From e65ad1e34b4c6056b1c158fe632fc0a7ce42ce0f Mon Sep 17 00:00:00 2001
From: Felix Gerking <felix.gerking@garz-fricke.com>
Date: Thu, 14 Dec 2017 16:46:32 +0000
Subject: [PATCH] Testscripts for EMV-Testsuite: Added/customized scripts for
the platforms Santaro,Satoka,Santino,Satino-LT, refs #29020
* Santaro
** Modified umount command in preparations: now no more errors occur when USB-Sticks/SD-Cards are mounted with different partitions
** Modified sleep command: time changed from 1 to 0.9 seconds, now it is consistent with the real-time measurement
* Santoka
** Commented out WiFi and Bluetooth commands: these are not tested by default
** Modified sleep command: same reason as above
* Santino
** Added EMV-Testscript: necessary to run the EMV-Testsuite
* Santion-LT
** Added EMV-Testscript: necessary to run the EMV-Testsuite
---
runtest/santaro | 13 ++++++++-----
runtest/santino | 45 +++++++++++++++++++++++++++++++++++++++++++
runtest/santino-lt | 48 ++++++++++++++++++++++++++++++++++++++++++++++
runtest/santoka | 18 ++++++++---------
4 files changed, 110 insertions(+), 14 deletions(-)
create mode 100755 runtest/santino
create mode 100755 runtest/santino-lt
diff --git a/runtest/santaro b/runtest/santaro
index cf4d9a1..a34ec58 100644
--- a/runtest/santaro
+++ b/runtest/santaro
@@ -17,10 +17,13 @@
# PREPARATION #
#-----------------------------------------------------------------------------#
Testimage_display FRAMEBUFFER=/dev/fb0 fbv -er /opt/ltp/images/guf_test_800x480.png < /dev/null
-Testimage_HDMI FRAMEBUFFER=/dev/fb2 fbv -er /opt/ltp/images/guf_test_800x480.png < /dev/null
-MMC_umount if grep /dev/mmcblk1p1 /proc/mounts; then umount /dev/mmcblk1p1; fi
-USB_stick_1_umount if grep /dev/sda /proc/mounts; then umount /dev/sda; fi
-USB_stick_2_umount if grep /dev/sdb /proc/mounts; then umount /dev/sdb; fi
+#Testimage_HDMI FRAMEBUFFER=/dev/fb2 fbv -er /opt/ltp/images/guf_test_800x480.png < /dev/null
+Testimage_HDMI hdmiconfig unblank; hdmiconfig set 1920 1080 60 16; sleep 3; FRAMEBUFFER=/dev/fb2 fbv -er /opt/ltp/images/guf_test_800x480.png < /dev/null
+MMC_umount for i in `mount | grep mmcblk1 | awk '{print $1}'`; do umount $i; done
+#MMC_umount if grep /dev/mmcblk1p1 /proc/mounts; then umount /dev/mmcblk1p1; fi
+USB_stick_umount for i in $(grep /dev/sd /proc/mounts | awk '{print $1}' ) ;do umount $i; done
+#USB_stick_1_umount if grep /dev/sda1 /proc/mounts; then umount /dev/sda1; fi
+#USB_stick_2_umount if grep /dev/sdb1 /proc/mounts; then umount /dev/sdb1; fi
Touchtest_remove_socket rm -f /touch_tst_socket
Touchtest_start touchmon -d -i /dev/input/event0 -s /touch_tst_socket -p 0
@@ -42,7 +45,7 @@ Serial0 serial -d /dev/ttymxc0 -q -b 115200 -fn -c 5 -s 1024
Serial1 serial -d /dev/ttymxc1 -q -b 115200 -fn -c 5 -s 1024 -o 300
RS4854 serial -d /dev/ttymxc2 -q -b 115200 -fn -c 5 -s 1024 -o 300
Touch touchmon -z -r /touch_tst_socket
-Wait sleep 1
+Wait sleep 0.9
#-----------------------------------------------------------------------------#
# CLEANUP #
diff --git a/runtest/santino b/runtest/santino
new file mode 100755
index 0000000..4e7cf41
--- /dev/null
+++ b/runtest/santino
@@ -0,0 +1,45 @@
+#-----------------------------------------------------------------------------#
+# DESCRIPTION #
+# ----------- #
+# This is a configuration file for the Garz & Fricke Built-In-Test Framework, #
+# which is implemented using tests from the LTP. Thus, the configuration file #
+# looks very similar to LTP configuration files and can actually be used by #
+# LTP. However, it should not, since there are slight differences: #
+# This file is divided into three sections: PREPARATION, TESTCASES and #
+# CLEANUP. Each section contains lines beginning with a name and ending with #
+# a command line. The command lines of the PREPARATION section are executed #
