--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f6b301dc

YT-227 Fix submit LAVA task for smoke tests

  Smoke tests use a single type of test (boot.jinja2).
  However, some parameters need to be dynamic, such as device type.
  To address this, the `test-plan-args-var` introduced
  what allows environment variables with extra parameters to be used
  in the LAVA job generation script.
  The pipeline has been adjusted accordingly.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@be2a04ab

Enable verbose mode for submit_test.py

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@cf0071f2

YT-234: Fix ci-test pipelines (was broken with YT-65 MR)

 The YT-65 MR refactored the repo_checkout job,
 which is also used in CI-test pipelines.
 Added the necessary changes to the CI-test code.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@667964a6

Fix typos

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@bd7e9366

YT-65 We perform a repository checkout in the manifest project for each build job.
  Each pipeline builds code for multiple MACHINES.
  This results in multiple downloads from each repository in the manifest.
  Occasionally, certain repositories may fail to fetch data.
  To avoid fetching the same data repeatedly for each build job in the pipeline,
  the `repo_checkout` stage is added.
  In this stage, the repo tool prepares the repository structure once
  and stores it in the cache.
  Subsequent build jobs use the pre-fetched data from the cache.

Dmitry Petrov authored 8 months ago and Jonas Höppner committed 7 months ago

There is an issue with a display showing artifacts after leaving the display
blank for some time. If sel6_8 line stays high during the power-off of the
display, the display gets side-powered by the sel6_8 line. And the power
sequence during the next power up does not reset the display in a good state.

So switch the sel6_8 gpio to low, when the VDD-LCD is powered of, and enable it
to the correct state, just before the VDD-LCD is powered on again.

(cherry picked from commit 4f570f563b1ea85d901b8db98af6ad629c4aa1ba)

sel68

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@de29fa3e

    YT-230: Fix Manifest Pipeline after "Improve Release" Changes

    Fix typo introduced in previous commit

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@417b79ef

YT-230: Fix Manifest Pipeline after "Improve Release" Changes

The recent changes introduced new rules in manifest-pipeline-yocto.yml,
which have overwritten the general rules defined in build-pipeline.yml.
Use !reference to combine both sets of rules effectively.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@a7e07f19

YT-180 Generation of the firmware package failed due to a typo
  in the code that checks of existance of the variable.
  What caused  TypeError: unhashable type: 'list'

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@7bd78810

PBB-32 Fix suffix addition in FNGo pipeline for custom projects
 due to an issue in GitLab where escaped variables are not correctly
 passed to child pipelines, a workaround is required.
 As a result, we use raw variables.
 The DEFERRED_RELEASE_VERSION variable was introduced for this purpose.
 However, for custom builds, we have an additional place where we modify
 the DEFERRED_RELEASE_VERSION variable to add a suffix.
 Therefore, extra interim variables need to be added to handle the workaround
 and ensure we get the raw variable in the end.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@83f4f610

Take group path from group instead of options

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@93eabeb3

YT-157 Adjust GitLab Backup Script to avoid shared projects
 Ensure backups are only processed for direct member projects of a group.
 If a project is shared with a group, backing it up without the appropriate
 permissions can cause the backup to fail.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@77a91f92

YT-93 Improve release workflow

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@edbfded2

YT-164 Sort artifacts on confluence release page for FNG system

Mikhail Vanyulin authored 9 months ago and Jonas Höppner committed 8 months ago

It will be loaded as external logo.

Signed-off-by: Mikhail Vanyulin <mikhail.vanyulin@rtsoft.de>

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@6ab45a4c

YT-190 Enable credential.useHttpPath for git credential manages in CI pipeline

The signals of some AC97 codecs is not stable enough over the whole
temperature range. Enable the hysteresis for clock and input data lines.
Also reduce the drive-strength of the sync and output data lines to
reduce over-/undershoot on them.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@516090fa

YT-167 Implement parsing full URL and multiple tokens

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@8abfbca7

YT-176 Skip projects with no permissions
  If a project have no permissions,
  it probably won't be processed in seco-ne CI pipelines.

  Exclude venv directory from version control

The DE pin is routed via the GPIO-Expander on the SOM-SMARC-MX8M-Plus.
This causes a deadlock, because the system expects a non-sleeping IO as
enable pin, but the GPIO-Expander only provides "sleeping" GPIOs (all
GPIO chips that are connected via a slow bus are considered
sleeping GPIOs).

MODV-13

The temperature sensor now uses our standard address. Change the DTs
accordingly.

The default mode is set to host.

- The "vbus-power-source" key isn't supported by the driver. For
connecting the VBUS regulator to the PHY, the "vbus-supply" key has to
be used.
- Clean-up the VBUS enable pinctrl definition

The trizeps8plus.dts has changed and now uses CTS/RTS per default in
the pinctrl. This provokes a collision with the I2C_6 of the DE.
Override the pinctrl and disable RTS/CTS for UART2 again.

Jonas Höppner authored 10 months ago and Jonas Höppner committed 9 months ago

dts:arm64:pbb: Remove standalone devicetree for tr8mp v1r5, replaced by overlay

(cherry picked from commit bbd3bfc8)

dts:arm64:pbb: Add devicetree for tr8mp v1r5 (actually without MCU)

(cherry picked from commit b3d98e85)

pbb:tr8mp V1R5: Remove RESET_OUT from pcie pinctrl

The reset out is already used by the gpio expander on the baseboard
and has no functional meaning for PCIe in this setup.

