Merge branch 'sh/hwblk' into sh/pm-runtime

arch/sh/Kconfig

@@ -10,12 +10,16 @@ config SUPERH
 	select EMBEDDED
 	select HAVE_CLK
 	select HAVE_IDE
+	select HAVE_LMB
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IOREMAP_PROT if MMU
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_PERF_COUNTERS
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
 	select RTC_LIB
 	select GENERIC_ATOMIC64
 	help
@@ -31,6 +35,9 @@ config SUPERH32
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_FTRACE_SYSCALLS
+	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_ARCH_KGDB
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 

arch/sh/Kconfig.debug

@@ -38,11 +38,12 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
 				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
 				CPU_SUBTYPE_SH7343
-	default "0xffea0000" if CPU_SUBTYPE_SH7785
+	default "0xffeb0000" if CPU_SUBTYPE_SH7785
 	default "0xffeb0000" if CPU_SUBTYPE_SH7786
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
 	default "0xffe80000" if CPU_SH4
+	default "0xa4000150" if CPU_SH3
 	default "0x00000000"
 
 config EARLY_PRINTK
@@ -61,12 +62,14 @@ config EARLY_PRINTK
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
-config DEBUG_STACKOVERFLOW
+config STACK_DEBUG
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL && SUPERH32
 	help
 	  This option will cause messages to be printed if free stack space
-	  drops below a certain limit.
+	  drops below a certain limit. Saying Y here will add overhead to
+	  every function call and will therefore incur a major
+	  performance hit. Most users should say N.
 
 config DEBUG_STACK_USAGE
 	bool "Stack utilization instrumentation"
@@ -107,6 +110,14 @@ config DUMP_CODE
 
 	  Those looking for more verbose debugging output should say Y.
 
+config DWARF_UNWINDER
+	bool "Enable the DWARF unwinder for stacktraces"
+	select FRAME_POINTER
+	default n
+	help
+	  Enabling this option will make stacktraces more accurate, at
+	  the cost of an increase in overall kernel size.
+
 config SH_NO_BSS_INIT
 	bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
 	depends on DEBUG_KERNEL
@@ -123,4 +134,9 @@ config SH64_SR_WATCH
 	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
 	depends on SUPERH64
 
+config MCOUNT
+	def_bool y
+	depends on SUPERH32
+	depends on STACK_DEBUG || FUNCTION_TRACER
+
 endmenu

arch/sh/Makefile

@@ -136,6 +136,7 @@ machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
 machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
 machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
+machdir-$(CONFIG_SH_KFR2R09)			+= mach-kfr2r09
 machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
 machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
 machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
@@ -186,17 +187,27 @@ KBUILD_CFLAGS		+= -pipe $(cflags-y)
 KBUILD_CPPFLAGS		+= $(cflags-y)
 KBUILD_AFLAGS		+= $(cflags-y)
 
+ifeq ($(CONFIG_MCOUNT),y)
+  KBUILD_CFLAGS += -pg
+endif
+
+ifeq ($(CONFIG_DWARF_UNWINDER),y)
+  KBUILD_CFLAGS += -fasynchronous-unwind-tables
+endif
+
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
-PHONY += maketools FORCE
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
+	       zImage vmlinux.srec romImage
+PHONY += maketools $(BOOT_TARGETS) FORCE
 
 maketools:  include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
 
 all: $(KBUILD_IMAGE)
 
-zImage uImage uImage.srec vmlinux.srec: vmlinux
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 compressed: zImage
@@ -208,10 +219,14 @@ archclean:
 	$(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall
 
 define archhelp
-	@echo '* zImage 	           - Compressed kernel image'
+	@echo '  zImage 	           - Compressed kernel image'
+	@echo '  romImage	           - Compressed ROM image, if supported'
 	@echo '  vmlinux.srec	           - Create an ELF S-record'
-	@echo '  uImage  	           - Create a bootable image for U-Boot'
-	@echo '  uImage.srec  	           - Create an S-record for U-Boot'
+	@echo '* uImage  	           - Alias to bootable U-Boot image'
+	@echo '  uImage.srec	           - Create an S-record for U-Boot'
+	@echo '* uImage.gz	           - Kernel-only image for U-Boot (gzip)'
+	@echo '  uImage.bz2	           - Kernel-only image for U-Boot (bzip2)'
+	@echo '  uImage.lzma	           - Kernel-only image for U-Boot (lzma)'
 endef
 
