diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
new file mode 100644
index 0000000000000000000000000000000000000000..46d0af1f0872913e905ac0d7ba40cbbdbcdbbbf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -0,0 +1,183 @@
+NXP i.MX System Controller Firmware (SCFW)
+--------------------------------------------------------------------
+
+The System Controller Firmware (SCFW) is a low-level system function
+which runs on a dedicated Cortex-M core to provide power, clock, and
+resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+(QM, QP), and i.MX8QX (QXP, DX).
+
+The AP communicates with the SC using a multi-ported MU module found
+in the LSIO subsystem. The current definition of this MU module provides
+5 remote AP connections to the SC to support up to 5 execution environments
+(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+using the MSI bus.
+
+System Controller Device Node:
+============================================================
+
+The scu node with the following properties shall be under the /firmware/ node.
+
+Required properties:
+-------------------
+- compatible: should be "fsl,imx-scu".
+- mbox-names: should include "tx0", "tx1", "tx2", "tx3",
+ "rx0", "rx1", "rx2", "rx3".
+- mboxes: List of phandle of 4 MU channels for tx and 4 MU channels
+ for rx. All 8 MU channels must be in the same MU instance.
+ Cross instances are not allowed. The MU instance can only
+ be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
+ to make sure use the one which is not conflict with other
+ execution environments. e.g. ATF.
+ Note:
+ Channel 0 must be "tx0" or "rx0".
+ Channel 1 must be "tx1" or "rx1".
+ Channel 2 must be "tx2" or "rx2".
+ Channel 3 must be "tx3" or "rx3".
+ e.g.
+ mboxes = <&lsio_mu1 0 0
+ &lsio_mu1 0 1
+ &lsio_mu1 0 2
+ &lsio_mu1 0 3
+ &lsio_mu1 1 0
+ &lsio_mu1 1 1
+ &lsio_mu1 1 2
+ &lsio_mu1 1 3>;
+ See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+ for detailed mailbox binding.
+
+i.MX SCU Client Device Node:
+============================================================
+
+Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+Power domain bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding for the SCU power domain providers uses the generic power
+domain binding[2].
+
+Required properties:
+- compatible: Should be "fsl,scu-pd".
+- #address-cells: Should be 1.
+- #size-cells: Should be 0.
+
+Required properties for power domain sub nodes:
+- #power-domain-cells: Must be 0.
+
+Optional Properties:
+- reg: Resource ID of this power domain.
+ No exist means uncontrollable by user.
+ See detailed Resource ID list from:
+ include/dt-bindings/power/imx-rsrc.h
+- power-domains: phandle pointing to the parent power domain.
+
+Clock bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding uses the common clock binding[1].
+
+Required properties:
+- compatible: Should be "fsl,imx8qxp-clock".
+- #clock-cells: Should be 1. Contains the Clock ID value.
+- clocks: List of clock specifiers, must contain an entry for
+ each required entry in clock-names
+- clock-names: Should include entries "xtal_32KHz", "xtal_24MHz"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.
+
+See the full list of clock IDs from:
+include/dt-bindings/clock/imx8qxp-clock.h
+
+Pinctrl bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding uses the i.MX common pinctrl binding[3].
+
+Required properties:
+- compatible: Should be "fsl,imx8qxp-iomuxc".
+
+Required properties for Pinctrl sub nodes:
+- fsl,pins: Each entry consists of 3 integers which represents
+ the mux and config setting for one pin. The first 2
+ integers <pin_id mux_mode> are specified using a
+ PIN_FUNC_ID macro, which can be found in
+ <dt-bindings/pinctrl/pads-imx8qxp.h>.
+ The last integer CONFIG is the pad setting value like
+ pull-up on this pin.
+
+ Please refer to i.MX8QXP Reference Manual for detailed
+ CONFIG settings.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/power/power_domain.txt
+[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
+
+Example (imx8qxp):
+-------------
+lsio_mu1: mailbox@5d1c0000 {
+ ...
+ #mbox-cells = <2>;
+};
+
+firmware {
+ scu {
+ compatible = "fsl,imx-scu";
+ mbox-names = "tx0", "tx1", "tx2", "tx3",
+ "rx0", "rx1", "rx2", "rx3";
+ mboxes = <&lsio_mu1 0 0
+ &lsio_mu1 0 1
+ &lsio_mu1 0 2
+ &lsio_mu1 0 3
+ &lsio_mu1 1 0
+ &lsio_mu1 1 1
+ &lsio_mu1 1 2
+ &lsio_mu1 1 3>;
+
+ clk: clk {
+ compatible = "fsl,imx8qxp-clk";
+ #clock-cells = <1>;
+ };
+
+ iomuxc {
+ compatible = "fsl,imx8qxp-iomuxc";
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ SC_P_UART0_RX_ADMA_UART0_RX 0x06000020
+ SC_P_UART0_TX_ADMA_UART0_TX 0x06000020
+ >;
+ };
+ ...
+ };
+
+ imx8qx-pm {
+ compatible = "fsl,scu-pd";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_dma: dma-power-domain {
+ #power-domain-cells = <0>;
+
+ pd_dma_lpuart0: dma-lpuart0@57 {
+ reg = <SC_R_UART_0>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_dma>;
+ };
+ ...
+ };
+ ...
+ };
+ };
+};
+
+serial@5a060000 {
+ ...
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ clocks = <&clk IMX8QXP_UART0_CLK>,
+ <&clk IMX8QXP_UART0_IPG_CLK>;
+ clock-names = "per", "ipg";
+ power-domains = <&pd_dma_lpuart0>;
+};
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
index 31f5f9a104cca5f24cd4cd3c240b791530257524..b56a02c10ae6ecd6be666f4fc1c0f61bb11dfd6f 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
@@ -45,11 +45,15 @@ Optional Properties:
debug_messages - Map the Debug message region
- reg: register space corresponding to the debug_messages
- ti,system-reboot-controller: If system reboot can be triggered by SoC reboot
+- ti,host-id: Integer value corresponding to the host ID assigned by Firmware
+ for identification of host processing entities such as virtual
+ machines
Example (K2G):
-------------
pmmc: pmmc {
compatible = "ti,k2g-sci";
+ ti,host-id = <2>;
mbox-names = "rx", "tx";
mboxes= <&msgmgr &msgmgr_proxy_pmmc_rx>,
<&msgmgr &msgmgr_proxy_pmmc_tx>;
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
index 5e85749262aee881f720be668b0ad8bd63e54f52..eaee06b2d8f2346829d8d25ddc67658b336f4772 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
@@ -16,11 +16,26 @@ Properties:
- reg:
Usage: required
Value Type: <prop-encoded-array>
- Definition: Start address and the the size of the register region.
+ Definition: The first element specifies the llcc base start address and
+ the size of the register region. The second element specifies
+ the llcc broadcast base address and size of the register region.
+
+- reg-names:
+ Usage: required
+ Value Type: <stringlist>
+ Definition: Register region names. Must be "llcc_base", "llcc_broadcast_base".
+
+- interrupts:
+ Usage: required
+ Definition: The interrupt is associated with the llcc edac device.
+ It's used for llcc cache single and double bit error detection
+ and reporting.
Example:
cache-controller@1100000 {
compatible = "qcom,sdm845-llcc";
- reg = <0x1100000 0x250000>;
+ reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
+ reg-names = "llcc_base", "llcc_broadcast_base";
+ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index fcf6979c0b6d3e0ba95f22ea70e56d103ac77d1e..41f133a4e2fa72014b37083437fdf99b09710172 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -7,16 +7,23 @@ assorted actions.
Required properties:
- compatible: must contain one of the following:
- * "qcom,scm-apq8064" for APQ8064 platforms
- * "qcom,scm-msm8660" for MSM8660 platforms
- * "qcom,scm-msm8690" for MSM8690 platforms
- * "qcom,scm-msm8996" for MSM8996 platforms
- * "qcom,scm-ipq4019" for IPQ4019 platforms
- * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc)
-- clocks: One to three clocks may be required based on compatible.
- * No clock required for "qcom,scm-msm8996", "qcom,scm-ipq4019"
- * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960"
- * Core, iface, and bus clocks required for "qcom,scm"
+ * "qcom,scm-apq8064"
+ * "qcom,scm-apq8084"
+ * "qcom,scm-msm8660"
+ * "qcom,scm-msm8916"
+ * "qcom,scm-msm8960"
+ * "qcom,scm-msm8974"
+ * "qcom,scm-msm8996"
+ * "qcom,scm-msm8998"
+ * "qcom,scm-ipq4019"
+ * "qcom,scm-sdm845"
+ and:
+ * "qcom,scm"
+- clocks: Specifies clocks needed by the SCM interface, if any:
+ * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
+ "qcom,scm-msm8960"
+ * core, iface and bus clocks required for "qcom,scm-apq8084",
+ "qcom,scm-msm8916" and "qcom,scm-msm8974"
- clock-names: Must contain "core" for the core clock, "iface" for the interface
clock and "bus" for the bus clock per the requirements of the compatible.
- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
@@ -26,8 +33,10 @@ Example for MSM8916:
firmware {
scm {
- compatible = "qcom,scm";
- clocks = <&gcc GCC_CRYPTO_CLK> , <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
+ compatible = "qcom,msm8916", "qcom,scm";
+ clocks = <&gcc GCC_CRYPTO_CLK> ,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
};
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
new file mode 100644
index 0000000000000000000000000000000000000000..614bac55df86bd00f21cf12cfa63147ae6020550
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -0,0 +1,82 @@
+-----------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Firmware Interface
+-----------------------------------------------------------------
+
+The zynqmp-firmware node describes the interface to platform firmware.
+ZynqMP has an interface to communicate with secure firmware. Firmware
+driver provides an interface to firmware APIs. Interface APIs can be
+used by any driver to communicate to PMUFW(Platform Management Unit).
+These requests include clock management, pin control, device control,
+power management service, FPGA service and other platform management
+services.
+
+Required properties:
+ - compatible: Must contain: "xlnx,zynqmp-firmware"
+ - method: The method of calling the PM-API firmware layer.
+ Permitted values are:
+ - "smc" : SMC #0, following the SMCCC
+ - "hvc" : HVC #0, following the SMCCC
+
+--------------------------------------------------------------------------
+Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
+Zynq MPSoC firmware interface
+--------------------------------------------------------------------------
+The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
+tree. It reads required input clock frequencies from the devicetree and acts
+as clock provider for all clock consumers of PS clocks.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+
+Required properties:
+ - #clock-cells: Must be 1
+ - compatible: Must contain: "xlnx,zynqmp-clk"
+ - clocks: List of clock specifiers which are external input
+ clocks to the given clock controller. Please refer
+ the next section to find the input clocks for a
+ given controller.
+ - clock-names: List of clock names which are exteral input clocks
+ to the given clock controller. Please refer to the
+ clock bindings for more details.
+
+Input clocks for zynqmp Ultrascale+ clock controller:
+
+The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
+inputs. These required clock inputs are:
+ - pss_ref_clk (PS reference clock)
+ - video_clk (reference clock for video system )
+ - pss_alt_ref_clk (alternative PS reference clock)
+ - aux_ref_clk
+ - gt_crx_ref_clk (transceiver reference clock)
+
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source:
+ - swdt0_ext_clk
+ - swdt1_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - gem2_emio_clk
+ - gem3_emio_clk
+ - mio_clk_XX # with XX = 00..77
+ - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51
+
+
+Output clocks are registered based on clock information received
+from firmware. Output clocks indexes are mentioned in
+include/dt-bindings/clock/xlnx,zynqmp-clk.h.
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ zynqmp_clk: clock-controller {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clk";
+ clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>;
+ clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt
index f747f95eee582419178f2b5fb5ca500b2c9bb137..5f24586c8cf33fcf4bdb6a6e681783e9121df4a9 100644
--- a/Documentation/devicetree/bindings/power/renesas,apmu.txt
+++ b/Documentation/devicetree/bindings/power/renesas,apmu.txt
@@ -8,7 +8,9 @@ Required properties:
- compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback.
Examples with soctypes are:
- "renesas,r8a7743-apmu" (RZ/G1M)
+ - "renesas,r8a7744-apmu" (RZ/G1N)
- "renesas,r8a7745-apmu" (RZ/G1E)
+ - "renesas,r8a77470-apmu" (RZ/G1C)
- "renesas,r8a7790-apmu" (R-Car H2)
- "renesas,r8a7791-apmu" (R-Car M2-W)
- "renesas,r8a7792-apmu" (R-Car V2H)
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 180ae65be753ae43ecc39a294a3a7163bdb517d5..eae2a880155a5a7f8774c7428c38b88c4b3b2975 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -8,8 +8,11 @@ and various coprocessors.
Required properties:
- compatible: Must contain exactly one of the following:
- "renesas,r8a7743-sysc" (RZ/G1M)
+ - "renesas,r8a7744-sysc" (RZ/G1N)
- "renesas,r8a7745-sysc" (RZ/G1E)
- "renesas,r8a77470-sysc" (RZ/G1C)
+ - "renesas,r8a774a1-sysc" (RZ/G2M)
+ - "renesas,r8a774c0-sysc" (RZ/G2E)
- "renesas,r8a7779-sysc" (R-Car H1)
- "renesas,r8a7790-sysc" (R-Car H2)
- "renesas,r8a7791-sysc" (R-Car M2-W)
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
new file mode 100644
index 0000000000000000000000000000000000000000..a62a492843e7070ff23e81ca638ff60dff6c3dc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
@@ -0,0 +1,52 @@
+PDC Global
+======================================
+
+This binding describes a reset-controller found on PDC-Global (Power Domain
+Controller) block for Qualcomm Technologies Inc SDM845 SoCs.
+
+Required properties:
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be:
+ "qcom,sdm845-pdc-global"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: must specify the base address and size of the register
+ space.
+
+- #reset-cells:
+ Usage: required
+ Value type: <uint>
+ Definition: must be 1; cell entry represents the reset index.
+
+Example:
+
+pdc_reset: reset-controller@b2e0000 {
+ compatible = "qcom,sdm845-pdc-global";
+ reg = <0xb2e0000 0x20000>;
+ #reset-cells = <1>;
+};
+
+PDC reset clients
+======================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For a list of all valid reset indices see
+<dt-bindings/reset/qcom,sdm845-pdc.h>
+
+Example:
+
+modem-pil@4080000 {
+ ...
+
+ resets = <&pdc_reset PDC_MODEM_SYNC_RESET>;
+ reset-names = "pdc_reset";
+
+ ...
+};
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index 67e83b02e10b63e33615e7f516618cfe238c84c3..b03c48a1150eae4d4690d25dc83fa4cea8db15cb 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -16,8 +16,11 @@ Required properties:
- "renesas,<soctype>-rst" for R-Car Gen2 and Gen3, and RZ/G
Examples with soctypes are:
- "renesas,r8a7743-rst" (RZ/G1M)
+ - "renesas,r8a7744-rst" (RZ/G1N)
- "renesas,r8a7745-rst" (RZ/G1E)
- "renesas,r8a77470-rst" (RZ/G1C)
+ - "renesas,r8a774a1-rst" (RZ/G2M)
+ - "renesas,r8a774c0-rst" (RZ/G2E)
- "renesas,r8a7778-reset-wdt" (R-Car M1A)
- "renesas,r8a7779-reset-wdt" (R-Car H1)
- "renesas,r8a7790-rst" (R-Car H2)
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt
new file mode 100644
index 0000000000000000000000000000000000000000..436d2106e80da38c6ce5c77629ce92cc882995ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt
@@ -0,0 +1,29 @@
+Amlogic Canvas
+================================
+
+A canvas is a collection of metadata that describes a pixel buffer.
+Those metadata include: width, height, phyaddr, wrapping, block mode
+and endianness.
+
+Many IPs within Amlogic SoCs rely on canvas indexes to read/write pixel data
+rather than use the phy addresses directly. For instance, this is the case for
+the video decoders and the display.
+
+Amlogic SoCs have 256 canvas.
+
+Device Tree Bindings:
+---------------------
+
+Video Lookup Table
+--------------------------
+
+Required properties:
+- compatible: "amlogic,canvas"
+- reg: Base physical address and size of the canvas registers.
+
+Example:
+
+canvas: video-lut@48 {
+ compatible = "amlogic,canvas";
+ reg = <0x0 0x48 0x0 0x14>;
+};
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
index f9987c30f0d52c75eeafdbf3d3c50982ebd9b5f6..5a2ef1726e2a20d4651950c5095ce8f109ed0013 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -19,10 +19,12 @@ IP Pairing
Required properties in pwrap device node.
- compatible:
"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
+ "mediatek,mt6765-pwrap" for MT6765 SoCs
"mediatek,mt6797-pwrap" for MT6797 SoCs
"mediatek,mt7622-pwrap" for MT7622 SoCs
"mediatek,mt8135-pwrap" for MT8135 SoCs
"mediatek,mt8173-pwrap" for MT8173 SoCs
+ "mediatek,mt8183-pwrap" for MT8183 SoCs
- interrupts: IRQ for pwrap in SOC
- reg-names: Must include the following entries:
"pwrap": Main registers base
diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
index c51ade86578c6508bf29c11af8653c68211d2ac3..62dd0748f0efc1a035f5516210925df1d9056ca1 100644
--- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt
+++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
@@ -18,6 +18,7 @@ Required properties:
- "allwinner,sun8i-h3-system-control"
- "allwinner,sun50i-a64-sram-controller" (deprecated)
- "allwinner,sun50i-a64-system-control"
+ - "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"
- reg : sram controller register offset + length
SRAM nodes
@@ -54,6 +55,9 @@ The valid sections compatible for H3 are:
The valid sections compatible for A64 are:
- allwinner,sun50i-a64-sram-c
+The valid sections compatible for H6 are:
+ - allwinner,sun50i-h6-sram-c, allwinner,sun50i-a64-sram-c
+
Devices using SRAM sections
---------------------------
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
index cd5f20bf2582e742c426018d91d31c652767d7fd..4ddff85837da3f3fdf420affd68e516833dbe1fa 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
@@ -12,6 +12,8 @@ Required Properties:
- "renesas,tmu-r8a7740" for the r8a7740 TMU
- "renesas,tmu-r8a7778" for the r8a7778 TMU
- "renesas,tmu-r8a7779" for the r8a7779 TMU
+ - "renesas,tmu-r8a77970" for the r8a77970 TMU
+ - "renesas,tmu-r8a77980" for the r8a77980 TMU
- "renesas,tmu" for any TMU.
This is a fallback for the above renesas,tmu-* entries
diff --git a/Documentation/xilinx/eemi.txt b/Documentation/xilinx/eemi.txt
new file mode 100644
index 0000000000000000000000000000000000000000..0ab686c173be590e4f1136187cc3368dbad33f53
--- /dev/null
+++ b/Documentation/xilinx/eemi.txt
@@ -0,0 +1,67 @@
+---------------------------------------------------------------------
+Xilinx Zynq MPSoC EEMI Documentation
+---------------------------------------------------------------------
+
+Xilinx Zynq MPSoC Firmware Interface
+-------------------------------------
+The zynqmp-firmware node describes the interface to platform firmware.
+ZynqMP has an interface to communicate with secure firmware. Firmware
+driver provides an interface to firmware APIs. Interface APIs can be
+used by any driver to communicate with PMC(Platform Management Controller).
+
+Embedded Energy Management Interface (EEMI)
+----------------------------------------------
+The embedded energy management interface is used to allow software
+components running across different processing clusters on a chip or
+device to communicate with a power management controller (PMC) on a
+device to issue or respond to power management requests.
+
+EEMI ops is a structure containing all eemi APIs supported by Zynq MPSoC.
+The zynqmp-firmware driver maintain all EEMI APIs in zynqmp_eemi_ops
+structure. Any driver who want to communicate with PMC using EEMI APIs
+can call zynqmp_pm_get_eemi_ops().
+
+Example of EEMI ops:
+
+ /* zynqmp-firmware driver maintain all EEMI APIs */
+ struct zynqmp_eemi_ops {
+ int (*get_api_version)(u32 *version);
+ int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
+ };
+
+ static const struct zynqmp_eemi_ops eemi_ops = {
+ .get_api_version = zynqmp_pm_get_api_version,
+ .query_data = zynqmp_pm_query_data,
+ };
+
+Example of EEMI ops usage:
+
+ static const struct zynqmp_eemi_ops *eemi_ops;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ eemi_ops = zynqmp_pm_get_eemi_ops();
+ if (!eemi_ops)
+ return -ENXIO;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+
+IOCTL
+------
+IOCTL API is for device control and configuration. It is not a system
+IOCTL but it is an EEMI API. This API can be used by master to control
+any device specific configuration. IOCTL definitions can be platform
+specific. This API also manage shared device configuration.
+
+The following IOCTL IDs are valid for device control:
+- IOCTL_SET_PLL_FRAC_MODE 8
+- IOCTL_GET_PLL_FRAC_MODE 9
+- IOCTL_SET_PLL_FRAC_DATA 10
+- IOCTL_GET_PLL_FRAC_DATA 11
+
+Refer EEMI API guide [0] for IOCTL specific parameters and other EEMI APIs.
