commit 690bb6fb64f5dc7437317153902573ecad67593d upstream.

There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_is_on_batman_iface. And since some of the
.ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.

Fixes: b7eddd0b ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3b836da4081fa585cf6c392f62557496f2cb0efe upstream.

In case someone combines bpf socket assign and nf_queue, then we will
queue an skb who references a struct sock that did not have its
reference count incremented.

As we leave rcu protection, there is no guarantee that skb->sk is still
valid.

For refcount-less skb->sk case, try to increment the reference count
and then override the destructor.

In case of failure we have two choices: orphan the skb and 'delete'
preselect or let nf_queue() drop the packet.

Do the latter, it should not happen during normal operation.

Fixes: cf7fbe66 ("bpf: Add socket assign support")
Acked-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c3873070247d9e3c7a6b0cf9bf9b45e8018427b1 upstream.

Eric Dumazet says:
  The sock_hold() side seems suspect, because there is no guarantee
  that sk_refcnt is not already 0.

On failure, we cannot queue the packet and need to indicate an
error.  The packet will be dropped by the caller.

v2: split skb prefetch hunk into separate change

Fixes: 271b72c7 ("udp: RCU handling for Unicast packets.")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 747670fd9a2d1b7774030dba65ca022ba442ce71 upstream.

There is no guarantee that state->sk refers to a full socket.

If refcount transitions to 0, sock_put calls sk_free which then ends up
with garbage fields.

I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable
debug work and pointing out state->sk oddities.

Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener")
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 224102de2ff105a2c05695e66a08f4b5b6b2d19c upstream.

The truesize for a UDP GRO packet is added by main skb and skbs in main
skb's frag_list:
skb_gro_receive_list
        p->truesize += skb->truesize;

The commit 53475c5d ("net: fix use-after-free when UDP GRO with
shared fraglist") introduced a truesize increase for frag_list skbs.
When uncloning skb, it will call pskb_expand_head and trusesize for
frag_list skbs may increase. This can occur when allocators uses
__netdev_alloc_skb and not jump into __alloc_skb. This flow does not
use ksize(len) to calculate truesize while pskb_expand_head uses.
skb_segment_list
err = skb_unclone(nskb, GFP_ATOMIC);
pskb_expand_head
        if (!skb->sk || skb->destructor == sock_edemux)
                skb->truesize += size - osize;

If we uses increased truesize adding as delta_truesize, it will be
larger than before and even larger than previous total truesize value
if skbs in frag_list are abundant. The main skb truesize will become
smaller and even a minus value or a huge value for an unsigned int
parameter. Then the following memory check will drop this abnormal skb.

To avoid this error we should use the original truesize to segment the
main skb.

Fixes: 53475c5d ("net: fix use-after-free when UDP GRO with shared fraglist")
Signed-off-by: lena wang <lena.wang@mediatek.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1646133431-8948-1-git-send-email-lena.wang@mediatek.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ffd24fa2 upstream.

Update MAC type check e1000_pch_tgp because for e1000_pch_cnp,
NVM checksum update is still possible.
Emit a more detailed warning message.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663


Fixes: 4051f683 ("e1000e: Do not take care about recovery NVM checksum")
Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7c76ecd9c99b6e9a771d813ab1aa7fa428b3ade1 upstream.

struct xfrm_user_offload has flags variable that received user input,
but kernel didn't check if valid bits were provided. It caused a situation
where not sanitized input was forwarded directly to the drivers.

For example, XFRM_OFFLOAD_IPV6 define that was exposed, was used by
strongswan, but not implemented in the kernel at all.

As a solution, check and sanitize input flags to forward
XFRM_OFFLOAD_INBOUND to the drivers.

Fixes: d77e38e6 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6d0d95a1c2b07270870e7be16575c513c29af3f1 upstream.

if_id will be always 0, because it was not yet initialized.

Fixes: 8dce43919566 ("xfrm: interface with if_id 0 should return error")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 60ce37b03917e593d8e5d8bcc7ec820773daf81d upstream.

Currently, sk_psock_verdict_recv() returns skb->len

This is problematic because tcp_read_sock() might have
passed orig_len < skb->len, due to the presence of TCP urgent data.

