[D18][DTBO] Remove unsupported FG0700W0DS display overlay

The FG0700W0DS isn't officially supported.

MODV-75

arch/arm64/boot/dts/seco/overlays/Makefile

@@ -43,7 +43,6 @@ dtbo-$(CONFIG_ARCH_MXC) += \
 	seco-imx8mp-d18-lvds-fhd.dtbo\
 	seco-imx8mp-d18-lvds-wvga-ne070nb04f.dtbo\
 	seco-imx8mp-d18-lvds-wvga-umsh8596md.dtbo\
-	seco-imx8mp-d18-lvds-fg0700w0dsswagl1.dtbo\
 	seco-imx8mp-d18-lvds-g101ean02.dtbo\
 	seco-imx8mp-d18-ov5640-csi0-revA.dtbo\
 	seco-imx8mp-d18-ov5640-csi1-revA.dtbo\

arch/arm64/boot/dts/seco/overlays/seco-imx8mp-d18-lvds-fg0700w0dsswagl1-overlay.dts

-/*
- * Copyright 2024 SECO
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include "../include/imx8mp-pinfunc.h"
-
-/dts-v1/;
-/plugin/;
-
-/ {
-	compatible = "fsl,imx8mp-evk", "seco,imx8mp-d18", "fsl,imx8mp";
-
-/*  __________________________________________________________________________
- * |                                                                          |
- * |                         FG0700W0DSSWAGL1 for D18                         |
- * |__________________________________________________________________________|
- */
-
-	fragment@0 {
-		target-path = "/";
-		__overlay__ {
-			panel_lvds: lvds_panel {
-				status = "okay";
-				compatible = "panel-lvds";
-				data-mapping = "vesa-24";
-				width-mm = <154>;
-				height-mm = <86>;
-				/* See hogging group in base DT for display_enable_pinctrl */
-				enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-				backlight = <&pwm_backlight>;
-
-				panel-timing {
-					clock-frequency = <51206400>;
-					hactive = <1024>;
-					vactive = <600>;
-					hfront-porch = <159>;
-					hsync-len = <2>;
-					hback-porch = <159>;
-					vfront-porch = <17>;
-					vsync-len = <1>;
-					vback-porch = <17>;
-				};
-
-				port {
-					panel_lvds1_in: endpoint {
-						remote-endpoint = <&lvds1_out>;
-					};
-				};
-			};
-
-			pwm_backlight: pwm_backlight {
-				compatible = "pwm-backlight";
-				status = "okay";
-				/* See hogging group in base DT for backlight_enable_pinctrl */
-				enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-				pwms = <&pwm1 0 100000 0>;
-				brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-						     10 11 12 13 14 15 16 17 18 19
-						     20 21 22 23 24 25 26 27 28 29
-						     30 31 32 33 34 35 36 37 38 39
-						     40 41 42 43 44 45 46 47 48 49
-						     50 51 52 53 54 55 56 57 58 59
-						     60 61 62 63 64 65 66 67 68 69
-						     70 71 72 73 74 75 76 77 78 79
-						     80 81 82 83 84 85 86 87 88 89
-						     90 91 92 93 94 95 96 97 98 99
-						    100>;
-				default-brightness-level = <75>;
-			};
-		};
-	};
-
-	fragment@1 {
-		target = <&ldb>;
-		__overlay__ {
-			status = "okay";
-
-			lvds-channel@0 {
-				status = "okay";
-				fsl,data-mapping = "spwg";
-				fsl,data-width = <24>;
-
-				port@1 {
-					reg = <1>;
-					lvds1_out: endpoint {
-						remote-endpoint = <&panel_lvds1_in>;
-					};
-				};
-			};
-		};
-	};
-
-	fragment@2 {
-		target = <&lcdif2>;
-		__overlay__ {
-			status = "okay";
-		};
-	};
-
-	fragment@3 {
-		target = <&ldb_phy>;
-		__overlay__ {
-			status = "okay";
-		};
-	};
-
-	/*
-	 * The display_enable_pinctrl and backlight_enable_pinctrl are configured
-	 * in the hogging group of the base DT. Our preferred values are:
-	 * 
-	 * MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21      0x16 (display_enable)
-	 * MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06     0x16 (backlight_enable)
-	 */
-};