diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index ecc74fa4bfde8a55d9fee00d96ae5ae4123560e9..0b3de80ec8f69c1aef9dfaa59fb86c14395ba43e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -4077,6 +4077,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
sector if the number is odd);
i = IGNORE_DEVICE (don't bind to this
device);
+ j = NO_REPORT_LUNS (don't use report luns
+ command, uas only);
l = NOT_LOCKABLE (don't try to lock and
unlock ejectable media);
m = MAX_SECTORS_64 (don't transfer more
diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt
index 7d66a8636cb5d16530194445d9000b2d9064197e..5faf514047e9f8f9c52d5a1549221cccc0090a45 100644
--- a/Documentation/usb/gadget_multi.txt
+++ b/Documentation/usb/gadget_multi.txt
@@ -43,7 +43,7 @@ For the gadget two work under Windows two conditions have to be met:
First of all, Windows need to detect the gadget as an USB composite
gadget which on its own have some conditions[4]. If they are met,
Windows lets USB Generic Parent Driver[5] handle the device which then
-tries to much drivers for each individual interface (sort of, don't
+tries to match drivers for each individual interface (sort of, don't
get into too many details).
The good news is: you do not have to worry about most of the
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 83fd30b0577c55f33eace402617ff3a2a4b09126..a6c4a1b895bd4e5acdab56b4a5a5abf512be6244 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -744,11 +744,15 @@ static void acm_tty_flush_chars(struct tty_struct *tty)
int err;
unsigned long flags;
+ if (!cur) /* nothing to do */
+ return;
+
acm->putbuffer = NULL;
err = usb_autopm_get_interface_async(acm->control);
spin_lock_irqsave(&acm->write_lock, flags);
if (err < 0) {
cur->use = 0;
+ acm->putbuffer = cur;
goto out;
}
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index f9d42cf23e55f80104066f6c38b6deda9943f458..7859d738df418f5c3447a8f524d4d8a922299299 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -73,6 +73,15 @@ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
if (companion->bus != pdev->bus ||
PCI_SLOT(companion->devfn) != slot)
continue;
+
+ /*
+ * Companion device should be either UHCI,OHCI or EHCI host
+ * controller, otherwise skip.
+ */
+ if (companion->class != CL_UHCI && companion->class != CL_OHCI &&
+ companion->class != CL_EHCI)
+ continue;
+
companion_hcd = pci_get_drvdata(companion);
if (!companion_hcd || !companion_hcd->self.root_hub)
continue;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 80c1de239e9acef58b0e92ce2d4add8e437320dd..bad0d1f9a41d4ff9edbcb186eb86238abf878c74 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1861,6 +1861,12 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
kfree(xhci->rh_bw);
kfree(xhci->ext_caps);
+ xhci->usb2_ports = NULL;
+ xhci->usb3_ports = NULL;
+ xhci->port_array = NULL;
+ xhci->rh_bw = NULL;
+ xhci->ext_caps = NULL;
+
xhci->page_size = 0;
xhci->page_shift = 0;
xhci->bus_state[0].bus_suspended = 0;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index f0640b7a1c42e2b82c4b8c6071fa0c43561ab7e7..48672fac7ff3eb22389acfb4889a513e8ac79948 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -48,6 +48,7 @@
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f
#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8
+#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8
static const char hcd_name[] = "xhci_hcd";
@@ -155,7 +156,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI)) {
+ pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) {
xhci->quirks |= XHCI_PME_STUCK_QUIRK;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
@@ -302,6 +304,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
struct xhci_hcd *xhci;
xhci = hcd_to_xhci(pci_get_drvdata(dev));
+ xhci->xhc_state |= XHCI_STATE_REMOVING;
if (xhci->shared_hcd) {
usb_remove_hcd(xhci->shared_hcd);
usb_put_hcd(xhci->shared_hcd);
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 5c15e9bc5f7a418e2c56645a2a753e659d20167a..474b5fa149007b8869f56671b6e3fed1050b9edf 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -39,12 +39,25 @@ static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+
/*
* As of now platform drivers don't provide MSI support so we ensure
* here that the generic code does not try to make a pci_dev from our
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT;
+
+ /*
+ * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
+ * to 1. However, these SoCs don't support 64-bit address memory
+ * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
+ * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
+ * xhci_gen_setup().