This causes an infinite loop from tcp_read_sock()

Followup patch will make tcp_read_sock() more robust vs bad actors.

Fixes: ef565928 ("bpf, sockmap: Allow skipping sk_skb parser program")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-1-eric.dumazet@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 56763f12b0f02706576a088e85ef856deacc98a0 upstream.

We must not dereference @new_hooks after nf_hook_mutex has been released,
because other threads might have freed our allocated hooks already.

BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline]
BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430

CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
 hooks_validate net/netfilter/core.c:171 [inline]
 __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
 find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
 do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024
 rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084
 __sys_setsockopt+0x2db/0x610 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f65a1ace7d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9
RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130
R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000
 </TASK>

The buggy address belongs to the page:
page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993
 prep_new_page mm/page_alloc.c:2434 [inline]
 get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165
 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389
 __alloc_pages_node include/linux/gfp.h:572 [inline]
 alloc_pages_node include/linux/gfp.h:595 [inline]
 kmalloc_large_node+0x62/0x130 mm/slub.c:4438
 __kmalloc_node+0x35a/0x4a0 mm/slub.c:4454
 kmalloc_node include/linux/slab.h:604 [inline]
 kvmalloc_node+0x97/0x100 mm/util.c:580
 kvmalloc include/linux/slab.h:731 [inline]
 kvzalloc include/linux/slab.h:739 [inline]
 allocate_hook_entries_size net/netfilter/core.c:61 [inline]
 nf_hook_entries_grow+0x140/0x780 net/netfilter/core.c:128
 __nf_register_net_hook+0x144/0x820 net/netfilter/core.c:429
 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
 find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
 do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1352 [inline]
 free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404
 free_unref_page_prepare mm/page_alloc.c:3325 [inline]
 free_unref_page+0x19/0x690 mm/page_alloc.c:3404
 kvfree+0x42/0x50 mm/util.c:613
 rcu_do_batch kernel/rcu/tree.c:2527 [inline]
 rcu_core+0x7b1/0x1820 kernel/rcu/tree.c:2778
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558

Memory state around the buggy address:
 ffff88801c1a7f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff88801c1a7f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88801c1a8000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                   ^
 ffff88801c1a8080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff88801c1a8100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 2420b79f ("netfilter: debug: check for sorted array")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6596a0229541270fb8d38d989f91b78838e5e9da upstream.

Commit 749439bf ("ipv6: fix udpv6
sendmsg crash caused by too small MTU") breaks PMTU for xfrm.

A Packet Too Big ICMPv6 message received in response to an ESP
packet will prevent all further communication through the tunnel
if the reported MTU minus the ESP overhead is smaller than 1280.

E.g. in a case of a tunnel-mode ESP with sha256/aes the overhead
is 92 bytes. Receiving a PTB with MTU of 1371 or less will result
in all further packets in the tunnel dropped. A ping through the
tunnel fails with "ping: sendmsg: Invalid argument".

Apparently the MTU on the xfrm route is smaller than 1280 and
fails the check inside ip6_setup_cork() added by 749439bf.

We found this by debugging USGv6/ipv6ready failures. Failing
tests are: "Phase-2 Interoperability Test Scenario IPsec" /
5.3.11 and 5.4.11 (Tunnel Mode: Fragmentation).

Commit b515d263 ("xfrm:
xfrm_state_mtu should return at least 1280 for ipv6") attempted
to fix this but caused another regression in TCP MSS calculations
and had to be reverted.

The patch below fixes the situation by dropping the MTU
check and instead checking for the underflows described in the
749439bf commit message.

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Fixes: 749439bf ("ipv6: fix udpv6 sendmsg crash caused by too small MTU")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0708a0afe291bdfe1386d74d5ec1f0c27e8b9168 upstream.

syzkaller was recently triggering an oversized kvmalloc() warning via
xdp_umem_create().

The triggered warning was added back in 7661809d ("mm: don't allow
oversized kvmalloc() calls"). The rationale for the warning for huge
kvmalloc sizes was as a reaction to a security bug where the size was
more than UINT_MAX but not everything was prepared to handle unsigned
long sizes.