 CLEAN_FILES += include/asm-sh/machtypes.h

arch/sh/boards/Kconfig

@@ -193,6 +193,13 @@ config SH_AP325RXA
 	  Renesas "AP-325RXA" support.
 	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
 
+config SH_KFR2R09
+	bool "KFR2R09"
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  "Kit For R2R for 2009" support.
+
 config SH_SH7763RDP
 	bool "SH7763RDP"
 	depends on CPU_SUBTYPE_SH7763

arch/sh/boards/board-ap325rxa.c

@@ -227,6 +227,9 @@ static struct platform_device lcdc_device = {
 	.dev		= {
 		.platform_data	= &lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 static void camera_power(int val)
@@ -377,6 +380,9 @@ static struct platform_device ceu_device = {
 	.dev		= {
 		.platform_data	= &sh_mobile_ceu_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU,
+	},
 };
 
 struct spi_gpio_platform_data sdcard_cn3_platform_data = {

arch/sh/boards/mach-highlander/setup.c

@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
@@ -60,6 +61,11 @@ static struct platform_device r8a66597_usb_host_device = {
 	.resource	= r8a66597_usb_host_resources,
 };
 
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
 static struct resource m66592_usb_peripheral_resources[] = {
 	[0] = {
 		.name	= "m66592_udc",
@@ -81,6 +87,7 @@ static struct platform_device m66592_usb_peripheral_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
 	.resource	= m66592_usb_peripheral_resources,

arch/sh/boards/mach-kfr2r09/Makefile

+obj-y	 := setup.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC)	+=  lcd_wqvga.o