+
+References
+----------
+[0] Embedded Energy Management Interface (EEMI) API guide:
+ https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf
diff --git a/MAINTAINERS b/MAINTAINERS
index 2c7a9b3544ffb93eb455e92b7ea56b2dc23bc94b..85365afe30598013ead89e288a68a16def2e86eb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1471,7 +1471,9 @@ F: arch/arm/mach-mxs/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
F: drivers/clk/imx/
+F: drivers/firmware/imx/
F: drivers/soc/imx/
+F: include/linux/firmware/imx/
F: include/soc/imx/
ARM/FREESCALE VYBRID ARM ARCHITECTURE
@@ -5401,6 +5403,14 @@ L: linux-edac@vger.kernel.org
S: Maintained
F: drivers/edac/ti_edac.c
+EDAC-QCOM
+M: Channagoud Kadabi <ckadabi@codeaurora.org>
+M: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
+L: linux-arm-msm@vger.kernel.org
+L: linux-edac@vger.kernel.org
+S: Maintained
+F: drivers/edac/qcom_edac.c
+
EDIROL UA-101/UA-1000 DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index aeb2eed085988bb853685cc0174b192de0b4f054..94e9431d92b874058944faf0361cf56003154240 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -55,6 +55,12 @@ config ARCH_R7S72100
select SYS_SUPPORTS_SH_MTU2
select RENESAS_OSTM
+config ARCH_R7S9210
+ bool "RZ/A2 (R7S9210)"
+ select PM
+ select PM_GENERIC_DOMAINS
+ select RENESAS_OSTM
+
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
select ARCH_RMOBILE
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index b33dc59d8698d218bacf6fd1117b9814dd5ade6b..5591646cb9bbfd33def30a3f91529acb99c7ed1b 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
+obj-$(CONFIG_ARCH_R7S9210) += setup-r7s9210.o
# CPU reset vector handling objects
cpu-y := platsmp.o headsmp.o
diff --git a/arch/arm/mach-shmobile/setup-r7s9210.c b/arch/arm/mach-shmobile/setup-r7s9210.c
new file mode 100644
index 0000000000000000000000000000000000000000..573fb9955e7eb1e4f2d4928339da79695e7dbe0f
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r7s9210.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * r7s9210 processor support
+ *
+ * Copyright (C) 2018 Renesas Electronics Corporation
+ * Copyright (C) 2018 Chris Brandt
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static const char *const r7s9210_boards_compat_dt[] __initconst = {
+ "renesas,r7s9210",
+ NULL,
+};
+
+DT_MACHINE_START(R7S72100_DT, "Generic R7S9210 (Flattened Device Tree)")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+ .init_early = shmobile_init_delay,
+ .init_late = shmobile_init_late,
+ .dt_compat = r7s9210_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 5a89a957641b5270ed4b370f72e813e16cf1d765..138d8eb58374021378473345cc4240a7e7c56c61 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -302,6 +302,7 @@ config ARCH_ZX
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
+ select ZYNQMP_FIRMWARE
help
This enables support for Xilinx ZynqMP Family
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 6a94aa6a22c27ce90ab996277bbc3d5c2da50781..d84996a4528ead1c3d38ecdf74922b78c12bc2c1 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -156,9 +156,6 @@ static int __init weim_parse_dt(struct platform_device *pdev,
}
for_each_available_child_of_node(pdev->dev.of_node, child) {
- if (!child->name)
- continue;
-
ret = weim_timing_setup(child, base, devtype);
if (ret)
dev_warn(&pdev->dev, "%pOF set timing failed.\n",
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index e4fe954e63a9be53b74397c825bf4f57b06dcca5..a3a2d39280d952e5c51d812a041f61916310c318 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -701,69 +701,7 @@ static int __maybe_unused sysc_runtime_resume(struct device *dev)
return error;
}
-#ifdef CONFIG_PM_SLEEP
-static int sysc_suspend(struct device *dev)
-{
- struct sysc *ddata;
- int error;
-
- ddata = dev_get_drvdata(dev);
-
- if (ddata->cfg.quirks & (SYSC_QUIRK_RESOURCE_PROVIDER |
- SYSC_QUIRK_LEGACY_IDLE))
- return 0;
-
- if (!ddata->enabled)
- return 0;
-
- dev_dbg(ddata->dev, "%s %s\n", __func__,
- ddata->name ? ddata->name : "");
-
- error = pm_runtime_put_sync_suspend(dev);
- if (error < 0) {
- dev_warn(ddata->dev, "%s not idle %i %s\n",
- __func__, error,
- ddata->name ? ddata->name : "");
-
- return 0;
- }
-
- ddata->needs_resume = true;
-
- return 0;
-}
-
-static int sysc_resume(struct device *dev)
-{
- struct sysc *ddata;
- int error;
-
- ddata = dev_get_drvdata(dev);
-
- if (ddata->cfg.quirks & (SYSC_QUIRK_RESOURCE_PROVIDER |
- SYSC_QUIRK_LEGACY_IDLE))
- return 0;
-
- if (ddata->needs_resume) {
- dev_dbg(ddata->dev, "%s %s\n", __func__,
- ddata->name ? ddata->name : "");
-
- error = pm_runtime_get_sync(dev);
- if (error < 0) {
- dev_err(ddata->dev, "%s error %i %s\n",
- __func__, error,
- ddata->name ? ddata->name : "");
-
- return error;
- }
-
- ddata->needs_resume = false;
- }
-
- return 0;
-}
-
-static int sysc_noirq_suspend(struct device *dev)
+static int __maybe_unused sysc_noirq_suspend(struct device *dev)
{
struct sysc *ddata;
@@ -772,21 +710,10 @@ static int sysc_noirq_suspend(struct device *dev)
if (ddata->cfg.quirks & SYSC_QUIRK_LEGACY_IDLE)
return 0;
- if (!(ddata->cfg.quirks & SYSC_QUIRK_RESOURCE_PROVIDER))
- return 0;
-
- if (!ddata->enabled)
- return 0;
-
- dev_dbg(ddata->dev, "%s %s\n", __func__,
- ddata->name ? ddata->name : "");
-
- ddata->needs_resume = true;
-
- return sysc_runtime_suspend(dev);
+ return pm_runtime_force_suspend(dev);
}
-static int sysc_noirq_resume(struct device *dev)
+static int __maybe_unused sysc_noirq_resume(struct device *dev)
{
struct sysc *ddata;
@@ -795,24 +722,10 @@ static int sysc_noirq_resume(struct device *dev)
if (ddata->cfg.quirks & SYSC_QUIRK_LEGACY_IDLE)
return 0;
- if (!(ddata->cfg.quirks & SYSC_QUIRK_RESOURCE_PROVIDER))
- return 0;
-
- if (ddata->needs_resume) {
- dev_dbg(ddata->dev, "%s %s\n", __func__,
- ddata->name ? ddata->name : "");
-
- ddata->needs_resume = false;
-
- return sysc_runtime_resume(dev);
- }
-
- return 0;
+ return pm_runtime_force_resume(dev);
}
-#endif
static const struct dev_pm_ops sysc_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(sysc_suspend, sysc_resume)
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(sysc_noirq_suspend, sysc_noirq_resume)
SET_RUNTIME_PM_OPS(sysc_runtime_suspend,
sysc_runtime_resume,
@@ -845,28 +758,8 @@ struct sysc_revision_quirk {
}
static const struct sysc_revision_quirk sysc_revision_quirks[] = {
- /* These need to use noirq_suspend */
- SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff,
- SYSC_QUIRK_RESOURCE_PROVIDER),
- SYSC_QUIRK("i2c", 0, 0, 0x10, 0x90, 0x5040000a, 0xffffffff,
- SYSC_QUIRK_RESOURCE_PROVIDER),
- SYSC_QUIRK("mcspi", 0, 0, 0x10, -1, 0x40300a0b, 0xffffffff,
- SYSC_QUIRK_RESOURCE_PROVIDER),
- SYSC_QUIRK("prcm", 0, 0, -1, -1, 0x40000100, 0xffffffff,
- SYSC_QUIRK_RESOURCE_PROVIDER),
- SYSC_QUIRK("ocp2scp", 0, 0, 0x10, 0x14, 0x50060005, 0xffffffff,
- SYSC_QUIRK_RESOURCE_PROVIDER),
- SYSC_QUIRK("padconf", 0, 0, 0x10, -1, 0x4fff0800, 0xffffffff,
- SYSC_QUIRK_RESOURCE_PROVIDER),
- SYSC_QUIRK("scm", 0, 0, 0x10, -1, 0x40000900, 0xffffffff,
- SYSC_QUIRK_RESOURCE_PROVIDER),
- SYSC_QUIRK("scrm", 0, 0, -1, -1, 0x00000010, 0xffffffff,
- SYSC_QUIRK_RESOURCE_PROVIDER),
- SYSC_QUIRK("sdma", 0, 0, 0x2c, 0x28, 0x00010900, 0xffffffff,
- SYSC_QUIRK_RESOURCE_PROVIDER),
-
/* These drivers need to be fixed to not use pm_runtime_irq_safe() */
- SYSC_QUIRK("gpio", 0, 0, 0x10, 0x114, 0x50600801, 0xffffffff,
+ SYSC_QUIRK("gpio", 0, 0, 0x10, 0x114, 0x50600801, 0xffff00ff,
SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_OPT_CLKS_IN_RESET),
SYSC_QUIRK("mmu", 0, 0, 0x10, 0x14, 0x00000020, 0xffffffff,
SYSC_QUIRK_LEGACY_IDLE),
@@ -881,38 +774,70 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
SYSC_QUIRK_LEGACY_IDLE),
/* Some timers on omap4 and later */
- SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffffffff,
+ SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x50002100, 0xffffffff,
+ SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffff00ff,
SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
SYSC_QUIRK_LEGACY_IDLE),
/* Uarts on omap4 and later */
- SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffffffff,
+ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff,
SYSC_QUIRK_LEGACY_IDLE),
-
- /* These devices don't yet suspend properly without legacy setting */
- SYSC_QUIRK("sdio", 0, 0, 0x10, -1, 0x40202301, 0xffffffff,
- SYSC_QUIRK_LEGACY_IDLE),
- SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xffffffff,
- SYSC_QUIRK_LEGACY_IDLE),
- SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0d00, 0xffffffff,
+ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
SYSC_QUIRK_LEGACY_IDLE),
#ifdef DEBUG
+ SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0),
+ SYSC_QUIRK("atl", 0, 0, -1, -1, 0x0a070100, 0xffffffff, 0),
SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff, 0),
+ SYSC_QUIRK("cm", 0, 0, -1, -1, 0x40000301, 0xffffffff, 0),
+ SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
+ SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902,
+ 0xffff00f0, 0),
+ SYSC_QUIRK("dcan", 0, 0, -1, -1, 0xffffffff, 0xffffffff, 0),
+ SYSC_QUIRK("dcan", 0, 0, -1, -1, 0x00001401, 0xffffffff, 0),
+ SYSC_QUIRK("dwc3", 0, 0, 0x10, -1, 0x500a0200, 0xffffffff, 0),
+ SYSC_QUIRK("epwmss", 0, 0, 0x4, -1, 0x47400001, 0xffffffff, 0),
SYSC_QUIRK("gpu", 0, 0x1fc00, 0x1fc10, -1, 0, 0, 0),
SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff, 0),
+ SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff, 0),
SYSC_QUIRK("hsi", 0, 0, 0x10, 0x14, 0x50043101, 0xffffffff, 0),
SYSC_QUIRK("iss", 0, 0, 0x10, -1, 0x40000101, 0xffffffff, 0),
+ SYSC_QUIRK("i2c", 0, 0, 0x10, 0x90, 0x5040000a, 0xfffff0f0, 0),
+ SYSC_QUIRK("lcdc", 0, 0, 0x54, -1, 0x4f201000, 0xffffffff, 0),
SYSC_QUIRK("mcasp", 0, 0, 0x4, -1, 0x44306302, 0xffffffff, 0),
+ SYSC_QUIRK("mcasp", 0, 0, 0x4, -1, 0x44307b02, 0xffffffff, 0),
SYSC_QUIRK("mcbsp", 0, -1, 0x8c, -1, 0, 0, 0),
+ SYSC_QUIRK("mcspi", 0, 0, 0x10, -1, 0x40300a0b, 0xffff00ff, 0),
+ SYSC_QUIRK("mcspi", 0, 0, 0x110, 0x114, 0x40300a0b, 0xffffffff, 0),
SYSC_QUIRK("mailbox", 0, 0, 0x10, -1, 0x00000400, 0xffffffff, 0),
+ SYSC_QUIRK("m3", 0, 0, -1, -1, 0x5f580105, 0x0fff0f00, 0),
+ SYSC_QUIRK("ocp2scp", 0, 0, 0x10, 0x14, 0x50060005, 0xfffffff0, 0),
+ SYSC_QUIRK("ocp2scp", 0, 0, -1, -1, 0x50060007, 0xffffffff, 0),
+ SYSC_QUIRK("padconf", 0, 0, 0x10, -1, 0x4fff0800, 0xffffffff, 0),
+ SYSC_QUIRK("prcm", 0, 0, -1, -1, 0x40000100, 0xffffffff, 0),
+ SYSC_QUIRK("prcm", 0, 0, -1, -1, 0x00004102, 0xffffffff, 0),
+ SYSC_QUIRK("prcm", 0, 0, -1, -1, 0x40000400, 0xffffffff, 0),
+ SYSC_QUIRK("scm", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
+ SYSC_QUIRK("scm", 0, 0, -1, -1, 0x4e8b0100, 0xffffffff, 0),
+ SYSC_QUIRK("scm", 0, 0, -1, -1, 0x4f000100, 0xffffffff, 0),
+ SYSC_QUIRK("scm", 0, 0, -1, -1, 0x40000900, 0xffffffff, 0),
+ SYSC_QUIRK("scrm", 0, 0, -1, -1, 0x00000010, 0xffffffff, 0),
+ SYSC_QUIRK("sdio", 0, 0, 0x10, -1, 0x40202301, 0xffff0ff0, 0),
+ SYSC_QUIRK("sdio", 0, 0x2fc, 0x110, 0x114, 0x31010000, 0xffffffff, 0),
+ SYSC_QUIRK("sdma", 0, 0, 0x2c, 0x28, 0x00010900, 0xffffffff, 0),
SYSC_QUIRK("slimbus", 0, 0, 0x10, -1, 0x40000902, 0xffffffff, 0),
SYSC_QUIRK("slimbus", 0, 0, 0x10, -1, 0x40002903, 0xffffffff, 0),
SYSC_QUIRK("spinlock", 0, 0, 0x10, -1, 0x50020000, 0xffffffff, 0),
+ SYSC_QUIRK("rng", 0, 0x1fe0, 0x1fe4, -1, 0x00000020, 0xffffffff, 0),
+ SYSC_QUIRK("rtc", 0, 0x74, 0x78, -1, 0x4eb01908, 0xffff00f0, 0),
+ SYSC_QUIRK("timer32k", 0, 0, 0x4, -1, 0x00000060, 0xffffffff, 0),
SYSC_QUIRK("usbhstll", 0, 0, 0x10, 0x14, 0x00000004, 0xffffffff, 0),
SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, 0x14, 0x50700100, 0xffffffff, 0),
SYSC_QUIRK("usb_otg_hs", 0, 0x400, 0x404, 0x408, 0x00000050,
0xffffffff, 0),
+ SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0, 0),
+ SYSC_QUIRK("vfpe", 0, 0, 0x104, -1, 0x4d001200, 0xffffffff, 0),
#endif
};
@@ -1221,8 +1146,8 @@ static int sysc_child_suspend_noirq(struct device *dev)
if (!pm_runtime_status_suspended(dev)) {
error = pm_generic_runtime_suspend(dev);
if (error) {
- dev_warn(dev, "%s busy at %i: %i\n",
- __func__, __LINE__, error);
+ dev_dbg(dev, "%s busy at %i: %i\n",
+ __func__, __LINE__, error);
return 0;
}
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 292056bbb30e91a39d6e0f2d27b41e4f0e907c8c..1deafb4db60c296c4f4772d1b182cd2362feea37 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -299,5 +299,6 @@ source "drivers/clk/sunxi-ng/Kconfig"
source "drivers/clk/tegra/Kconfig"
source "drivers/clk/ti/Kconfig"
source "drivers/clk/uniphier/Kconfig"
+source "drivers/clk/zynqmp/Kconfig"
endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index a84c5573cabeae1ede83c2e597e8d310bc98d307..ad11421bdacd8a64f571d581fdccc39791f73835 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -108,3 +108,4 @@ obj-$(CONFIG_X86) += x86/
endif
obj-$(CONFIG_ARCH_ZX) += zte/
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
+obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/
diff --git a/drivers/clk/zynqmp/Kconfig b/drivers/clk/zynqmp/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..17086059be8b218179bd2f9625cb40fee41956ce
--- /dev/null
+++ b/drivers/clk/zynqmp/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config COMMON_CLK_ZYNQMP
+ bool "Support for Xilinx ZynqMP Ultrascale+ clock controllers"
+ depends on ARCH_ZYNQMP || COMPILE_TEST
+ depends on ZYNQMP_FIRMWARE
+ help
+ Support for the Zynqmp Ultrascale clock controller.
+ It has a dependency on the PMU firmware.
+ Say Y if you want to include clock support.
diff --git a/drivers/clk/zynqmp/Makefile b/drivers/clk/zynqmp/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..0ec24bfe0f18f5120e97de61c25d5597e63cbc00
--- /dev/null
+++ b/drivers/clk/zynqmp/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+# Zynq Ultrascale+ MPSoC clock specific Makefile
+
+obj-$(CONFIG_ARCH_ZYNQMP) += pll.o clk-gate-zynqmp.o divider.o clk-mux-zynqmp.o clkc.o
diff --git a/drivers/clk/zynqmp/clk-gate-zynqmp.c b/drivers/clk/zynqmp/clk-gate-zynqmp.c
new file mode 100644
index 0000000000000000000000000000000000000000..83b236f20fff96d8e6381a5e7f09fdb5c7cbf292
--- /dev/null
+++ b/drivers/clk/zynqmp/clk-gate-zynqmp.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC clock controller
+ *
+ * Copyright (C) 2016-2018 Xilinx
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/**
+ * struct clk_gate - gating clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @flags: hardware-specific flags
+ * @clk_id: Id of clock
+ */
+struct zynqmp_clk_gate {
+ struct clk_hw hw;
+ u8 flags;
+ u32 clk_id;
+};
+
+#define to_zynqmp_clk_gate(_hw) container_of(_hw, struct zynqmp_clk_gate, hw)
+
+/**
+ * zynqmp_clk_gate_enable() - Enable clock
+ * @hw: handle between common and hardware-specific interfaces
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_clk_gate_enable(struct clk_hw *hw)
+{
+ struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = gate->clk_id;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_enable(clk_id);
+
+ if (ret)
+ pr_warn_once("%s() clock enabled failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return ret;
+}
+
+/*
+ * zynqmp_clk_gate_disable() - Disable clock
+ * @hw: handle between common and hardware-specific interfaces
+ */
+static void zynqmp_clk_gate_disable(struct clk_hw *hw)
+{
+ struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = gate->clk_id;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_disable(clk_id);
+
+ if (ret)
+ pr_warn_once("%s() clock disable failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+}
+
+/**
+ * zynqmp_clk_gate_is_enable() - Check clock state
+ * @hw: handle between common and hardware-specific interfaces
+ *
+ * Return: 1 if enabled, 0 if disabled else error code
+ */
+static int zynqmp_clk_gate_is_enabled(struct clk_hw *hw)
+{
+ struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = gate->clk_id;
+ int state, ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_getstate(clk_id, &state);
+ if (ret) {
+ pr_warn_once("%s() clock get state failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+ return -EIO;
+ }
+
+ return state ? 1 : 0;
+}
+
+static const struct clk_ops zynqmp_clk_gate_ops = {
+ .enable = zynqmp_clk_gate_enable,
+ .disable = zynqmp_clk_gate_disable,
+ .is_enabled = zynqmp_clk_gate_is_enabled,
+};
+
+/**
+ * zynqmp_clk_register_gate() - Register a gate clock with the clock framework
+ * @name: Name of this clock
+ * @clk_id: Id of this clock
+ * @parents: Name of this clock's parents
+ * @num_parents: Number of parents
+ * @nodes: Clock topology node
+ *
+ * Return: clock hardware of the registered clock gate
+ */
+struct clk_hw *zynqmp_clk_register_gate(const char *name, u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes)
+{
+ struct zynqmp_clk_gate *gate;
+ struct clk_hw *hw;
+ int ret;
+ struct clk_init_data init;
+
+ /* allocate the gate */
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &zynqmp_clk_gate_ops;
+ init.flags = nodes->flag;
+ init.parent_names = parents;
+ init.num_parents = 1;
+
+ /* struct clk_gate assignments */
+ gate->flags = nodes->type_flag;
+ gate->hw.init = &init;
+ gate->clk_id = clk_id;
+
+ hw = &gate->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ kfree(gate);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c
new file mode 100644
index 0000000000000000000000000000000000000000..4143f560c28d67d3cd7b2799c99f74099aded436
--- /dev/null
+++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC mux
+ *
+ * Copyright (C) 2016-2018 Xilinx
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/*
+ * DOC: basic adjustable multiplexer clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is only affected by parent switching. No clk_set_rate support
+ * parent - parent is adjustable through clk_set_parent
+ */
+
+/**
+ * struct zynqmp_clk_mux - multiplexer clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @flags: hardware-specific flags
+ * @clk_id: Id of clock
+ */
+struct zynqmp_clk_mux {
+ struct clk_hw hw;
+ u8 flags;
+ u32 clk_id;
+};
+
+#define to_zynqmp_clk_mux(_hw) container_of(_hw, struct zynqmp_clk_mux, hw)
+
+/**
+ * zynqmp_clk_mux_get_parent() - Get parent of clock
+ * @hw: handle between common and hardware-specific interfaces
+ *
+ * Return: Parent index
+ */
+static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
+{
+ struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = mux->clk_id;
+ u32 val;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_getparent(clk_id, &val);
+
+ if (ret)
+ pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return val;
+}
+
+/**
+ * zynqmp_clk_mux_set_parent() - Set parent of clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @index: Parent index
+ *
+ * Return: 0 on success else error+reason
+ */
+static int zynqmp_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = mux->clk_id;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_setparent(clk_id, index);
+
+ if (ret)
+ pr_warn_once("%s() set parent failed for clock: %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return ret;
+}
+
+static const struct clk_ops zynqmp_clk_mux_ops = {
+ .get_parent = zynqmp_clk_mux_get_parent,
+ .set_parent = zynqmp_clk_mux_set_parent,
+ .determine_rate = __clk_mux_determine_rate,
+};
+
+static const struct clk_ops zynqmp_clk_mux_ro_ops = {
+ .get_parent = zynqmp_clk_mux_get_parent,
+};
+
+/**
+ * zynqmp_clk_register_mux() - Register a mux table with the clock
+ * framework
+ * @name: Name of this clock
+ * @clk_id: Id of this clock
+ * @parents: Name of this clock's parents
+ * @num_parents: Number of parents
+ * @nodes: Clock topology node
+ *
+ * Return: clock hardware of the registered clock mux
+ */
+struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes)
+{
+ struct zynqmp_clk_mux *mux;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ if (nodes->type_flag & CLK_MUX_READ_ONLY)
+ init.ops = &zynqmp_clk_mux_ro_ops;
+ else
+ init.ops = &zynqmp_clk_mux_ops;
+ init.flags = nodes->flag;
+ init.parent_names = parents;
+ init.num_parents = num_parents;
+ mux->flags = nodes->type_flag;
+ mux->hw.init = &init;
+ mux->clk_id = clk_id;
+
+ hw = &mux->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ kfree(hw);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
+EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux);
diff --git a/drivers/clk/zynqmp/clk-zynqmp.h b/drivers/clk/zynqmp/clk-zynqmp.h
new file mode 100644
index 0000000000000000000000000000000000000000..7ab163b67249f277144c3283a4f34d01e5351213
--- /dev/null
+++ b/drivers/clk/zynqmp/clk-zynqmp.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016-2018 Xilinx
+ */
+
+#ifndef __LINUX_CLK_ZYNQMP_H_
+#define __LINUX_CLK_ZYNQMP_H_
+
+#include <linux/spinlock.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+
+/* Clock APIs payload parameters */
+#define CLK_GET_NAME_RESP_LEN 16
+#define CLK_GET_TOPOLOGY_RESP_WORDS 3
+#define CLK_GET_PARENTS_RESP_WORDS 3
+#define CLK_GET_ATTR_RESP_WORDS 1
+
+enum topology_type {
+ TYPE_INVALID,
+ TYPE_MUX,
+ TYPE_PLL,
+ TYPE_FIXEDFACTOR,
+ TYPE_DIV1,
+ TYPE_DIV2,
+ TYPE_GATE,
+};
+
+/**
+ * struct clock_topology - Clock topology
+ * @type: Type of topology
+ * @flag: Topology flags
+ * @type_flag: Topology type specific flag
+ */
+struct clock_topology {
+ u32 type;
+ u32 flag;
+ u32 type_flag;
+};
+
+struct clk_hw *zynqmp_clk_register_pll(const char *name, u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes);
+
+struct clk_hw *zynqmp_clk_register_gate(const char *name, u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes);
+
+struct clk_hw *zynqmp_clk_register_divider(const char *name,
+ u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes);
+
+struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes);
+
+struct clk_hw *zynqmp_clk_register_fixed_factor(const char *name,
+ u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes);
+
+#endif
diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c
new file mode 100644
index 0000000000000000000000000000000000000000..9d7d297f0ea8d9b0fbc5c5e5a02c172b0ae14064
--- /dev/null
+++ b/drivers/clk/zynqmp/clkc.c
@@ -0,0 +1,716 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC clock controller
+ *
+ * Copyright (C) 2016-2018 Xilinx
+ *
+ * Based on drivers/clk/zynq/clkc.c
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include "clk-zynqmp.h"
+
+#define MAX_PARENT 100
+#define MAX_NODES 6
+#define MAX_NAME_LEN 50
+
+#define CLK_TYPE_SHIFT 2
+
+#define PM_API_PAYLOAD_LEN 3
+
+#define NA_PARENT 0xFFFFFFFF
+#define DUMMY_PARENT 0xFFFFFFFE
+
+#define CLK_TYPE_FIELD_LEN 4
+#define CLK_TOPOLOGY_NODE_OFFSET 16
+#define NODES_PER_RESP 3
+
+#define CLK_TYPE_FIELD_MASK 0xF
+#define CLK_FLAG_FIELD_MASK GENMASK(21, 8)
+#define CLK_TYPE_FLAG_FIELD_MASK GENMASK(31, 24)
+
+#define CLK_PARENTS_ID_LEN 16
+#define CLK_PARENTS_ID_MASK 0xFFFF
+
+/* Flags for parents */
+#define PARENT_CLK_SELF 0
+#define PARENT_CLK_NODE1 1
+#define PARENT_CLK_NODE2 2
+#define PARENT_CLK_NODE3 3
+#define PARENT_CLK_NODE4 4
+#define PARENT_CLK_EXTERNAL 5
+
+#define END_OF_CLK_NAME "END_OF_CLK"
+#define END_OF_TOPOLOGY_NODE 1
+#define END_OF_PARENTS 1
+#define RESERVED_CLK_NAME ""
+
+#define CLK_VALID_MASK 0x1
+
+enum clk_type {
+ CLK_TYPE_OUTPUT,
+ CLK_TYPE_EXTERNAL,
+};
+
+/**
+ * struct clock_parent - Clock parent
+ * @name: Parent name
+ * @id: Parent clock ID
+ * @flag: Parent flags
+ */
+struct clock_parent {
+ char name[MAX_NAME_LEN];
+ int id;
+ u32 flag;
+};
+
+/**
+ * struct zynqmp_clock - Clock
+ * @clk_name: Clock name
+ * @valid: Validity flag of clock
+ * @type: Clock type (Output/External)
+ * @node: Clock topology nodes
+ * @num_nodes: Number of nodes present in topology
+ * @parent: Parent of clock
+ * @num_parents: Number of parents of clock
+ */
+struct zynqmp_clock {
+ char clk_name[MAX_NAME_LEN];
+ u32 valid;
+ enum clk_type type;
+ struct clock_topology node[MAX_NODES];
+ u32 num_nodes;
+ struct clock_parent parent[MAX_PARENT];
+ u32 num_parents;
+};
+
+static const char clk_type_postfix[][10] = {
+ [TYPE_INVALID] = "",
+ [TYPE_MUX] = "_mux",
+ [TYPE_GATE] = "",
+ [TYPE_DIV1] = "_div1",
+ [TYPE_DIV2] = "_div2",
+ [TYPE_FIXEDFACTOR] = "_ff",
+ [TYPE_PLL] = ""
+};
+
+static struct clk_hw *(* const clk_topology[]) (const char *name, u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes)
+ = {
+ [TYPE_INVALID] = NULL,
+ [TYPE_MUX] = zynqmp_clk_register_mux,
+ [TYPE_PLL] = zynqmp_clk_register_pll,
+ [TYPE_FIXEDFACTOR] = zynqmp_clk_register_fixed_factor,
+ [TYPE_DIV1] = zynqmp_clk_register_divider,
+ [TYPE_DIV2] = zynqmp_clk_register_divider,
+ [TYPE_GATE] = zynqmp_clk_register_gate
+};
+
+static struct zynqmp_clock *clock;
+static struct clk_hw_onecell_data *zynqmp_data;
+static unsigned int clock_max_idx;
+static const struct zynqmp_eemi_ops *eemi_ops;
+
+/**
+ * zynqmp_is_valid_clock() - Check whether clock is valid or not
+ * @clk_id: Clock index
+ *
+ * Return: 1 if clock is valid, 0 if clock is invalid else error code
+ */
+static inline int zynqmp_is_valid_clock(u32 clk_id)
+{
+ if (clk_id > clock_max_idx)
+ return -ENODEV;
+
+ return clock[clk_id].valid;
+}
+
+/**
+ * zynqmp_get_clock_name() - Get name of clock from Clock index
+ * @clk_id: Clock index
+ * @clk_name: Name of clock
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_get_clock_name(u32 clk_id, char *clk_name)
+{
+ int ret;
+
+ ret = zynqmp_is_valid_clock(clk_id);
+ if (ret == 1) {
+ strncpy(clk_name, clock[clk_id].clk_name, MAX_NAME_LEN);
+ return 0;
+ }
+
+ return ret == 0 ? -EINVAL : ret;
+}
+
+/**
+ * zynqmp_get_clock_type() - Get type of clock
+ * @clk_id: Clock index
+ * @type: Clock type: CLK_TYPE_OUTPUT or CLK_TYPE_EXTERNAL
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_get_clock_type(u32 clk_id, u32 *type)
+{
+ int ret;
+
+ ret = zynqmp_is_valid_clock(clk_id);
+ if (ret == 1) {
+ *type = clock[clk_id].type;
+ return 0;
+ }
+
+ return ret == 0 ? -EINVAL : ret;
+}
+
+/**
+ * zynqmp_pm_clock_get_num_clocks() - Get number of clocks in system
+ * @nclocks: Number of clocks in system/board.
+ *
+ * Call firmware API to get number of clocks.
+ *
+ * Return: 0 on success else error code.