Anyway, the AF_XDP related call trace from this syzkaller report was:

  kvmalloc include/linux/mm.h:806 [inline]
  kvmalloc_array include/linux/mm.h:824 [inline]
  kvcalloc include/linux/mm.h:829 [inline]
  xdp_umem_pin_pages net/xdp/xdp_umem.c:102 [inline]
  xdp_umem_reg net/xdp/xdp_umem.c:219 [inline]
  xdp_umem_create+0x6a5/0xf00 net/xdp/xdp_umem.c:252
  xsk_setsockopt+0x604/0x790 net/xdp/xsk.c:1068
  __sys_setsockopt+0x1fd/0x4e0 net/socket.c:2176
  __do_sys_setsockopt net/socket.c:2187 [inline]
  __se_sys_setsockopt net/socket.c:2184 [inline]
  __x64_sys_setsockopt+0xb5/0x150 net/socket.c:2184
  do_syscall_x64 arch/x86/entry/common.c:50 [inline]
  do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Björn mentioned that requests for >2GB allocation can still be valid:

  The structure that is being allocated is the page-pinning accounting.
  AF_XDP has an internal limit of U32_MAX pages, which is *a lot*, but
  still fewer than what memcg allows (PAGE_COUNTER_MAX is a LONG_MAX/
  PAGE_SIZE on 64 bit systems). [...]

  I could just change from U32_MAX to INT_MAX, but as I stated earlier
  that has a hacky feeling to it. [...] From my perspective, the code
  isn't broken, with the memcg limits in consideration. [...]

Linus says:

  [...] Pretty much every time this has come up, the kernel warning has
  shown that yes, the code was broken and there really wasn't a reason
  for doing allocations that big.

  Of course, some people would be perfectly fine with the allocation
  failing, they just don't want the warning. I didn't want __GFP_NOWARN
  to shut it up originally because I wanted people to see all those
  cases, but these days I think we can just say "yeah, people can shut
  it up explicitly by saying 'go ahead and fail this allocation, don't
  warn about it'".

  So enough time has passed that by now I'd certainly be ok with [it].

Thus allow call-sites to silence such userspace triggered splats if the
allocation requests have __GFP_NOWARN. For xdp_umem_pin_pages()'s call
to kvcalloc() this is already the case, so nothing else needed there.

Fixes: 7661809d ("mm: don't allow oversized kvmalloc() calls")
Reported-by:  <syzbot+11421fbbff99b989670e@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by:  <syzbot+11421fbbff99b989670e@syzkaller.appspotmail.com>
Cc: Björn Töpel <bjorn@kernel.org>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/bpf/CAJ+HfNhyfsT5cS_U9EC213ducHs9k9zNxX9+abqC0kTrPbQ0gg@mail.gmail.com
Link: https://lore.kernel.org/bpf/20211201202905.b9892171e3f5b9a60f9da251@linux-foundation.org


Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Ackd-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d5081bf5dcfb1cb83fb538708b0ac07a10a79cc4 upstream.

The field offset for port configuration status on SPR has been changed to
bit 14 from ICX where it resides at bit 12. By chance link status detection
continued to work on SPR. This is due to bit 12 being a configuration bit
which is in sync with the status bit. Fix this by checking for a SPR device
and checking correct status bit.

Fixes: 26bfe3d0 ("ntb: intel: Add Icelake (gen4) support for Intel NTB")
Tested-by: Jerry Dai <jerry.dai@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5838a148 upstream.

Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if
the thermal zone does not define one.

Fixes: 1ce50e7d ("thermal: core: genetlink support for events/cmd/sampling")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dcf4ff7a48e7598e6b10126cc02177abb8ae4f3f upstream.

xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to
delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5
("net-sysfs: update the queue counts in the unregistration path"),
unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two
facts together means, that xennet_destroy_queues() called from
xennet_remove() cannot do its job, because it's called after
unregister_netdev(). This results in kfree-ing queues that are still
linked in napi, which ultimately crashes:

    BUG: kernel NULL pointer dereference, address: 0000000000000000
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 0 P4D 0
    Oops: 0000 [#1] PREEMPT SMP PTI
    CPU: 1 PID: 52 Comm: xenwatch Tainted: G        W         5.16.10-1.32.fc32.qubes.x86_64+ #226
    RIP: 0010:free_netdev+0xa3/0x1a0
    Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00
    RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286
    RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000
    RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff
    RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050
    R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680
    FS:  0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0
    Call Trace:
     <TASK>
     xennet_remove+0x13d/0x300 [xen_netfront]
     xenbus_dev_remove+0x6d/0xf0
     __device_release_driver+0x17a/0x240
     device_release_driver+0x24/0x30
     bus_remove_device+0xd8/0x140
     device_del+0x18b/0x410
     ? _raw_spin_unlock+0x16/0x30
     ? klist_iter_exit+0x14/0x20
     ? xenbus_dev_request_and_reply+0x80/0x80
     device_unregister+0x13/0x60
     xenbus_dev_changed+0x18e/0x1f0
     xenwatch_thread+0xc0/0x1a0
     ? do_wait_intr_irq+0xa0/0xa0
     kthread+0x16b/0x190
     ? set_kthread_struct+0x40/0x40
     ret_from_fork+0x22/0x30
     </TASK>

Fix this by calling xennet_destroy_queues() from xennet_uninit(),
when real_num_tx_queues is still available. This ensures that queues are
destroyed when real_num_tx_queues is set to 0, regardless of how
unregister_netdev() was called.

Originally reported at
https://github.com/QubesOS/qubes-issues/issues/7257



Fixes: d7dac083414eb5bb9 ("net-sysfs: update the queue counts in the unregistration path")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 08783aa7693f55619859f4f63f384abf17cb58c5 upstream.

This JSP2 PCH actually seems to be some special Apple
specific ICP variant rather than a JSP. Make it so. Or at
least all the references to it seem to be some Apple ICL
machines. Didn't manage to find these PCI IDs in any
public chipset docs unfortunately.

The only thing we're losing here with this JSP->ICP change
is Wa_14011294188, but based on the HSD that isn't actually
needed on any ICP based design (including JSP), only TGP
based stuff (including MCC) really need it. The documented
w/a just never made that distinction because Windows didn't
want to differentiate between JSP and MCC (not sure how
they handle hpd/ddc/etc. then though...).

Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4226


Fixes: 943682e3 ("drm/i915: Introduce Jasper Lake PCH")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224132142.12927-1-ville.syrjala@linux.intel.com


Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Tested-by: Tomas Bzatek <bugs@bzatek.net>
(cherry picked from commit 53581504a8e216d435f114a4f2596ad0dfd902fc)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5ce97f4ec5e0f8726a5dda1710727b1ee9badcac upstream.

The AMD IOMMU logs I/O page faults and such to a ring buffer in
system memory, and this ring buffer can overflow.  The AMD IOMMU
spec has the following to say about the interrupt status bit that
signals this overflow condition:

	EventOverflow: Event log overflow. RW1C. Reset 0b. 1 = IOMMU
	event log overflow has occurred. This bit is set when a new
	event is to be written to the event log and there is no usable
	entry in the event log, causing the new event information to
	be discarded. An interrupt is generated when EventOverflow = 1b
	and MMIO Offset 0018h[EventIntEn] = 1b. No new event log
	entries are written while this bit is set. Software Note: To
	resume logging, clear EventOverflow (W1C), and write a 1 to
	MMIO Offset 0018h[EventLogEn].

The AMD IOMMU driver doesn't currently implement this recovery
sequence, meaning that if a ring buffer overflow occurs, logging
of EVT/PPR/GA events will cease entirely.

This patch implements the spec-mandated reset sequence, with the
minor tweak that the hardware seems to want to have a 0 written to
MMIO Offset 0018h[EventLogEn] first, before writing an 1 into this
field, or the IOMMU won't actually resume logging events.

Signed-off-by: Lennert Buytenhek <buytenh@arista.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YVrSXEdW2rzEfOvk@wantstofly.org


Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9bdd10d57a8807dba0003af0325191f3cec0f11c upstream.