(cherry picked from commit 97836eb6)

dts:arm64:tr8mp: Add regulator to control WL_POWERDOWN

(cherry picked from commit a46fe615)

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@01d6973b

Scripts: Add script to delete all integration/ branches

It happens that the integration branches are left over from provious
runs of the pipeline, when MRs are closed without merging, for example.

Also a bug in the gitlab-ci makes the pipeline fail, when an integration
branch should be reused. The new scripts just deletes all integration
branch in the given project tree without further checks.

Needs to be run manually.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c05acbe1

Add scripts to setup a virtual python environment

Use:
```
cd script
source setup_venv.sh
```
to change to the venv.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@58554035

scripts:release_info: Deep copy dict in merge_variables

Without the deep copy, the merge operation manipulates the dict it is
storing the new values in.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@bd4caeae

report_image_diff: rework variables extraction

The current solution makes too much assumptions about the pipeline and needs
to reimplement some of the gitlab yaml interpretion.

The new version of the script extracts MACHINE and DISTRO from the jobs themselves:
- MACHINE is part of the build job name ("build-$MACHINE");
- DISTRO is printed by bitbake and can be found in build log.

Typos

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@cbf168eb

build:credentials: Fix error when storing credentials in cache

The credentials helper wasn't storing the credentials in the cache.
Seemingly, the echo added whitespaces at the beginning of the lines
which can't be interpreted by the git credential approve command.
Also the USERNAME was renamed to TOKEN_USER because the variable is
already filled with the system users name.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@d09e3a96

CI: generate_firmware: Add releasename as name to json file

To use the generated json file in the json-fwr tooling, it helps to fill
the name.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@c2cd3b43

pipeline:confluence: Add parent for Flash-N-Go release page

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@887db0df

pipelines: Add wic.img files to supported artefacts

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@54f17a69

Update CI_IMAGES_REVISION

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@4fd7f8a8

report_image_diff: get rid of hardcode

Parse machines, pipeline names and distros from gitlab yaml file instead of
harcoding these values in the script.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@05d6a8db

fullbuildpipeline.py: fix timeout

The problem was found in pipeline:
https://git.seco.com/seco-ne/yocto/manifest/-/jobs/954246

Fix missing update of upstream pipeline status inside while loop.

The timeout in the script was not in sync with the default timeout for build jobs.
Set timeout in __get_build_pipelines() function to 8 hours.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@3077d252

handle_artifacts: add "try" block for keep_/delete_artifacts

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@b0be529b

handle_artifacts: fix case when pipeline was canceled

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@1a4a5ab1

Refactoring: move common code to separate files

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@bf6de920

convert_md2html: new font style for main text

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@dc43f865

convert_md2html: move content to left

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@f0088d25

convert_md2html: fix long commands

Several blocks of code are too long and don't fit on the page.
Words are not wrapped to the next line.
To fix this, adjust the span slacc in css.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@caa6efa2

convert_md2html: restore several css rules

- fix h1 color
- fix missing gorizontal line above h1
- increased h2 font size
- fix missing borders for table
- restore link style

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@28a1bc5e

convert_md2html: Update the style for the generated html file

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@6656c465

CI: allow failure in new jobs 'handle_artifacts' and 'report-image-diff'

It seems that these jobs are not yet completly errorsafe and we could
ignore the failure without changing the build artifacts.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@de9851be

ci: add a job to handle artifacts after merge

In the latest commit in the manifest it often happens, that the pipeline
does not contain the artifacts itself, but just a link to the pipeline of the MR.

Added a python script with corresponding GitLab CI job to launch this script.
The script searches for the latest pipelines for default branch in manifest repo,
and then decides either to keep or delete artifacts for particular build.

The build artifacts are kept for:
- the latest commit
- the last successful build
- the tagged commits (e.g. "fngsystem/47.0", "kirkstone/20.0")

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@1299a9d6

CI: add "report-image-diff" job

Add a python script and a GitLab CI job to run it. The job is triggered
when the build is complete.

The script retrieves build artifacts for the default/main branch
(currently "kirkstone") in the manifest repo and build artifacts
for the integration branch of merge request.

After that, it compares those builds and creates a summary of the overall
changes. In particular:
- size of compressed artifacts (artifacts.zip)
- size of built image
- difference between manifest files

The summary is reported to stdout and as a comment to the merge request.
Each run of the pipeline means removing the old summary comment and
creating a new one when the build is finished.

- Remove duplicate of SAI2
- Revert the changes to the audio codec and simple-audio-card nodes

Note: The Trizeps VIII Plus v1r3 and newer has the WM8962 audio codec
equipped. For the overrides regarding this see the trizeps8plus_v1r3
include/override.

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@dcc8d92b

build:hardware: Add Trizeps VIII Plus, fix MX93 and sort entries

--

Commit: seco-ne/yocto/infrastructure/gitlab-ci@add2bb17

Revert "CI: remove 'setup_ssh' as ssh access is disabled"

The SSH setup is required for some private projects that pull in
external repos via SSH.

This reverts commit 4d5bca8fb8aaebf8794ffa88a6d0aef779c9eedf.

The define is required by some includes to distinguish between the Mini
and Plus variant.