+ */
+ if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
+ xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3))
+ xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
}
/* called during probe() after chip reset completes */
diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
index 5a2e2e3936c4c69e50959e37c04562fbc0439b1f..529c3c40f901df69250cc7d05502bb41177fa329 100644
--- a/drivers/usb/host/xhci-plat.h
+++ b/drivers/usb/host/xhci-plat.h
@@ -14,7 +14,7 @@
#include "xhci.h" /* for hcd_to_xhci() */
enum xhci_plat_type {
- XHCI_PLAT_TYPE_MARVELL_ARMADA,
+ XHCI_PLAT_TYPE_MARVELL_ARMADA = 1,
XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3,
};
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7cf66212ceae0cfbe1c161877044755057373781..99b4ff42f7a0148afa63c0da65371c4bee522664 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -4004,7 +4004,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
int reserved_trbs = xhci->cmd_ring_reserved_trbs;
int ret;
- if (xhci->xhc_state) {
+ if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+ (xhci->xhc_state & XHCI_STATE_HALTED)) {
xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
return -ESHUTDOWN;
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index d51ee0c3cf9f009d3f9098bfa77434a6ed4695b6..9e71c96ad74a8de43f78f611f1b8db5490007995 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -147,7 +147,8 @@ static int xhci_start(struct xhci_hcd *xhci)
"waited %u microseconds.\n",
XHCI_MAX_HALT_USEC);
if (!ret)
- xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+ /* clear state flags. Including dying, halted or removing */
+ xhci->xhc_state = 0;
return ret;
}
@@ -1108,8 +1109,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* Resume root hubs only when have pending events. */
status = readl(&xhci->op_regs->status);
if (status & STS_EINT) {
- usb_hcd_resume_root_hub(hcd);
usb_hcd_resume_root_hub(xhci->shared_hcd);
+ usb_hcd_resume_root_hub(hcd);
}
}
@@ -1124,10 +1125,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* Re-enable port polling. */
xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
- set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
- usb_hcd_poll_rh_status(hcd);
set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
usb_hcd_poll_rh_status(xhci->shared_hcd);
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ usb_hcd_poll_rh_status(hcd);
return retval;
}
@@ -2773,7 +2774,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
if (ret <= 0)
return ret;
xhci = hcd_to_xhci(hcd);
- if (xhci->xhc_state & XHCI_STATE_DYING)
+ if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+ (xhci->xhc_state & XHCI_STATE_REMOVING))
return -ENODEV;
xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
@@ -3820,7 +3822,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
mutex_lock(&xhci->mutex);
- if (xhci->xhc_state) /* dying or halted */
+ if (xhci->xhc_state) /* dying, removing or halted */
goto out;
if (!udev->slot_id) {
@@ -4948,6 +4950,16 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
return retval;
xhci_dbg(xhci, "Reset complete\n");
+ /*
+ * On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0)
+ * of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit
+ * address memory pointers actually. So, this driver clears the AC64
+ * bit of xhci->hcc_params to call dma_set_coherent_mask(dev,
+ * DMA_BIT_MASK(32)) in this xhci_gen_setup().
