diff --git a/arch/arm64/boot/dts/seconorth/Makefile b/arch/arm64/boot/dts/seconorth/Makefile
index ed7bee276f469e16cf49c05bd4ec6d7f9af73e80..a5719e766ef5307f68777016db23ebbcbdc7aa43 100644
--- a/arch/arm64/boot/dts/seconorth/Makefile
+++ b/arch/arm64/boot/dts/seconorth/Makefile
@@ -1,9 +1,13 @@
# SPDX-License-Identifier: GPL-2.0
dtb-y += \
- seco-tanaro-atm0700l61ct.dtb \
- seco-tanaro-fg0700w0dsswagl1.dtb \
- seco-tanaro-qp_070wsvgamlli1d.dtb \
+ seconorth-tanaro-atm0700l61ct.dts \
+ seconorth-tanaro-fg0700w0dsswagl1.dts \
+ seconorth-tanaro-g121xcett122e.dts \
+ seconorth-tanaro-qp_070wsvgamlli1d.dts \
+ seconorth-trizeps8plus-dual-espresso.dts \
+ seconorth-trizeps8plus-hdmi-gpu.dts \
+ seconorth-trizeps8plus-pconxs_v3-atm0700.dts \
always := $(dtb-y)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/seconorth/dual-espresso.dtsi b/arch/arm64/boot/dts/seconorth/dual-espresso.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..673e1dcf65153f5ded9135deb0e29eef15306bd0
--- /dev/null
+++ b/arch/arm64/boot/dts/seconorth/dual-espresso.dtsi
@@ -0,0 +1,576 @@
+/*
+ * Copyright 2022 SECO Northern Europe GmbH
+ *
+ */
+
+/*
+Remarks:
+ - Use ETHERNET_ONLY_100MBIT for dual espresso board
+Defines:
+*/
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ reg_vin_fused: vin_fused {
+ compatible = "regulator-fixed";
+ regulator-name = "VIN_FUSED";
+ regulator-min-microvolt = <12000000>;
+ /* max should be 24V but the fixed regulator driver does
+ not allow a range here */
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ reg_board_5v: 5v {
+ compatible = "regulator-fixed";
+ regulator-name = "+5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <®_vin_fused>;
+ };
+
+ reg_3v3: 3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <®_vin_fused>;
+ };
+
+ reg_display_pwr: display-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "DISPLAY PWCTRL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <®_vin_fused>;
+ };
+
+ reg_usbhost_pwr: usbhost-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "USBHOST PWR";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbhost_enable>;
+ gpio = <spin129_gpio 0>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <®_board_5v>;
+ };
+
+ reg_usbotg_pwr: usbotg-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "USBOTG PWR";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_enable>;
+ gpio = <spin127_gpio 0>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <®_board_5v>;
+ };
+
+};
+
+/ {
+ backlight2: backlight2 {
+ compatible = "pwm-legacy-backlight";
+ pwms = <&pwm4 0 100000 0>;
+ pinctrl-0 = <&pinctrl_backlight2_enable>;
+ enable-gpios = <spin63_gpio GPIO_ACTIVE_HIGH>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <80>;
+ status = "okay";
+ };
+
+ panel_lvds1: panel1 {
+ status = "okay";
+ compatible = "panel-lvds";
+ data-mapping = "vesa-24";
+ width-mm = <154>;
+ height-mm = <86>;
+ backlight = <&backlight>;
+ enable-gpios = <spin100_gpio GPIO_ACTIVE_HIGH>;
+
+ panel-timing {
+ clock-frequency = <51206400>;
+ hactive = <1024>;
+ vactive = <600>;
+ hfront-porch = <159>;
+ hsync-len = <2>;
+ hback-porch = <159>;
+ vfront-porch = <17>;
+ vsync-len = <1>;
+ vback-porch = <17>;
+ };
+
+ port {
+ panel_lvds1_in: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+
+ panel_lvds2: panel2 {
+ status = "okay";
+ compatible = "panel-lvds";
+ data-mapping = "vesa-24";
+ width-mm = <154>;
+ height-mm = <86>;
+ backlight = <&backlight2>;
+ enable-gpios = <spin67_gpio GPIO_ACTIVE_HIGH>;
+
+ panel-timing {
+ clock-frequency = <51206400>;
+ hactive = <1024>;
+ vactive = <600>;
+ hfront-porch = <159>;
+ hsync-len = <2>;
+ hback-porch = <159>;
+ vfront-porch = <17>;
+ vsync-len = <1>;
+ vback-porch = <17>;
+ };
+
+ port {
+ panel_lvds2_in: endpoint {
+ remote-endpoint = <&dsi_bridge_out>;
+ };
+ };
+ };
+
+ buzzer: buzzer {
+ compatible = "pwm-beeper";
+ status = "okay";
+ pwms = <&pwm3 0 416666>;
