MIPS/SOUND: Alchemy: DB1200 AC97+I2S audio support.

Machine driver for DB1200 AC97 and I2S audio systems, intended as a proper
reference asoc machine for Alchemy-based systems.  AC97/I2S can be selected
at boot time by setting switch S6.7.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: alsa-devel@alsa-project.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/alchemy/devboards/db1200/platform.c

@@ -399,12 +399,43 @@ static struct platform_device db1200_spi_dev = {
 	.resource	= au1200_psc0_res,
 };
 
+static struct resource au1200_psc1_res[] = {
+	[0] = {
+		.start	= PSC1_PHYS_ADDR,
+		.end	= PSC1_PHYS_ADDR + 0x000fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_PSC1_INT,
+		.end	= AU1200_PSC1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= DSCR_CMD0_PSC1_TX,
+		.end	= DSCR_CMD0_PSC1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DSCR_CMD0_PSC1_RX,
+		.end	= DSCR_CMD0_PSC1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1200_audio_dev = {
+	/* name assigned later based on switch setting */
+	.id		= 1,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1200_psc1_res),
+	.resource	= au1200_psc1_res,
+};
+
 static struct platform_device *db1200_devs[] __initdata = {
 	NULL,		/* PSC0, selected by S6.8 */
 	&db1200_ide_dev,
 	&db1200_eth_dev,
 	&db1200_rtc_dev,
 	&db1200_nand_dev,
+	&db1200_audio_dev,
 };
 
 static int __init db1200_dev_init(void)
@@ -419,6 +450,7 @@ static int __init db1200_dev_init(void)
 				ARRAY_SIZE(db1200_i2c_devs));
 
 	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
+	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
 	 */
 
 	/* NOTE: GPIO215 controls OTG VBUS supply.  In SPI mode however
@@ -456,6 +488,25 @@ static int __init db1200_dev_init(void)
 	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
 	wmb();
 
+	/* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S!
+	 * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S
+	 */
+	sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7;
+	if (sw == BCSR_SWITCHES_DIP_8) {
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
+		db1200_audio_dev.name = "au1xpsc_i2s";
+		printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
+	} else {
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
+		db1200_audio_dev.name = "au1xpsc_ac97";
+		printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
+	}
+
+	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+		(void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+
 	db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
 				    PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
 				    PCMCIA_MEM_PSEUDO_PHYS,

sound/soc/au1x/Kconfig

@@ -22,11 +22,13 @@ config SND_SOC_AU1XPSC_AC97
 ##
 ## Boards
 ##
-config SND_SOC_SAMPLE_PSC_AC97
-	tristate "Sample Au12x0/Au1550 PSC AC97 sound machine"
+config SND_SOC_DB1200
+	tristate "DB1200 AC97+I2S audio support"
 	depends on SND_SOC_AU1XPSC
 	select SND_SOC_AU1XPSC_AC97
 	select SND_SOC_AC97_CODEC
+	select SND_SOC_AU1XPSC_I2S
+	select SND_SOC_WM8731
 	help
-	  This is a sample AC97 sound machine for use in Au12x0/Au1550
-	  based systems which have audio on PSC1 (e.g. Db1200 demoboard).
+	  Select this option to enable audio (AC97 or I2S) on the
+	  Alchemy/AMD/RMI DB1200 demoboard.

sound/soc/au1x/Makefile

@@ -8,6 +8,6 @@ obj-$(CONFIG_SND_SOC_AU1XPSC_I2S) += snd-soc-au1xpsc-i2s.o
 obj-$(CONFIG_SND_SOC_AU1XPSC_AC97) += snd-soc-au1xpsc-ac97.o
 