+# once at the start of the execution. Then, the command lines of the TEST- #
+# CASES section is looped for the given number of iterations. At the end, the #
+# commands of the CLEANUP section are run once. #
+#-----------------------------------------------------------------------------#
+
+#-----------------------------------------------------------------------------#
+# PREPARATION #
+#-----------------------------------------------------------------------------#
+Testimage_display FRAMEBUFFER=/dev/fb0 fbv -er /opt/ltp/images/guf_test_800x480.png < /dev/null
+MMC_umount for i in `mount | grep mmcblk1 | awk '{print $1}'`; do umount $i; done
+USB_stick_umount for i in $(grep /dev/sd /proc/mounts | awk '{print $1}' ) ;do umount $i; done
+Touchtest_remove_socket rm -f /touch_tst_socket
+Touchtest_start touchmon -d -i /dev/input/event0 -s /touch_tst_socket -p 0
+
+#-----------------------------------------------------------------------------#
+# TESTCASES #
+#-----------------------------------------------------------------------------#
+Temp lm73temp -n lm75
+MMC_write_25kB bwrite -q -n /dev/mmcblk1 -b 25000 -i 1
+USB_stick_1_write_25kB bwrite -q -n /dev/sda -b 25000 -i 1
+USB_stick_2_write_25kB bwrite -q -n /dev/sdb -b 25000 -i 1
+#I2C i2c -q -d /dev/i2c-0 -s 0x68 -a 0x0a -b 0x0b -w 100 -i 150
+Network iptest -q -g 192.168.1.100 -n 1 -w 50
+#Play_wave_file aplay /opt/ltp/runtest/ding_48kHz_16bit_m.wav
+CAN can -n 2 -o 500
+Serial0 serial -d /dev/ttymxc0 -q -b 115200 -fn -c 5 -s 1024 -o 300
+Serial1 serial -d /dev/ttymxc1 -q -b 115200 -fn -c 5 -s 1024 -o 300
+RS4854 serial -d /dev/ttymxc2 -q -b 115200 -fn -c 5 -s 1024 -o 300
+Touch touchmon -z -r /touch_tst_socket
+Wait sleep 0.9
+
+#-----------------------------------------------------------------------------#
+# CLEANUP #
+#-----------------------------------------------------------------------------#
+Touchtest_stop touchmon -t -r /touch_tst_socket -q
diff --git a/runtest/santino-lt b/runtest/santino-lt
new file mode 100755
index 0000000..3f93969
--- /dev/null
+++ b/runtest/santino-lt
@@ -0,0 +1,48 @@
+#-----------------------------------------------------------------------------#
+# DESCRIPTION #
+# ----------- #
+# This is a configuration file for the Garz & Fricke Built-In-Test Framework, #
+# which is implemented using tests from the LTP. Thus, the configuration file #
+# looks very similar to LTP configuration files and can actually be used by #
+# LTP. However, it should not, since there are slight differences: #
+# This file is divided into three sections: PREPARATION, TESTCASES and #
+# CLEANUP. Each section contains lines beginning with a name and ending with #
+# a command line. The command lines of the PREPARATION section are executed #
+# once at the start of the execution. Then, the command lines of the TEST- #
+# CASES section is looped for the given number of iterations. At the end, the #
+# commands of the CLEANUP section are run once. #
+#-----------------------------------------------------------------------------#
+
+#-----------------------------------------------------------------------------#
+# PREPARATION #
+#-----------------------------------------------------------------------------#
+Testimage_display FRAMEBUFFER=/dev/fb0 fbv -er /opt/ltp/images/guf_test_800x480.png < /dev/null
+MMC_umount for i in `mount | grep mmcblk1 | awk '{print $1}'`; do umount $i; done
+USB_stick_umount for i in $(grep /dev/sd /proc/mounts | awk '{print $1}' ) ;do umount $i; done
+Touchtest_remove_socket rm -f /touch_tst_socket
+Touchtest_start touchmon -d -i /dev/input/event0 -s /touch_tst_socket -p 0
+RS485pingpong_start rs485pingpong -k -d /dev/ttymxc0 -s 115200 -x 100 &
+
+#-----------------------------------------------------------------------------#
+# TESTCASES #
+#-----------------------------------------------------------------------------#