+ */
+static int zynqmp_pm_clock_get_num_clocks(u32 *nclocks)
+{
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ qdata.qid = PM_QID_CLOCK_GET_NUM_CLOCKS;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+ *nclocks = ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_get_name() - Get the name of clock for given id
+ * @clock_id: ID of the clock to be queried
+ * @name: Name of given clock
+ *
+ * This function is used to get name of clock specified by given
+ * clock ID.
+ *
+ * Return: Returns 0, in case of error name would be 0
+ */
+static int zynqmp_pm_clock_get_name(u32 clock_id, char *name)
+{
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+
+ qdata.qid = PM_QID_CLOCK_GET_NAME;
+ qdata.arg1 = clock_id;
+
+ eemi_ops->query_data(qdata, ret_payload);
+ memcpy(name, ret_payload, CLK_GET_NAME_RESP_LEN);
+
+ return 0;
+}
+
+/**
+ * zynqmp_pm_clock_get_topology() - Get the topology of clock for given id
+ * @clock_id: ID of the clock to be queried
+ * @index: Node index of clock topology
+ * @topology: Buffer to store nodes in topology and flags
+ *
+ * This function is used to get topology information for the clock
+ * specified by given clock ID.
+ *
+ * This API will return 3 node of topology with a single response. To get
+ * other nodes, master should call same API in loop with new
+ * index till error is returned. E.g First call should have
+ * index 0 which will return nodes 0,1 and 2. Next call, index
+ * should be 3 which will return nodes 3,4 and 5 and so on.
+ *
+ * Return: 0 on success else error+reason
+ */
+static int zynqmp_pm_clock_get_topology(u32 clock_id, u32 index, u32 *topology)
+{
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ qdata.qid = PM_QID_CLOCK_GET_TOPOLOGY;
+ qdata.arg1 = clock_id;
+ qdata.arg2 = index;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+ memcpy(topology, &ret_payload[1], CLK_GET_TOPOLOGY_RESP_WORDS * 4);
+
+ return ret;
+}
+
+/**
+ * zynqmp_clk_register_fixed_factor() - Register fixed factor with the
+ * clock framework
+ * @name: Name of this clock
+ * @clk_id: Clock ID
+ * @parents: Name of this clock's parents
+ * @num_parents: Number of parents
+ * @nodes: Clock topology node
+ *
+ * Return: clock hardware to the registered clock
+ */
+struct clk_hw *zynqmp_clk_register_fixed_factor(const char *name, u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes)
+{
+ u32 mult, div;
+ struct clk_hw *hw;
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ qdata.qid = PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS;
+ qdata.arg1 = clk_id;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+ mult = ret_payload[1];
+ div = ret_payload[2];
+
+ hw = clk_hw_register_fixed_factor(NULL, name,
+ parents[0],
+ nodes->flag, mult,
+ div);
+
+ return hw;
+}
+
+/**
+ * zynqmp_pm_clock_get_parents() - Get the first 3 parents of clock for given id
+ * @clock_id: Clock ID
+ * @index: Parent index
+ * @parents: 3 parents of the given clock
+ *
+ * This function is used to get 3 parents for the clock specified by
+ * given clock ID.
+ *
+ * This API will return 3 parents with a single response. To get
+ * other parents, master should call same API in loop with new
+ * parent index till error is returned. E.g First call should have
+ * index 0 which will return parents 0,1 and 2. Next call, index
+ * should be 3 which will return parent 3,4 and 5 and so on.
+ *
+ * Return: 0 on success else error+reason
+ */
+static int zynqmp_pm_clock_get_parents(u32 clock_id, u32 index, u32 *parents)
+{
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ qdata.qid = PM_QID_CLOCK_GET_PARENTS;
+ qdata.arg1 = clock_id;
+ qdata.arg2 = index;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+ memcpy(parents, &ret_payload[1], CLK_GET_PARENTS_RESP_WORDS * 4);
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_get_attributes() - Get the attributes of clock for given id
+ * @clock_id: Clock ID
+ * @attr: Clock attributes
+ *
+ * This function is used to get clock's attributes(e.g. valid, clock type, etc).
+ *
+ * Return: 0 on success else error+reason
+ */
+static int zynqmp_pm_clock_get_attributes(u32 clock_id, u32 *attr)
+{
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ qdata.qid = PM_QID_CLOCK_GET_ATTRIBUTES;
+ qdata.arg1 = clock_id;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+ memcpy(attr, &ret_payload[1], CLK_GET_ATTR_RESP_WORDS * 4);
+
+ return ret;
+}
+
+/**
+ * __zynqmp_clock_get_topology() - Get topology data of clock from firmware
+ * response data
+ * @topology: Clock topology
+ * @data: Clock topology data received from firmware
+ * @nnodes: Number of nodes
+ *
+ * Return: 0 on success else error+reason
+ */
+static int __zynqmp_clock_get_topology(struct clock_topology *topology,
+ u32 *data, u32 *nnodes)
+{
+ int i;
+
+ for (i = 0; i < PM_API_PAYLOAD_LEN; i++) {
+ if (!(data[i] & CLK_TYPE_FIELD_MASK))
+ return END_OF_TOPOLOGY_NODE;
+ topology[*nnodes].type = data[i] & CLK_TYPE_FIELD_MASK;
+ topology[*nnodes].flag = FIELD_GET(CLK_FLAG_FIELD_MASK,
+ data[i]);
+ topology[*nnodes].type_flag =
+ FIELD_GET(CLK_TYPE_FLAG_FIELD_MASK, data[i]);
+ (*nnodes)++;
+ }
+
+ return 0;
+}
+
+/**
+ * zynqmp_clock_get_topology() - Get topology of clock from firmware using
+ * PM_API
+ * @clk_id: Clock index
+ * @topology: Clock topology
+ * @num_nodes: Number of nodes
+ *
+ * Return: 0 on success else error+reason
+ */
+static int zynqmp_clock_get_topology(u32 clk_id,
+ struct clock_topology *topology,
+ u32 *num_nodes)
+{
+ int j, ret;
+ u32 pm_resp[PM_API_PAYLOAD_LEN] = {0};
+
+ *num_nodes = 0;
+ for (j = 0; j <= MAX_NODES; j += 3) {
+ ret = zynqmp_pm_clock_get_topology(clk_id, j, pm_resp);
+ if (ret)
+ return ret;
+ ret = __zynqmp_clock_get_topology(topology, pm_resp, num_nodes);
+ if (ret == END_OF_TOPOLOGY_NODE)
+ return 0;
+ }
+
+ return 0;
+}
+
+/**
+ * __zynqmp_clock_get_topology() - Get parents info of clock from firmware
+ * response data
+ * @parents: Clock parents
+ * @data: Clock parents data received from firmware
+ * @nparent: Number of parent
+ *
+ * Return: 0 on success else error+reason
+ */
+static int __zynqmp_clock_get_parents(struct clock_parent *parents, u32 *data,
+ u32 *nparent)
+{
+ int i;
+ struct clock_parent *parent;
+
+ for (i = 0; i < PM_API_PAYLOAD_LEN; i++) {
+ if (data[i] == NA_PARENT)
+ return END_OF_PARENTS;
+
+ parent = &parents[i];
+ parent->id = data[i] & CLK_PARENTS_ID_MASK;
+ if (data[i] == DUMMY_PARENT) {
+ strcpy(parent->name, "dummy_name");
+ parent->flag = 0;
+ } else {
+ parent->flag = data[i] >> CLK_PARENTS_ID_LEN;
+ if (zynqmp_get_clock_name(parent->id, parent->name))
+ continue;
+ }
+ *nparent += 1;
+ }
+
+ return 0;
+}
+
+/**
+ * zynqmp_clock_get_parents() - Get parents info from firmware using PM_API
+ * @clk_id: Clock index
+ * @parents: Clock parents
+ * @num_parents: Total number of parents
+ *
+ * Return: 0 on success else error+reason
+ */
+static int zynqmp_clock_get_parents(u32 clk_id, struct clock_parent *parents,
+ u32 *num_parents)
+{
+ int j = 0, ret;
+ u32 pm_resp[PM_API_PAYLOAD_LEN] = {0};
+
+ *num_parents = 0;
+ do {
+ /* Get parents from firmware */
+ ret = zynqmp_pm_clock_get_parents(clk_id, j, pm_resp);
+ if (ret)
+ return ret;
+
+ ret = __zynqmp_clock_get_parents(&parents[j], pm_resp,
+ num_parents);
+ if (ret == END_OF_PARENTS)
+ return 0;
+ j += PM_API_PAYLOAD_LEN;
+ } while (*num_parents <= MAX_PARENT);
+
+ return 0;
+}
+
+/**
+ * zynqmp_get_parent_list() - Create list of parents name
+ * @np: Device node
+ * @clk_id: Clock index
+ * @parent_list: List of parent's name
+ * @num_parents: Total number of parents
+ *
+ * Return: 0 on success else error+reason
+ */
+static int zynqmp_get_parent_list(struct device_node *np, u32 clk_id,
+ const char **parent_list, u32 *num_parents)
+{
+ int i = 0, ret;
+ u32 total_parents = clock[clk_id].num_parents;
+ struct clock_topology *clk_nodes;
+ struct clock_parent *parents;
+
+ clk_nodes = clock[clk_id].node;
+ parents = clock[clk_id].parent;
+
+ for (i = 0; i < total_parents; i++) {
+ if (!parents[i].flag) {
+ parent_list[i] = parents[i].name;
+ } else if (parents[i].flag == PARENT_CLK_EXTERNAL) {
+ ret = of_property_match_string(np, "clock-names",
+ parents[i].name);
+ if (ret < 0)
+ strcpy(parents[i].name, "dummy_name");
+ parent_list[i] = parents[i].name;
+ } else {
+ strcat(parents[i].name,
+ clk_type_postfix[clk_nodes[parents[i].flag - 1].
+ type]);
+ parent_list[i] = parents[i].name;
+ }
+ }
+
+ *num_parents = total_parents;
+ return 0;
+}
+
+/**
+ * zynqmp_register_clk_topology() - Register clock topology
+ * @clk_id: Clock index
+ * @clk_name: Clock Name
+ * @num_parents: Total number of parents
+ * @parent_names: List of parents name
+ *
+ * Return: Returns either clock hardware or error+reason
+ */
+static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name,
+ int num_parents,
+ const char **parent_names)
+{
+ int j;
+ u32 num_nodes;
+ char *clk_out = NULL;
+ struct clock_topology *nodes;
+ struct clk_hw *hw = NULL;
+
+ nodes = clock[clk_id].node;
+ num_nodes = clock[clk_id].num_nodes;
+
+ for (j = 0; j < num_nodes; j++) {
+ /*
+ * Clock name received from firmware is output clock name.
+ * Intermediate clock names are postfixed with type of clock.
+ */
+ if (j != (num_nodes - 1)) {
+ clk_out = kasprintf(GFP_KERNEL, "%s%s", clk_name,
+ clk_type_postfix[nodes[j].type]);
+ } else {
+ clk_out = kasprintf(GFP_KERNEL, "%s", clk_name);
+ }
+
+ if (!clk_topology[nodes[j].type])
+ continue;
+
+ hw = (*clk_topology[nodes[j].type])(clk_out, clk_id,
+ parent_names,
+ num_parents,
+ &nodes[j]);
+ if (IS_ERR(hw))
+ pr_warn_once("%s() %s register fail with %ld\n",
+ __func__, clk_name, PTR_ERR(hw));
+
+ parent_names[0] = clk_out;
+ }
+ kfree(clk_out);
+ return hw;
+}
+
+/**
+ * zynqmp_register_clocks() - Register clocks
+ * @np: Device node
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_register_clocks(struct device_node *np)
+{
+ int ret;
+ u32 i, total_parents = 0, type = 0;
+ const char *parent_names[MAX_PARENT];
+
+ for (i = 0; i < clock_max_idx; i++) {
+ char clk_name[MAX_NAME_LEN];
+
+ /* get clock name, continue to next clock if name not found */
+ if (zynqmp_get_clock_name(i, clk_name))
+ continue;
+
+ /* Check if clock is valid and output clock.
+ * Do not register invalid or external clock.
+ */
+ ret = zynqmp_get_clock_type(i, &type);
+ if (ret || type != CLK_TYPE_OUTPUT)
+ continue;
+
+ /* Get parents of clock*/
+ if (zynqmp_get_parent_list(np, i, parent_names,
+ &total_parents)) {
+ WARN_ONCE(1, "No parents found for %s\n",
+ clock[i].clk_name);
+ continue;
+ }
+
+ zynqmp_data->hws[i] =
+ zynqmp_register_clk_topology(i, clk_name,
+ total_parents,
+ parent_names);
+ }
+
+ for (i = 0; i < clock_max_idx; i++) {
+ if (IS_ERR(zynqmp_data->hws[i])) {
+ pr_err("Zynq Ultrascale+ MPSoC clk %s: register failed with %ld\n",
+ clock[i].clk_name, PTR_ERR(zynqmp_data->hws[i]));
+ WARN_ON(1);
+ }
+ }
+ return 0;
+}
+
+/**
+ * zynqmp_get_clock_info() - Get clock information from firmware using PM_API
+ */
+static void zynqmp_get_clock_info(void)
+{
+ int i, ret;
+ u32 attr, type = 0;
+
+ for (i = 0; i < clock_max_idx; i++) {
+ zynqmp_pm_clock_get_name(i, clock[i].clk_name);
+ if (!strcmp(clock[i].clk_name, RESERVED_CLK_NAME))
+ continue;
+
+ ret = zynqmp_pm_clock_get_attributes(i, &attr);
+ if (ret)
+ continue;
+
+ clock[i].valid = attr & CLK_VALID_MASK;
+ clock[i].type = attr >> CLK_TYPE_SHIFT ? CLK_TYPE_EXTERNAL :
+ CLK_TYPE_OUTPUT;
+ }
+
+ /* Get topology of all clock */
+ for (i = 0; i < clock_max_idx; i++) {
+ ret = zynqmp_get_clock_type(i, &type);
+ if (ret || type != CLK_TYPE_OUTPUT)
+ continue;
+
+ ret = zynqmp_clock_get_topology(i, clock[i].node,
+ &clock[i].num_nodes);
+ if (ret)
+ continue;
+
+ ret = zynqmp_clock_get_parents(i, clock[i].parent,
+ &clock[i].num_parents);
+ if (ret)
+ continue;
+ }
+}
+
+/**
+ * zynqmp_clk_setup() - Setup the clock framework and register clocks
+ * @np: Device node
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_clk_setup(struct device_node *np)
+{
+ int ret;
+
+ ret = zynqmp_pm_clock_get_num_clocks(&clock_max_idx);
+ if (ret)
+ return ret;
+
+ zynqmp_data = kzalloc(sizeof(*zynqmp_data) + sizeof(*zynqmp_data) *
+ clock_max_idx, GFP_KERNEL);
+ if (!zynqmp_data)
+ return -ENOMEM;
+
+ clock = kcalloc(clock_max_idx, sizeof(*clock), GFP_KERNEL);
+ if (!clock) {
+ kfree(zynqmp_data);
+ return -ENOMEM;
+ }
+
+ zynqmp_get_clock_info();
+ zynqmp_register_clocks(np);
+
+ zynqmp_data->num = clock_max_idx;
+ of_clk_add_hw_provider(np, of_clk_hw_onecell_get, zynqmp_data);
+
+ return 0;
+}
+
+static int zynqmp_clock_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device *dev = &pdev->dev;
+
+ eemi_ops = zynqmp_pm_get_eemi_ops();
+ if (!eemi_ops)
+ return -ENXIO;
+
+ ret = zynqmp_clk_setup(dev->of_node);
+
+ return ret;
+}
+
+static const struct of_device_id zynqmp_clock_of_match[] = {
+ {.compatible = "xlnx,zynqmp-clk"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, zynqmp_clock_of_match);
+
+static struct platform_driver zynqmp_clock_driver = {
+ .driver = {
+ .name = "zynqmp_clock",
+ .of_match_table = zynqmp_clock_of_match,
+ },
+ .probe = zynqmp_clock_probe,
+};
+module_platform_driver(zynqmp_clock_driver);
diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
new file mode 100644
index 0000000000000000000000000000000000000000..a371c66e72ef682d04655e2eaa0e288475380727
--- /dev/null
+++ b/drivers/clk/zynqmp/divider.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC Divider support
+ *
+ * Copyright (C) 2016-2018 Xilinx
+ *
+ * Adjustable divider clock implementation
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/*
+ * DOC: basic adjustable divider clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable. clk->rate = ceiling(parent->rate / divisor)
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+#define to_zynqmp_clk_divider(_hw) \
+ container_of(_hw, struct zynqmp_clk_divider, hw)
+
+#define CLK_FRAC BIT(13) /* has a fractional parent */
+
+/**
+ * struct zynqmp_clk_divider - adjustable divider clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @flags: Hardware specific flags
+ * @clk_id: Id of clock
+ * @div_type: divisor type (TYPE_DIV1 or TYPE_DIV2)
+ */
+struct zynqmp_clk_divider {
+ struct clk_hw hw;
+ u8 flags;
+ u32 clk_id;
+ u32 div_type;
+};
+
+static inline int zynqmp_divider_get_val(unsigned long parent_rate,
+ unsigned long rate)
+{
+ return DIV_ROUND_CLOSEST(parent_rate, rate);
+}
+
+/**
+ * zynqmp_clk_divider_recalc_rate() - Recalc rate of divider clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @parent_rate: rate of parent clock
+ *
+ * Return: 0 on success else error+reason
+ */
+static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = divider->clk_id;
+ u32 div_type = divider->div_type;
+ u32 div, value;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_getdivider(clk_id, &div);
+
+ if (ret)
+ pr_warn_once("%s() get divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ if (div_type == TYPE_DIV1)
+ value = div & 0xFFFF;
+ else
+ value = div >> 16;
+
+ return DIV_ROUND_UP_ULL(parent_rate, value);
+}
+
+/**
+ * zynqmp_clk_divider_round_rate() - Round rate of divider clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @rate: rate of clock to be set
+ * @prate: rate of parent clock
+ *
+ * Return: 0 on success else error+reason
+ */
+static long zynqmp_clk_divider_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *prate)
+{
+ struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = divider->clk_id;
+ u32 div_type = divider->div_type;
+ u32 bestdiv;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ /* if read only, just return current value */
+ if (divider->flags & CLK_DIVIDER_READ_ONLY) {
+ ret = eemi_ops->clock_getdivider(clk_id, &bestdiv);
+
+ if (ret)
+ pr_warn_once("%s() get divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+ if (div_type == TYPE_DIV1)
+ bestdiv = bestdiv & 0xFFFF;
+ else
+ bestdiv = bestdiv >> 16;
+
+ return DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
+ }
+
+ bestdiv = zynqmp_divider_get_val(*prate, rate);
+
+ if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) &&
+ (divider->flags & CLK_FRAC))
+ bestdiv = rate % *prate ? 1 : bestdiv;
+ *prate = rate * bestdiv;
+
+ return rate;
+}
+
+/**
+ * zynqmp_clk_divider_set_rate() - Set rate of divider clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @rate: rate of clock to be set
+ * @parent_rate: rate of parent clock
+ *
+ * Return: 0 on success else error+reason
+ */
+static int zynqmp_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = divider->clk_id;
+ u32 div_type = divider->div_type;
+ u32 value, div;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ value = zynqmp_divider_get_val(parent_rate, rate);
+ if (div_type == TYPE_DIV1) {
+ div = value & 0xFFFF;
+ div |= 0xffff << 16;
+ } else {
+ div = 0xffff;
+ div |= value << 16;
+ }
+
+ ret = eemi_ops->clock_setdivider(clk_id, div);
+
+ if (ret)
+ pr_warn_once("%s() set divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return ret;
+}
+
+static const struct clk_ops zynqmp_clk_divider_ops = {
+ .recalc_rate = zynqmp_clk_divider_recalc_rate,
+ .round_rate = zynqmp_clk_divider_round_rate,
+ .set_rate = zynqmp_clk_divider_set_rate,
+};
+
+/**
+ * zynqmp_clk_register_divider() - Register a divider clock
+ * @name: Name of this clock
+ * @clk_id: Id of clock
+ * @parents: Name of this clock's parents
+ * @num_parents: Number of parents
+ * @nodes: Clock topology node
+ *
+ * Return: clock hardware to registered clock divider
+ */
+struct clk_hw *zynqmp_clk_register_divider(const char *name,
+ u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes)
+{
+ struct zynqmp_clk_divider *div;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ /* allocate the divider */
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &zynqmp_clk_divider_ops;
+ init.flags = nodes->flag;
+ init.parent_names = parents;
+ init.num_parents = 1;
+
+ /* struct clk_divider assignments */
+ div->flags = nodes->type_flag;
+ div->hw.init = &init;
+ div->clk_id = clk_id;
+ div->div_type = nodes->type;
+
+ hw = &div->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ kfree(div);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
+EXPORT_SYMBOL_GPL(zynqmp_clk_register_divider);
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
new file mode 100644
index 0000000000000000000000000000000000000000..a541397a172c86705d9cc0886e4206f91019872f
--- /dev/null
+++ b/drivers/clk/zynqmp/pll.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC PLL driver
+ *
+ * Copyright (C) 2016-2018 Xilinx
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/**
+ * struct zynqmp_pll - PLL clock
+ * @hw: Handle between common and hardware-specific interfaces
+ * @clk_id: PLL clock ID
+ */
+struct zynqmp_pll {
+ struct clk_hw hw;
+ u32 clk_id;
+};
+
+#define to_zynqmp_pll(_hw) container_of(_hw, struct zynqmp_pll, hw)
+
+#define PLL_FBDIV_MIN 25
+#define PLL_FBDIV_MAX 125
+
+#define PS_PLL_VCO_MIN 1500000000
+#define PS_PLL_VCO_MAX 3000000000UL
+
+enum pll_mode {
+ PLL_MODE_INT,
+ PLL_MODE_FRAC,
+};
+
+#define FRAC_OFFSET 0x8
+#define PLLFCFG_FRAC_EN BIT(31)
+#define FRAC_DIV BIT(16) /* 2^16 */
+
+/**
+ * zynqmp_pll_get_mode() - Get mode of PLL
+ * @hw: Handle between common and hardware-specific interfaces
+ *
+ * Return: Mode of PLL
+ */
+static inline enum pll_mode zynqmp_pll_get_mode(struct clk_hw *hw)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ u32 clk_id = clk->clk_id;
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_MODE, clk_id, 0,
+ ret_payload);
+ if (ret)
+ pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return ret_payload[1];
+}
+
+/**
+ * zynqmp_pll_set_mode() - Set the PLL mode
+ * @hw: Handle between common and hardware-specific interfaces
+ * @on: Flag to determine the mode
+ */
+static inline void zynqmp_pll_set_mode(struct clk_hw *hw, bool on)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ u32 clk_id = clk->clk_id;
+ const char *clk_name = clk_hw_get_name(hw);
+ int ret;
+ u32 mode;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (on)
+ mode = PLL_MODE_FRAC;
+ else
+ mode = PLL_MODE_INT;
+
+ ret = eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_MODE, clk_id, mode, NULL);
+ if (ret)
+ pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+}
+
+/**
+ * zynqmp_pll_round_rate() - Round a clock frequency
+ * @hw: Handle between common and hardware-specific interfaces
+ * @rate: Desired clock frequency
+ * @prate: Clock frequency of parent clock
+ *
+ * Return: Frequency closest to @rate the hardware can generate
+ */
+static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ u32 fbdiv;
+ long rate_div, f;
+
+ /* Enable the fractional mode if needed */
+ rate_div = (rate * FRAC_DIV) / *prate;
+ f = rate_div % FRAC_DIV;
+ zynqmp_pll_set_mode(hw, !!f);
+
+ if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+ if (rate > PS_PLL_VCO_MAX) {
+ fbdiv = rate / PS_PLL_VCO_MAX;
+ rate = rate / (fbdiv + 1);
+ }
+ if (rate < PS_PLL_VCO_MIN) {
+ fbdiv = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate);
+ rate = rate * fbdiv;
+ }
+ return rate;
+ }
+
+ fbdiv = DIV_ROUND_CLOSEST(rate, *prate);
+ fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX);
+ return *prate * fbdiv;
+}
+
+/**
+ * zynqmp_pll_recalc_rate() - Recalculate clock frequency
+ * @hw: Handle between common and hardware-specific interfaces
+ * @parent_rate: Clock frequency of parent clock
+ *
+ * Return: Current clock frequency
+ */
+static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ u32 clk_id = clk->clk_id;
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 fbdiv, data;
+ unsigned long rate, frac;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_getdivider(clk_id, &fbdiv);
+ if (ret)
+ pr_warn_once("%s() get divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ rate = parent_rate * fbdiv;
+ if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+ eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_DATA, clk_id, 0,
+ ret_payload);
+ data = ret_payload[1];
+ frac = (parent_rate * data) / FRAC_DIV;
+ rate = rate + frac;
+ }
+
+ return rate;
+}
+
+/**
+ * zynqmp_pll_set_rate() - Set rate of PLL
+ * @hw: Handle between common and hardware-specific interfaces
+ * @rate: Frequency of clock to be set
+ * @parent_rate: Clock frequency of parent clock
+ *
+ * Set PLL divider to set desired rate.