+ */
+ if (xhci->quirks & XHCI_NO_64BIT_SUPPORT)
+ xhci->hcc_params &= ~BIT(0);
+
/* Set dma_mask and coherent_dma_mask to 64-bits,
* if xHC supports 64-bit addressing */
if (HCC_64BIT_ADDR(xhci->hcc_params) &&
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index e293e0974f48257e32653e9ae30501d09c64ea1c..6c629c97f8ad09e6e292fc4513206cb9a5860ec1 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1605,6 +1605,7 @@ struct xhci_hcd {
*/
#define XHCI_STATE_DYING (1 << 0)
#define XHCI_STATE_HALTED (1 << 1)
+#define XHCI_STATE_REMOVING (1 << 2)
/* Statistics */
int error_bitmask;
unsigned int quirks;
@@ -1641,6 +1642,7 @@ struct xhci_hcd {
#define XHCI_PME_STUCK_QUIRK (1 << 20)
#define XHCI_MTK_HOST (1 << 21)
#define XHCI_SSIC_PORT_UNUSED (1 << 22)
+#define XHCI_NO_64BIT_SUPPORT (1 << 23)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 13e4cc31bc79e61a11539c42b8ea182b3dd6b3af..16bc679dc2fc4b807d0b175ba4914102ce964ec2 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -2,7 +2,7 @@
* USB Attached SCSI
* Note that this is not the same as the USB Mass Storage driver
*
- * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2014
+ * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
* Copyright Matthew Wilcox for Intel Corp, 2010
* Copyright Sarah Sharp for Intel Corp, 2010
*
@@ -781,6 +781,17 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
return SUCCESS;
}
+static int uas_target_alloc(struct scsi_target *starget)
+{
+ struct uas_dev_info *devinfo = (struct uas_dev_info *)
+ dev_to_shost(starget->dev.parent)->hostdata;
+
+ if (devinfo->flags & US_FL_NO_REPORT_LUNS)
+ starget->no_report_luns = 1;
+
+ return 0;
+}
+
static int uas_slave_alloc(struct scsi_device *sdev)
{
struct uas_dev_info *devinfo =
@@ -824,7 +835,6 @@ static int uas_slave_configure(struct scsi_device *sdev)
if (devinfo->flags & US_FL_BROKEN_FUA)
sdev->broken_fua = 1;
- scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
return 0;
}
@@ -832,6 +842,7 @@ static struct scsi_host_template uas_host_template = {
.module = THIS_MODULE,
.name = "uas",
.queuecommand = uas_queuecommand,
+ .target_alloc = uas_target_alloc,
.slave_alloc = uas_slave_alloc,
.slave_configure = uas_slave_configure,
.eh_abort_handler = uas_eh_abort_handler,
@@ -956,6 +967,12 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
if (result)
goto set_alt0;
+ /*
+ * 1 tag is reserved for untagged commands +
+ * 1 tag to avoid off by one errors in some bridge firmwares
+ */
+ shost->can_queue = devinfo->qdepth - 2;
+
usb_set_intfdata(intf, shost);
result = scsi_add_host(shost, &intf->dev);
if (result)
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index ccc113e83d88e2b1e69e207989a5d5b49d526ae2..53341a77d89f275b44f9baf44f6caa25d7675802 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -64,6 +64,13 @@ UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+/* Reported-by: David Webb <djw@noc.ac.uk> */
+UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999,
+ "Seagate",
+ "Expansion Desk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_LUNS),
+
/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999,
"Seagate",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 43576ed31ccdc4bfcfcafba0f95e6006a6bd63b6..9de988a0f856d3d8e220b47e7fe1c8e93cd11c00 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -482,7 +482,7 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
- US_FL_MAX_SECTORS_240);
+ US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS);
p = quirks;
while (*p) {
@@ -532,6 +532,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
case 'i':
f |= US_FL_IGNORE_DEVICE;
break;
+ case 'j':
+ f |= US_FL_NO_REPORT_LUNS;
+ break;
case 'l':
f |= US_FL_NOT_LOCKABLE;
break;
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 7f5f78bd15ad448414fa8c06fb61fa25fb152b5f..245f57dbbb614e818d2f067f1f5c431d7e9f193b 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -79,6 +79,8 @@
/* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */ \
US_FLAG(MAX_SECTORS_240, 0x08000000) \
/* Sets max_sectors to 240 */ \
+ US_FLAG(NO_REPORT_LUNS, 0x10000000) \
+ /* Cannot handle REPORT_LUNS */ \
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };