diff --git a/drivers/staging/gpu/drm/Makefile b/drivers/staging/gpu/drm/Makefile
index fac5d6a5d3655a1c5e96d49620a5d6e66b70fc91..4cb467d559d865c373fa78bf93159b652ae11d3b 100644
--- a/drivers/staging/gpu/drm/Makefile
+++ b/drivers/staging/gpu/drm/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_DRM_QL_BX5) += bridge/
+obj-y += bridge/
diff --git a/drivers/staging/gpu/drm/bridge/Kconfig b/drivers/staging/gpu/drm/bridge/Kconfig
index fc960be4d145194cd515c4f3566fa307980a2b31..864325cb6d1ad329a1658d99b70942a9bf97d28b 100644
--- a/drivers/staging/gpu/drm/bridge/Kconfig
+++ b/drivers/staging/gpu/drm/bridge/Kconfig
@@ -10,4 +10,13 @@ config DRM_QL_BX5
Support for the QuickLogic ArcticLink III Bx5
MIPI to LVDS converter.
+config DRM_SECO_TR8FPGA
+ tristate "SECO tr8fpga DSI to RGB bridge driver"
+ depends on OF && I2C && DRM
+ select DRM_MIPI_DSI
+ select DRM_PANEL
+ help
+ Support for a FPGA-based DSI to RGB bridge by SECO
+
+ Say Yes if you dare.
diff --git a/drivers/staging/gpu/drm/bridge/Makefile b/drivers/staging/gpu/drm/bridge/Makefile
index 4a163a19277b9b18e772b229d301fb7b75934dcb..e6f6776c8d26b68da0bb0432a3c7536bc21d3282 100644
--- a/drivers/staging/gpu/drm/bridge/Makefile
+++ b/drivers/staging/gpu/drm/bridge/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_DRM_QL_BX5) += quicklogic-bx5.o
+obj-$(CONFIG_DRM_SECO_TR8FPGA) += seco-tr8fpga-dsi2rgb.o
diff --git a/drivers/staging/gpu/drm/bridge/seco-tr8fpga-dsi2rgb.c b/drivers/staging/gpu/drm/bridge/seco-tr8fpga-dsi2rgb.c
new file mode 100644
index 0000000000000000000000000000000000000000..ab04b457df79f3b28e977cad29a1b11d4d02143b
--- /dev/null
+++ b/drivers/staging/gpu/drm/bridge/seco-tr8fpga-dsi2rgb.c
@@ -0,0 +1,218 @@
+/*
+ * SECO FPGA DSI to RGB bridge driver.
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+
+static int tr8fpga_i2c_read(struct i2c_client *client, char *writebuf,
+ int writelen, char *readbuf, int readlen)
+{
+ int ret;
+
+ if (writelen > 0) {
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = writelen,
+ .buf = writebuf,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = readlen,
+ .buf = readbuf,
+ },
+ };
+
+ ret = i2c_transfer(client->adapter, msgs, 2);
+ if (ret < 0)
+ dev_err(&client->dev, "%s: i2c read error.\n", __func__);
+ } else {
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = readlen,
+ .buf = readbuf,
+ },
+ };
+
+ ret = i2c_transfer(client->adapter, msgs, 1);
+ if (ret < 0)
+ dev_err(&client->dev, "%s:i2c read error.\n", __func__);
+ }
+
+ return ret;
+}
+
+static int tr8fpga_i2c_write(struct i2c_client *client, char *writebuf,
+ int writelen)
+{
+ int ret;
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = writelen,
+ .buf = writebuf,
+ },
+ };
+ ret = i2c_transfer(client->adapter, msgs, 1);
+ if (ret < 0)
+ dev_err(&client->dev, "%s: i2c write error.\n", __func__);
+
+ return ret;
+}
+
+static int tr8fpga_write_reg(struct i2c_client *client, u8 addr, const u8 val)
+{
+ u8 buf[2] = {0};
+
+ buf[0] = addr;
+ buf[1] = val;
+
+ return tr8fpga_i2c_write(client, buf, sizeof(buf));
+}
+
+static int tr8fpga_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct property *prop;
+ int err;
+ int i, size;
+ struct device_node *np = client->dev.of_node;
+ int addresses[100];
+ int values[100];
+ char address, value;
+ struct gpio_desc *enable_gpio;
+
+ enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_HIGH);
+ if (enable_gpio)
+ gpiod_set_value_cansleep(enable_gpio, 1);
+
+ address = (char)0;
+ err = tr8fpga_i2c_read(client, &address, 1, &value, 1);
+ if (err < 0) {
+ dev_err(&client->dev, "failed to read chip id\n");
+ return err;
+ }
+ if (value != 0x61) {
+ dev_err(&client->dev, "chip id is not correct\n");
+ return err;
+ }
+
+ prop = of_find_property(np, "tr8fpga,addresses", NULL);
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+
+ size = prop->length / sizeof(int);
+
+ err = of_property_read_u32_array(np, "tr8fpga,addresses", addresses, size);
+ if (err && (err != -EINVAL)) {
+ dev_err(&client->dev, "Unable to read 'tr8fpga,addresses'\n");
+ return err;
+ }
+
+ prop = of_find_property(np, "tr8fpga,values", NULL);
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+
+ i = prop->length / sizeof(u32);
+ if (i != size) {
+ dev_err(&client->dev, "invalid 'tr8fpga,values' length should be same as addresses\n");
+ return -EINVAL;
+ }
+
+ err = of_property_read_u32_array(np, "tr8fpga,values", values, i);
+ if (err && (err != -EINVAL)) {
+ dev_err(&client->dev, "Unable to read 'tr8fpga,values'\n");
+ return err;
+ }
+
+ for (i = 0; i < size; i++)
+ {
+ printk(KERN_ERR"tr8fpga_probe: tr8fpga_write_reg 0x%x 0x%x\n",addresses[i], values[i]);
+
+ tr8fpga_write_reg(client, addresses[i], values[i]);
+ if (err < 0) {
+ dev_err(&client->dev, "failed to write data to the chip\n");
+ return err;
+ }
+ }
+
+
+ return 0;
+}
+
+static int tr8fpga_remove(struct i2c_client *client)
+{
+ struct gpio_desc *enable_gpio;
+
+ enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_LOW);
+ if (enable_gpio)
+ gpiod_set_value_cansleep(enable_gpio, 0);
+
+ return 0;
+}
+
+static const struct i2c_device_id tr8fpga_id[] = {
+ {"tr8fpga", 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, tr8fpga_id);
+
+static struct of_device_id tr8fpga_match_table[] = {
+ { .compatible = "seco,tr8fpga",},
+ { },
+};
+
+static struct i2c_driver tr8fpga_i2c_driver = {
+ .probe = tr8fpga_probe,
+ .remove = tr8fpga_remove,
+ .driver = {
+ .name = "tr8fpga",
+ .owner = THIS_MODULE,
+ .of_match_table = tr8fpga_match_table,
+ },
+ .id_table = tr8fpga_id,
+};
+
+static int __init tr8fpga_init(void)
+{
+ return i2c_add_driver(&tr8fpga_i2c_driver);
+}
+
+static void __exit tr8fpga_exit(void)
+{
+ i2c_del_driver(&tr8fpga_i2c_driver);
+}
+
+module_init(tr8fpga_init);
+module_exit(tr8fpga_exit);
+
+MODULE_DESCRIPTION("SECO tr8fpga DSI to RGB bridge driver");
+MODULE_LICENSE("GPL v2");
+