+ *
+ * Returns: rate which is set on success else error code
+ */
+static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ u32 clk_id = clk->clk_id;
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 fbdiv;
+ long rate_div, frac, m, f;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+ rate_div = (rate * FRAC_DIV) / parent_rate;
+ m = rate_div / FRAC_DIV;
+ f = rate_div % FRAC_DIV;
+ m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX));
+ rate = parent_rate * m;
+ frac = (parent_rate * f) / FRAC_DIV;
+
+ ret = eemi_ops->clock_setdivider(clk_id, m);
+ if (ret)
+ pr_warn_once("%s() set divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_DATA, clk_id, f, NULL);
+
+ return rate + frac;
+ }
+
+ fbdiv = DIV_ROUND_CLOSEST(rate, parent_rate);
+ fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX);
+ ret = eemi_ops->clock_setdivider(clk_id, fbdiv);
+ if (ret)
+ pr_warn_once("%s() set divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return parent_rate * fbdiv;
+}
+
+/**
+ * zynqmp_pll_is_enabled() - Check if a clock is enabled
+ * @hw: Handle between common and hardware-specific interfaces
+ *
+ * Return: 1 if the clock is enabled, 0 otherwise
+ */
+static int zynqmp_pll_is_enabled(struct clk_hw *hw)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = clk->clk_id;
+ unsigned int state;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_getstate(clk_id, &state);
+ if (ret) {
+ pr_warn_once("%s() clock get state failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+ return -EIO;
+ }
+
+ return state ? 1 : 0;
+}
+
+/**
+ * zynqmp_pll_enable() - Enable clock
+ * @hw: Handle between common and hardware-specific interfaces
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_pll_enable(struct clk_hw *hw)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = clk->clk_id;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (zynqmp_pll_is_enabled(hw))
+ return 0;
+
+ ret = eemi_ops->clock_enable(clk_id);
+ if (ret)
+ pr_warn_once("%s() clock enable failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return ret;
+}
+
+/**
+ * zynqmp_pll_disable() - Disable clock
+ * @hw: Handle between common and hardware-specific interfaces
+ */
+static void zynqmp_pll_disable(struct clk_hw *hw)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = clk->clk_id;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (!zynqmp_pll_is_enabled(hw))
+ return;
+
+ ret = eemi_ops->clock_disable(clk_id);
+ if (ret)
+ pr_warn_once("%s() clock disable failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+}
+
+static const struct clk_ops zynqmp_pll_ops = {
+ .enable = zynqmp_pll_enable,
+ .disable = zynqmp_pll_disable,
+ .is_enabled = zynqmp_pll_is_enabled,
+ .round_rate = zynqmp_pll_round_rate,
+ .recalc_rate = zynqmp_pll_recalc_rate,
+ .set_rate = zynqmp_pll_set_rate,
+};
+
+/**
+ * zynqmp_clk_register_pll() - Register PLL with the clock framework
+ * @name: PLL name
+ * @clk_id: Clock ID
+ * @parents: Name of this clock's parents
+ * @num_parents: Number of parents
+ * @nodes: Clock topology node
+ *
+ * Return: clock hardware to the registered clock
+ */
+struct clk_hw *zynqmp_clk_register_pll(const char *name, u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ const struct clock_topology *nodes)
+{
+ struct zynqmp_pll *pll;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ init.name = name;
+ init.ops = &zynqmp_pll_ops;
+ init.flags = nodes->flag;
+ init.parent_names = parents;
+ init.num_parents = 1;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->hw.init = &init;
+ pll->clk_id = clk_id;
+
+ hw = &pll->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ kfree(pll);
+ return ERR_PTR(ret);
+ }
+
+ clk_hw_set_rate_range(hw, PS_PLL_VCO_MIN, PS_PLL_VCO_MAX);
+ if (ret < 0)
+ pr_err("%s:ERROR clk_set_rate_range failed %d\n", name, ret);
+
+ return hw;
+}
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 57304b2e989f2ca6ba45fe808cb933240273e7a0..df9467eef32a0e4b67090e56e1a5c0260a0f4037 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -460,4 +460,18 @@ config EDAC_TI
Support for error detection and correction on the
TI SoCs.
+config EDAC_QCOM
+ tristate "QCOM EDAC Controller"
+ depends on ARCH_QCOM && QCOM_LLCC
+ help
+ Support for error detection and correction on the
+ Qualcomm Technologies, Inc. SoCs.
+
+ This driver reports Single Bit Errors (SBEs) and Double Bit Errors (DBEs).
+ As of now, it supports error reporting for Last Level Cache Controller (LLCC)
+ of Tag RAM and Data RAM.
+
+ For debugging issues having to do with stability and overall system
+ health, you should probably say 'Y' here.
+
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 02b43a7d8c3ee3072863c8560d08eb871962feb7..716096d08ea00c6ee4a304c9adb88ca60752691d 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -77,3 +77,4 @@ obj-$(CONFIG_EDAC_ALTERA) += altera_edac.o
obj-$(CONFIG_EDAC_SYNOPSYS) += synopsys_edac.o
obj-$(CONFIG_EDAC_XGENE) += xgene_edac.o
obj-$(CONFIG_EDAC_TI) += ti_edac.o
+obj-$(CONFIG_EDAC_QCOM) += qcom_edac.o
diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c
new file mode 100644
index 0000000000000000000000000000000000000000..82bd775124f2c899d6570e147159ddd71f7097e1
--- /dev/null
+++ b/drivers/edac/qcom_edac.c
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/soc/qcom/llcc-qcom.h>
+
+#include "edac_mc.h"
+#include "edac_device.h"
+
+#define EDAC_LLCC "qcom_llcc"
+
+#define LLCC_ERP_PANIC_ON_UE 1
+
+#define TRP_SYN_REG_CNT 6
+#define DRP_SYN_REG_CNT 8
+
+#define LLCC_COMMON_STATUS0 0x0003000c
+#define LLCC_LB_CNT_MASK GENMASK(31, 28)
+#define LLCC_LB_CNT_SHIFT 28
+
+/* Single & double bit syndrome register offsets */
+#define TRP_ECC_SB_ERR_SYN0 0x0002304c
+#define TRP_ECC_DB_ERR_SYN0 0x00020370
+#define DRP_ECC_SB_ERR_SYN0 0x0004204c
+#define DRP_ECC_DB_ERR_SYN0 0x00042070
+
+/* Error register offsets */
+#define TRP_ECC_ERROR_STATUS1 0x00020348
+#define TRP_ECC_ERROR_STATUS0 0x00020344
+#define DRP_ECC_ERROR_STATUS1 0x00042048
+#define DRP_ECC_ERROR_STATUS0 0x00042044
+
+/* TRP, DRP interrupt register offsets */
+#define DRP_INTERRUPT_STATUS 0x00041000
+#define TRP_INTERRUPT_0_STATUS 0x00020480
+#define DRP_INTERRUPT_CLEAR 0x00041008
+#define DRP_ECC_ERROR_CNTR_CLEAR 0x00040004
+#define TRP_INTERRUPT_0_CLEAR 0x00020484
+#define TRP_ECC_ERROR_CNTR_CLEAR 0x00020440
+
+/* Mask and shift macros */
+#define ECC_DB_ERR_COUNT_MASK GENMASK(4, 0)
+#define ECC_DB_ERR_WAYS_MASK GENMASK(31, 16)
+#define ECC_DB_ERR_WAYS_SHIFT BIT(4)
+
+#define ECC_SB_ERR_COUNT_MASK GENMASK(23, 16)
+#define ECC_SB_ERR_COUNT_SHIFT BIT(4)
+#define ECC_SB_ERR_WAYS_MASK GENMASK(15, 0)
+
+#define SB_ECC_ERROR BIT(0)
+#define DB_ECC_ERROR BIT(1)
+
+#define DRP_TRP_INT_CLEAR GENMASK(1, 0)
+#define DRP_TRP_CNT_CLEAR GENMASK(1, 0)
+
+/* Config registers offsets*/
+#define DRP_ECC_ERROR_CFG 0x00040000
+
+/* Tag RAM, Data RAM interrupt register offsets */
+#define CMN_INTERRUPT_0_ENABLE 0x0003001c
+#define CMN_INTERRUPT_2_ENABLE 0x0003003c
+#define TRP_INTERRUPT_0_ENABLE 0x00020488
+#define DRP_INTERRUPT_ENABLE 0x0004100c
+
+#define SB_ERROR_THRESHOLD 0x1
+#define SB_ERROR_THRESHOLD_SHIFT 24
+#define SB_DB_TRP_INTERRUPT_ENABLE 0x3
+#define TRP0_INTERRUPT_ENABLE 0x1
+#define DRP0_INTERRUPT_ENABLE BIT(6)
+#define SB_DB_DRP_INTERRUPT_ENABLE 0x3
+
+enum {
+ LLCC_DRAM_CE = 0,
+ LLCC_DRAM_UE,
+ LLCC_TRAM_CE,
+ LLCC_TRAM_UE,
+};
+
+static const struct llcc_edac_reg_data edac_reg_data[] = {
+ [LLCC_DRAM_CE] = {
+ .name = "DRAM Single-bit",
+ .synd_reg = DRP_ECC_SB_ERR_SYN0,
+ .count_status_reg = DRP_ECC_ERROR_STATUS1,
+ .ways_status_reg = DRP_ECC_ERROR_STATUS0,
+ .reg_cnt = DRP_SYN_REG_CNT,
+ .count_mask = ECC_SB_ERR_COUNT_MASK,
+ .ways_mask = ECC_SB_ERR_WAYS_MASK,
+ .count_shift = ECC_SB_ERR_COUNT_SHIFT,
+ },
+ [LLCC_DRAM_UE] = {
+ .name = "DRAM Double-bit",
+ .synd_reg = DRP_ECC_DB_ERR_SYN0,
+ .count_status_reg = DRP_ECC_ERROR_STATUS1,
+ .ways_status_reg = DRP_ECC_ERROR_STATUS0,
+ .reg_cnt = DRP_SYN_REG_CNT,
+ .count_mask = ECC_DB_ERR_COUNT_MASK,
+ .ways_mask = ECC_DB_ERR_WAYS_MASK,
+ .ways_shift = ECC_DB_ERR_WAYS_SHIFT,
+ },
+ [LLCC_TRAM_CE] = {
+ .name = "TRAM Single-bit",
+ .synd_reg = TRP_ECC_SB_ERR_SYN0,
+ .count_status_reg = TRP_ECC_ERROR_STATUS1,
+ .ways_status_reg = TRP_ECC_ERROR_STATUS0,
+ .reg_cnt = TRP_SYN_REG_CNT,
+ .count_mask = ECC_SB_ERR_COUNT_MASK,
+ .ways_mask = ECC_SB_ERR_WAYS_MASK,
+ .count_shift = ECC_SB_ERR_COUNT_SHIFT,
+ },
+ [LLCC_TRAM_UE] = {
+ .name = "TRAM Double-bit",
+ .synd_reg = TRP_ECC_DB_ERR_SYN0,
+ .count_status_reg = TRP_ECC_ERROR_STATUS1,
+ .ways_status_reg = TRP_ECC_ERROR_STATUS0,
+ .reg_cnt = TRP_SYN_REG_CNT,
+ .count_mask = ECC_DB_ERR_COUNT_MASK,
+ .ways_mask = ECC_DB_ERR_WAYS_MASK,
+ .ways_shift = ECC_DB_ERR_WAYS_SHIFT,
+ },
+};
+
+static int qcom_llcc_core_setup(struct regmap *llcc_bcast_regmap)
+{
+ u32 sb_err_threshold;
+ int ret;
+
+ /*
+ * Configure interrupt enable registers such that Tag, Data RAM related
+ * interrupts are propagated to interrupt controller for servicing
+ */
+ ret = regmap_update_bits(llcc_bcast_regmap, CMN_INTERRUPT_2_ENABLE,
+ TRP0_INTERRUPT_ENABLE,
+ TRP0_INTERRUPT_ENABLE);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(llcc_bcast_regmap, TRP_INTERRUPT_0_ENABLE,
+ SB_DB_TRP_INTERRUPT_ENABLE,
+ SB_DB_TRP_INTERRUPT_ENABLE);
+ if (ret)
+ return ret;
+
+ sb_err_threshold = (SB_ERROR_THRESHOLD << SB_ERROR_THRESHOLD_SHIFT);
+ ret = regmap_write(llcc_bcast_regmap, DRP_ECC_ERROR_CFG,
+ sb_err_threshold);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(llcc_bcast_regmap, CMN_INTERRUPT_2_ENABLE,
+ DRP0_INTERRUPT_ENABLE,
+ DRP0_INTERRUPT_ENABLE);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(llcc_bcast_regmap, DRP_INTERRUPT_ENABLE,
+ SB_DB_DRP_INTERRUPT_ENABLE);
+ return ret;
+}
+
+/* Clear the error interrupt and counter registers */
+static int
+qcom_llcc_clear_error_status(int err_type, struct llcc_drv_data *drv)
+{
+ int ret = 0;
+
+ switch (err_type) {
+ case LLCC_DRAM_CE:
+ case LLCC_DRAM_UE:
+ ret = regmap_write(drv->bcast_regmap, DRP_INTERRUPT_CLEAR,
+ DRP_TRP_INT_CLEAR);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(drv->bcast_regmap, DRP_ECC_ERROR_CNTR_CLEAR,
+ DRP_TRP_CNT_CLEAR);
+ if (ret)
+ return ret;
+ break;
+ case LLCC_TRAM_CE:
+ case LLCC_TRAM_UE:
+ ret = regmap_write(drv->bcast_regmap, TRP_INTERRUPT_0_CLEAR,
+ DRP_TRP_INT_CLEAR);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(drv->bcast_regmap, TRP_ECC_ERROR_CNTR_CLEAR,
+ DRP_TRP_CNT_CLEAR);
+ if (ret)
+ return ret;
+ break;
+ default:
+ ret = -EINVAL;
+ edac_printk(KERN_CRIT, EDAC_LLCC, "Unexpected error type: %d\n",
+ err_type);
+ }
+ return ret;
+}
+
+/* Dump Syndrome registers data for Tag RAM, Data RAM bit errors*/
+static int
+dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
+{
+ struct llcc_edac_reg_data reg_data = edac_reg_data[err_type];
+ int err_cnt, err_ways, ret, i;
+ u32 synd_reg, synd_val;
+
+ for (i = 0; i < reg_data.reg_cnt; i++) {
+ synd_reg = reg_data.synd_reg + (i * 4);
+ ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
+ &synd_val);
+ if (ret)
+ goto clear;
+
+ edac_printk(KERN_CRIT, EDAC_LLCC, "%s: ECC_SYN%d: 0x%8x\n",
+ reg_data.name, i, synd_val);
+ }
+
+ ret = regmap_read(drv->regmap,
+ drv->offsets[bank] + reg_data.count_status_reg,
+ &err_cnt);
+ if (ret)
+ goto clear;
+
+ err_cnt &= reg_data.count_mask;
+ err_cnt >>= reg_data.count_shift;
+ edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n",
+ reg_data.name, err_cnt);
+
+ ret = regmap_read(drv->regmap,
+ drv->offsets[bank] + reg_data.ways_status_reg,
+ &err_ways);
+ if (ret)
+ goto clear;
+
+ err_ways &= reg_data.ways_mask;
+ err_ways >>= reg_data.ways_shift;
+
+ edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error ways: 0x%4x\n",
+ reg_data.name, err_ways);
+
+clear:
+ return qcom_llcc_clear_error_status(err_type, drv);
+}
+
+static int
+dump_syn_reg(struct edac_device_ctl_info *edev_ctl, int err_type, u32 bank)
+{
+ struct llcc_drv_data *drv = edev_ctl->pvt_info;
+ int ret;
+
+ ret = dump_syn_reg_values(drv, bank, err_type);
+ if (ret)
+ return ret;
+
+ switch (err_type) {
+ case LLCC_DRAM_CE:
+ edac_device_handle_ce(edev_ctl, 0, bank,
+ "LLCC Data RAM correctable Error");
+ break;
+ case LLCC_DRAM_UE:
+ edac_device_handle_ue(edev_ctl, 0, bank,
+ "LLCC Data RAM uncorrectable Error");
+ break;
+ case LLCC_TRAM_CE:
+ edac_device_handle_ce(edev_ctl, 0, bank,
+ "LLCC Tag RAM correctable Error");
+ break;
+ case LLCC_TRAM_UE:
+ edac_device_handle_ue(edev_ctl, 0, bank,
+ "LLCC Tag RAM uncorrectable Error");
+ break;
+ default:
+ ret = -EINVAL;
+ edac_printk(KERN_CRIT, EDAC_LLCC, "Unexpected error type: %d\n",
+ err_type);
+ }
+
+ return ret;
+}
+
+static irqreturn_t
+llcc_ecc_irq_handler(int irq, void *edev_ctl)
+{
+ struct edac_device_ctl_info *edac_dev_ctl = edev_ctl;
+ struct llcc_drv_data *drv = edac_dev_ctl->pvt_info;
+ irqreturn_t irq_rc = IRQ_NONE;
+ u32 drp_error, trp_error, i;
+ bool irq_handled;
+ int ret;
+
+ /* Iterate over the banks and look for Tag RAM or Data RAM errors */
+ for (i = 0; i < drv->num_banks; i++) {
+ ret = regmap_read(drv->regmap,
+ drv->offsets[i] + DRP_INTERRUPT_STATUS,
+ &drp_error);
+
+ if (!ret && (drp_error & SB_ECC_ERROR)) {
+ edac_printk(KERN_CRIT, EDAC_LLCC,
+ "Single Bit Error detected in Data RAM\n");
+ ret = dump_syn_reg(edev_ctl, LLCC_DRAM_CE, i);
+ } else if (!ret && (drp_error & DB_ECC_ERROR)) {
+ edac_printk(KERN_CRIT, EDAC_LLCC,
+ "Double Bit Error detected in Data RAM\n");
+ ret = dump_syn_reg(edev_ctl, LLCC_DRAM_UE, i);
+ }
+ if (!ret)
+ irq_handled = true;
+
+ ret = regmap_read(drv->regmap,
+ drv->offsets[i] + TRP_INTERRUPT_0_STATUS,
+ &trp_error);
+
+ if (!ret && (trp_error & SB_ECC_ERROR)) {
+ edac_printk(KERN_CRIT, EDAC_LLCC,
+ "Single Bit Error detected in Tag RAM\n");
+ ret = dump_syn_reg(edev_ctl, LLCC_TRAM_CE, i);
+ } else if (!ret && (trp_error & DB_ECC_ERROR)) {
+ edac_printk(KERN_CRIT, EDAC_LLCC,
+ "Double Bit Error detected in Tag RAM\n");
+ ret = dump_syn_reg(edev_ctl, LLCC_TRAM_UE, i);
+ }
+ if (!ret)
+ irq_handled = true;
+ }
+
+ if (irq_handled)
+ irq_rc = IRQ_HANDLED;
+
+ return irq_rc;
+}
+
+static int qcom_llcc_edac_probe(struct platform_device *pdev)
+{
+ struct llcc_drv_data *llcc_driv_data = pdev->dev.platform_data;
+ struct edac_device_ctl_info *edev_ctl;
+ struct device *dev = &pdev->dev;
+ int ecc_irq;
+ int rc;
+
+ rc = qcom_llcc_core_setup(llcc_driv_data->bcast_regmap);
+ if (rc)
+ return rc;
+
+ /* Allocate edac control info */
+ edev_ctl = edac_device_alloc_ctl_info(0, "qcom-llcc", 1, "bank",
+ llcc_driv_data->num_banks, 1,
+ NULL, 0,
+ edac_device_alloc_index());
+
+ if (!edev_ctl)
+ return -ENOMEM;
+
+ edev_ctl->dev = dev;
+ edev_ctl->mod_name = dev_name(dev);
+ edev_ctl->dev_name = dev_name(dev);
+ edev_ctl->ctl_name = "llcc";
+ edev_ctl->panic_on_ue = LLCC_ERP_PANIC_ON_UE;
+ edev_ctl->pvt_info = llcc_driv_data;
+
+ rc = edac_device_add_device(edev_ctl);
+ if (rc)
+ goto out_mem;
+
+ platform_set_drvdata(pdev, edev_ctl);
+
+ /* Request for ecc irq */
+ ecc_irq = llcc_driv_data->ecc_irq;
+ if (ecc_irq < 0) {
+ rc = -ENODEV;
+ goto out_dev;
+ }
+ rc = devm_request_irq(dev, ecc_irq, llcc_ecc_irq_handler,
+ IRQF_TRIGGER_HIGH, "llcc_ecc", edev_ctl);
+ if (rc)
+ goto out_dev;
+
+ return rc;
+
+out_dev:
+ edac_device_del_device(edev_ctl->dev);
+out_mem:
+ edac_device_free_ctl_info(edev_ctl);
+
+ return rc;
+}
+
+static int qcom_llcc_edac_remove(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *edev_ctl = dev_get_drvdata(&pdev->dev);
+
+ edac_device_del_device(edev_ctl->dev);
+ edac_device_free_ctl_info(edev_ctl);
+
+ return 0;
+}
+
+static struct platform_driver qcom_llcc_edac_driver = {
+ .probe = qcom_llcc_edac_probe,
+ .remove = qcom_llcc_edac_remove,
+ .driver = {
+ .name = "qcom_llcc_edac",
+ },
+};
+module_platform_driver(qcom_llcc_edac_driver);
+
+MODULE_DESCRIPTION("QCOM EDAC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 6e83880046d787d978cddaa1fcf2c5b930843186..7670e8dda82951312feee7eca53f7499129c911a 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -289,7 +289,9 @@ config HAVE_ARM_SMCCC
source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"
+source "drivers/firmware/imx/Kconfig"
source "drivers/firmware/meson/Kconfig"
source "drivers/firmware/tegra/Kconfig"
+source "drivers/firmware/xilinx/Kconfig"
endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index e18a041cfc53b738f5b4e22433e6055de41d8cc7..13660a9514379e7534af0f56c6e084f68b2ef02c 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -31,4 +31,6 @@ obj-y += meson/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
obj-$(CONFIG_EFI) += efi/
obj-$(CONFIG_UEFI_CPER) += efi/
+obj-y += imx/
obj-y += tegra/
+obj-y += xilinx/
diff --git a/drivers/firmware/arm_scmi/base.c b/drivers/firmware/arm_scmi/base.c
index 9dff33ea6416f66879ea4de32e8dba6a22e37c01..204390297f4bd4e249a6f3987e992ff1eb2b7d56 100644
--- a/drivers/firmware/arm_scmi/base.c
+++ b/drivers/firmware/arm_scmi/base.c
@@ -208,7 +208,7 @@ static int scmi_base_discover_agent_get(const struct scmi_handle *handle,
ret = scmi_do_xfer(handle, t);
if (!ret)
- memcpy(name, t->rx.buf, SCMI_MAX_STR_SIZE);
+ strlcpy(name, t->rx.buf, SCMI_MAX_STR_SIZE);
scmi_xfer_put(handle, t);
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index e4119eb34986cb5219b648d1b900a23c8686329b..30fc04e284312e9f19c165994dad1170966304b8 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -111,7 +111,7 @@ static int scmi_clock_attributes_get(const struct scmi_handle *handle,
ret = scmi_do_xfer(handle, t);
if (!ret)
- memcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
+ strlcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
else
clk->name[0] = '\0';
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 64342944d9175c54918100c36f0b43a20e6acae3..3c8ae7cc35de3cf1b10cb452adbd8f0282b39a27 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -174,7 +174,7 @@ scmi_perf_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
dom_info->mult_factor =
(dom_info->sustained_freq_khz * 1000) /
dom_info->sustained_perf_level;
- memcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+ strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
}
scmi_xfer_put(handle, t);
@@ -427,6 +427,33 @@ static int scmi_dvfs_freq_get(const struct scmi_handle *handle, u32 domain,
return ret;
}
+static int scmi_dvfs_est_power_get(const struct scmi_handle *handle, u32 domain,
+ unsigned long *freq, unsigned long *power)
+{
+ struct scmi_perf_info *pi = handle->perf_priv;
+ struct perf_dom_info *dom;
+ unsigned long opp_freq;
+ int idx, ret = -EINVAL;
+ struct scmi_opp *opp;
+
+ dom = pi->dom_info + domain;
+ if (!dom)
+ return -EIO;
+
+ for (opp = dom->opp, idx = 0; idx < dom->opp_count; idx++, opp++) {
+ opp_freq = opp->perf * dom->mult_factor;
+ if (opp_freq < *freq)
+ continue;
+
+ *freq = opp_freq;
+ *power = opp->power;
+ ret = 0;
+ break;
+ }
+
+ return ret;
+}
+
static struct scmi_perf_ops perf_ops = {
.limits_set = scmi_perf_limits_set,
.limits_get = scmi_perf_limits_get,
@@ -437,6 +464,7 @@ static struct scmi_perf_ops perf_ops = {
.device_opps_add = scmi_dvfs_device_opps_add,
.freq_set = scmi_dvfs_freq_set,
.freq_get = scmi_dvfs_freq_get,
+ .est_power_get = scmi_dvfs_est_power_get,
};
static int scmi_perf_protocol_init(struct scmi_handle *handle)
diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c
index cfa033b05aed5e568b2510e2a7dace5162d13327..62f3401a1f01e90d9ddceabbe462416471d67614 100644
--- a/drivers/firmware/arm_scmi/power.c
+++ b/drivers/firmware/arm_scmi/power.c
@@ -106,7 +106,7 @@ scmi_power_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
dom_info->state_set_notify = SUPPORTS_STATE_SET_NOTIFY(flags);
dom_info->state_set_async = SUPPORTS_STATE_SET_ASYNC(flags);
dom_info->state_set_sync = SUPPORTS_STATE_SET_SYNC(flags);
- memcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+ strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
}
scmi_xfer_put(handle, t);
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 27f2092b9882aef307763e214eb74c69f4db2af5..b53d5cc9c9f6c57ebae04f6a43e42fb814fc27d9 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -140,7 +140,7 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
s = &si->sensors[desc_index + cnt];
s->id = le32_to_cpu(buf->desc[cnt].id);
s->type = SENSOR_TYPE(attrh);
- memcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
+ strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
}
desc_index += num_returned;
diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..b170c2851e4835d77b8d2fe5671cc41877b5c838
--- /dev/null
+++ b/drivers/firmware/imx/Kconfig
@@ -0,0 +1,11 @@
+config IMX_SCU
+ bool "IMX SCU Protocol driver"
+ depends on IMX_MBOX
+ help
+ The System Controller Firmware (SCFW) is a low-level system function
+ which runs on a dedicated Cortex-M core to provide power, clock, and
+ resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+ (QM, QP), and i.MX8QX (QXP, DX).
+
+ This driver manages the IPC interface between host CPU and the
+ SCU firmware running on M4.
diff --git a/drivers/firmware/imx/Makefile b/drivers/firmware/imx/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..0ac04dfda8d472914b8ed0514b5a45dc4656093b
--- /dev/null
+++ b/drivers/firmware/imx/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o
diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
new file mode 100644
index 0000000000000000000000000000000000000000..2bb1a19c413f9ef7df21328776119c9cf8c0d224
--- /dev/null
+++ b/drivers/firmware/imx/imx-scu.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ * Author: Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ * Implementation of the SCU IPC functions using MUs (client side).
