_timer_base + U300_TIMER_APP_RGPT1);
-	/* IRQ in n * cycles */
-	writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC);
-	/*
-	 * We run one shot per tick here! (This is necessary to reconfigure,
-	 * the timer will tilt if you don't!)
-	 */
-	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
-	       u300_timer_base + U300_TIMER_APP_SGPT1M);
-	/* Enable timer interrupts */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-	       u300_timer_base + U300_TIMER_APP_GPT1IE);
-	/* Then enable the OS timer again */
-	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-	       u300_timer_base + U300_TIMER_APP_EGPT1);
-	return 0;
-}
-
-static struct u300_clockevent_data u300_clockevent_data = {
-	/* Use general purpose timer 1 as clock event */
-	.cevd = {
-		.name			= "GPT1",
-		/* Reasonably fast and accurate clock event */
-		.rating			= 300,
-		.features		= CLOCK_EVT_FEAT_PERIODIC |
-					  CLOCK_EVT_FEAT_ONESHOT,
-		.set_next_event		= u300_set_next_event,
-		.set_state_shutdown	= u300_shutdown,
-		.set_state_periodic	= u300_set_periodic,
-		.set_state_oneshot	= u300_set_oneshot,
-	},
-};
-
-/* Clock event timer interrupt handler */
-static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &u300_clockevent_data.cevd;
-	/* ACK/Clear timer IRQ for the APP GPT1 Timer */
-
-	writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
-		u300_timer_base + U300_TIMER_APP_GPT1IA);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
- */
-
-static u64 notrace u300_read_sched_clock(void)
-{
-	return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
-}
-
-static unsigned long u300_read_current_timer(void)
-{
-	return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
-}
-
-static struct delay_timer u300_delay_timer;
-
-/*
- * This sets up the system timers, clock source and clock event.
- */
-static int __init u300_timer_init_of(struct device_node *np)
-{
-	unsigned int irq;
-	struct clk *clk;
-	unsigned long rate;
-	int ret;
-
-	u300_timer_base = of_iomap(np, 0);
-	if (!u300_timer_base) {
-		pr_err("could not ioremap system timer\n");
-		return -ENXIO;
-	}
-
-	/* Get the IRQ for the GP1 timer */
-	irq = irq_of_parse_and_map(np, 2);
-	if (!irq) {
-		pr_err("no IRQ for system timer\n");
-		return -EINVAL;
-	}
-
-	pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
-
-	/* Clock the interrupt controller */
-	clk = of_clk_get(np, 0);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	ret = clk_prepare_enable(clk);
-	if (ret)
-		return ret;
-
-	rate = clk_get_rate(clk);
-
-	u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
-
-	sched_clock_register(u300_read_sched_clock, 32, rate);
-
-	u300_delay_timer.read_current_timer = &u300_read_current_timer;
-	u300_delay_timer.freq = rate;
-	register_current_timer_delay(&u300_delay_timer);
-
-	/*
-	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
-	 * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
-	 */
-	writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
-		u300_timer_base + U300_TIMER_APP_CRC);
-	writel(U300_TIMER_APP_ROST_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_ROST);
-	writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
-		u300_timer_base + U300_TIMER_APP_DOST);
-	writel(U300_TIMER_APP_RDDT_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_RDDT);
-	writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
-		u300_timer_base + U300_TIMER_APP_DDDT);
-
-	/* Reset the General Purpose timer 1. */
-	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_RGPT1);
-
-	/* Set up the IRQ handler */
-	ret = request_irq(irq, u300_timer_interrupt,
-			  IRQF_TIMER | IRQF_IRQPOLL, "U300 Timer Tick", NULL);
-	if (ret)
-		return ret;
-
-	/* Reset the General Purpose timer 2 */
-	writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
-		u300_timer_base + U300_TIMER_APP_RGPT2);
-	/* Set this timer to run around forever */
-	writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC);
-	/* Set continuous mode so it wraps around */
-	writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
-	       u300_timer_base + U300_TIMER_APP_SGPT2M);
-	/* Disable timer interrupts */
-	writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
-		u300_timer_base + U300_TIMER_APP_GPT2IE);
-	/* Then enable the GP2 timer to use as a free running us counter */
-	writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
-		u300_timer_base + U300_TIMER_APP_EGPT2);
-
-	/* Use general purpose timer 2 as clock source */
-	ret = clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC,
-				    "GPT2", rate, 300, 32, clocksource_mmio_readl_up);
-	if (ret) {
-		pr_err("timer: failed to initialize U300 clock source\n");
-		return ret;
-	}
-
-	/* Configure and register the clockevent */
-	clockevents_config_and_register(&u300_clockevent_data.cevd, rate,
-					1, 0xffffffff);
-
-	/*
-	 * TODO: init and register the rest of the timers too, they can be
-	 * used by hrtimers!
-	 */
-	return 0;
-}
-
-TIMER_OF_DECLARE(u300_timer, "stericsson,u300-apptimer",
-		       u300_timer_init_of);

kernel/time/alarmtimer.c

@@ -527,8 +527,11 @@ static enum alarmtimer_type clock2alarm(clockid_t clockid)
 /**
  * alarm_handle_timer - Callback for posix timers
  * @alarm: alarm that fired
+ * @now: time at the timer expiration
  *
  * Posix timer callback for expired alarm timers.
+ *
+ * Return: whether the timer is to be restarted
  */
 static enum alarmtimer_restart alarm_handle_timer(struct alarm *alarm,
 							ktime_t now)
@@ -715,8 +718,11 @@ static int alarm_timer_create(struct k_itimer *new_timer)
 /**
  * alarmtimer_nsleep_wakeup - Wakeup function for alarm_timer_nsleep
  * @alarm: ptr to alarm that fired
+ * @now: time at the timer expiration
  *
  * Wakes up the task that set the alarmtimer
+ *
+ * Return: ALARMTIMER_NORESTART
  */
 static enum alarmtimer_restart alarmtimer_nsleep_wakeup(struct alarm *alarm,
 								ktime_t now)
@@ -733,6 +739,7 @@ static enum alarmtimer_restart alarmtimer_nsleep_wakeup(struct alarm *alarm,
  * alarmtimer_do_nsleep - Internal alarmtimer nsleep implementation
  * @alarm: ptr to alarmtimer
  * @absexp: absolute expiration time
+ * @type: alarm type (BOOTTIME/REALTIME).
  *
  * Sets the alarm timer and sleeps until it is fired or interrupted.
  */
@@ -806,7 +813,6 @@ static long __sched alarm_timer_nsleep_restart(struct restart_block *restart)
  * @which_clock: clockid
  * @flags: determins abstime or relative
  * @tsreq: requested sleep time (abs or rel)
- * @rmtp: remaining sleep time saved
  *
  * Handles clock_nanosleep calls against _ALARM clockids
  */

kernel/time/namespace.c

@@ -465,9 +465,3 @@ struct time_namespace init_time_ns = {
 	.ns.ops		= &timens_operations,
 	.frozen_offsets	= true,
 };
-
-static int __init time_ns_init(void)
-{
-	return 0;
-}
-subsys_initcall(time_ns_init);