 # Boards
-snd-soc-sample-ac97-objs := sample-ac97.o
+snd-soc-db1200-objs := db1200.o
 
-obj-$(CONFIG_SND_SOC_SAMPLE_PSC_AC97) += snd-soc-sample-ac97.o
+obj-$(CONFIG_SND_SOC_DB1200) += snd-soc-db1200.o

sound/soc/au1x/db1200.c

+/*
+ * DB1200 ASoC audio fabric support code.
+ *
+ * (c) 2008-9 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../codecs/ac97.h"
+#include "../codecs/wm8731.h"
+#include "psc.h"
+
+/*-------------------------  AC97 PART  ---------------------------*/
+
+static struct snd_soc_dai_link db1200_ac97_dai = {
+	.name		= "AC97",
+	.stream_name	= "AC97 HiFi",
+	.cpu_dai	= &au1xpsc_ac97_dai,
+	.codec_dai	= &ac97_dai,
+};
+
+static struct snd_soc_card db1200_ac97_machine = {
+	.name		= "DB1200_AC97",
+	.dai_link	= &db1200_ac97_dai,
+	.num_links	= 1,
+	.platform	= &au1xpsc_soc_platform,
+};
+
+static struct snd_soc_device db1200_ac97_devdata = {
+	.card		= &db1200_ac97_machine,
+	.codec_dev	= &soc_codec_dev_ac97,
+};
+
+/*-------------------------  I2S PART  ---------------------------*/
+
+static int db1200_i2s_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	/* WM8731 has its own 12MHz crystal */
+	snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+				12000000, SND_SOC_CLOCK_IN);
+
+	/* codec is bitclock and lrclk master */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_LEFT_J |
+			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		goto out;
+
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_LEFT_J |
+			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		goto out;
+
+	ret = 0;
+out:
+	return ret;
+}
+
+static struct snd_soc_ops db1200_i2s_wm8731_ops = {
+	.startup	= db1200_i2s_startup,
+};
+
+static struct snd_soc_dai_link db1200_i2s_dai = {
+	.name		= "WM8731",
+	.stream_name	= "WM8731 PCM",
+	.cpu_dai	= &au1xpsc_i2s_dai,
+	.codec_dai	= &wm8731_dai,
+	.ops		= &db1200_i2s_wm8731_ops,
+};
+
+static struct snd_soc_card db1200_i2s_machine = {
+	.name		= "DB1200_I2S",
+	.dai_link	= &db1200_i2s_dai,
+	.num_links	= 1,
+	.platform	= &au1xpsc_soc_platform,
+};
+
+static struct snd_soc_device db1200_i2s_devdata = {
+	.card		= &db1200_i2s_machine,
+	.codec_dev	= &soc_codec_dev_wm8731,
+};
+
+/*-------------------------  COMMON PART  ---------------------------*/
+
+static struct platform_device *db1200_asoc_dev;
+
+static int __init db1200_audio_load(void)
+{
+	int ret;
+
+	ret = -ENOMEM;
+	db1200_asoc_dev = platform_device_alloc("soc-audio", -1);
+	if (!db1200_asoc_dev)
+		goto out;
+
+	/* DB1200 board setup set PSC1MUX to preferred audio device */
+	if (bcsr_read(BCSR_RESETS) & BCSR_RESETS_PSC1MUX)
+		platform_set_drvdata(db1200_asoc_dev, &db1200_i2s_devdata);
+	else
+		platform_set_drvdata(db1200_asoc_dev, &db1200_ac97_devdata);
+
+	db1200_ac97_devdata.dev = &db1200_asoc_dev->dev;
+	db1200_i2s_devdata.dev = &db1200_asoc_dev->dev;
+	ret = platform_device_add(db1200_asoc_dev);
+
+	if (ret) {
+		platform_device_put(db1200_asoc_dev);
+		db1200_asoc_dev = NULL;
+	}
+out:
+	return ret;
+}
+
+static void __exit db1200_audio_unload(void)
+{
+	platform_device_unregister(db1200_asoc_dev);
+}
+
+module_init(db1200_audio_load);
+module_exit(db1200_audio_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DB1200 ASoC audio support");
+MODULE_AUTHOR("Manuel Lauss");

sound/soc/au1x/sample-ac97.c

-/*
- * Sample Au12x0/Au1550 PSC AC97 sound machine.
- *
- * Copyright (c) 2007-2008 Manuel Lauss <mano@roarinelk.homelinux.net>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms outlined in the file COPYING at the root of this
- *  source archive.
- *
- * This is a very generic AC97 sound machine driver for boards which
- * have (AC97) audio at PSC1 (e.g. DB1200 demoboards).
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1xxx_psc.h>
-#include <asm/mach-au1x00/au1xxx_dbdma.h>
-
-#include "../codecs/ac97.h"
-#include "psc.h"
-
-static int au1xpsc_sample_ac97_init(struct snd_soc_codec *codec)
-{
-	snd_soc_dapm_sync(codec);
-	return 0;
-}
-
-static struct snd_soc_dai_link au1xpsc_sample_ac97_dai = {
-	.name		= "AC97",
-	.stream_name	= "AC97 HiFi",
-	.cpu_dai	= &au1xpsc_ac97_dai,	/* see psc-ac97.c */
-	.codec_dai	= &ac97_dai,		/* see codecs/ac97.c */
-	.init		= au1xpsc_sample_ac97_init,
-	.ops		= NULL,
-};
-
-static struct snd_soc_card au1xpsc_sample_ac97_machine = {
-	.name		= "Au1xxx PSC AC97 Audio",
-	.dai_link	= &au1xpsc_sample_ac97_dai,
-	.num_links	= 1,
-};
-
-static struct snd_soc_device au1xpsc_sample_ac97_devdata = {
-	.card		= &au1xpsc_sample_ac97_machine,
-	.platform	= &au1xpsc_soc_platform, /* see dbdma2.c */
-	.codec_dev	= &soc_codec_dev_ac97,
-};
-
-static struct resource au1xpsc_psc1_res[] = {
-	[0] = {
-		.start	= CPHYSADDR(PSC1_BASE_ADDR),
-		.end	= CPHYSADDR(PSC1_BASE_ADDR) + 0x000fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-#ifdef CONFIG_SOC_AU1200
-		.start	= AU1200_PSC1_INT,
-		.end	= AU1200_PSC1_INT,
-#elif defined(CONFIG_SOC_AU1550)
-		.start	= AU1550_PSC1_INT,
-		.end	= AU1550_PSC1_INT,
-#endif
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= DSCR_CMD0_PSC1_TX,
-		.end	= DSCR_CMD0_PSC1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DSCR_CMD0_PSC1_RX,
-		.end	= DSCR_CMD0_PSC1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device *au1xpsc_sample_ac97_dev;
-
-static int __init au1xpsc_sample_ac97_load(void)
-{
-	int ret;
-
-#ifdef CONFIG_SOC_AU1200
-	unsigned long io;
-
-	/* modify sys_pinfunc for AC97 on PSC1 */
-	io = au_readl(SYS_PINFUNC);
-	io |= SYS_PINFUNC_P1C;
-	io &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B);
-	au_writel(io, SYS_PINFUNC);
-	au_sync();
-#endif
-
-	ret = -ENOMEM;
-
-	/* setup PSC clock source for AC97 part: external clock provided
-	 * by codec.  The psc-ac97.c driver depends on this setting!
-	 */
-	au_writel(PSC_SEL_CLK_SERCLK, PSC1_BASE_ADDR + PSC_SEL_OFFSET);
-	au_sync();
-
-	au1xpsc_sample_ac97_dev = platform_device_alloc("soc-audio", -1);
-	if (!au1xpsc_sample_ac97_dev)
-		goto out;
-
-	au1xpsc_sample_ac97_dev->resource =
-		kmemdup(au1xpsc_psc1_res, sizeof(struct resource) *
-			ARRAY_SIZE(au1xpsc_psc1_res), GFP_KERNEL);
-	au1xpsc_sample_ac97_dev->num_resources = ARRAY_SIZE(au1xpsc_psc1_res);
-	au1xpsc_sample_ac97_dev->id = 1;
-
-	platform_set_drvdata(au1xpsc_sample_ac97_dev,
-			     &au1xpsc_sample_ac97_devdata);
-	au1xpsc_sample_ac97_devdata.dev = &au1xpsc_sample_ac97_dev->dev;
-	ret = platform_device_add(au1xpsc_sample_ac97_dev);
-
-	if (ret) {
-		platform_device_put(au1xpsc_sample_ac97_dev);
-		au1xpsc_sample_ac97_dev = NULL;
-	}
-
-out:
-	return ret;
-}
-
-static void __exit au1xpsc_sample_ac97_exit(void)
-{
-	platform_device_unregister(au1xpsc_sample_ac97_dev);
-}
-
-module_init(au1xpsc_sample_ac97_load);
-module_exit(au1xpsc_sample_ac97_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Au1xxx PSC sample AC97 machine");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");