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/firmware/imx/types.h>
+#include <linux/firmware/imx/ipc.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define SCU_MU_CHAN_NUM 8
+#define MAX_RX_TIMEOUT (msecs_to_jiffies(30))
+
+struct imx_sc_chan {
+ struct imx_sc_ipc *sc_ipc;
+
+ struct mbox_client cl;
+ struct mbox_chan *ch;
+ int idx;
+};
+
+struct imx_sc_ipc {
+ /* SCU uses 4 Tx and 4 Rx channels */
+ struct imx_sc_chan chans[SCU_MU_CHAN_NUM];
+ struct device *dev;
+ struct mutex lock;
+ struct completion done;
+
+ /* temporarily store the SCU msg */
+ u32 *msg;
+ u8 rx_size;
+ u8 count;
+};
+
+/*
+ * This type is used to indicate error response for most functions.
+ */
+enum imx_sc_error_codes {
+ IMX_SC_ERR_NONE = 0, /* Success */
+ IMX_SC_ERR_VERSION = 1, /* Incompatible API version */
+ IMX_SC_ERR_CONFIG = 2, /* Configuration error */
+ IMX_SC_ERR_PARM = 3, /* Bad parameter */
+ IMX_SC_ERR_NOACCESS = 4, /* Permission error (no access) */
+ IMX_SC_ERR_LOCKED = 5, /* Permission error (locked) */
+ IMX_SC_ERR_UNAVAILABLE = 6, /* Unavailable (out of resources) */
+ IMX_SC_ERR_NOTFOUND = 7, /* Not found */
+ IMX_SC_ERR_NOPOWER = 8, /* No power */
+ IMX_SC_ERR_IPC = 9, /* Generic IPC error */
+ IMX_SC_ERR_BUSY = 10, /* Resource is currently busy/active */
+ IMX_SC_ERR_FAIL = 11, /* General I/O failure */
+ IMX_SC_ERR_LAST
+};
+
+static int imx_sc_linux_errmap[IMX_SC_ERR_LAST] = {
+ 0, /* IMX_SC_ERR_NONE */
+ -EINVAL, /* IMX_SC_ERR_VERSION */
+ -EINVAL, /* IMX_SC_ERR_CONFIG */
+ -EINVAL, /* IMX_SC_ERR_PARM */
+ -EACCES, /* IMX_SC_ERR_NOACCESS */
+ -EACCES, /* IMX_SC_ERR_LOCKED */
+ -ERANGE, /* IMX_SC_ERR_UNAVAILABLE */
+ -EEXIST, /* IMX_SC_ERR_NOTFOUND */
+ -EPERM, /* IMX_SC_ERR_NOPOWER */
+ -EPIPE, /* IMX_SC_ERR_IPC */
+ -EBUSY, /* IMX_SC_ERR_BUSY */
+ -EIO, /* IMX_SC_ERR_FAIL */
+};
+
+static struct imx_sc_ipc *imx_sc_ipc_handle;
+
+static inline int imx_sc_to_linux_errno(int errno)
+{
+ if (errno >= IMX_SC_ERR_NONE && errno < IMX_SC_ERR_LAST)
+ return imx_sc_linux_errmap[errno];
+ return -EIO;
+}
+
+/*
+ * Get the default handle used by SCU
+ */
+int imx_scu_get_handle(struct imx_sc_ipc **ipc)
+{
+ if (!imx_sc_ipc_handle)
+ return -EPROBE_DEFER;
+
+ *ipc = imx_sc_ipc_handle;
+ return 0;
+}
+EXPORT_SYMBOL(imx_scu_get_handle);
+
+static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
+{
+ struct imx_sc_chan *sc_chan = container_of(c, struct imx_sc_chan, cl);
+ struct imx_sc_ipc *sc_ipc = sc_chan->sc_ipc;
+ struct imx_sc_rpc_msg *hdr;
+ u32 *data = msg;
+
+ if (sc_chan->idx == 0) {
+ hdr = msg;
+ sc_ipc->rx_size = hdr->size;
+ dev_dbg(sc_ipc->dev, "msg rx size %u\n", sc_ipc->rx_size);
+ if (sc_ipc->rx_size > 4)
+ dev_warn(sc_ipc->dev, "RPC does not support receiving over 4 words: %u\n",
+ sc_ipc->rx_size);
+ }
+
+ sc_ipc->msg[sc_chan->idx] = *data;
+ sc_ipc->count++;
+
+ dev_dbg(sc_ipc->dev, "mu %u msg %u 0x%x\n", sc_chan->idx,
+ sc_ipc->count, *data);
+
+ if ((sc_ipc->rx_size != 0) && (sc_ipc->count == sc_ipc->rx_size))
+ complete(&sc_ipc->done);
+}
+
+static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
+{
+ struct imx_sc_rpc_msg *hdr = msg;
+ struct imx_sc_chan *sc_chan;
+ u32 *data = msg;
+ int ret;
+ int i;
+
+ /* Check size */
+ if (hdr->size > IMX_SC_RPC_MAX_MSG)
+ return -EINVAL;
+
+ dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr->svc,
+ hdr->func, hdr->size);
+
+ for (i = 0; i < hdr->size; i++) {
+ sc_chan = &sc_ipc->chans[i % 4];
+ ret = mbox_send_message(sc_chan->ch, &data[i]);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * RPC command/response
+ */
+int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp)
+{
+ struct imx_sc_rpc_msg *hdr;
+ int ret;
+
+ if (WARN_ON(!sc_ipc || !msg))
+ return -EINVAL;
+
+ mutex_lock(&sc_ipc->lock);
+ reinit_completion(&sc_ipc->done);
+
+ sc_ipc->msg = msg;
+ sc_ipc->count = 0;
+ ret = imx_scu_ipc_write(sc_ipc, msg);
+ if (ret < 0) {
+ dev_err(sc_ipc->dev, "RPC send msg failed: %d\n", ret);
+ goto out;
+ }
+
+ if (have_resp) {
+ if (!wait_for_completion_timeout(&sc_ipc->done,
+ MAX_RX_TIMEOUT)) {
+ dev_err(sc_ipc->dev, "RPC send msg timeout\n");
+ mutex_unlock(&sc_ipc->lock);
+ return -ETIMEDOUT;
+ }
+
+ /* response status is stored in hdr->func field */
+ hdr = msg;
+ ret = hdr->func;
+ }
+
+out:
+ mutex_unlock(&sc_ipc->lock);
+
+ dev_dbg(sc_ipc->dev, "RPC SVC done\n");
+
+ return imx_sc_to_linux_errno(ret);
+}
+EXPORT_SYMBOL(imx_scu_call_rpc);
+
+static int imx_scu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct imx_sc_ipc *sc_ipc;
+ struct imx_sc_chan *sc_chan;
+ struct mbox_client *cl;
+ char *chan_name;
+ int ret;
+ int i;
+
+ sc_ipc = devm_kzalloc(dev, sizeof(*sc_ipc), GFP_KERNEL);
+ if (!sc_ipc)
+ return -ENOMEM;
+
+ for (i = 0; i < SCU_MU_CHAN_NUM; i++) {
+ if (i < 4)
+ chan_name = kasprintf(GFP_KERNEL, "tx%d", i);
+ else
+ chan_name = kasprintf(GFP_KERNEL, "rx%d", i - 4);
+
+ if (!chan_name)
+ return -ENOMEM;
+
+ sc_chan = &sc_ipc->chans[i];
+ cl = &sc_chan->cl;
+ cl->dev = dev;
+ cl->tx_block = false;
+ cl->knows_txdone = true;
+ cl->rx_callback = imx_scu_rx_callback;
+
+ sc_chan->sc_ipc = sc_ipc;
+ sc_chan->idx = i % 4;
+ sc_chan->ch = mbox_request_channel_byname(cl, chan_name);
+ if (IS_ERR(sc_chan->ch)) {
+ ret = PTR_ERR(sc_chan->ch);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to request mbox chan %s ret %d\n",
+ chan_name, ret);
+ return ret;
+ }
+
+ dev_dbg(dev, "request mbox chan %s\n", chan_name);
+ /* chan_name is not used anymore by framework */
+ kfree(chan_name);
+ }
+
+ sc_ipc->dev = dev;
+ mutex_init(&sc_ipc->lock);
+ init_completion(&sc_ipc->done);
+
+ imx_sc_ipc_handle = sc_ipc;
+
+ dev_info(dev, "NXP i.MX SCU Initialized\n");
+
+ return devm_of_platform_populate(dev);
+}
+
+static const struct of_device_id imx_scu_match[] = {
+ { .compatible = "fsl,imx-scu", },
+ { /* Sentinel */ }
+};
+
+static struct platform_driver imx_scu_driver = {
+ .driver = {
+ .name = "imx-scu",
+ .of_match_table = imx_scu_match,
+ },
+ .probe = imx_scu_probe,
+};
+builtin_platform_driver(imx_scu_driver);
+
+MODULE_AUTHOR("Dong Aisheng <aisheng.dong@nxp.com>");
+MODULE_DESCRIPTION("IMX SCU firmware protocol driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/imx/misc.c b/drivers/firmware/imx/misc.c
new file mode 100644
index 0000000000000000000000000000000000000000..97f5424dbac9872da032fdb221a8a932cfc47a26
--- /dev/null
+++ b/drivers/firmware/imx/misc.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ * Author: Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ * File containing client-side RPC functions for the MISC service. These
+ * function are ported to clients that communicate to the SC.
+ *
+ */
+
+#include <linux/firmware/imx/svc/misc.h>
+
+struct imx_sc_msg_req_misc_set_ctrl {
+ struct imx_sc_rpc_msg hdr;
+ u32 ctrl;
+ u32 val;
+ u16 resource;
+} __packed;
+
+struct imx_sc_msg_req_misc_get_ctrl {
+ struct imx_sc_rpc_msg hdr;
+ u32 ctrl;
+ u16 resource;
+} __packed;
+
+struct imx_sc_msg_resp_misc_get_ctrl {
+ struct imx_sc_rpc_msg hdr;
+ u32 val;
+} __packed;
+
+/*
+ * This function sets a miscellaneous control value.
+ *
+ * @param[in] ipc IPC handle
+ * @param[in] resource resource the control is associated with
+ * @param[in] ctrl control to change
+ * @param[in] val value to apply to the control
+ *
+ * @return Returns 0 for success and < 0 for errors.
+ */
+
+int imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
+ u8 ctrl, u32 val)
+{
+ struct imx_sc_msg_req_misc_set_ctrl msg;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = (uint8_t)IMX_SC_RPC_SVC_MISC;
+ hdr->func = (uint8_t)IMX_SC_MISC_FUNC_SET_CONTROL;
+ hdr->size = 4;
+
+ msg.ctrl = ctrl;
+ msg.val = val;
+ msg.resource = resource;
+
+ return imx_scu_call_rpc(ipc, &msg, true);
+}
+EXPORT_SYMBOL(imx_sc_misc_set_control);
+
+/*
+ * This function gets a miscellaneous control value.
+ *
+ * @param[in] ipc IPC handle
+ * @param[in] resource resource the control is associated with
+ * @param[in] ctrl control to get
+ * @param[out] val pointer to return the control value
+ *
+ * @return Returns 0 for success and < 0 for errors.
+ */
+
+int imx_sc_misc_get_control(struct imx_sc_ipc *ipc, u32 resource,
+ u8 ctrl, u32 *val)
+{
+ struct imx_sc_msg_req_misc_get_ctrl msg;
+ struct imx_sc_msg_resp_misc_get_ctrl *resp;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = (uint8_t)IMX_SC_RPC_SVC_MISC;
+ hdr->func = (uint8_t)IMX_SC_MISC_FUNC_GET_CONTROL;
+ hdr->size = 3;
+
+ msg.ctrl = ctrl;
+ msg.resource = resource;
+
+ ret = imx_scu_call_rpc(ipc, &msg, true);
+ if (ret)
+ return ret;
+
+ resp = (struct imx_sc_msg_resp_misc_get_ctrl *)&msg;
+ if (val != NULL)
+ *val = resp->val;
+
+ return 0;
+}
+EXPORT_SYMBOL(imx_sc_misc_get_control);
diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
index 0ec2ca87318c06c73976fb368f382667a78d3df1..29fbc818a573de695b07206f912181570c39040b 100644
--- a/drivers/firmware/meson/meson_sm.c
+++ b/drivers/firmware/meson/meson_sm.c
@@ -24,6 +24,7 @@
#include <linux/printk.h>
#include <linux/types.h>
#include <linux/sizes.h>
+ #include <linux/slab.h>
#include <linux/firmware/meson/meson_sm.h>
@@ -48,6 +49,7 @@ struct meson_sm_chip gxbb_chip = {
CMD(SM_EFUSE_READ, 0x82000030),
CMD(SM_EFUSE_WRITE, 0x82000031),
CMD(SM_EFUSE_USER_MAX, 0x82000033),
+ CMD(SM_GET_CHIP_ID, 0x82000044),
{ /* sentinel */ },
},
};
@@ -214,6 +216,57 @@ int meson_sm_call_write(void *buffer, unsigned int size, unsigned int cmd_index,
}
EXPORT_SYMBOL(meson_sm_call_write);
+#define SM_CHIP_ID_LENGTH 119
+#define SM_CHIP_ID_OFFSET 4
+#define SM_CHIP_ID_SIZE 12
+
+static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ uint8_t *id_buf;
+ int ret;
+
+ id_buf = kmalloc(SM_CHIP_ID_LENGTH, GFP_KERNEL);
+ if (!id_buf)
+ return -ENOMEM;
+
+ ret = meson_sm_call_read(id_buf, SM_CHIP_ID_LENGTH, SM_GET_CHIP_ID,
+ 0, 0, 0, 0, 0);
+ if (ret < 0) {
+ kfree(id_buf);
+ return ret;
+ }
+
+ ret = sprintf(buf, "%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ id_buf[SM_CHIP_ID_OFFSET + 0],
+ id_buf[SM_CHIP_ID_OFFSET + 1],
+ id_buf[SM_CHIP_ID_OFFSET + 2],
+ id_buf[SM_CHIP_ID_OFFSET + 3],
+ id_buf[SM_CHIP_ID_OFFSET + 4],
+ id_buf[SM_CHIP_ID_OFFSET + 5],
+ id_buf[SM_CHIP_ID_OFFSET + 6],
+ id_buf[SM_CHIP_ID_OFFSET + 7],
+ id_buf[SM_CHIP_ID_OFFSET + 8],
+ id_buf[SM_CHIP_ID_OFFSET + 9],
+ id_buf[SM_CHIP_ID_OFFSET + 10],
+ id_buf[SM_CHIP_ID_OFFSET + 11]);
+
+ kfree(id_buf);
+
+ return ret;
+}
+
+static DEVICE_ATTR_RO(serial);
+
+static struct attribute *meson_sm_sysfs_attributes[] = {
+ &dev_attr_serial.attr,
+ NULL,
+};
+
+static const struct attribute_group meson_sm_sysfs_attr_group = {
+ .attrs = meson_sm_sysfs_attributes,
+};
+
static const struct of_device_id meson_sm_ids[] = {
{ .compatible = "amlogic,meson-gxbb-sm", .data = &gxbb_chip },
{ /* sentinel */ },
@@ -242,6 +295,9 @@ static int __init meson_sm_probe(struct platform_device *pdev)
fw.chip = chip;
pr_info("secure-monitor enabled\n");
+ if (sysfs_create_group(&pdev->dev.kobj, &meson_sm_sysfs_attr_group))
+ goto out_in_base;
+
return 0;
out_in_base:
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index e778af766fae3c2c88d20e8f7ae6f47f9114935c..af4eee86919d86418245fd8e66fd47ed423dee13 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -525,34 +525,44 @@ static int qcom_scm_probe(struct platform_device *pdev)
return ret;
clks = (unsigned long)of_device_get_match_data(&pdev->dev);
- if (clks & SCM_HAS_CORE_CLK) {
- scm->core_clk = devm_clk_get(&pdev->dev, "core");
- if (IS_ERR(scm->core_clk)) {
- if (PTR_ERR(scm->core_clk) != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "failed to acquire core clk\n");
+
+ scm->core_clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(scm->core_clk)) {
+ if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
+ return PTR_ERR(scm->core_clk);
+
+ if (clks & SCM_HAS_CORE_CLK) {
+ dev_err(&pdev->dev, "failed to acquire core clk\n");
return PTR_ERR(scm->core_clk);
}
+
+ scm->core_clk = NULL;
}
- if (clks & SCM_HAS_IFACE_CLK) {
- scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
- if (IS_ERR(scm->iface_clk)) {
- if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "failed to acquire iface clk\n");
+ scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
+ if (IS_ERR(scm->iface_clk)) {
+ if (PTR_ERR(scm->iface_clk) == -EPROBE_DEFER)
+ return PTR_ERR(scm->iface_clk);
+
+ if (clks & SCM_HAS_IFACE_CLK) {
+ dev_err(&pdev->dev, "failed to acquire iface clk\n");
return PTR_ERR(scm->iface_clk);
}
+
+ scm->iface_clk = NULL;
}
- if (clks & SCM_HAS_BUS_CLK) {
- scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
- if (IS_ERR(scm->bus_clk)) {
- if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "failed to acquire bus clk\n");
+ scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(scm->bus_clk)) {
+ if (PTR_ERR(scm->bus_clk) == -EPROBE_DEFER)
+ return PTR_ERR(scm->bus_clk);
+
+ if (clks & SCM_HAS_BUS_CLK) {
+ dev_err(&pdev->dev, "failed to acquire bus clk\n");
return PTR_ERR(scm->bus_clk);
}
+
+ scm->bus_clk = NULL;
}
scm->reset.ops = &qcom_scm_pas_reset_ops;
@@ -594,23 +604,23 @@ static const struct of_device_id qcom_scm_dt_match[] = {
{ .compatible = "qcom,scm-apq8064",
/* FIXME: This should have .data = (void *) SCM_HAS_CORE_CLK */
},
- { .compatible = "qcom,scm-msm8660",
- .data = (void *) SCM_HAS_CORE_CLK,
- },
- { .compatible = "qcom,scm-msm8960",
- .data = (void *) SCM_HAS_CORE_CLK,
- },
- { .compatible = "qcom,scm-msm8996",
- .data = NULL, /* no clocks */
+ { .compatible = "qcom,scm-apq8084", .data = (void *)(SCM_HAS_CORE_CLK |
+ SCM_HAS_IFACE_CLK |
+ SCM_HAS_BUS_CLK)
},
- { .compatible = "qcom,scm-ipq4019",
- .data = NULL, /* no clocks */
+ { .compatible = "qcom,scm-ipq4019" },
+ { .compatible = "qcom,scm-msm8660", .data = (void *) SCM_HAS_CORE_CLK },
+ { .compatible = "qcom,scm-msm8960", .data = (void *) SCM_HAS_CORE_CLK },
+ { .compatible = "qcom,scm-msm8916", .data = (void *)(SCM_HAS_CORE_CLK |
+ SCM_HAS_IFACE_CLK |
+ SCM_HAS_BUS_CLK)
},
- { .compatible = "qcom,scm",
- .data = (void *)(SCM_HAS_CORE_CLK
- | SCM_HAS_IFACE_CLK
- | SCM_HAS_BUS_CLK),
+ { .compatible = "qcom,scm-msm8974", .data = (void *)(SCM_HAS_CORE_CLK |
+ SCM_HAS_IFACE_CLK |
+ SCM_HAS_BUS_CLK)
},
+ { .compatible = "qcom,scm-msm8996" },
+ { .compatible = "qcom,scm" },
{}
};
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
index 14a456afa379a073ee4cd233f96153edc1a79a3c..a3d5b518c10e4a13deeba7c6e9309c13c33cdded 100644
--- a/drivers/firmware/tegra/bpmp.c
+++ b/drivers/firmware/tegra/bpmp.c
@@ -18,6 +18,7 @@
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
#include <linux/semaphore.h>
#include <linux/sched/clock.h>
@@ -843,6 +844,23 @@ static int tegra_bpmp_probe(struct platform_device *pdev)
return err;
}
+static int __maybe_unused tegra_bpmp_resume(struct device *dev)
+{
+ struct tegra_bpmp *bpmp = dev_get_drvdata(dev);
+ unsigned int i;
+
+ /* reset message channels */
+ tegra_bpmp_channel_reset(bpmp->tx_channel);
+ tegra_bpmp_channel_reset(bpmp->rx_channel);
+
+ for (i = 0; i < bpmp->threaded.count; i++)
+ tegra_bpmp_channel_reset(&bpmp->threaded_channels[i]);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tegra_bpmp_pm_ops, NULL, tegra_bpmp_resume);
+
static const struct tegra_bpmp_soc tegra186_soc = {
.channels = {
.cpu_tx = {
@@ -871,6 +889,7 @@ static struct platform_driver tegra_bpmp_driver = {
.driver = {
.name = "tegra-bpmp",
.of_match_table = tegra_bpmp_match,
+ .pm = &tegra_bpmp_pm_ops,
},
.probe = tegra_bpmp_probe,
};
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 7fa744793bc5c900eb5d6998848aba233bd1875f..69ed1464175c058cfdeda0eb47faf470914477bc 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -66,14 +66,14 @@ struct ti_sci_xfers_info {
/**
* struct ti_sci_desc - Description of SoC integration
- * @host_id: Host identifier representing the compute entity
+ * @default_host_id: Host identifier representing the compute entity
* @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
* @max_msgs: Maximum number of messages that can be pending
* simultaneously in the system
* @max_msg_size: Maximum size of data per message that can be handled.
*/
struct ti_sci_desc {
- u8 host_id;
+ u8 default_host_id;
int max_rx_timeout_ms;
int max_msgs;
int max_msg_size;
@@ -94,6 +94,7 @@ struct ti_sci_desc {
* @chan_rx: Receive mailbox channel
* @minfo: Message info
* @node: list head
+ * @host_id: Host ID
* @users: Number of users of this instance
*/
struct ti_sci_info {
@@ -110,6 +111,7 @@ struct ti_sci_info {
struct mbox_chan *chan_rx;
struct ti_sci_xfers_info minfo;
struct list_head node;
+ u8 host_id;
/* protected by ti_sci_list_mutex */
int users;
@@ -370,7 +372,7 @@ static struct ti_sci_xfer *ti_sci_get_one_xfer(struct ti_sci_info *info,
hdr->seq = xfer_id;
hdr->type = msg_type;
- hdr->host = info->desc->host_id;
+ hdr->host = info->host_id;
hdr->flags = msg_flags;
return xfer;
@@ -1793,7 +1795,7 @@ static int tisci_reboot_handler(struct notifier_block *nb, unsigned long mode,
/* Description for K2G */
static const struct ti_sci_desc ti_sci_pmmc_k2g_desc = {
- .host_id = 2,
+ .default_host_id = 2,
/* Conservative duration */
.max_rx_timeout_ms = 1000,
/* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */
@@ -1819,6 +1821,7 @@ static int ti_sci_probe(struct platform_device *pdev)
int ret = -EINVAL;
int i;
int reboot = 0;
+ u32 h_id;
of_id = of_match_device(ti_sci_of_match, dev);
if (!of_id) {
@@ -1833,6 +1836,19 @@ static int ti_sci_probe(struct platform_device *pdev)
info->dev = dev;
info->desc = desc;
+ ret = of_property_read_u32(dev->of_node, "ti,host-id", &h_id);
+ /* if the property is not present in DT, use a default from desc */
+ if (ret < 0) {
+ info->host_id = info->desc->default_host_id;
+ } else {
+ if (!h_id) {
+ dev_warn(dev, "Host ID 0 is reserved for firmware\n");
+ info->host_id = info->desc->default_host_id;
+ } else {
+ info->host_id = h_id;
+ }
+ }
+
reboot = of_property_read_bool(dev->of_node,
"ti,system-reboot-controller");
INIT_LIST_HEAD(&info->node);
diff --git a/drivers/firmware/xilinx/Kconfig b/drivers/firmware/xilinx/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..8f44b9cd295a3790a71af40a3802faf65c41df7c
--- /dev/null
+++ b/drivers/firmware/xilinx/Kconfig
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+# Kconfig for Xilinx firmwares
+
+menu "Zynq MPSoC Firmware Drivers"
+ depends on ARCH_ZYNQMP
+
+config ZYNQMP_FIRMWARE
+ bool "Enable Xilinx Zynq MPSoC firmware interface"
+ help
+ Firmware interface driver is used by different
+ drivers to communicate with the firmware for
+ various platform management services.
+ Say yes to enable ZynqMP firmware interface driver.
+ If in doubt, say N.
+
+config ZYNQMP_FIRMWARE_DEBUG
+ bool "Enable Xilinx Zynq MPSoC firmware debug APIs"
+ depends on ZYNQMP_FIRMWARE && DEBUG_FS
+ help
+ Say yes to enable ZynqMP firmware interface debug APIs.
+ If in doubt, say N.