+ beeper-hz = <2400>;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ status {
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio4 30 0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
+ debug {
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio4 29 0>;
+ color = <LED_COLOR_ID_RED>;
+ panic-indicator = <1>;
+ default-state = "off";
+ };
+
+ error {
+ function = LED_FUNCTION_FAULT;
+ gpios = <&gpio4 28 0>;
+ color = <LED_COLOR_ID_RED>;
+ panic-indicator = <1>;
+ default-state = "off";
+ };
+ };
+};
+
+&backlight {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_backlight_enable>;
+ enable-gpios = <spin73_gpio GPIO_ACTIVE_HIGH>;
+};
+
+&iomuxc {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ SPIN100_GPIO1_IO05 PAD_GPIO /* LCD1_VCC_ON */
+ SPIN67_GPIO4_IO08 PAD_GPIO /* LCD2_VCC_ON */
+ >;
+ };
+
+ pinctrl_i2c2_sn65dsi84_en: sn65dsi84_iogrp {
+ fsl,pins = < SPIN53_GPIO4_IO03 PAD_GPIO >; /* SODIMM Pin 53 MIPI_DSI_EN*/
+ };
+
+ pinctrl_i2c6: i2c6grp {
+ fsl,pins = <
+ SPIN34_I2C6_SCL 0x400001c3
+ SPIN32_I2C6_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_backlight_pwm1: pwm-backlight {
+ fsl,pins = < SPIN77_PWM1_OUT PAD_GPIO >; /* BACKLIGHT_PWM */
+ };
+
+ pinctrl_backlight2_pwm4: pwm-backlight2 {
+ fsl,pins = < SPIN69_PWM4_OUT PAD_GPIO >; /* BACKLIGHT2_PWM */
+ };
+
+ pinctrl_backlight_enable: backlight-enable {
+ fsl,pins = < SPIN73_GPIO PAD_GPIO >; /* BACKLIGHT_ENABLE SODIMM Pin 73 */
+ };
+
+ pinctrl_backlight2_enable: backlight-enable2 {
+ fsl,pins = < SPIN63_GPIO PAD_GPIO >; /* BACKLIGHT_ENABLE SODIMM Pin 63 */
+ };
+
+ pinctrl_ctouch1: ctouch1 {
+ fsl,pins = < SPIN136_GPIO3_IO15 PAD_GPIO /* TOUCH_RES_R */
+ SPIN45_GPIO3_IO04 PAD_GPIO >; /* TOUCH_INT_R */
+ };
+
+ pinctrl_ctouch2: ctouch2 {
+ fsl,pins = < SPIN65_GPIO4_IO07 PAD_GPIO /* TOUCH_RES_L */
+ SPIN102_GPIO1_IO08 PAD_GPIO >; /* TOUCH_INT_L */
+ };
+
+ pinctrl_usbhost_enable: usbhost-enable {
+ fsl,pins = < SPIN129_GPIO PAD_GPIO >; /* USBH_PWR */
+ };
+
+ pinctrl_usbotg_enable: usbotg-enable {
+ fsl,pins = < SPIN127_GPIO PAD_GPIO >; /* USBOTG_PWR */
+ };
+
+ pinctrl_buzzer_pwm3: pwm-buzzer {
+ fsl,pins = <SPIN161_PWM3_OUT PAD_GPIO>;
+ };
+
+ pinctrl_ios: iosgrp {
+ fsl,pins = <
+ SPIN125_GPIO1_IO06 0x106 /* RTC_INT */
+ SPIN43_GPIO1_IO07 0x146 /* LED_BUTTON */
+ SPIN55_GPIO3_IO21 0x146 /* DIG_IN1 */
+ SPIN57_GPIO4_IO04 0x146 /* DIG_IN2 */
+ SPIN79_GPIO5_IO00 0x146 /* PW_FAIL */
+ SPIN146_GPIO5_IO01 0x106 /* STBY_EN */
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ SPIN184_GPIO4_IO30 0x106 /* LED_OP_STATES */
+ SPIN186_GPIO4_IO29 0x106 /* LED_DEBUG */
+ SPIN188_GPIO4_IO28 0x106 /* LED_ERROR */
+ >;
+ };
+};
+
+&i2c1 {
+ egalaxi2c_1: eeti1@2a { /* Touch Pad 1 (R) */
+ reg = <0x2a>;
+ compatible = "eeti,exc3000_ts"; // out of tree driver
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctouch1>;
+ interrupt-parent = <spin45_gpio_parent>;
+ interrupts = <spin45_gpio_pin IRQ_TYPE_LEVEL_HIGH>;
+ irq-gpio = <spin45_gpio GPIO_ACTIVE_LOW>;
+ reset-gpio = <spin136_gpio GPIO_ACTIVE_LOW>;
+ reset-low-active = <1>;
+ irq-low-active = <1>;
+ status = "okay";
+ };
+};
+
+&i2c2 {
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ status = "disabled";
+ };
+
+ rtc:rtc@52 {
+ compatible = "microcrystal,rv3028";
+ reg = <0x52>;
+ trickle-diode-disable;
+ status = "okay";
+ };
+
+ sn65dsi84@2c {
+ status = "okay";
+ compatible = "ti,sn65dsi83";
+ reg = <0x2c>;
+ enable-gpios =<spin53_gpio GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_sn65dsi84_en>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_bridge_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dsi_bridge_out: endpoint {
+ remote-endpoint = <&panel_lvds2_in>;
+ };
+ };
+ };
+ };
+
+ tlc59208@20 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,tlc59108";
+ reg = <0x20>;
+ status = "okay";
+
+ /*
+ * The LED sub-system supports multi-color LEDs,
+ * however the tlc591xx driver doesn't seem to
+ * work properly with the below configuration.