While the $val/$val2 values passed in from userspace are always >= 0
integers, the limits of the control can be signed integers and the $min
can be non-zero and less than zero. To correctly validate $val/$val2
against platform_max, add the $min offset to val first.

Fixes: 817f7c9335ec0 ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220215130645.164025-1-marex@denx.de


Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c648c4bb7d02ceb53ee40172fdc4433b37cee9c6 upstream.

__virt_to_phys function is called very early in the boot process (ie
kasan_early_init) so it should not be instrumented by KASAN otherwise it
bugs.

Fix this by declaring phys_addr.c as non-kasan instrumentable.

Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: 8ad8b727 (riscv: Add KASAN support)
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a3d328037846d013bb4c7f3777241e190e4c75e1 upstream.

In order to get the pfn of a struct page* when sparsemem is enabled
without vmemmap, the mem_section structures need to be initialized which
happens in sparse_init.

But kasan_early_init calls pfn_to_page way before sparse_init is called,
which then tries to dereference a null mem_section pointer.

Fix this by removing the usage of this function in kasan_early_init.

Fixes: 8ad8b727 ("riscv: Add KASAN support")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dcf0c838854c86e1f41fb1934aea906845d69782 upstream.

The get_boot_hartid_from_fdt() function currently returns U32_MAX
for failure case which is not correct because U32_MAX is a valid
hartid value. This patch fixes the issue by returning error code.

Cc: <stable@vger.kernel.org>
Fixes: d7071743 ("RISC-V: Add EFI stub support.")
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0aa6b294b312d9710804679abd2c0c8ca52cc2bc upstream.

PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer.  The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.

Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220302074241.30469-1-nizhen@uniontech.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f37c3bbc ]

Since referencing user space pointers is special, if the user wants to
filter on a field that is a pointer to user space, then they need to
specify it.

Add a ".ustring" attribute to the field name for filters to state that the
field is pointing to user space such that the kernel can take the
appropriate action to read that pointer.

Link: https://lore.kernel.org/all/yt9d8rvmt2jq.fsf@linux.ibm.com/



Fixes: 77360f9b ("tracing: Add test for user space strings when filtering on string pointers")
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c1a66c3bc425ff93774fb2f6eefa67b83170dd7e ]

Workstation application ANSA/META v21.1.4 get this error dmesg when
running CI test suite provided by ANSA/META:
[drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-16)

This is caused by:
1. create a 256MB buffer in invisible VRAM
2. CPU map the buffer and access it causes vm_fault and try to move
   it to visible VRAM
3. force visible VRAM space and traverse all VRAM bos to check if
   evicting this bo is valuable
4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable()
   will set amdgpu_vm->evicting, but latter due to not in visible
   VRAM, won't really evict it so not add it to amdgpu_vm->evicted
5. before next CS to clear the amdgpu_vm->evicting, user VM ops
   ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted)
   but fail in amdgpu_vm_bo_update_mapping() (check
   amdgpu_vm->evicting) and get this error log

This error won't affect functionality as next CS will finish the
waiting VM ops. But we'd better clear the error log by checking
the amdgpu_vm->evicting flag in amdgpu_vm_ready() to stop calling
amdgpu_vm_bo_update_mapping() later.

Another reason is amdgpu_vm->evicted list holds all BOs (both
user buffer and page table), but only page table BOs' eviction
prevent VM ops. amdgpu_vm->evicting flag is set only for page
table BOs, so we should use evicting flag instead of evicted list
in amdgpu_vm_ready().

The side effect of this change is: previously blocked VM op (user
buffer in "evicted" list but no page table in it) gets done
immediately.

v2: update commit comments.

Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Qiang Yu <qiang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5f6b0f2d037c8864f20ff15311c695f65eb09db5 ]

The f_CNT register (at the PCI config. address 0x78) is 16-bit, not
8-bit! The bug was there from the very start... :-(

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Fixes: 669a5db4 ("[libata] Add a bunch of PATA drivers.")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d3d079bd ]

When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.

This code checks if the previous value in TDR register is sent before
writing the x_char value into register.

Fixes: 48a6092f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 77360f9b ]

Pingfan reported that the following causes a fault:

  echo "filename ~ \"cpu\"" > events/syscalls/sys_enter_openat/filter
  echo 1 > events/syscalls/sys_enter_at/enable

The reason is that trace event filter treats the user space pointer
defined by "filename" as a normal pointer to compare against the "cpu"
string. The following bug happened:

 kvm-03-guest16 login: [72198.026181] BUG: unable to handle page fault for address: 00007fffaae8ef60
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0001) - permissions violation
 PGD 80000001008b7067 P4D 80000001008b7067 PUD 2393f1067 PMD 2393ec067 PTE 8000000108f47867
 Oops: 0001 [#1] PREEMPT SMP PTI
 CPU: 1 PID: 1 Comm: systemd Kdump: loaded Not tainted 5.14.0-32.el9.x86_64 #1
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:strlen+0x0/0x20
 Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11
       48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8
       48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31
 RSP: 0018:ffffb5b900013e48 EFLAGS: 00010246
 RAX: 0000000000000018 RBX: ffff8fc1c49ede00 RCX: 0000000000000000
 RDX: 0000000000000020 RSI: ffff8fc1c02d601c RDI: 00007fffaae8ef60
 RBP: 00007fffaae8ef60 R08: 0005034f4ddb8ea4 R09: 0000000000000000
 R10: ffff8fc1c02d601c R11: 0000000000000000 R12: ffff8fc1c8a6e380
 R13: 0000000000000000 R14: ffff8fc1c02d6010 R15: ffff8fc1c00453c0
 FS:  00007fa86123db40(0000) GS:ffff8fc2ffd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fffaae8ef60 CR3: 0000000102880001 CR4: 00000000007706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  filter_pred_pchar+0x18/0x40
  filter_match_preds+0x31/0x70
  ftrace_syscall_enter+0x27a/0x2c0
  syscall_trace_enter.constprop.0+0x1aa/0x1d0
  do_syscall_64+0x16/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7fa861d88664

The above happened because the kernel tried to access user space directly
and triggered a "supervisor read access in kernel mode" fault. Worse yet,
the memory could not even be loaded yet, and a SEGFAULT could happen as
well. This could be true for kernel space accessing as well.

To be even more robust, test both kernel and user space strings. If the
string fails to read, then simply have the filter fail.

Note, TASK_SIZE is used to determine if the pointer is user or kernel space
and the appropriate strncpy_from_kernel/user_nofault() function is used to
copy the memory. For some architectures, the compare to TASK_SIZE may always
pick user space or kernel space. If it gets it wrong, the only thing is that
the filter will fail to match. In the future, this needs to be fixed to have
the event denote which should be used. But failing a filter is much better
than panicing the machine, and that can be solved later.

Link: https://lore.kernel.org/all/20220107044951.22080-1-kernelfans@gmail.com/
Link: https://lkml.kernel.org/r/20220110115532.536088fd@gandalf.local.home



Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Reported-by: Pingfan Liu <kernelfans@gmail.com>
Tested-by: Pingfan Liu <kernelfans@gmail.com>
Fixes: 87a342f5 ("tracing/filters: Support filtering for char * strings")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 92fba084 ]

In exfat_truncate(), the computation of inode->i_blocks is wrong if
the file is larger than 4 GiB because a 32-bit variable is used as a
mask. This is fixed and simplified by using round_up().

Also fix the same buggy computation in exfat_read_root() and another
(correct) one in exfat_fill_inode(). The latter was fixed another way
last month but can be simplified by using round_up() as well. See:

  commit 0c336d6e ("exfat: fix incorrect loading of i_blocks for
                        large files")

Fixes: 98d91704 ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7+
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Christophe Vu-Brugier <christophe.vu-brugier@seagate.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7dee6f57 ]

Also add a local "struct exfat_inode_info *ei" variable to
exfat_truncate() to simplify the code.

Signed-off-by: Christophe Vu-Brugier <christophe.vu-brugier@seagate.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 501e38a5531efbd77d5c73c0ba838a889bfc1d74 upstream.

dev->config and dev->hs_config and dev->dev need to be cleaned if
dev_config fails to avoid UAF.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20211231172138.7993-3-hbh25y@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 89f3594d0de58e8a57d92d497dea9fee3d4b9cda upstream.

dev->buf does not need to be released if it already exists before
executing dev_config.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20211231172138.7993-2-hbh25y@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 21e8a96377e6b6debae42164605bf9dcbe5720c5 ]

Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990
0x1071 composition in order to avoid bind error.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5de717974005fcad2502281e9f82e139ca91f4bb ]

Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.

Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0b0dcb3882c8f08bdeafa03adb4487e104d26050 ]

Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.

Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]

pm_runtime_get_() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Link: https://lore.kernel.org/r/1642311296-87020-1-git-send-email-lyz_cs@pku.edu.cn


Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 21bffcb76ee2fbafc7d5946cef10abc9df5cfff7 ]

seccomp_bpf failed on tests 47 global.user_notification_filter_empty
and 48 global.user_notification_filter_empty_threaded when it's
tested on updated kernel but with old kernel headers. Because old
kernel headers don't have definition of macro __NR_clone3 which is
required for these two tests. Since under selftests/, we can install
headers once for all tests (the default INSTALL_HDR_PATH is
usr/include), fix it by adding usr/include to the list of directories
to be searched. Use "-isystem" to indicate it's a system directory as
the real kernel headers directories are.

Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Tested-by: Sherry Yang <sherry.yang@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3d6cc989 ]

When cifs_get_root() fails during cifs_smb3_do_mount() we call
deactivate_locked_super() which eventually will call delayed_free() which
will free the context.
In this situation we should not proceed to enter the out: section in
cifs_smb3_do_mount() and free the same resources a second time.

[Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0

[Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G           OE     5.17.0-rc3+ #4
[Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019
[Thu Feb 10 12:59:06 2022] Call Trace:
[Thu Feb 10 12:59:06 2022]  <IRQ>
[Thu Feb 10 12:59:06 2022]  dump_stack_lvl+0x5d/0x78
[Thu Feb 10 12:59:06 2022]  print_address_description.constprop.0+0x24/0x150
[Thu Feb 10 12:59:06 2022]  ? rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022]  kasan_report.cold+0x7d/0x117
[Thu Feb 10 12:59:06 2022]  ? rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022]  __asan_load8+0x86/0xa0
[Thu Feb 10 12:59:06 2022]  rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022]  rcu_core+0x547/0xca0
[Thu Feb 10 12:59:06 2022]  ? call_rcu+0x3c0/0x3c0
[Thu Feb 10 12:59:06 2022]  ? __this_cpu_preempt_check+0x13/0x20
[Thu Feb 10 12:59:06 2022]  ? lock_is_held_type+0xea/0x140
[Thu Feb 10 12:59:06 2022]  rcu_core_si+0xe/0x10
[Thu Feb 10 12:59:06 2022]  __do_softirq+0x1d4/0x67b
[Thu Feb 10 12:59:06 2022]  __irq_exit_rcu+0x100/0x150
[Thu Feb 10 12:59:06 2022]  irq_exit_rcu+0xe/0x30
[Thu Feb 10 12:59:06 2022]  sysvec_hyperv_stimer0+0x9d/0xc0
...
[Thu Feb 10 12:59:07 2022] Freed by task 58179:
[Thu Feb 10 12:59:07 2022]  kasan_save_stack+0x26/0x50
[Thu Feb 10 12:59:07 2022]  kasan_set_track+0x25/0x30
[Thu Feb 10 12:59:07 2022]  kasan_set_free_info+0x24/0x40
[Thu Feb 10 12:59:07 2022]  ____kasan_slab_free+0x137/0x170
[Thu Feb 10 12:59:07 2022]  __kasan_slab_free+0x12/0x20
[Thu Feb 10 12:59:07 2022]  slab_free_freelist_hook+0xb3/0x1d0
[Thu Feb 10 12:59:07 2022]  kfree+0xcd/0x520
[Thu Feb 10 12:59:07 2022]  cifs_smb3_do_mount+0x149/0xbe0 [cifs]
[Thu Feb 10 12:59:07 2022]  smb3_get_tree+0x1a0/0x2e0 [cifs]
[Thu Feb 10 12:59:07 2022]  vfs_get_tree+0x52/0x140
[Thu Feb 10 12:59:07 2022]  path_mount+0x635/0x10c0
[Thu Feb 10 12:59:07 2022]  __x64_sys_mount+0x1bf/0x210
[Thu Feb 10 12:59:07 2022]  do_syscall_64+0x5c/0xc0
[Thu Feb 10 12:59:07 2022]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[Thu Feb 10 12:59:07 2022] Last potentially related work creation:
[Thu Feb 10 12:59:07 2022]  kasan_save_stack+0x26/0x50
[Thu Feb 10 12:59:07 2022]  __kasan_record_aux_stack+0xb6/0xc0
[Thu Feb 10 12:59:07 2022]  kasan_record_aux_stack_noalloc+0xb/0x10
[Thu Feb 10 12:59:07 2022]  call_rcu+0x76/0x3c0
[Thu Feb 10 12:59:07 2022]  cifs_umount+0xce/0xe0 [cifs]
[Thu Feb 10 12:59:07 2022]  cifs_kill_sb+0xc8/0xe0 [cifs]
[Thu Feb 10 12:59:07 2022]  deactivate_locked_super+0x5d/0xd0
[Thu Feb 10 12:59:07 2022]  cifs_smb3_do_mount+0xab9/0xbe0 [cifs]
[Thu Feb 10 12:59:07 2022]  smb3_get_tree+0x1a0/0x2e0 [cifs]
[Thu Feb 10 12:59:07 2022]  vfs_get_tree+0x52/0x140
[Thu Feb 10 12:59:07 2022]  path_mount+0x635/0x10c0
[Thu Feb 10 12:59:07 2022]  __x64_sys_mount+0x1bf/0x210
[Thu Feb 10 12:59:07 2022]  do_syscall_64+0x5c/0xc0
[Thu Feb 10 12:59:07 2022]  entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 143de8d97d79316590475dc2a84513c63c863ddf ]