+
+endmenu
diff --git a/drivers/firmware/xilinx/Makefile b/drivers/firmware/xilinx/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..875a53703c82f85ac7af80f57a2235d09de3c386
--- /dev/null
+++ b/drivers/firmware/xilinx/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for Xilinx firmwares
+
+obj-$(CONFIG_ZYNQMP_FIRMWARE) += zynqmp.o
+obj-$(CONFIG_ZYNQMP_FIRMWARE_DEBUG) += zynqmp-debug.o
diff --git a/drivers/firmware/xilinx/zynqmp-debug.c b/drivers/firmware/xilinx/zynqmp-debug.c
new file mode 100644
index 0000000000000000000000000000000000000000..2771df6df379e803a9feca4770fccae4549154ee
--- /dev/null
+++ b/drivers/firmware/xilinx/zynqmp-debug.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Zynq MPSoC Firmware layer for debugfs APIs
+ *
+ * Copyright (C) 2014-2018 Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Davorin Mista <davorin.mista@aggios.com>
+ * Jolly Shah <jollys@xilinx.com>
+ * Rajan Vaja <rajanv@xilinx.com>
+ */
+
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+#include "zynqmp-debug.h"
+
+#define PM_API_NAME_LEN 50
+
+struct pm_api_info {
+ u32 api_id;
+ char api_name[PM_API_NAME_LEN];
+ char api_name_len;
+};
+
+static char debugfs_buf[PAGE_SIZE];
+
+#define PM_API(id) {id, #id, strlen(#id)}
+static struct pm_api_info pm_api_list[] = {
+ PM_API(PM_GET_API_VERSION),
+ PM_API(PM_QUERY_DATA),
+};
+
+struct dentry *firmware_debugfs_root;
+
+/**
+ * zynqmp_pm_argument_value() - Extract argument value from a PM-API request
+ * @arg: Entered PM-API argument in string format
+ *
+ * Return: Argument value in unsigned integer format on success
+ * 0 otherwise
+ */
+static u64 zynqmp_pm_argument_value(char *arg)
+{
+ u64 value;
+
+ if (!arg)
+ return 0;
+
+ if (!kstrtou64(arg, 0, &value))
+ return value;
+
+ return 0;
+}
+
+/**
+ * get_pm_api_id() - Extract API-ID from a PM-API request
+ * @pm_api_req: Entered PM-API argument in string format
+ * @pm_id: API-ID
+ *
+ * Return: 0 on success else error code
+ */
+static int get_pm_api_id(char *pm_api_req, u32 *pm_id)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pm_api_list) ; i++) {
+ if (!strncasecmp(pm_api_req, pm_api_list[i].api_name,
+ pm_api_list[i].api_name_len)) {
+ *pm_id = pm_api_list[i].api_id;
+ break;
+ }
+ }
+
+ /* If no name was entered look for PM-API ID instead */
+ if (i == ARRAY_SIZE(pm_api_list) && kstrtouint(pm_api_req, 10, pm_id))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int process_api_request(u32 pm_id, u64 *pm_api_arg, u32 *pm_api_ret)
+{
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+ u32 pm_api_version;
+ int ret;
+ struct zynqmp_pm_query_data qdata = {0};
+
+ if (!eemi_ops)
+ return -ENXIO;
+
+ switch (pm_id) {
+ case PM_GET_API_VERSION:
+ ret = eemi_ops->get_api_version(&pm_api_version);
+ sprintf(debugfs_buf, "PM-API Version = %d.%d\n",
+ pm_api_version >> 16, pm_api_version & 0xffff);
+ break;
+ case PM_QUERY_DATA:
+ qdata.qid = pm_api_arg[0];
+ qdata.arg1 = pm_api_arg[1];
+ qdata.arg2 = pm_api_arg[2];
+ qdata.arg3 = pm_api_arg[3];
+
+ ret = eemi_ops->query_data(qdata, pm_api_ret);
+ if (ret)
+ break;
+
+ switch (qdata.qid) {
+ case PM_QID_CLOCK_GET_NAME:
+ sprintf(debugfs_buf, "Clock name = %s\n",
+ (char *)pm_api_ret);
+ break;
+ case PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS:
+ sprintf(debugfs_buf, "Multiplier = %d, Divider = %d\n",
+ pm_api_ret[1], pm_api_ret[2]);
+ break;
+ default:
+ sprintf(debugfs_buf,
+ "data[0] = 0x%08x\ndata[1] = 0x%08x\n data[2] = 0x%08x\ndata[3] = 0x%08x\n",
+ pm_api_ret[0], pm_api_ret[1],
+ pm_api_ret[2], pm_api_ret[3]);
+ }
+ break;
+ default:
+ sprintf(debugfs_buf, "Unsupported PM-API request\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_debugfs_api_write() - debugfs write function
+ * @file: User file
+ * @ptr: User entered PM-API string
+ * @len: Length of the userspace buffer
+ * @off: Offset within the file
+ *
+ * Used for triggering pm api functions by writing
+ * echo <pm_api_id> > /sys/kernel/debug/zynqmp_pm/power or
+ * echo <pm_api_name> > /sys/kernel/debug/zynqmp_pm/power
+ *
+ * Return: Number of bytes copied if PM-API request succeeds,
+ * the corresponding error code otherwise
+ */
+static ssize_t zynqmp_pm_debugfs_api_write(struct file *file,
+ const char __user *ptr, size_t len,
+ loff_t *off)
+{
+ char *kern_buff, *tmp_buff;
+ char *pm_api_req;
+ u32 pm_id = 0;
+ u64 pm_api_arg[4] = {0, 0, 0, 0};
+ /* Return values from PM APIs calls */
+ u32 pm_api_ret[4] = {0, 0, 0, 0};
+
+ int ret;
+ int i = 0;
+
+ strcpy(debugfs_buf, "");
+
+ if (*off != 0 || len == 0)
+ return -EINVAL;
+
+ kern_buff = kzalloc(len, GFP_KERNEL);
+ if (!kern_buff)
+ return -ENOMEM;
+
+ tmp_buff = kern_buff;
+
+ ret = strncpy_from_user(kern_buff, ptr, len);
+ if (ret < 0) {
+ ret = -EFAULT;
+ goto err;
+ }
+
+ /* Read the API name from a user request */
+ pm_api_req = strsep(&kern_buff, " ");
+
+ ret = get_pm_api_id(pm_api_req, &pm_id);
+ if (ret < 0)
+ goto err;
+
+ /* Read node_id and arguments from the PM-API request */
+ pm_api_req = strsep(&kern_buff, " ");
+ while ((i < ARRAY_SIZE(pm_api_arg)) && pm_api_req) {
+ pm_api_arg[i++] = zynqmp_pm_argument_value(pm_api_req);
+ pm_api_req = strsep(&kern_buff, " ");
+ }
+
+ ret = process_api_request(pm_id, pm_api_arg, pm_api_ret);
+
+err:
+ kfree(tmp_buff);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+/**
+ * zynqmp_pm_debugfs_api_read() - debugfs read function
+ * @file: User file
+ * @ptr: Requested pm_api_version string
+ * @len: Length of the userspace buffer
+ * @off: Offset within the file
+ *
+ * Return: Length of the version string on success
+ * else error code
+ */
+static ssize_t zynqmp_pm_debugfs_api_read(struct file *file, char __user *ptr,
+ size_t len, loff_t *off)
+{
+ return simple_read_from_buffer(ptr, len, off, debugfs_buf,
+ strlen(debugfs_buf));
+}
+
+/* Setup debugfs fops */
+static const struct file_operations fops_zynqmp_pm_dbgfs = {
+ .owner = THIS_MODULE,
+ .write = zynqmp_pm_debugfs_api_write,
+ .read = zynqmp_pm_debugfs_api_read,
+};
+
+/**
+ * zynqmp_pm_api_debugfs_init - Initialize debugfs interface
+ *
+ * Return: None
+ */
+void zynqmp_pm_api_debugfs_init(void)
+{
+ /* Initialize debugfs interface */
+ firmware_debugfs_root = debugfs_create_dir("zynqmp-firmware", NULL);
+ debugfs_create_file("pm", 0660, firmware_debugfs_root, NULL,
+ &fops_zynqmp_pm_dbgfs);
+}
+
+/**
+ * zynqmp_pm_api_debugfs_exit - Remove debugfs interface
+ *
+ * Return: None
+ */
+void zynqmp_pm_api_debugfs_exit(void)
+{
+ debugfs_remove_recursive(firmware_debugfs_root);
+}
diff --git a/drivers/firmware/xilinx/zynqmp-debug.h b/drivers/firmware/xilinx/zynqmp-debug.h
new file mode 100644
index 0000000000000000000000000000000000000000..9929f8b433f50678f7b71dfd4ff0a459cd0a81af
--- /dev/null
+++ b/drivers/firmware/xilinx/zynqmp-debug.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ * Copyright (C) 2014-2018 Xilinx
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Davorin Mista <davorin.mista@aggios.com>
+ * Jolly Shah <jollys@xilinx.com>
+ * Rajan Vaja <rajanv@xilinx.com>
+ */
+
+#ifndef __FIRMWARE_ZYNQMP_DEBUG_H__
+#define __FIRMWARE_ZYNQMP_DEBUG_H__
+
+#if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE_DEBUG)
+void zynqmp_pm_api_debugfs_init(void);
+void zynqmp_pm_api_debugfs_exit(void);
+#else
+static inline void zynqmp_pm_api_debugfs_init(void) { }
+static inline void zynqmp_pm_api_debugfs_exit(void) { }
+#endif
+
+#endif /* __FIRMWARE_ZYNQMP_DEBUG_H__ */
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
new file mode 100644
index 0000000000000000000000000000000000000000..9a1c72a9280f1bce66ee5544e39b8b8abf86638c
--- /dev/null
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -0,0 +1,565 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ * Copyright (C) 2014-2018 Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Davorin Mista <davorin.mista@aggios.com>
+ * Jolly Shah <jollys@xilinx.com>
+ * Rajan Vaja <rajanv@xilinx.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+#include "zynqmp-debug.h"
+
+/**
+ * zynqmp_pm_ret_code() - Convert PMU-FW error codes to Linux error codes
+ * @ret_status: PMUFW return code
+ *
+ * Return: corresponding Linux error code
+ */
+static int zynqmp_pm_ret_code(u32 ret_status)
+{
+ switch (ret_status) {
+ case XST_PM_SUCCESS:
+ case XST_PM_DOUBLE_REQ:
+ return 0;
+ case XST_PM_NO_ACCESS:
+ return -EACCES;
+ case XST_PM_ABORT_SUSPEND:
+ return -ECANCELED;
+ case XST_PM_INTERNAL:
+ case XST_PM_CONFLICT:
+ case XST_PM_INVALID_NODE:
+ default:
+ return -EINVAL;
+ }
+}
+
+static noinline int do_fw_call_fail(u64 arg0, u64 arg1, u64 arg2,
+ u32 *ret_payload)
+{
+ return -ENODEV;
+}
+
+/*
+ * PM function call wrapper
+ * Invoke do_fw_call_smc or do_fw_call_hvc, depending on the configuration
+ */
+static int (*do_fw_call)(u64, u64, u64, u32 *ret_payload) = do_fw_call_fail;
+
+/**
+ * do_fw_call_smc() - Call system-level platform management layer (SMC)
+ * @arg0: Argument 0 to SMC call
+ * @arg1: Argument 1 to SMC call
+ * @arg2: Argument 2 to SMC call
+ * @ret_payload: Returned value array
+ *
+ * Invoke platform management function via SMC call (no hypervisor present).
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static noinline int do_fw_call_smc(u64 arg0, u64 arg1, u64 arg2,
+ u32 *ret_payload)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
+
+ if (ret_payload) {
+ ret_payload[0] = lower_32_bits(res.a0);
+ ret_payload[1] = upper_32_bits(res.a0);
+ ret_payload[2] = lower_32_bits(res.a1);
+ ret_payload[3] = upper_32_bits(res.a1);
+ }
+
+ return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
+}
+
+/**
+ * do_fw_call_hvc() - Call system-level platform management layer (HVC)
+ * @arg0: Argument 0 to HVC call
+ * @arg1: Argument 1 to HVC call
+ * @arg2: Argument 2 to HVC call
+ * @ret_payload: Returned value array
+ *
+ * Invoke platform management function via HVC
+ * HVC-based for communication through hypervisor
+ * (no direct communication with ATF).
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2,
+ u32 *ret_payload)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_hvc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
+
+ if (ret_payload) {
+ ret_payload[0] = lower_32_bits(res.a0);
+ ret_payload[1] = upper_32_bits(res.a0);
+ ret_payload[2] = lower_32_bits(res.a1);
+ ret_payload[3] = upper_32_bits(res.a1);
+ }
+
+ return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
+}
+
+/**
+ * zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer
+ * caller function depending on the configuration
+ * @pm_api_id: Requested PM-API call
+ * @arg0: Argument 0 to requested PM-API call
+ * @arg1: Argument 1 to requested PM-API call
+ * @arg2: Argument 2 to requested PM-API call
+ * @arg3: Argument 3 to requested PM-API call
+ * @ret_payload: Returned value array
+ *
+ * Invoke platform management function for SMC or HVC call, depending on
+ * configuration.
+ * Following SMC Calling Convention (SMCCC) for SMC64:
+ * Pm Function Identifier,
+ * PM_SIP_SVC + PM_API_ID =
+ * ((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT)
+ * ((SMC_64) << FUNCID_CC_SHIFT)
+ * ((SIP_START) << FUNCID_OEN_SHIFT)
+ * ((PM_API_ID) & FUNCID_NUM_MASK))
+ *
+ * PM_SIP_SVC - Registered ZynqMP SIP Service Call.
+ * PM_API_ID - Platform Management API ID.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
+ u32 arg2, u32 arg3, u32 *ret_payload)
+{
+ /*
+ * Added SIP service call Function Identifier
+ * Make sure to stay in x0 register
+ */
+ u64 smc_arg[4];
+
+ smc_arg[0] = PM_SIP_SVC | pm_api_id;
+ smc_arg[1] = ((u64)arg1 << 32) | arg0;
+ smc_arg[2] = ((u64)arg3 << 32) | arg2;
+
+ return do_fw_call(smc_arg[0], smc_arg[1], smc_arg[2], ret_payload);
+}
+
+static u32 pm_api_version;
+static u32 pm_tz_version;
+
+/**
+ * zynqmp_pm_get_api_version() - Get version number of PMU PM firmware
+ * @version: Returned version value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_get_api_version(u32 *version)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!version)
+ return -EINVAL;
+
+ /* Check is PM API version already verified */
+ if (pm_api_version > 0) {
+ *version = pm_api_version;
+ return 0;
+ }
+ ret = zynqmp_pm_invoke_fn(PM_GET_API_VERSION, 0, 0, 0, 0, ret_payload);
+ *version = ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_get_trustzone_version() - Get secure trustzone firmware version
+ * @version: Returned version value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_get_trustzone_version(u32 *version)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!version)
+ return -EINVAL;
+
+ /* Check is PM trustzone version already verified */
+ if (pm_tz_version > 0) {
+ *version = pm_tz_version;
+ return 0;
+ }
+ ret = zynqmp_pm_invoke_fn(PM_GET_TRUSTZONE_VERSION, 0, 0,
+ 0, 0, ret_payload);
+ *version = ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * get_set_conduit_method() - Choose SMC or HVC based communication
+ * @np: Pointer to the device_node structure
+ *
+ * Use SMC or HVC-based functions to communicate with EL2/EL3.
+ *
+ * Return: Returns 0 on success or error code
+ */
+static int get_set_conduit_method(struct device_node *np)
+{
+ const char *method;
+
+ if (of_property_read_string(np, "method", &method)) {
+ pr_warn("%s missing \"method\" property\n", __func__);
+ return -ENXIO;
+ }
+
+ if (!strcmp("hvc", method)) {
+ do_fw_call = do_fw_call_hvc;
+ } else if (!strcmp("smc", method)) {
+ do_fw_call = do_fw_call_smc;
+ } else {
+ pr_warn("%s Invalid \"method\" property: %s\n",
+ __func__, method);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * zynqmp_pm_query_data() - Get query data from firmware
+ * @qdata: Variable to the zynqmp_pm_query_data structure
+ * @out: Returned output value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata, u32 *out)
+{
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_QUERY_DATA, qdata.qid, qdata.arg1,
+ qdata.arg2, qdata.arg3, out);
+
+ /*
+ * For clock name query, all bytes in SMC response are clock name
+ * characters and return code is always success. For invalid clocks,
+ * clock name bytes would be zeros.
+ */
+ return qdata.qid == PM_QID_CLOCK_GET_NAME ? 0 : ret;
+}
+
+/**
+ * zynqmp_pm_clock_enable() - Enable the clock for given id
+ * @clock_id: ID of the clock to be enabled
+ *
+ * This function is used by master to enable the clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_enable(u32 clock_id)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_ENABLE, clock_id, 0, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_disable() - Disable the clock for given id
+ * @clock_id: ID of the clock to be disable
+ *
+ * This function is used by master to disable the clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_disable(u32 clock_id)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_DISABLE, clock_id, 0, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getstate() - Get the clock state for given id
+ * @clock_id: ID of the clock to be queried
+ * @state: 1/0 (Enabled/Disabled)
+ *
+ * This function is used by master to get the state of clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETSTATE, clock_id, 0,
+ 0, 0, ret_payload);
+ *state = ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_setdivider() - Set the clock divider for given id
+ * @clock_id: ID of the clock
+ * @divider: divider value
+ *
+ * This function is used by master to set divider for any clock
+ * to achieve desired rate.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_SETDIVIDER, clock_id, divider,
+ 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getdivider() - Get the clock divider for given id
+ * @clock_id: ID of the clock
+ * @divider: divider value
+ *
+ * This function is used by master to get divider values
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETDIVIDER, clock_id, 0,
+ 0, 0, ret_payload);
+ *divider = ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_setrate() - Set the clock rate for given id
+ * @clock_id: ID of the clock
+ * @rate: rate value in hz
+ *
+ * This function is used by master to set rate for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_setrate(u32 clock_id, u64 rate)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_SETRATE, clock_id,
+ lower_32_bits(rate),
+ upper_32_bits(rate),
+ 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getrate() - Get the clock rate for given id
+ * @clock_id: ID of the clock
+ * @rate: rate value in hz
+ *
+ * This function is used by master to get rate
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getrate(u32 clock_id, u64 *rate)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETRATE, clock_id, 0,
+ 0, 0, ret_payload);
+ *rate = ((u64)ret_payload[2] << 32) | ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_setparent() - Set the clock parent for given id
+ * @clock_id: ID of the clock
+ * @parent_id: parent id
+ *
+ * This function is used by master to set parent for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_SETPARENT, clock_id,
+ parent_id, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getparent() - Get the clock parent for given id
+ * @clock_id: ID of the clock
+ * @parent_id: parent id
+ *
+ * This function is used by master to get parent index
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETPARENT, clock_id, 0,
+ 0, 0, ret_payload);
+ *parent_id = ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * zynqmp_is_valid_ioctl() - Check whether IOCTL ID is valid or not
+ * @ioctl_id: IOCTL ID
+ *
+ * Return: 1 if IOCTL is valid else 0
+ */
+static inline int zynqmp_is_valid_ioctl(u32 ioctl_id)
+{
+ switch (ioctl_id) {
+ case IOCTL_SET_PLL_FRAC_MODE:
+ case IOCTL_GET_PLL_FRAC_MODE:
+ case IOCTL_SET_PLL_FRAC_DATA:
+ case IOCTL_GET_PLL_FRAC_DATA:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+/**
+ * zynqmp_pm_ioctl() - PM IOCTL API for device control and configs
+ * @node_id: Node ID of the device
+ * @ioctl_id: ID of the requested IOCTL
+ * @arg1: Argument 1 to requested IOCTL call
+ * @arg2: Argument 2 to requested IOCTL call
+ * @out: Returned output value
+ *
+ * This function calls IOCTL to firmware for device control and configuration.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_ioctl(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2,
+ u32 *out)
+{
+ if (!zynqmp_is_valid_ioctl(ioctl_id))
+ return -EINVAL;
+
+ return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, ioctl_id,
+ arg1, arg2, out);
+}
+
+static const struct zynqmp_eemi_ops eemi_ops = {
+ .get_api_version = zynqmp_pm_get_api_version,
+ .query_data = zynqmp_pm_query_data,
+ .clock_enable = zynqmp_pm_clock_enable,
+ .clock_disable = zynqmp_pm_clock_disable,
+ .clock_getstate = zynqmp_pm_clock_getstate,
+ .clock_setdivider = zynqmp_pm_clock_setdivider,
+ .clock_getdivider = zynqmp_pm_clock_getdivider,
+ .clock_setrate = zynqmp_pm_clock_setrate,
+ .clock_getrate = zynqmp_pm_clock_getrate,
+ .clock_setparent = zynqmp_pm_clock_setparent,
+ .clock_getparent = zynqmp_pm_clock_getparent,
+ .ioctl = zynqmp_pm_ioctl,
+};
+
+/**
+ * zynqmp_pm_get_eemi_ops - Get eemi ops functions
+ *
+ * Return: Pointer of eemi_ops structure
+ */
+const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
+{
+ return &eemi_ops;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_eemi_ops);
+
+static int zynqmp_firmware_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np;
+ int ret;
+
+ np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp");
+ if (!np)
+ return 0;
+ of_node_put(np);
+
+ ret = get_set_conduit_method(dev->of_node);
+ if (ret)
+ return ret;
+
+ /* Check PM API version number */
+ zynqmp_pm_get_api_version(&pm_api_version);
+ if (pm_api_version < ZYNQMP_PM_VERSION) {
+ panic("%s Platform Management API version error. Expected: v%d.%d - Found: v%d.%d\n",
+ __func__,
+ ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR,
+ pm_api_version >> 16, pm_api_version & 0xFFFF);
+ }
+
+ pr_info("%s Platform Management API v%d.%d\n", __func__,
+ pm_api_version >> 16, pm_api_version & 0xFFFF);
+
+ /* Check trustzone version number */
+ ret = zynqmp_pm_get_trustzone_version(&pm_tz_version);
+ if (ret)
+ panic("Legacy trustzone found without version support\n");
+
+ if (pm_tz_version < ZYNQMP_TZ_VERSION)
+ panic("%s Trustzone version error. Expected: v%d.%d - Found: v%d.%d\n",
+ __func__,
+ ZYNQMP_TZ_VERSION_MAJOR, ZYNQMP_TZ_VERSION_MINOR,
+ pm_tz_version >> 16, pm_tz_version & 0xFFFF);
+
+ pr_info("%s Trustzone version v%d.%d\n", __func__,
+ pm_tz_version >> 16, pm_tz_version & 0xFFFF);
+
+ zynqmp_pm_api_debugfs_init();
+
+ return of_platform_populate(dev->of_node, NULL, NULL, dev);
+}
+
+static int zynqmp_firmware_remove(struct platform_device *pdev)
+{
+ zynqmp_pm_api_debugfs_exit();
+
+ return 0;
+}
+
+static const struct of_device_id zynqmp_firmware_of_match[] = {
+ {.compatible = "xlnx,zynqmp-firmware"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, zynqmp_firmware_of_match);
+
+static struct platform_driver zynqmp_firmware_driver = {
+ .driver = {
+ .name = "zynqmp_firmware",
+ .of_match_table = zynqmp_firmware_of_match,
+ },
+ .probe = zynqmp_firmware_probe,
+ .remove = zynqmp_firmware_remove,
+};
+module_platform_driver(zynqmp_firmware_driver);
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index b907865d4664db167a4931edb3479cf11069de70..c3748b414c27911e643d813b1d32281d3ef00a47 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -327,8 +327,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
return -EINVAL;
}
- ebid = devm_kzalloc(ebi->dev,
- sizeof(*ebid) + (numcs * sizeof(*ebid->configs)),
+ ebid = devm_kzalloc(ebi->dev, struct_size(ebid, configs, numcs),
GFP_KERNEL);
if (!ebid)
return -ENOMEM;
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 13d28fdbdbb535cdf665b39c8b52ad5127d0b9b9..c21da9fe51ec0f1ef47c4798379904433e2b553f 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -98,6 +98,15 @@ config RESET_QCOM_AOSS
reset signals provided by AOSS for Modem, Venus, ADSP,
GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
+config RESET_QCOM_PDC
+ tristate "Qualcomm PDC Reset Driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ This enables the PDC (Power Domain Controller) reset driver
+ for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want
+ to control reset signals provided by PDC for Modem, Compute,
+ Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
+
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 4243c38228e284478048c42cfbf0f900b7d7aed4..d08e8b90046a96f8d38b770126a13ef1df8d0283 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
+obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 225e34c56b94a2e315f17a598bd7a74d6dae1932..d1887c0ed5d3f2aa7e51f94f5f9e61cbf50ca5ea 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -496,28 +496,29 @@ struct reset_control *__of_reset_control_get(struct device_node *node,
break;
}
}
- of_node_put(args.np);
if (!rcdev) {
- mutex_unlock(&reset_list_mutex);
- return ERR_PTR(-EPROBE_DEFER);
+ rstc = ERR_PTR(-EPROBE_DEFER);
+ goto out;
}
if (WARN_ON(args.args_count != rcdev->of_reset_n_cells)) {
- mutex_unlock(&reset_list_mutex);
- return ERR_PTR(-EINVAL);
+ rstc = ERR_PTR(-EINVAL);
+ goto out;
}
rstc_id = rcdev->of_xlate(rcdev, &args);
if (rstc_id < 0) {
- mutex_unlock(&reset_list_mutex);
- return ERR_PTR(rstc_id);
+ rstc = ERR_PTR(rstc_id);
+ goto out;
}
/* reset_list_mutex also protects the rcdev's reset_control list */
rstc = __reset_control_get_internal(rcdev, rstc_id, shared);
+out:
mutex_unlock(&reset_list_mutex);
+ of_node_put(args.np);
return rstc;
}
diff --git a/drivers/reset/reset-qcom-pdc.c b/drivers/reset/reset-qcom-pdc.c
new file mode 100644
index 0000000000000000000000000000000000000000..ab74bccd4a5b5cae639d1aef8ed9673512b7ecb5
--- /dev/null
+++ b/drivers/reset/reset-qcom-pdc.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+#define RPMH_PDC_SYNC_RESET 0x100
+
+struct qcom_pdc_reset_map {
+ u8 bit;
+};
+
+struct qcom_pdc_reset_data {
+ struct reset_controller_dev rcdev;
+ struct regmap *regmap;
+};
+
+static const struct regmap_config sdm845_pdc_regmap_config = {
+ .name = "pdc-reset",
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x20000,
+ .fast_io = true,
+};
+
+static const struct qcom_pdc_reset_map sdm845_pdc_resets[] = {
+ [PDC_APPS_SYNC_RESET] = {0},
+ [PDC_SP_SYNC_RESET] = {1},
+ [PDC_AUDIO_SYNC_RESET] = {2},
+ [PDC_SENSORS_SYNC_RESET] = {3},
+ [PDC_AOP_SYNC_RESET] = {4},
+ [PDC_DEBUG_SYNC_RESET] = {5},
+ [PDC_GPU_SYNC_RESET] = {6},
+ [PDC_DISPLAY_SYNC_RESET] = {7},
+ [PDC_COMPUTE_SYNC_RESET] = {8},
+ [PDC_MODEM_SYNC_RESET] = {9},
+};
+
+static inline struct qcom_pdc_reset_data *to_qcom_pdc_reset_data(
+ struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct qcom_pdc_reset_data, rcdev);
+}
+
+static int qcom_pdc_control_assert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
+
+ return regmap_update_bits(data->regmap, RPMH_PDC_SYNC_RESET,
+ BIT(sdm845_pdc_resets[idx].bit),
+ BIT(sdm845_pdc_resets[idx].bit));
+}
+
+static int qcom_pdc_control_deassert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev);
+
+ return regmap_update_bits(data->regmap, RPMH_PDC_SYNC_RESET,
+ BIT(sdm845_pdc_resets[idx].bit), 0);
+}
+
+static const struct reset_control_ops qcom_pdc_reset_ops = {
+ .assert = qcom_pdc_control_assert,
+ .deassert = qcom_pdc_control_deassert,
+};
+
+static int qcom_pdc_reset_probe(struct platform_device *pdev)
+{
+ struct qcom_pdc_reset_data *data;
+ struct device *dev = &pdev->dev;
+ void __iomem *base;
+ struct resource *res;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ data->regmap = devm_regmap_init_mmio(dev, base,
+ &sdm845_pdc_regmap_config);
+ if (IS_ERR(data->regmap)) {
+ dev_err(dev, "Unable to initialize regmap\n");
+ return PTR_ERR(data->regmap);
+ }
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.ops = &qcom_pdc_reset_ops;
+ data->rcdev.nr_resets = ARRAY_SIZE(sdm845_pdc_resets);
+ data->rcdev.of_node = dev->of_node;
+
+ return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static const struct of_device_id qcom_pdc_reset_of_match[] = {
+ { .compatible = "qcom,sdm845-pdc-global" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qcom_pdc_reset_of_match);
+
+static struct platform_driver qcom_pdc_reset_driver = {
+ .probe = qcom_pdc_reset_probe,
+ .driver = {
+ .name = "qcom_pdc_reset",
+ .of_match_table = qcom_pdc_reset_of_match,
+ },
+};
+module_platform_driver(qcom_pdc_reset_driver);
+
+MODULE_DESCRIPTION("Qualcomm PDC Reset Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 113e884697fd8c3478d9b7900a79360fb3fad2f5..446166ba0bec43e65d3f041bf16244ebf3d98330 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -18,7 +18,7 @@ obj-y += qcom/
obj-y += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_SOC_SAMSUNG) += samsung/
-obj-$(CONFIG_ARCH_SUNXI) += sunxi/
+obj-y += sunxi/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_SOC_TI) += ti/
obj-$(CONFIG_ARCH_U8500) += ux500/
diff --git a/drivers/soc/actions/Kconfig b/drivers/soc/actions/Kconfig
index 9d68b5a771c330ff1107eee5abdb7f8ebebf5bb9..1a0b9649efb4cbb7e722896aff18ba65b21c7b65 100644
--- a/drivers/soc/actions/Kconfig
+++ b/drivers/soc/actions/Kconfig
@@ -10,7 +10,7 @@ config OWL_PM_DOMAINS
select PM_GENERIC_DOMAINS
help
Say 'y' here to enable support for Smart Power System (SPS)
- power-gating on Actions Semiconductor S500 SoC.