+ * Maybe, we can conduct further test with the
+ * multi-color configuration?
+ */
+
+ /*
+ multi_led {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ blue@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ green@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ red@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ */
+
+ right_light_bar_blue@0 {
+ label = "right_light_bar:blue:status";
+ reg = <0x0>;
+ };
+
+ right_light_bar_green@1 {
+ label = "right_light_bar:green:status";
+ reg = <0x1>;
+ };
+
+ right_light_bar_red@2 {
+ label = "right_light_bar:red:status";
+ reg = <0x2>;
+ };
+
+ left_light_bar_blue@3 {
+ label = "left_light_bar:blue:status";
+ reg = <0x3>;
+ };
+
+ left_light_bar_green@4 {
+ label = "left_light_bar:green:status";
+ reg = <0x4>;
+ };
+
+ left_light_bar_red@5 {
+ label = "left_light_bar:red:status";
+ reg = <0x5>;
+ };
+
+ /* DNP */
+ touch_bg@6 {
+ label = "touch_bg:white:power";
+ reg = <0x6>;
+ };
+
+ /*
+ * The power enable pin of the simple touch
+ * button is connected to the LED driver.
+ * To function, the power enable needs to
+ * be activated before reading of the
+ * interrupt pin.
+ */
+ touch_enable@7 {
+ label = "touch_enable::power";
+ reg = <0x7>;
+ };
+ };
+};
+
+&i2c6 { /* I2C on SODIMM 32,34 */
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c6>;
+ status = "okay";
+
+ egalaxi2c_2: eeti2@2a { /* Touch Pad 2 (L) */
+ reg = <0x2a>;
+ compatible = "eeti,exc3000_ts"; // out of tree driver
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctouch2>;
+ interrupt-parent = <spin102_gpio_parent>;
+ interrupts = <spin102_gpio_pin IRQ_TYPE_LEVEL_HIGH>;
+ irq-gpio = <spin102_gpio GPIO_ACTIVE_LOW>;
+ reset-gpio = <spin65_gpio GPIO_ACTIVE_LOW>;
+ reset-low-active = <1>;
+ irq-low-active = <1>;
+ status = "okay";
+ };
+};
+
+&lcdif1 {
+ status = "okay";
+};
+
+&lcdif2 {
+ status = "okay";
+};
+
+&ldb {
+ status = "okay";
+ lvds-channel@0 {
+ status = "okay";
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_lvds1_in>;
+ };
+ };
+ };
+};
+
+&ldb_phy {
+ status = "okay";
+};
+
+&mipi_dsi {
+ status = "okay";
+
+ port@1 {
+ mipi_dsi_out: endpoint {
+ remote-endpoint = <&dsi_bridge_in>;
+ attach-bridge;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_pwm1>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight2_pwm4>;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ vbus-supply = <®_usbotg_pwr>;
+ disable-over-current;
+};
+
+&usb3_phy1 {
+ vbus-supply = <®_usbhost_pwr>;
+ disable-over-current;
+};
+
+&usdhc2 {
+ cd-gpios = <spin59_gpio GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_buzzer_pwm3>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ios>;
+
+ gpio-line-names = "", "", "", "", "", "", "rtc_int", "led_button",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "dig_in1", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "", "dig_in2", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "led_error", "led_debug", "led_op_state", "";
+};
+
+&gpio5 {
+ gpio-line-names = "power_fail", "standby_enable", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&sdma2 {
+ status = "okay";
+};
+
+&sound_wm8983 {
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR";
+};
+