msg_data_sz return a 32bit value, but size is 16bit. This may lead to a
bit overflow.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5bfa685e62e9ba93c303a9a8db646c7228b9b570 ]

It appears that a read access to GIC[DR]_I[CS]PENDRn doesn't always
result in the pending interrupts being accurately reported if they are
mapped to a HW interrupt. This is particularily visible when acking
the timer interrupt and reading the GICR_ISPENDR1 register immediately
after, for example (the interrupt appears as not-pending while it really
is...).

This is because a HW interrupt has its 'active and pending state' kept
in the *physical* distributor, and not in the virtual one, as mandated
by the spec (this is what allows the direct deactivation). The virtual
distributor only caries the pending and active *states* (note the
plural, as these are two independent and non-overlapping states).

Fix it by reading the HW state back, either from the timer itself or
from the distributor if necessary.

Reported-by: Ricardo Koller <ricarkol@google.com>
Tested-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220208123726.3604198-1-maz@kernel.org


Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40 ]

Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit
and the BTN_LEFT key bit.

As explained in the specification, where a device has a button type
value of 0 (click-pad) or 1 (pressure-pad) there should not be
discrete buttons:
https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report

However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even
though the device is a buttonpad and therefore does not have those
buttons.

This behavior has forced userspace applications like libinput to
implement different workarounds and quirks to detect buttonpads and
offer to the user the right set of features and configuration options.
For more information:
https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726



In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key
bits when the input device is register if the INPUT_PROP_BUTTONPAD
property bit is set.

Notice that this change will not affect udev because it does not check
for buttons. See systemd/src/udev/udev-builtin-input_id.c.

List of known affected hardware:

 - Chuwi AeroBook Plus
 - Chuwi Gemibook
 - Framework Laptop
 - GPD Win Max
 - Huawei MateBook 2020
 - Prestigio Smartbook 141 C2
 - Purism Librem 14v1
 - StarLite Mk II   - AMI firmware
 - StarLite Mk II   - Coreboot firmware
 - StarLite Mk III  - AMI firmware
 - StarLite Mk III  - Coreboot firmware
 - StarLabTop Mk IV - AMI firmware
 - StarLabTop Mk IV - Coreboot firmware
 - StarBook Mk V

Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20220208174806.17183-1-jose.exposito89@gmail.com


Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>