+Temp lm73temp -n lm75
+#Flash_write_25kB fwrite -q -n /file25k -b 25000 -i 1
+MMC_write_25kB bwrite -q -n /dev/mmcblk1 -b 25000 -i 1
+USB_stick_1_write_25kB bwrite -q -n /dev/sda -b 25000 -i 1
+USB_stick_2_write_25kB bwrite -q -n /dev/sdb -b 25000 -i 1
+#I2C i2c -q -d /dev/i2c-0 -s 0x68 -a 0x0a -b 0x0b -w 100 -i 150
+Network iptest -q -g 192.168.1.100 -n 1 -w 50
+#Play_wave_file aplay /opt/ltp/runtest/ding_48kHz_16bit_m.wav
+CAN can -n 2 -o 500
+#Serial0 serial -d /dev/ttymxc0 -q -b 115200 -fn -c 5 -s 1024 -o 300
+#RS4854 serial -d /dev/ttymxc2 -q -b 115200 -fn -c 5 -s 1024 -o 300
+Serial0&RS485 rs485pingpong -r 5 -s 115200 -x 100 -o 1
+Touch touchmon -z -r /touch_tst_socket
+Wait sleep 0.9
+
+#-----------------------------------------------------------------------------#
+# CLEANUP #
+#-----------------------------------------------------------------------------#
+Touchtest_stop touchmon -t -r /touch_tst_socket -q
+RS485pingpong_stop killall rs485pingpong
diff --git a/runtest/santoka b/runtest/santoka
index e5163b2..55d62c6 100644
--- a/runtest/santoka
+++ b/runtest/santoka
@@ -19,15 +19,15 @@
Testimage_display FRAMEBUFFER=/dev/fb0 fbv -er /opt/ltp/images/guf_test_800x480.png < /dev/null
#Testimage_display /usr/share/qt5/examples/touch/fingerpaint/fingerpaint &
Testimage_HDMI hdmiconfig unblank; hdmiconfig set 1920 1080 60 16; sleep 3; FRAMEBUFFER=/dev/fb2 fbv -er /opt/ltp/images/guf_test_800x480.png < /dev/null
-MMC_umount for i in `mount | grep mmcblk1 | awk '{print $1}'`; do echo $i; done
+MMC_umount for i in `mount | grep mmcblk1 | awk '{print $1}'`; do umount $i; done
USB_stick_1_umount for i in `mount | grep sda | awk '{print $1}'`; do umount $i; done
USB_stick_2_umount for i in `mount | grep sdb | awk '{print $1}'`; do umount $i; done
USB_stick_3_umount for i in `mount | grep sdc | awk '{print $1}'`; do umount $i; done
Touchtest_remove_socket rm -f /touch_tst_socket
Touchtest_start touchmon -d -i /dev/input/event0 -s /touch_tst_socket -p 0
-Network_eth0 ifconfig eth0 add 192.168.1.1
-Network_eth1 ifconfig eth1 add 192.168.2.1
-Network_wlan0 iwconfig wlan0 txpower 18 && ifconfig wlan0 add 192.168.3.1
+#Network_eth0 ifconfig eth0 add 192.168.1.1
+#Network_eth1 ifconfig eth1 add 192.168.2.1
+#Network_wlan0 iwconfig wlan0 txpower 18 && ifconfig wlan0 add 192.168.3.1
#Test_BT_server l2test -I 32768 -r -R
@@ -45,19 +45,19 @@ USB_stick_3_write_25kB bwrite -q -n /dev/sdc -b 25000 -i 1
#I2C i2c -q -d /dev/i2c-0 -s 0x68 -a 0x0a -b 0x0b -w 100 -i 150
Network_eth0 iptest -q -g 192.168.1.100 -n 1 -w 50
Network_eth1 iptest -q -g 192.168.2.100 -n 1 -w 50
-Network_wlan0 iptest -q -g 192.168.3.100 -n 1 -w 1000
-Test_BT_client l2test -O 32768 -s 00:06:C6:4F:95:D4 -R -N 2
-#Test_BT_ping l2ping -c 2 -s 640 -t 2 -v 00:22:43:E2:F4:25 >/tmp/l2ping-log && echo "l2ping 1 TPASS : " `grep loss /tmp/l2ping-log`
+#Network_wlan0 iptest -q -g 192.168.3.100 -n 1 -w 1000
+#Test_BT_client l2test -O 32768 -s 00:06:C6:4F:95:D4 -R -N 2
+#Test_BT_ping l2ping -c 2 -s 640 -t 2 -v 00:22:43:E2:F4:25 >/tmp/l2ping-log && echo "l2ping 1 TPASS : " `grep loss /tmp/l2ping-log`
#Play_wave_file aplay /opt/ltp/runtest/ding_48kHz_16bit_m.wav
CAN can -n 2 -o 500
Serial0 serial -d /dev/ttymxc0 -q -b 115200 -fn -c 5 -s 1024 -o 300
Serial1 serial -d /dev/ttymxc1 -q -b 115200 -fn -c 5 -s 1024 -o 300
RS4854 serial -d /dev/ttymxc2 -q -b 115200 -fn -c 5 -s 1024 -o 300
Touch touchmon -z -r /touch_tst_socket
-Wait sleep 1
+Wait sleep 0.9
#-----------------------------------------------------------------------------#
# CLEANUP #
#-----------------------------------------------------------------------------#
Touchtest_stop touchmon -t -r /touch_tst_socket -q
-Testimage_display_stop killall fingerpaint
+Testimage_display_stop killall fingerpaint
\ No newline at end of file
--
GitLab