arch/sh/boards/mach-kfr2r09/lcd_wqvga.c

+/*
+ * KFR2R09 LCD panel support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * Register settings based on the out-of-tree t33fb.c driver
+ * Copyright (C) 2008 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <mach/kfr2r09.h>
+#include <cpu/sh7724.h>
+
+/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
+ * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
+ * communicating with the main port of the LCDC using an 18-bit SYS interface.
+ *
+ * The device code for this LCD module is 0x01221517.
+ */
+
+static const unsigned char data_frame_if[] = {
+	0x02, /* WEMODE: 1=cont, 0=one-shot */
+	0x00, 0x00,
+	0x00, /* EPF, DFM */
+	0x02, /* RIM[1] : 1 (18bpp) */
+};
+
+static const unsigned char data_panel[] = {
+	0x0b,
+	0x63, /* 400 lines */
+	0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
+};
+
+static const unsigned char data_timing[] = {
+	0x00, 0x00, 0x13, 0x08, 0x08,
+};
+
+static const unsigned char data_timing_src[] = {
+	0x11, 0x01, 0x00, 0x01,
+};
+
+static const unsigned char data_gamma[] = {
+	0x01, 0x02, 0x08, 0x23,	0x03, 0x0c, 0x00, 0x06,	0x00, 0x00,
+	0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
+};
+
+static const unsigned char data_power[] = {
+	0x07, 0xc5, 0xdc, 0x02,	0x33, 0x0a,
+};
+
+static unsigned long read_reg(void *sohandle,
+			      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	return so->read_data(sohandle);
+}
+
+static void write_reg(void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so,
+		      int i, unsigned long v)
+{
+	if (i)
+		so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
+	else
+		so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
+}
+
+static void write_data(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so,
+		       unsigned char const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i++)
+		write_reg(sohandle, so, 1, data[i]);
+}
+
+static unsigned long read_device_code(void *sohandle,
+				      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long device_code;
+
+	/* access protect OFF */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* deep standby OFF */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* device code command */
+	write_reg(sohandle, so, 0, 0xbf);
+	mdelay(50);
+
+	/* dummy read */
+	read_reg(sohandle, so);
+
+	/* read device code */
+	device_code = ((read_reg(sohandle, so) & 0xff) << 24);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
+	device_code |= (read_reg(sohandle, so) & 0xff);
+
+	return device_code;
+}
+
+static void write_memory_start(void *sohandle,
+			       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	write_reg(sohandle, so, 0, 0x2c);
+}
+
+static void clear_memory(void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	int i;
+
+	/* write start */
+	write_memory_start(sohandle, so);
+
+	/* paint it black */
+	for (i = 0; i < (240 * 400); i++)
+		write_reg(sohandle, so, 1, 0x00);
+}
+
+static void display_on(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* access protect off */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* exit deep standby mode */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* frame memory I/F */
+	write_reg(sohandle, so, 0, 0xb3);
+	write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
+
+	/* display mode and frame memory write mode */
+	write_reg(sohandle, so, 0, 0xb4);
+	write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
+
+	/* panel */
+	write_reg(sohandle, so, 0, 0xc0);
+	write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
+
+	/* timing (normal) */
+	write_reg(sohandle, so, 0, 0xc1);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (partial) */
+	write_reg(sohandle, so, 0, 0xc2);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (idle) */
+	write_reg(sohandle, so, 0, 0xc3);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (source/VCOM/gate driving) */
+	write_reg(sohandle, so, 0, 0xc4);
+	write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
+
+	/* gamma (red) */
+	write_reg(sohandle, so, 0, 0xc8);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (green) */
+	write_reg(sohandle, so, 0, 0xc9);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (blue) */
+	write_reg(sohandle, so, 0, 0xca);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* power (common) */
+	write_reg(sohandle, so, 0, 0xd0);
+	write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
+
+	/* VCOM */
+	write_reg(sohandle, so, 0, 0xd1);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x0f);
+	write_reg(sohandle, so, 1, 0x02);
+
+	/* power (normal) */
+	write_reg(sohandle, so, 0, 0xd2);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (partial) */
+	write_reg(sohandle, so, 0, 0xd3);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (idle) */
+	write_reg(sohandle, so, 0, 0xd4);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	write_reg(sohandle, so, 0, 0xd8);
+	write_reg(sohandle, so, 1, 0x77);
+	write_reg(sohandle, so, 1, 0x77);
+
+	/* TE signal */
+	write_reg(sohandle, so, 0, 0x35);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* TE signal line */
+	write_reg(sohandle, so, 0, 0x44);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* column address */
+	write_reg(sohandle, so, 0, 0x2a);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0xef);
+
+	/* page address */
+	write_reg(sohandle, so, 0, 0x2b);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x01);
+	write_reg(sohandle, so, 1, 0x8f);
+
+	/* exit sleep mode */
+	write_reg(sohandle, so, 0, 0x11);
+
+	mdelay(120);
+
+	/* clear vram */
+	clear_memory(sohandle, so);
+
+	/* display ON */
+	write_reg(sohandle, so, 0, 0x29);
+	mdelay(1);
+
+	write_memory_start(sohandle, so);
+}
+
+int kfr2r09_lcd_setup(void *board_data, void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* power on */
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	gpio_set_value(GPIO_PTE4, 0);  /* LCD_RST/ -> L */
+	gpio_set_value(GPIO_PTF4, 1);  /* PROTECT/ -> H */
+	udelay(1100);
+	gpio_set_value(GPIO_PTE4, 1);  /* LCD_RST/ -> H */
+	udelay(10);
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	mdelay(20);
+
+	if (read_device_code(sohandle, so) != 0x01221517)
+		return -ENODEV;
+
+	pr_info("KFR2R09 WQVGA LCD Module detected.\n");
+
+	display_on(sohandle, so);
+	return 0;
+}
+
+#define CTRL_CKSW       0x10
+#define CTRL_C10        0x20
+#define CTRL_CPSW       0x80
+#define MAIN_MLED4      0x40
+#define MAIN_MSW        0x80
+
+static int kfr2r09_lcd_backlight(int on)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	buf[0] = 0x00;
+	if (on)
+		buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
+	else
+		buf[1] = 0;
+
+	msg.addr = 0x75;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0x01;
+	if (on)
+		buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
+	else
+		buf[1] = 0;
+
+	msg.addr = 0x75;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+void kfr2r09_lcd_on(void *board_data)
+{
+	kfr2r09_lcd_backlight(1);
+}
+
+void kfr2r09_lcd_off(void *board_data)
+{
+	kfr2r09_lcd_backlight(0);
+}

arch/sh/boards/mach-kfr2r09/setup.c

+/*
+ * KFR2R09 board support code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <video/sh_mobile_lcdc.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/sh_keysc.h>
+#include <cpu/sh7724.h>
+#include <mach/kfr2r09.h>
+
+static struct mtd_partition kfr2r09_nor_flash_partitions[] =
+{
+	{
+		.name = "boot",
+		.offset = 0,
+		.size = (4 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data kfr2r09_nor_flash_data = {
+	.width		= 2,
+	.parts		= kfr2r09_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(kfr2r09_nor_flash_partitions),
+};
+
+static struct resource kfr2r09_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= kfr2r09_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nor_flash_resources),
+	.dev		= {
+		.platform_data = &kfr2r09_nor_flash_data,
+	},
+};
+
+static struct resource kfr2r09_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x10000000,
+		.end		= 0x1001ffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nand_flash_device = {
+	.name		= "onenand-flash",
+	.resource	= kfr2r09_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nand_flash_resources),
+};
+
+static struct sh_keysc_info kfr2r09_sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 10,
+	.keycodes = {
+		KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
+		KEY_1, KEY_2, KEY_3, 0, KEY_UP,
+		KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
+		KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
+		KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
+		0, 0, 0, 0, 0
+	},
+};
+
+static struct resource kfr2r09_sh_keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
+	.resource       = kfr2r09_sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_keysc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
+};
+
+static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = SYS18,
+		.clock_divider = 6,
+		.flags = LCDC_FLAGS_DWPOL,
+		.lcd_cfg = {
+			.name = "TX07D34VM0AAA",
+			.xres = 240,
+			.yres = 400,
+			.left_margin = 0,
+			.right_margin = 16,
+			.hsync_len = 8,
+			.upper_margin = 0,
+			.lower_margin = 1,
+			.vsync_len = 1,
+			.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		},
+		.lcd_size_cfg = {
+			.width = 35,
+			.height = 58,
+		},
+		.board_cfg = {
+			.setup_sys = kfr2r09_lcd_setup,
+			.display_on = kfr2r09_lcd_on,
+			.display_off = kfr2r09_lcd_off,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x07010904,
+			.ldmt3r = 0x14012914,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
+		},
+	}
+};
+
+static struct resource kfr2r09_sh_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
+	.resource	= kfr2r09_sh_lcdc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_lcdc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
+};
+
+static struct platform_device *kfr2r09_devices[] __initdata = {
+	&kfr2r09_nor_flash_device,
+	&kfr2r09_nand_flash_device,
+	&kfr2r09_sh_keysc_device,
+	&kfr2r09_sh_lcdc_device,
+};
+
+#define BSC_CS0BCR 0xfec10004
+#define BSC_CS0WCR 0xfec10024
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS4WCR 0xfec10030
+
+static int __init kfr2r09_devices_setup(void)
+{
+	/* enable SCIF1 serial port for YC401 console support */
+	gpio_request(GPIO_FN_SCIF1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+
+	/* setup NOR flash at CS0 */
+	ctrl_outl(0x36db0400, BSC_CS0BCR);
+	ctrl_outl(0x00000500, BSC_CS0WCR);
+
+	/* setup NAND flash at CS4 */
+	ctrl_outl(0x36db0400, BSC_CS4BCR);
+	ctrl_outl(0x00000500, BSC_CS4WCR);
+
+	/* setup KEYSC pins */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN0, NULL);
+	gpio_request(GPIO_FN_KEYIN1, NULL);
+	gpio_request(GPIO_FN_KEYIN2, NULL);
+	gpio_request(GPIO_FN_KEYIN3, NULL);
+	gpio_request(GPIO_FN_KEYIN4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
+	/* setup LCDC pins for SYS panel */
+	gpio_request(GPIO_FN_LCDD17, NULL);
+	gpio_request(GPIO_FN_LCDD16, NULL);
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
+	gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
+	gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
+	gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
+	gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
+	gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
+	gpio_direction_output(GPIO_PTE4, 1);
+	gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
+	gpio_direction_output(GPIO_PTF4, 1);
+	gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
+	gpio_direction_output(GPIO_PTU0, 1);
+
+	return platform_add_devices(kfr2r09_devices,
+				    ARRAY_SIZE(kfr2r09_devices));
+}
+device_initcall(kfr2r09_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int kfr2r09_mode_pins(void)
+{
+	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * MD8=1: Test Mode Disabled
+	 */
+	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_kfr2r09 __initmv = {
+	.mv_name		= "kfr2r09",
+	.mv_mode_pins		= kfr2r09_mode_pins,
+};

arch/sh/boards/mach-migor/setup.c

@@ -98,6 +98,9 @@ static struct platform_device sh_keysc_device = {
 	.dev	= {
 		.platform_data	= &sh_keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 static struct mtd_partition migor_nor_flash_partitions[] =
@@ -292,6 +295,9 @@ static struct platform_device migor_lcdc_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 static struct clk *camera_clk;
@@ -379,6 +385,9 @@ static struct platform_device migor_ceu_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU,
+	},
 };
 
 struct spi_gpio_platform_data sdcard_cn9_platform_data = {

arch/sh/boards/mach-se/7722/setup.c

@@ -22,6 +22,7 @@
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_keysc.h>
+#include <cpu/sh7722.h>
 
 /* Heartbeat */
 static struct heartbeat_data heartbeat_data = {
@@ -137,6 +138,9 @@ static struct platform_device sh_keysc_device = {
 	.dev	= {
 		.platform_data	= &sh_keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 static struct platform_device *se7722_devices[] __initdata = {

arch/sh/boards/mach-se/7724/setup.c

@@ -39,7 +39,15 @@
  * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
  *                          1 : Digital monitor
  *                      b = 0 : VGA
- *                          1 : SVGA
+ *                          1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
  */
 
 /* Heartbeat */
@@ -174,6 +182,9 @@ static struct platform_device lcdc_device = {
 	.dev		= {
 		.platform_data	= &lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 /* CEU0 */
@@ -205,6 +216,9 @@ static struct platform_device ceu0_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu0_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU0,
+	},
 };
 
 /* CEU1 */
@@ -236,6 +250,9 @@ static struct platform_device ceu1_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu1_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU1,
+	},
 };
 
 /* KEYSC in SoC (Needs SW33-2 set to ON) */
@@ -274,6 +291,9 @@ static struct platform_device keysc_device = {
 	.dev	= {
 		.platform_data	= &keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 /* SH Eth */
@@ -302,9 +322,13 @@ static struct platform_device sh_eth_device = {
 	},
 	.num_resources = ARRAY_SIZE(sh_eth_resources),
 	.resource = sh_eth_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_ETHER,
+	},
 };
 
 static struct r8a66597_platdata sh7724_usb0_host_data = {
+	.on_chip = 1,
 };
 
 static struct resource sh7724_usb0_host_resources[] = {
@@ -330,6 +354,9 @@ static struct platform_device sh7724_usb0_host_device = {
 	},
 	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
 	.resource	= sh7724_usb0_host_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_USB0,
+	},
 };
 
 static struct platform_device *ms7724se_devices[] __initdata = {
@@ -421,6 +448,32 @@ static int __init devices_setup(void)
 	/* turn on USB clocks, use external clock */
 	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
 
+#ifdef CONFIG_PM
+	/* Let LED9 show STATUS2 */
+	gpio_request(GPIO_FN_STATUS2, NULL);
+
+	/* Lit LED10 show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit LED11 show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
+	/* Lit LED9 */
+	gpio_request(GPIO_PTJ6, NULL);
+	gpio_direction_output(GPIO_PTJ6, 1);
+	gpio_export(GPIO_PTJ6, 0);
+
+	/* Lit LED10 */
+	gpio_request(GPIO_PTJ5, NULL);
+	gpio_direction_output(GPIO_PTJ5, 1);
+	gpio_export(GPIO_PTJ5, 0);
+
+	/* Lit LED11 */
+	gpio_request(GPIO_PTJ7, NULL);
+	gpio_direction_output(GPIO_PTJ7, 1);
+	gpio_export(GPIO_PTJ7, 0);
+#endif
+
 	/* enable USB0 port */
 	ctrl_outw(0x0600, 0xa40501d4);
 
@@ -546,15 +599,15 @@ static int __init devices_setup(void)
 	sh_eth_init();
 
 	if (sw & SW41_B) {
-		/* SVGA */
-		lcdc_info.ch[0].lcd_cfg.xres         = 800;
-		lcdc_info.ch[0].lcd_cfg.yres         = 600;
-		lcdc_info.ch[0].lcd_cfg.left_margin  = 142;
-		lcdc_info.ch[0].lcd_cfg.right_margin = 52;
-		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
-		lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
-		lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
-		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+		/* 720p */
+		lcdc_info.ch[0].lcd_cfg.xres         = 1280;
+		lcdc_info.ch[0].lcd_cfg.yres         = 720;
+		lcdc_info.ch[0].lcd_cfg.left_margin  = 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len    = 40;
+		lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len    = 5;
 	} else {
 		/* VGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 640;

arch/sh/boards/mach-x3proto/setup.c

@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
@@ -89,6 +90,11 @@ static struct platform_device r8a66597_usb_host_device = {
 	.resource	= r8a66597_usb_host_resources,
 };
 
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
 static struct resource m66592_usb_peripheral_resources[] = {
 	[0] = {
 		.name	= "m66592_udc",
@@ -109,6 +115,7 @@ static struct platform_device m66592_usb_peripheral_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
 	.resource	= m66592_usb_peripheral_resources,

arch/sh/boot/.gitignore

 zImage
-vmlinux.srec
-uImage
-uImage.srec
+vmlinux*
+uImage*

arch/sh/boot/Makefile

@@ -20,8 +20,13 @@ CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
 CONFIG_ENTRY_OFFSET	?= 0x00001000
 
-targets := zImage vmlinux.srec uImage uImage.srec
-subdir- := compressed
+suffix-$(CONFIG_KERNEL_GZIP)  := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
+subdir- := compressed romimage
 
 $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -30,6 +35,13 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
+$(obj)/romImage: $(obj)/romimage/vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/romimage/vmlinux: $(obj)/zImage FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/romimage $@
+
 KERNEL_MEMORY := 0x00000000
 ifeq ($(CONFIG_PMB_FIXED),y)
 KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
@@ -40,9 +52,6 @@ KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_MEMORY_START)]')
 endif
 
-export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY
-
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(KERNEL_MEMORY) + \
@@ -55,19 +64,30 @@ KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
-		   -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
+		   -C $(2) -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
-$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,uimage)
-	@echo '  Image $@ is ready'
-
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2
+	$(call if_changed,uimage,bzip2)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
+	$(call if_changed,uimage,gzip)
+
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
+	$(call if_changed,uimage,lzma)
+
 OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
 $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
 	$(call if_changed,objcopy)
@@ -76,5 +96,9 @@ OBJCOPYFLAGS_uImage.srec := -I binary -O srec
 $(obj)/uImage.srec: $(obj)/uImage
 	$(call if_changed,objcopy)
 
-clean-files	+= uImage uImage.srec vmlinux.srec \
-		   vmlinux.bin vmlinux.bin.gz
+$(obj)/uImage: $(obj)/uImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
+	@echo '  Image $@ is ready'
+
+export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY suffix-y

arch/sh/boot/compressed/.gitignore

+vmlinux.bin.*

arch/sh/boot/compressed/Makefile

@@ -5,9 +5,10 @@
 #
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
-		   head_$(BITS).o misc_$(BITS).o piggy.o
+		   vmlinux.bin.bz2 vmlinux.bin.lzma \
+		   head_$(BITS).o misc.o piggy.o
 
-OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o
+OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
 
 ifdef CONFIG_SH_STANDARD_BIOS
 OBJECTS += $(obj)/../../kernel/sh_bios.o
@@ -23,7 +24,7 @@ IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
 
 LIBGCC	:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ifeq ($(CONFIG_MCOUNT),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
@@ -38,10 +39,18 @@ $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+vmlinux.bin.all-y := $(obj)/vmlinux.bin
+
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,lzma)
 
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,as_o_S)
+LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
+	$(call if_changed,ld)

arch/sh/boot/compressed/misc_32.c → arch/sh/boot/compressed/misc.c

@@ -14,73 +14,26 @@
 #include <asm/uaccess.h>
 #include <asm/addrspace.h>
 #include <asm/page.h>
-#ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
-#endif
 
 /*
  * gzip declarations
  */
 
-#define OF(args)  args
 #define STATIC static
 
 #undef memset
 #undef memcpy
 #define memzero(s, n)     memset ((s), 0, (n))
 
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-static unsigned insize = 0;  /* valid bytes in inbuf */
-static unsigned inptr = 0;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int  fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
+/* cache.c */
+#define CACHE_ENABLE      0
+#define CACHE_DISABLE     1
+int cache_control(unsigned int command);
 
 extern char input_data[];
 extern int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
+static unsigned char *output;
 
 static void error(char *m);
 
@@ -91,9 +44,23 @@ extern int _end;
 static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
-#define HEAP_SIZE             0x10000
+#ifdef CONFIG_HAVE_KERNEL_BZIP2
+#define HEAP_SIZE	0x400000
+#else
+#define HEAP_SIZE	0x10000
+#endif
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
 
-#include "../../../../lib/inflate.c"
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
 
 #ifdef CONFIG_SH_STANDARD_BIOS
 size_t strlen(const char *s)
@@ -138,44 +105,6 @@ void* memcpy(void* __dest, __const void* __src,
 	return __dest;
 }
 
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	if (insize != 0) {
-		error("ran out of input data");
-	}
-
-	inbuf = input_data;
-	insize = input_len;
-	inptr = 1;
-	return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
-}
-
 static void error(char *x)
 {
 	puts("\n\n");
@@ -185,22 +114,36 @@ static void error(char *x)
 	while(1);	/* Halt */
 }
 
+#ifdef CONFIG_SUPERH64
+#define stackalign	8
+#else
+#define stackalign	4
+#endif
+
 #define STACK_SIZE (4096)
-long user_stack [STACK_SIZE];
-long* stack_start = &user_stack[STACK_SIZE];
+long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
+long *stack_start = &user_stack[STACK_SIZE];
 
 void decompress_kernel(void)
 {
-	output_data = NULL;
-	output_ptr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
+	unsigned long output_addr;
+
+#ifdef CONFIG_SUPERH64
+	output_addr = (CONFIG_MEMORY_START + 0x2000);
+#else
+	output_addr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
 #ifdef CONFIG_29BIT
-	output_ptr |= P2SEG;
+	output_addr |= P2SEG;
+#endif
 #endif
+
+	output = (unsigned char *)output_addr;
 	free_mem_ptr = (unsigned long)&_end;
 	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
 
-	makecrc();
 	puts("Uncompressing Linux... ");
-	gunzip();
+	cache_control(CACHE_ENABLE);
+	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
+	cache_control(CACHE_DISABLE);
 	puts("Ok, booting the kernel.\n");
 }

arch/sh/boot/compressed/misc_64.c

-/*
- * arch/sh/boot/compressed/misc_64.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for SHmedia from sh by Stuart Menefy, May 2002
- */
-
-#include <asm/uaccess.h>
-
-/* cache.c */
-#define CACHE_ENABLE      0
-#define CACHE_DISABLE     1
-int cache_control(unsigned int command);
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n)     memset ((s), 0, (n))
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;		/* input buffer */
-static uch window[WSIZE];	/* Sliding window buffer */
-
-static unsigned insize = 0;	/* valid bytes in inbuf */
-static unsigned inptr = 0;	/* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0;	/* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01	/* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02	/* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04	/* bit 2 set: extra field present */
-#define ORIG_NAME    0x08	/* bit 3 set: original file name present */
-#define COMMENT      0x10	/* bit 4 set: file comment present */
-#define ENCRYPTED    0x20	/* bit 5 set: file is encrypted */
-#define RESERVED     0xC0	/* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
-
-extern char input_data[];
-extern int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
-static void error(char *m);
-
-static void puts(const char *);
-
-extern int _text;		/* Defined in vmlinux.lds.S */
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#define HEAP_SIZE             0x10000
-
-#include "../../../../lib/inflate.c"
-
-void puts(const char *s)
-{
-}
-
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *) s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-	return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-	int i;
-	char *d = (char *) __dest, *s = (char *) __src;
-
-	for (i = 0; i < __n; i++)
-		d[i] = s[i];
-	return __dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	if (insize != 0) {
-		error("ran out of input data\n");
-	}
-
-	inbuf = input_data;
-	insize = input_len;
-	inptr = 1;
-	return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-	ulg c = crc;		/* temporary variable */
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out++ = *in++;
-		c = crc_32_tab[((int) c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg) outcnt;
-	output_ptr += (ulg) outcnt;
-	outcnt = 0;
-	puts(".");
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted");
-
-	while (1) ;		/* Halt */
-}
-
-#define STACK_SIZE (4096)
-long __attribute__ ((aligned(8))) user_stack[STACK_SIZE];
-long *stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
-	output_data = (uch *) (CONFIG_MEMORY_START + 0x2000);
-	free_mem_ptr = (unsigned long) &_end;
-	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
-	makecrc();
-	puts("Uncompressing Linux... ");
-	cache_control(CACHE_ENABLE);
-	gunzip();
-	puts("\n");
-
-#if 0
-	/* When booting from ROM may want to do something like this if the
-	 * boot loader doesn't.
-	 */
-
-	/* Set up the parameters and command line */
-	{
-		volatile unsigned int *parambase =
-		    (int *) (CONFIG_MEMORY_START + 0x1000);
-
-		parambase[0] = 0x1;	/* MOUNT_ROOT_RDONLY */
-		parambase[1] = 0x0;	/* RAMDISK_FLAGS */
-		parambase[2] = 0x0200;	/* ORIG_ROOT_DEV */
-		parambase[3] = 0x0;	/* LOADER_TYPE */
-		parambase[4] = 0x0;	/* INITRD_START */
-		parambase[5] = 0x0;	/* INITRD_SIZE */
-		parambase[6] = 0;
-
-		strcpy((char *) ((int) parambase + 0x100),
-		       "console=ttySC0,38400");
-	}
-#endif
-
-	puts("Ok, booting the kernel.\n");
-
-	cache_control(CACHE_DISABLE);
-}

arch/sh/boot/compressed/piggy.S

-	.global	input_len, input_data
-	.data
-input_len:
-	.long	input_data_end - input_data
-input_data:
-	.incbin	"arch/sh/boot/compressed/vmlinux.bin.gz"
-input_data_end:
-	.end