+ power-gating on Actions Semiconductor S500, S700 and S900 SoCs.
If unsure, say 'n'.
endif
diff --git a/drivers/soc/actions/Makefile b/drivers/soc/actions/Makefile
index 1e101b06bab1e22ba838933870459f81627a4f66..4db9e7b050e5d9eaf1ee63f2e31282cdd8432cbc 100644
--- a/drivers/soc/actions/Makefile
+++ b/drivers/soc/actions/Makefile
@@ -1,2 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+
obj-$(CONFIG_OWL_PM_DOMAINS_HELPER) += owl-sps-helper.o
obj-$(CONFIG_OWL_PM_DOMAINS) += owl-sps.o
diff --git a/drivers/soc/actions/owl-sps-helper.c b/drivers/soc/actions/owl-sps-helper.c
index 9d7a2c2b44ec804a15eea28e2526eea3443b6c45..291a206d6f04aaeb9c1bf247a39560e931816859 100644
--- a/drivers/soc/actions/owl-sps-helper.c
+++ b/drivers/soc/actions/owl-sps-helper.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Actions Semi Owl Smart Power System (SPS) shared helpers
*
@@ -5,11 +6,6 @@
* Author: Actions Semi, Inc.
*
* Copyright (c) 2017 Andreas Färber
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
*/
#include <linux/delay.h>
diff --git a/drivers/soc/actions/owl-sps.c b/drivers/soc/actions/owl-sps.c
index 032921d8d41f3cf67ccb66ddfa9c65dc4dff1e64..73a9e0bb7e8ed98c651f63a559bdce95893903e5 100644
--- a/drivers/soc/actions/owl-sps.c
+++ b/drivers/soc/actions/owl-sps.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Actions Semi Owl Smart Power System (SPS)
*
@@ -5,11 +6,6 @@
* Author: Actions Semi, Inc.
*
* Copyright (c) 2017 Andreas Färber
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
*/
#include <linux/of_address.h>
@@ -18,6 +14,7 @@
#include <linux/soc/actions/owl-sps.h>
#include <dt-bindings/power/owl-s500-powergate.h>
#include <dt-bindings/power/owl-s700-powergate.h>
+#include <dt-bindings/power/owl-s900-powergate.h>
struct owl_sps_domain_info {
const char *name;
@@ -244,9 +241,66 @@ static const struct owl_sps_info s700_sps_info = {
.domains = s700_sps_domains,
};
+static const struct owl_sps_domain_info s900_sps_domains[] = {
+ [S900_PD_GPU_B] = {
+ .name = "GPU_B",
+ .pwr_bit = 3,
+ },
+ [S900_PD_VCE] = {
+ .name = "VCE",
+ .pwr_bit = 4,
+ },
+ [S900_PD_SENSOR] = {
+ .name = "SENSOR",
+ .pwr_bit = 5,
+ },
+ [S900_PD_VDE] = {
+ .name = "VDE",
+ .pwr_bit = 6,
+ },
+ [S900_PD_HDE] = {
+ .name = "HDE",
+ .pwr_bit = 7,
+ },
+ [S900_PD_USB3] = {
+ .name = "USB3",
+ .pwr_bit = 8,
+ },
+ [S900_PD_DDR0] = {
+ .name = "DDR0",
+ .pwr_bit = 9,
+ },
+ [S900_PD_DDR1] = {
+ .name = "DDR1",
+ .pwr_bit = 10,
+ },
+ [S900_PD_DE] = {
+ .name = "DE",
+ .pwr_bit = 13,
+ },
+ [S900_PD_NAND] = {
+ .name = "NAND",
+ .pwr_bit = 14,
+ },
+ [S900_PD_USB2_H0] = {
+ .name = "USB2_H0",
+ .pwr_bit = 15,
+ },
+ [S900_PD_USB2_H1] = {
+ .name = "USB2_H1",
+ .pwr_bit = 16,
+ },
+};
+
+static const struct owl_sps_info s900_sps_info = {
+ .num_domains = ARRAY_SIZE(s900_sps_domains),
+ .domains = s900_sps_domains,
+};
+
static const struct of_device_id owl_sps_of_matches[] = {
{ .compatible = "actions,s500-sps", .data = &s500_sps_info },
{ .compatible = "actions,s700-sps", .data = &s700_sps_info },
+ { .compatible = "actions,s900-sps", .data = &s900_sps_info },
{ }
};
diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
index b04f6e4aedbc1ea32c2717af5555293e865fece6..2f282b47291205a8a4304e0e74d07feda4459c8b 100644
--- a/drivers/soc/amlogic/Kconfig
+++ b/drivers/soc/amlogic/Kconfig
@@ -1,5 +1,12 @@
menu "Amlogic SoC drivers"
+config MESON_CANVAS
+ tristate "Amlogic Meson Canvas driver"
+ depends on ARCH_MESON || COMPILE_TEST
+ default n
+ help
+ Say yes to support the canvas IP for Amlogic SoCs.
+
config MESON_GX_SOCINFO
bool "Amlogic Meson GX SoC Information driver"
depends on ARCH_MESON || COMPILE_TEST
diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
index 8fa321893928de7329173cd6651baac2f3f1a4da..0ab16d35ac36dfc9cd8af43c29f62cc3aceac279 100644
--- a/drivers/soc/amlogic/Makefile
+++ b/drivers/soc/amlogic/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_MESON_CANVAS) += meson-canvas.o
obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
diff --git a/drivers/soc/amlogic/meson-canvas.c b/drivers/soc/amlogic/meson-canvas.c
new file mode 100644
index 0000000000000000000000000000000000000000..fce33ca76bb6285d94e2c838bf8aa560f2cbb04e
--- /dev/null
+++ b/drivers/soc/amlogic/meson-canvas.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 BayLibre, SAS
+ * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
+ * Copyright (C) 2014 Endless Mobile
+ */
+
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/soc/amlogic/meson-canvas.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+
+#define NUM_CANVAS 256
+
+/* DMC Registers */
+#define DMC_CAV_LUT_DATAL 0x00
+ #define CANVAS_WIDTH_LBIT 29
+ #define CANVAS_WIDTH_LWID 3
+#define DMC_CAV_LUT_DATAH 0x04
+ #define CANVAS_WIDTH_HBIT 0
+ #define CANVAS_HEIGHT_BIT 9
+ #define CANVAS_WRAP_BIT 22
+ #define CANVAS_BLKMODE_BIT 24
+ #define CANVAS_ENDIAN_BIT 26
+#define DMC_CAV_LUT_ADDR 0x08
+ #define CANVAS_LUT_WR_EN BIT(9)
+ #define CANVAS_LUT_RD_EN BIT(8)
+
+struct meson_canvas {
+ struct device *dev;
+ void __iomem *reg_base;
+ spinlock_t lock; /* canvas device lock */
+ u8 used[NUM_CANVAS];
+};
+
+static void canvas_write(struct meson_canvas *canvas, u32 reg, u32 val)
+{
+ writel_relaxed(val, canvas->reg_base + reg);
+}
+
+static u32 canvas_read(struct meson_canvas *canvas, u32 reg)
+{
+ return readl_relaxed(canvas->reg_base + reg);
+}
+
+struct meson_canvas *meson_canvas_get(struct device *dev)
+{
+ struct device_node *canvas_node;
+ struct platform_device *canvas_pdev;
+
+ canvas_node = of_parse_phandle(dev->of_node, "amlogic,canvas", 0);
+ if (!canvas_node)
+ return ERR_PTR(-ENODEV);
+
+ canvas_pdev = of_find_device_by_node(canvas_node);
+ if (!canvas_pdev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ return dev_get_drvdata(&canvas_pdev->dev);
+}
+EXPORT_SYMBOL_GPL(meson_canvas_get);
+
+int meson_canvas_config(struct meson_canvas *canvas, u8 canvas_index,
+ u32 addr, u32 stride, u32 height,
+ unsigned int wrap,
+ unsigned int blkmode,
+ unsigned int endian)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&canvas->lock, flags);
+ if (!canvas->used[canvas_index]) {
+ dev_err(canvas->dev,
+ "Trying to setup non allocated canvas %u\n",
+ canvas_index);
+ spin_unlock_irqrestore(&canvas->lock, flags);
+ return -EINVAL;
+ }
+
+ canvas_write(canvas, DMC_CAV_LUT_DATAL,
+ ((addr + 7) >> 3) |
+ (((stride + 7) >> 3) << CANVAS_WIDTH_LBIT));
+
+ canvas_write(canvas, DMC_CAV_LUT_DATAH,
+ ((((stride + 7) >> 3) >> CANVAS_WIDTH_LWID) <<
+ CANVAS_WIDTH_HBIT) |
+ (height << CANVAS_HEIGHT_BIT) |
+ (wrap << CANVAS_WRAP_BIT) |
+ (blkmode << CANVAS_BLKMODE_BIT) |
+ (endian << CANVAS_ENDIAN_BIT));
+
+ canvas_write(canvas, DMC_CAV_LUT_ADDR,
+ CANVAS_LUT_WR_EN | canvas_index);
+
+ /* Force a read-back to make sure everything is flushed. */
+ canvas_read(canvas, DMC_CAV_LUT_DATAH);
+ spin_unlock_irqrestore(&canvas->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(meson_canvas_config);
+
+int meson_canvas_alloc(struct meson_canvas *canvas, u8 *canvas_index)
+{
+ int i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&canvas->lock, flags);
+ for (i = 0; i < NUM_CANVAS; ++i) {
+ if (!canvas->used[i]) {
+ canvas->used[i] = 1;
+ spin_unlock_irqrestore(&canvas->lock, flags);
+ *canvas_index = i;
+ return 0;
+ }
+ }
+ spin_unlock_irqrestore(&canvas->lock, flags);
+
+ dev_err(canvas->dev, "No more canvas available\n");
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(meson_canvas_alloc);
+
+int meson_canvas_free(struct meson_canvas *canvas, u8 canvas_index)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&canvas->lock, flags);
+ if (!canvas->used[canvas_index]) {
+ dev_err(canvas->dev,
+ "Trying to free unused canvas %u\n", canvas_index);
+ spin_unlock_irqrestore(&canvas->lock, flags);
+ return -EINVAL;
+ }
+ canvas->used[canvas_index] = 0;
+ spin_unlock_irqrestore(&canvas->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(meson_canvas_free);
+
+static int meson_canvas_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct meson_canvas *canvas;
+ struct device *dev = &pdev->dev;
+
+ canvas = devm_kzalloc(dev, sizeof(*canvas), GFP_KERNEL);
+ if (!canvas)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ canvas->reg_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(canvas->reg_base))
+ return PTR_ERR(canvas->reg_base);
+
+ canvas->dev = dev;
+ spin_lock_init(&canvas->lock);
+ dev_set_drvdata(dev, canvas);
+
+ return 0;
+}
+
+static const struct of_device_id canvas_dt_match[] = {
+ { .compatible = "amlogic,canvas" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, canvas_dt_match);
+
+static struct platform_driver meson_canvas_driver = {
+ .probe = meson_canvas_probe,
+ .driver = {
+ .name = "amlogic-canvas",
+ .of_match_table = canvas_dt_match,
+ },
+};
+module_platform_driver(meson_canvas_driver);
+
+MODULE_DESCRIPTION("Amlogic Canvas driver");
+MODULE_AUTHOR("Maxime Jourdan <mjourdan@baylibre.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/fsl/dpio/dpio-driver.c b/drivers/soc/fsl/dpio/dpio-driver.c
index b60b77bfaffae1d04d5975b1d5fd288a930f7caa..e58fcc9096e82f7527d0293942b2c77d6a0e9b97 100644
--- a/drivers/soc/fsl/dpio/dpio-driver.c
+++ b/drivers/soc/fsl/dpio/dpio-driver.c
@@ -50,13 +50,10 @@ static void unregister_dpio_irq_handlers(struct fsl_mc_device *dpio_dev)
static int register_dpio_irq_handlers(struct fsl_mc_device *dpio_dev, int cpu)
{
- struct dpio_priv *priv;
int error;
struct fsl_mc_device_irq *irq;
cpumask_t mask;
- priv = dev_get_drvdata(&dpio_dev->dev);
-
irq = dpio_dev->irqs[0];
error = devm_request_irq(&dpio_dev->dev,
irq->msi_desc->irq,
diff --git a/drivers/soc/fsl/qbman/Kconfig b/drivers/soc/fsl/qbman/Kconfig
index d570cb5fd381964176611eff2dc144295e469354..b0943e5417960ceb4dc0b7d51e52899c6791ff67 100644
--- a/drivers/soc/fsl/qbman/Kconfig
+++ b/drivers/soc/fsl/qbman/Kconfig
@@ -1,6 +1,6 @@
menuconfig FSL_DPAA
bool "QorIQ DPAA1 framework support"
- depends on (FSL_SOC_BOOKE || ARCH_LAYERSCAPE)
+ depends on ((FSL_SOC_BOOKE || ARCH_LAYERSCAPE) && ARCH_DMA_ADDR_T_64BIT)
select GENERIC_ALLOCATOR
help
The Freescale Data Path Acceleration Architecture (DPAA) is a set of
diff --git a/drivers/soc/fsl/qbman/bman.c b/drivers/soc/fsl/qbman/bman.c
index f9485cedc648f70380944f904f1ee15563c697f7..f84ab596bde8c3b43920a6c1c3d54620f4d6132b 100644
--- a/drivers/soc/fsl/qbman/bman.c
+++ b/drivers/soc/fsl/qbman/bman.c
@@ -562,11 +562,9 @@ static int bman_create_portal(struct bman_portal *portal,
dev_err(c->dev, "request_irq() failed\n");
goto fail_irq;
}
- if (c->cpu != -1 && irq_can_set_affinity(c->irq) &&
- irq_set_affinity(c->irq, cpumask_of(c->cpu))) {
- dev_err(c->dev, "irq_set_affinity() failed\n");
+
+ if (dpaa_set_portal_irq_affinity(c->dev, c->irq, c->cpu))
goto fail_affinity;
- }
/* Need RCR to be empty before continuing */
ret = bm_rcr_get_fill(p);
diff --git a/drivers/soc/fsl/qbman/bman_portal.c b/drivers/soc/fsl/qbman/bman_portal.c
index 2f71f7df3465a0a65301cb031ab183c4b0ddee7c..2c95cf59f3e7c55372cf4d57de0bb3480a61326b 100644
--- a/drivers/soc/fsl/qbman/bman_portal.c
+++ b/drivers/soc/fsl/qbman/bman_portal.c
@@ -65,7 +65,9 @@ static int bman_offline_cpu(unsigned int cpu)
if (!pcfg)
return 0;
- irq_set_affinity(pcfg->irq, cpumask_of(0));
+ /* use any other online CPU */
+ cpu = cpumask_any_but(cpu_online_mask, cpu);
+ irq_set_affinity(pcfg->irq, cpumask_of(cpu));
return 0;
}
@@ -91,7 +93,15 @@ static int bman_portal_probe(struct platform_device *pdev)
struct device_node *node = dev->of_node;
struct bm_portal_config *pcfg;
struct resource *addr_phys[2];
- int irq, cpu;
+ int irq, cpu, err;
+
+ err = bman_is_probed();
+ if (!err)
+ return -EPROBE_DEFER;
+ if (err < 0) {
+ dev_err(&pdev->dev, "failing probe due to bman probe error\n");
+ return -ENODEV;
+ }
pcfg = devm_kmalloc(dev, sizeof(*pcfg), GFP_KERNEL);
if (!pcfg)
diff --git a/drivers/soc/fsl/qbman/dpaa_sys.h b/drivers/soc/fsl/qbman/dpaa_sys.h
index 9f379000da85aa1dc23bbc48ed7775ce0939c14b..ae8afa552b1ef47e629de1eae4f324dc8b0af181 100644
--- a/drivers/soc/fsl/qbman/dpaa_sys.h
+++ b/drivers/soc/fsl/qbman/dpaa_sys.h
@@ -111,4 +111,24 @@ int qbman_init_private_mem(struct device *dev, int idx, dma_addr_t *addr,
#define QBMAN_MEMREMAP_ATTR MEMREMAP_WC
#endif
+static inline int dpaa_set_portal_irq_affinity(struct device *dev,
+ int irq, int cpu)
+{
+ int ret = 0;
+
+ if (!irq_can_set_affinity(irq)) {
+ dev_err(dev, "unable to set IRQ affinity\n");
+ return -EINVAL;
+ }
+
+ if (cpu == -1 || !cpu_online(cpu))
+ cpu = cpumask_any(cpu_online_mask);
+
+ ret = irq_set_affinity(irq, cpumask_of(cpu));
+ if (ret)
+ dev_err(dev, "irq_set_affinity() on CPU %d failed\n", cpu);
+
+ return ret;
+}
+
#endif /* __DPAA_SYS_H */
diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c
index 8cc0151830433230e8f629c2660eec90871b7e8c..5ce24718c2fd1aa37ef0206a12a102025a987b7d 100644
--- a/drivers/soc/fsl/qbman/qman.c
+++ b/drivers/soc/fsl/qbman/qman.c
@@ -850,12 +850,24 @@ static inline void qm_mr_set_ithresh(struct qm_portal *portal, u8 ithresh)
static inline int qm_mc_init(struct qm_portal *portal)
{
+ u8 rr0, rr1;
struct qm_mc *mc = &portal->mc;
mc->cr = portal->addr.ce + QM_CL_CR;
mc->rr = portal->addr.ce + QM_CL_RR0;
- mc->rridx = (mc->cr->_ncw_verb & QM_MCC_VERB_VBIT)
- ? 0 : 1;
+ /*
+ * The expected valid bit polarity for the next CR command is 0
+ * if RR1 contains a valid response, and is 1 if RR0 contains a
+ * valid response. If both RR contain all 0, this indicates either
+ * that no command has been executed since reset (in which case the
+ * expected valid bit polarity is 1)
+ */
+ rr0 = mc->rr->verb;
+ rr1 = (mc->rr+1)->verb;
+ if ((rr0 == 0 && rr1 == 0) || rr0 != 0)
+ mc->rridx = 1;
+ else
+ mc->rridx = 0;
mc->vbit = mc->rridx ? QM_MCC_VERB_VBIT : 0;
#ifdef CONFIG_FSL_DPAA_CHECKING
mc->state = qman_mc_idle;
@@ -1000,6 +1012,37 @@ static inline void put_affine_portal(void)
static struct workqueue_struct *qm_portal_wq;
+void qman_dqrr_set_ithresh(struct qman_portal *portal, u8 ithresh)
+{
+ if (!portal)
+ return;
+
+ qm_dqrr_set_ithresh(&portal->p, ithresh);
+ portal->p.dqrr.ithresh = ithresh;
+}
+EXPORT_SYMBOL(qman_dqrr_set_ithresh);
+
+void qman_dqrr_get_ithresh(struct qman_portal *portal, u8 *ithresh)
+{
+ if (portal && ithresh)
+ *ithresh = portal->p.dqrr.ithresh;
+}
+EXPORT_SYMBOL(qman_dqrr_get_ithresh);
+
+void qman_portal_get_iperiod(struct qman_portal *portal, u32 *iperiod)
+{
+ if (portal && iperiod)
+ *iperiod = qm_in(&portal->p, QM_REG_ITPR);
+}
+EXPORT_SYMBOL(qman_portal_get_iperiod);
+
+void qman_portal_set_iperiod(struct qman_portal *portal, u32 iperiod)
+{
+ if (portal)
+ qm_out(&portal->p, QM_REG_ITPR, iperiod);
+}
+EXPORT_SYMBOL(qman_portal_set_iperiod);
+
int qman_wq_alloc(void)
{
qm_portal_wq = alloc_workqueue("qman_portal_wq", 0, 1);
@@ -1210,11 +1253,9 @@ static int qman_create_portal(struct qman_portal *portal,
dev_err(c->dev, "request_irq() failed\n");
goto fail_irq;
}
- if (c->cpu != -1 && irq_can_set_affinity(c->irq) &&
- irq_set_affinity(c->irq, cpumask_of(c->cpu))) {
- dev_err(c->dev, "irq_set_affinity() failed\n");
+
+ if (dpaa_set_portal_irq_affinity(c->dev, c->irq, c->cpu))
goto fail_affinity;
- }
/* Need EQCR to be empty before continuing */
isdr &= ~QM_PIRQ_EQCI;
diff --git a/drivers/soc/fsl/qbman/qman_portal.c b/drivers/soc/fsl/qbman/qman_portal.c
index 3e9391d117c543cb46f49893610e528ed52984e8..661c9b234d32bc04da676e54e5568c0a10e3a0b4 100644
--- a/drivers/soc/fsl/qbman/qman_portal.c
+++ b/drivers/soc/fsl/qbman/qman_portal.c
@@ -195,8 +195,10 @@ static int qman_offline_cpu(unsigned int cpu)
if (p) {
pcfg = qman_get_qm_portal_config(p);
if (pcfg) {
- irq_set_affinity(pcfg->irq, cpumask_of(0));
- qman_portal_update_sdest(pcfg, 0);
+ /* select any other online CPU */
+ cpu = cpumask_any_but(cpu_online_mask, cpu);
+ irq_set_affinity(pcfg->irq, cpumask_of(cpu));
+ qman_portal_update_sdest(pcfg, cpu);
}
}
return 0;
diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c
index 2ef6fc6487c113f8cb33aade2fa4f3d1d30f5454..612d9c551be5de8ba27dea64f9fb30705964ed83 100644
--- a/drivers/soc/fsl/qe/qe.c
+++ b/drivers/soc/fsl/qe/qe.c
@@ -588,11 +588,7 @@ struct qe_firmware_info *qe_get_firmware_info(void)
}
/* Find the 'firmware' child node */
- for_each_child_of_node(qe, fw) {
- if (strcmp(fw->name, "firmware") == 0)
- break;
- }
-
+ fw = of_get_child_by_name(qe, "firmware");
of_node_put(qe);
/* Did we find the 'firmware' node? */
diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c
index b3da635970ea70f56d98a4db94d234178cfa9a82..aa3729ecaa9ef86291ab685e2a5beafa6371e972 100644
--- a/drivers/soc/imx/gpc.c
+++ b/drivers/soc/imx/gpc.c
@@ -1,13 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2015-2017 Pengutronix, Lucas Stach <kernel@pengutronix.de>
* Copyright 2011-2013 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/clk.h>
@@ -69,7 +63,7 @@ static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd)
u32 val;
/* Read ISO and ISO2SW power down delays */
- regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val);
+ regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PDNSCR_OFFS, &val);
iso = val & 0x3f;
iso2sw = (val >> 8) & 0x3f;
@@ -247,6 +241,7 @@ builtin_platform_driver(imx_pgc_power_domain_driver)
#define GPC_PGC_DOMAIN_ARM 0
#define GPC_PGC_DOMAIN_PU 1
#define GPC_PGC_DOMAIN_DISPLAY 2
+#define GPC_PGC_DOMAIN_PCI 3
static struct genpd_power_state imx6_pm_domain_pu_state = {
.power_off_latency_ns = 25000,
@@ -254,12 +249,13 @@ static struct genpd_power_state imx6_pm_domain_pu_state = {
};
static struct imx_pm_domain imx_gpc_domains[] = {
- {
+ [GPC_PGC_DOMAIN_ARM] {
.base = {
.name = "ARM",
.flags = GENPD_FLAG_ALWAYS_ON,
},
- }, {
+ },
+ [GPC_PGC_DOMAIN_PU] {
.base = {
.name = "PU",
.power_off = imx6_pm_domain_power_off,
@@ -269,7 +265,8 @@ static struct imx_pm_domain imx_gpc_domains[] = {
},
.reg_offs = 0x260,
.cntr_pdn_bit = 0,
- }, {
+ },
+ [GPC_PGC_DOMAIN_DISPLAY] {
.base = {
.name = "DISPLAY",
.power_off = imx6_pm_domain_power_off,
@@ -277,7 +274,8 @@ static struct imx_pm_domain imx_gpc_domains[] = {
},
.reg_offs = 0x240,
.cntr_pdn_bit = 4,
- }, {
+ },
+ [GPC_PGC_DOMAIN_PCI] {
.base = {
.name = "PCI",
.power_off = imx6_pm_domain_power_off,
@@ -348,8 +346,8 @@ static const struct regmap_config imx_gpc_regmap_config = {
};
static struct generic_pm_domain *imx_gpc_onecell_domains[] = {
- &imx_gpc_domains[0].base,
- &imx_gpc_domains[1].base,
+ &imx_gpc_domains[GPC_PGC_DOMAIN_ARM].base,
+ &imx_gpc_domains[GPC_PGC_DOMAIN_PU].base,
};
static struct genpd_onecell_data imx_gpc_onecell_data = {
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 6ef18cf8f24387e324cf455ae98c30f2b27c95d3..e7b5994fee9d0b4d1f1908509b5b49ecfea453a7 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017 Impinj, Inc
* Author: Andrey Smirnov <andrew.smirnov@gmail.com>
@@ -5,29 +6,23 @@
* Based on the code of analogus driver:
*
* Copyright 2015-2017 Pengutronix, Lucas Stach <kernel@pengutronix.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <dt-bindings/power/imx7-power.h>
-#define GPC_LPCR_A7_BSC 0x000
+#define GPC_LPCR_A_CORE_BSC 0x000
#define GPC_PGC_CPU_MAPPING 0x0ec
-#define USB_HSIC_PHY_A7_DOMAIN BIT(6)
-#define USB_OTG2_PHY_A7_DOMAIN BIT(5)
-#define USB_OTG1_PHY_A7_DOMAIN BIT(4)
-#define PCIE_PHY_A7_DOMAIN BIT(3)
-#define MIPI_PHY_A7_DOMAIN BIT(2)
+#define USB_HSIC_PHY_A_CORE_DOMAIN BIT(6)
+#define USB_OTG2_PHY_A_CORE_DOMAIN BIT(5)
+#define USB_OTG1_PHY_A_CORE_DOMAIN BIT(4)
+#define PCIE_PHY_A_CORE_DOMAIN BIT(3)
+#define MIPI_PHY_A_CORE_DOMAIN BIT(2)
#define GPC_PU_PGC_SW_PUP_REQ 0x0f8
#define GPC_PU_PGC_SW_PDN_REQ 0x104
@@ -53,7 +48,7 @@
#define GPC_PGC_CTRL_PCR BIT(0)
-struct imx7_pgc_domain {
+struct imx_pgc_domain {
struct generic_pm_domain genpd;
struct regmap *regmap;
struct regulator *regulator;
@@ -69,11 +64,16 @@ struct imx7_pgc_domain {
struct device *dev;
};
-static int imx7_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
+struct imx_pgc_domain_data {
+ const struct imx_pgc_domain *domains;
+ size_t domains_num;
+};
+
+static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
bool on)
{
- struct imx7_pgc_domain *domain = container_of(genpd,
- struct imx7_pgc_domain,
+ struct imx_pgc_domain *domain = container_of(genpd,
+ struct imx_pgc_domain,
genpd);
unsigned int offset = on ?
GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ;
@@ -150,24 +150,24 @@ static int imx7_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
return ret;
}
-static int imx7_gpc_pu_pgc_sw_pup_req(struct generic_pm_domain *genpd)
+static int imx_gpc_pu_pgc_sw_pup_req(struct generic_pm_domain *genpd)
{
- return imx7_gpc_pu_pgc_sw_pxx_req(genpd, true);
+ return imx_gpc_pu_pgc_sw_pxx_req(genpd, true);
}
-static int imx7_gpc_pu_pgc_sw_pdn_req(struct generic_pm_domain *genpd)
+static int imx_gpc_pu_pgc_sw_pdn_req(struct generic_pm_domain *genpd)
{
- return imx7_gpc_pu_pgc_sw_pxx_req(genpd, false);
+ return imx_gpc_pu_pgc_sw_pxx_req(genpd, false);
}
-static const struct imx7_pgc_domain imx7_pgc_domains[] = {
+static const struct imx_pgc_domain imx7_pgc_domains[] = {
[IMX7_POWER_DOMAIN_MIPI_PHY] = {
.genpd = {
.name = "mipi-phy",
},
.bits = {
.pxx = MIPI_PHY_SW_Pxx_REQ,
- .map = MIPI_PHY_A7_DOMAIN,
+ .map = MIPI_PHY_A_CORE_DOMAIN,
},
.voltage = 1000000,
.pgc = PGC_MIPI,
@@ -179,7 +179,7 @@ static const struct imx7_pgc_domain imx7_pgc_domains[] = {
},
.bits = {
.pxx = PCIE_PHY_SW_Pxx_REQ,
- .map = PCIE_PHY_A7_DOMAIN,
+ .map = PCIE_PHY_A_CORE_DOMAIN,
},
.voltage = 1000000,
.pgc = PGC_PCIE,
@@ -191,16 +191,21 @@ static const struct imx7_pgc_domain imx7_pgc_domains[] = {
},
.bits = {
.pxx = USB_HSIC_PHY_SW_Pxx_REQ,
- .map = USB_HSIC_PHY_A7_DOMAIN,
+ .map = USB_HSIC_PHY_A_CORE_DOMAIN,
},
.voltage = 1200000,
.pgc = PGC_USB_HSIC,
},
};
-static int imx7_pgc_domain_probe(struct platform_device *pdev)
+static const struct imx_pgc_domain_data imx7_pgc_domain_data = {
+ .domains = imx7_pgc_domains,
+ .domains_num = ARRAY_SIZE(imx7_pgc_domains),
+};
+
+static int imx_pgc_domain_probe(struct platform_device *pdev)
{
- struct imx7_pgc_domain *domain = pdev->dev.platform_data;
+ struct imx_pgc_domain *domain = pdev->dev.platform_data;
int ret;
domain->dev = &pdev->dev;
@@ -233,9 +238,9 @@ static int imx7_pgc_domain_probe(struct platform_device *pdev)
return ret;
}
-static int imx7_pgc_domain_remove(struct platform_device *pdev)
+static int imx_pgc_domain_remove(struct platform_device *pdev)
{
- struct imx7_pgc_domain *domain = pdev->dev.platform_data;
+ struct imx_pgc_domain *domain = pdev->dev.platform_data;
of_genpd_del_provider(domain->dev->of_node);
pm_genpd_remove(&domain->genpd);
@@ -243,25 +248,26 @@ static int imx7_pgc_domain_remove(struct platform_device *pdev)
return 0;
}
-static const struct platform_device_id imx7_pgc_domain_id[] = {
- { "imx7-pgc-domain", },
+static const struct platform_device_id imx_pgc_domain_id[] = {
+ { "imx-pgc-domain", },
{ },
};
-static struct platform_driver imx7_pgc_domain_driver = {
+static struct platform_driver imx_pgc_domain_driver = {
.driver = {
- .name = "imx7-pgc",
+ .name = "imx-pgc",
},
- .probe = imx7_pgc_domain_probe,
- .remove = imx7_pgc_domain_remove,
- .id_table = imx7_pgc_domain_id,
+ .probe = imx_pgc_domain_probe,
+ .remove = imx_pgc_domain_remove,
+ .id_table = imx_pgc_domain_id,
};
-builtin_platform_driver(imx7_pgc_domain_driver)
+builtin_platform_driver(imx_pgc_domain_driver)
static int imx_gpcv2_probe(struct platform_device *pdev)
{
+ static const struct imx_pgc_domain_data *domain_data;
static const struct regmap_range yes_ranges[] = {
- regmap_reg_range(GPC_LPCR_A7_BSC,
+ regmap_reg_range(GPC_LPCR_A_CORE_BSC,
GPC_M4_PU_PDN_FLG),
regmap_reg_range(GPC_PGC_CTRL(PGC_MIPI),
GPC_PGC_SR(PGC_MIPI)),
@@ -307,9 +313,11 @@ static int imx_gpcv2_probe(struct platform_device *pdev)
return ret;
}
+ domain_data = of_device_get_match_data(&pdev->dev);
+
for_each_child_of_node(pgc_np, np) {
struct platform_device *pd_pdev;
- struct imx7_pgc_domain *domain;
+ struct imx_pgc_domain *domain;
u32 domain_index;
ret = of_property_read_u32(np, "reg", &domain_index);
@@ -319,14 +327,14 @@ static int imx_gpcv2_probe(struct platform_device *pdev)
return ret;
}
- if (domain_index >= ARRAY_SIZE(imx7_pgc_domains)) {
+ if (domain_index >= domain_data->domains_num) {
dev_warn(dev,
"Domain index %d is out of bounds\n",
domain_index);
continue;
}
- pd_pdev = platform_device_alloc("imx7-pgc-domain",
+ pd_pdev = platform_device_alloc("imx-pgc-domain",
domain_index);
if (!pd_pdev) {
dev_err(dev, "Failed to allocate platform device\n");
@@ -335,8 +343,8 @@ static int imx_gpcv2_probe(struct platform_device *pdev)
}
ret = platform_device_add_data(pd_pdev,
- &imx7_pgc_domains[domain_index],
- sizeof(imx7_pgc_domains[domain_index]));
+ &domain_data->domains[domain_index],
+ sizeof(domain_data->domains[domain_index]));
if (ret) {
platform_device_put(pd_pdev);
of_node_put(np);
@@ -345,8 +353,8 @@ static int imx_gpcv2_probe(struct platform_device *pdev)
domain = pd_pdev->dev.platform_data;
domain->regmap = regmap;
- domain->genpd.power_on = imx7_gpc_pu_pgc_sw_pup_req;
- domain->genpd.power_off = imx7_gpc_pu_pgc_sw_pdn_req;
+ domain->genpd.power_on = imx_gpc_pu_pgc_sw_pup_req;
+ domain->genpd.power_off = imx_gpc_pu_pgc_sw_pdn_req;
pd_pdev->dev.parent = dev;
pd_pdev->dev.of_node = np;
@@ -363,7 +371,7 @@ static int imx_gpcv2_probe(struct platform_device *pdev)
}
static const struct of_device_id imx_gpcv2_dt_ids[] = {
- { .compatible = "fsl,imx7d-gpc" },
+ { .compatible = "fsl,imx7d-gpc", .data = &imx7_pgc_domain_data, },
{ }
};
diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index 4e931fdf4d0918aa59368390ed7d8dc8c194b26c..8236a6c87e19f0bcd3f066b409307a844c2f1e61 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -76,6 +76,13 @@
#define PWRAP_SLV_CAP_SECURITY BIT(2)
#define HAS_CAP(_c, _x) (((_c) & (_x)) == (_x))
+/* Group of bits used for shown pwrap capability */
+#define PWRAP_CAP_BRIDGE BIT(0)
+#define PWRAP_CAP_RESET BIT(1)
+#define PWRAP_CAP_DCM BIT(2)
+#define PWRAP_CAP_INT1_EN BIT(3)
+#define PWRAP_CAP_WDT_SRC1 BIT(4)
+
/* defines for slave device wrapper registers */
enum dew_regs {
PWRAP_DEW_BASE,
@@ -91,6 +98,27 @@ enum dew_regs {
PWRAP_DEW_CIPHER_MODE,
PWRAP_DEW_CIPHER_SWRST,
+ /* MT6323 only regs */
+ PWRAP_DEW_CIPHER_EN,
+ PWRAP_DEW_RDDMY_NO,
+
+ /* MT6358 only regs */
+ PWRAP_SMT_CON1,
+ PWRAP_DRV_CON1,
+ PWRAP_FILTER_CON0,
+ PWRAP_GPIO_PULLEN0_CLR,
+ PWRAP_RG_SPI_CON0,
+ PWRAP_RG_SPI_RECORD0,
+ PWRAP_RG_SPI_CON2,
+ PWRAP_RG_SPI_CON3,
+ PWRAP_RG_SPI_CON4,
+ PWRAP_RG_SPI_CON5,
+ PWRAP_RG_SPI_CON6,
+ PWRAP_RG_SPI_CON7,
+ PWRAP_RG_SPI_CON8,
+ PWRAP_RG_SPI_CON13,
+ PWRAP_SPISLV_KEY,
+
/* MT6397 only regs */
PWRAP_DEW_EVENT_OUT_EN,
PWRAP_DEW_EVENT_SRC_EN,
@@ -100,10 +128,6 @@ enum dew_regs {
PWRAP_DEW_EVENT_TEST,
PWRAP_DEW_CIPHER_LOAD,
PWRAP_DEW_CIPHER_START,
-
- /* MT6323 only regs */
- PWRAP_DEW_CIPHER_EN,
- PWRAP_DEW_RDDMY_NO,
};
static const u32 mt6323_regs[] = {
@@ -123,6 +147,64 @@ static const u32 mt6323_regs[] = {
[PWRAP_DEW_RDDMY_NO] = 0x01a4,
};
+static const u32 mt6351_regs[] = {
+ [PWRAP_DEW_DIO_EN] = 0x02F2,
+ [PWRAP_DEW_READ_TEST] = 0x02F4,
+ [PWRAP_DEW_WRITE_TEST] = 0x02F6,
+ [PWRAP_DEW_CRC_EN] = 0x02FA,
+ [PWRAP_DEW_CRC_VAL] = 0x02FC,
+ [PWRAP_DEW_CIPHER_KEY_SEL] = 0x0300,
+ [PWRAP_DEW_CIPHER_IV_SEL] = 0x0302,
+ [PWRAP_DEW_CIPHER_EN] = 0x0304,
+ [PWRAP_DEW_CIPHER_RDY] = 0x0306,
+ [PWRAP_DEW_CIPHER_MODE] = 0x0308,
+ [PWRAP_DEW_CIPHER_SWRST] = 0x030A,
+ [PWRAP_DEW_RDDMY_NO] = 0x030C,
+};
+
+static const u32 mt6357_regs[] = {
+ [PWRAP_DEW_DIO_EN] = 0x040A,
+ [PWRAP_DEW_READ_TEST] = 0x040C,
+ [PWRAP_DEW_WRITE_TEST] = 0x040E,
+ [PWRAP_DEW_CRC_EN] = 0x0412,
+ [PWRAP_DEW_CRC_VAL] = 0x0414,
+ [PWRAP_DEW_CIPHER_KEY_SEL] = 0x0418,
+ [PWRAP_DEW_CIPHER_IV_SEL] = 0x041A,
+ [PWRAP_DEW_CIPHER_EN] = 0x041C,
+ [PWRAP_DEW_CIPHER_RDY] = 0x041E,
+ [PWRAP_DEW_CIPHER_MODE] = 0x0420,
+ [PWRAP_DEW_CIPHER_SWRST] = 0x0422,
+ [PWRAP_DEW_RDDMY_NO] = 0x0424,
+};
+
+static const u32 mt6358_regs[] = {
+ [PWRAP_SMT_CON1] = 0x0030,
+ [PWRAP_DRV_CON1] = 0x0038,
+ [PWRAP_FILTER_CON0] = 0x0040,
+ [PWRAP_GPIO_PULLEN0_CLR] = 0x0098,
+ [PWRAP_RG_SPI_CON0] = 0x0408,
+ [PWRAP_RG_SPI_RECORD0] = 0x040a,
+ [PWRAP_DEW_DIO_EN] = 0x040c,
+ [PWRAP_DEW_READ_TEST] = 0x040e,
+ [PWRAP_DEW_WRITE_TEST] = 0x0410,
+ [PWRAP_DEW_CRC_EN] = 0x0414,
+ [PWRAP_DEW_CIPHER_KEY_SEL] = 0x041a,
+ [PWRAP_DEW_CIPHER_IV_SEL] = 0x041c,
+ [PWRAP_DEW_CIPHER_EN] = 0x041e,
+ [PWRAP_DEW_CIPHER_RDY] = 0x0420,
+ [PWRAP_DEW_CIPHER_MODE] = 0x0422,
+ [PWRAP_DEW_CIPHER_SWRST] = 0x0424,
+ [PWRAP_RG_SPI_CON2] = 0x0432,
+ [PWRAP_RG_SPI_CON3] = 0x0434,
+ [PWRAP_RG_SPI_CON4] = 0x0436,
+ [PWRAP_RG_SPI_CON5] = 0x0438,
+ [PWRAP_RG_SPI_CON6] = 0x043a,
+ [PWRAP_RG_SPI_CON7] = 0x043c,
+ [PWRAP_RG_SPI_CON8] = 0x043e,
+ [PWRAP_RG_SPI_CON13] = 0x0448,
+ [PWRAP_SPISLV_KEY] = 0x044a,
+};
+
static const u32 mt6397_regs[] = {
[PWRAP_DEW_BASE] = 0xbc00,
[PWRAP_DEW_EVENT_OUT_EN] = 0xbc00,
@@ -146,21 +228,6 @@ static const u32 mt6397_regs[] = {
[PWRAP_DEW_CIPHER_SWRST] = 0xbc24,
};
-static const u32 mt6351_regs[] = {
- [PWRAP_DEW_DIO_EN] = 0x02F2,
- [PWRAP_DEW_READ_TEST] = 0x02F4,
- [PWRAP_DEW_WRITE_TEST] = 0x02F6,
- [PWRAP_DEW_CRC_EN] = 0x02FA,
- [PWRAP_DEW_CRC_VAL] = 0x02FC,
- [PWRAP_DEW_CIPHER_KEY_SEL] = 0x0300,
- [PWRAP_DEW_CIPHER_IV_SEL] = 0x0302,
- [PWRAP_DEW_CIPHER_EN] = 0x0304,
- [PWRAP_DEW_CIPHER_RDY] = 0x0306,
- [PWRAP_DEW_CIPHER_MODE] = 0x0308,
- [PWRAP_DEW_CIPHER_SWRST] = 0x030A,
- [PWRAP_DEW_RDDMY_NO] = 0x030C,
-};
-
enum pwrap_regs {
PWRAP_MUX_SEL,
PWRAP_WRAP_EN,
@@ -221,6 +288,8 @@ enum pwrap_regs {
PWRAP_CIPHER_SWRST,
PWRAP_DCM_EN,
PWRAP_DCM_DBC_PRD,
+ PWRAP_EINT_STA0_ADR,
+ PWRAP_EINT_STA1_ADR,
/* MT2701 only regs */
PWRAP_ADC_CMD_ADDR,
@@ -230,8 +299,6 @@ enum pwrap_regs {
PWRAP_ADC_RDATA_ADDR2,
/* MT7622 only regs */
- PWRAP_EINT_STA0_ADR,
- PWRAP_EINT_STA1_ADR,
PWRAP_STA,
PWRAP_CLR,
PWRAP_DVFS_ADR8,
@@ -293,6 +360,27 @@ enum pwrap_regs {
PWRAP_DVFS_WDATA7,
PWRAP_SPMINF_STA,
PWRAP_CIPHER_EN,
+
+ /* MT8183 only regs */
+ PWRAP_SI_SAMPLE_CTRL,
+ PWRAP_CSLEXT_WRITE,
+ PWRAP_CSLEXT_READ,
+ PWRAP_EXT_CK_WRITE,
+ PWRAP_STAUPD_CTRL,
+ PWRAP_WACS_P2P_EN,
+ PWRAP_INIT_DONE_P2P,
+ PWRAP_WACS_MD32_EN,
+ PWRAP_INIT_DONE_MD32,
+ PWRAP_INT1_EN,
+ PWRAP_INT1_FLG,
+ PWRAP_INT1_CLR,
+ PWRAP_WDT_SRC_EN_1,
+ PWRAP_INT_GPS_AUXADC_CMD_ADDR,
+ PWRAP_INT_GPS_AUXADC_CMD,
+ PWRAP_INT_GPS_AUXADC_RDATA_ADDR,
+ PWRAP_EXT_GPS_AUXADC_RDATA_ADDR,
+ PWRAP_GPSINF_0_STA,
+ PWRAP_GPSINF_1_STA,
};
static int mt2701_regs[] = {
@@ -381,6 +469,38 @@ static int mt2701_regs[] = {
[PWRAP_ADC_RDATA_ADDR2] = 0x154,
};
+static int mt6765_regs[] = {
+ [PWRAP_MUX_SEL] = 0x0,
+ [PWRAP_WRAP_EN] = 0x4,
+ [PWRAP_DIO_EN] = 0x8,
+ [PWRAP_RDDMY] = 0x20,
+ [PWRAP_CSHEXT_WRITE] = 0x24,
+ [PWRAP_CSHEXT_READ] = 0x28,
+ [PWRAP_CSLEXT_START] = 0x2C,
+ [PWRAP_CSLEXT_END] = 0x30,
+ [PWRAP_STAUPD_PRD] = 0x3C,
+ [PWRAP_HARB_HPRIO] = 0x68,
+ [PWRAP_HIPRIO_ARB_EN] = 0x6C,
+ [PWRAP_MAN_EN] = 0x7C,
+ [PWRAP_MAN_CMD] = 0x80,
+ [PWRAP_WACS0_EN] = 0x8C,
+ [PWRAP_WACS1_EN] = 0x94,
+ [PWRAP_WACS2_EN] = 0x9C,
+ [PWRAP_INIT_DONE2] = 0xA0,
+ [PWRAP_WACS2_CMD] = 0xC20,
+ [PWRAP_WACS2_RDATA] = 0xC24,
+ [PWRAP_WACS2_VLDCLR] = 0xC28,
+ [PWRAP_INT_EN] = 0xB4,
+ [PWRAP_INT_FLG_RAW] = 0xB8,
+ [PWRAP_INT_FLG] = 0xBC,
+ [PWRAP_INT_CLR] = 0xC0,
+ [PWRAP_TIMER_EN] = 0xE8,
+ [PWRAP_WDT_UNIT] = 0xF0,
+ [PWRAP_WDT_SRC_EN] = 0xF4,
+ [PWRAP_DCM_EN] = 0x1DC,
+ [PWRAP_DCM_DBC_PRD] = 0x1E0,
+};
+
static int mt6797_regs[] = {
[PWRAP_MUX_SEL] = 0x0,
[PWRAP_WRAP_EN] = 0x4,
@@ -526,6 +646,79 @@ static int mt7622_regs[] = {
[PWRAP_SPI2_CTRL] = 0x244,
};
+static int mt8135_regs[] = {
+ [PWRAP_MUX_SEL] = 0x0,
+ [PWRAP_WRAP_EN] = 0x4,
+ [PWRAP_DIO_EN] = 0x8,
+ [PWRAP_SIDLY] = 0xc,
+ [PWRAP_CSHEXT] = 0x10,
+ [PWRAP_CSHEXT_WRITE] = 0x14,
+ [PWRAP_CSHEXT_READ] = 0x18,
+ [PWRAP_CSLEXT_START] = 0x1c,
+ [PWRAP_CSLEXT_END] = 0x20,
+ [PWRAP_STAUPD_PRD] = 0x24,
+ [PWRAP_STAUPD_GRPEN] = 0x28,
+ [PWRAP_STAUPD_MAN_TRIG] = 0x2c,
+ [PWRAP_STAUPD_STA] = 0x30,
+ [PWRAP_EVENT_IN_EN] = 0x34,
+ [PWRAP_EVENT_DST_EN] = 0x38,
+ [PWRAP_WRAP_STA] = 0x3c,
+ [PWRAP_RRARB_INIT] = 0x40,
+ [PWRAP_RRARB_EN] = 0x44,
+ [PWRAP_RRARB_STA0] = 0x48,
+ [PWRAP_RRARB_STA1] = 0x4c,
+ [PWRAP_HARB_INIT] = 0x50,
+ [PWRAP_HARB_HPRIO] = 0x54,
+ [PWRAP_HIPRIO_ARB_EN] = 0x58,
+ [PWRAP_HARB_STA0] = 0x5c,
+ [PWRAP_HARB_STA1] = 0x60,
+ [PWRAP_MAN_EN] = 0x64,
+ [PWRAP_MAN_CMD] = 0x68,
+ [PWRAP_MAN_RDATA] = 0x6c,
+ [PWRAP_MAN_VLDCLR] = 0x70,
+ [PWRAP_WACS0_EN] = 0x74,
+ [PWRAP_INIT_DONE0] = 0x78,
+ [PWRAP_WACS0_CMD] = 0x7c,
+ [PWRAP_WACS0_RDATA] = 0x80,
+ [PWRAP_WACS0_VLDCLR] = 0x84,
+ [PWRAP_WACS1_EN] = 0x88,
+ [PWRAP_INIT_DONE1] = 0x8c,
+ [PWRAP_WACS1_CMD] = 0x90,
+ [PWRAP_WACS1_RDATA] = 0x94,
+ [PWRAP_WACS1_VLDCLR] = 0x98,
+ [PWRAP_WACS2_EN] = 0x9c,
+ [PWRAP_INIT_DONE2] = 0xa0,
+ [PWRAP_WACS2_CMD] = 0xa4,
+ [PWRAP_WACS2_RDATA] = 0xa8,
+ [PWRAP_WACS2_VLDCLR] = 0xac,
+ [PWRAP_INT_EN] = 0xb0,
+ [PWRAP_INT_FLG_RAW] = 0xb4,
+ [PWRAP_INT_FLG] = 0xb8,
+ [PWRAP_INT_CLR] = 0xbc,
+ [PWRAP_SIG_ADR] = 0xc0,
+ [PWRAP_SIG_MODE] = 0xc4,
+ [PWRAP_SIG_VALUE] = 0xc8,
+ [PWRAP_SIG_ERRVAL] = 0xcc,
+ [PWRAP_CRC_EN] = 0xd0,
+ [PWRAP_EVENT_STA] = 0xd4,
+ [PWRAP_EVENT_STACLR] = 0xd8,
+ [PWRAP_TIMER_EN] = 0xdc,
+ [PWRAP_TIMER_STA] = 0xe0,
+ [PWRAP_WDT_UNIT] = 0xe4,
+ [PWRAP_WDT_SRC_EN] = 0xe8,
+ [PWRAP_WDT_FLG] = 0xec,
+ [PWRAP_DEBUG_INT_SEL] = 0xf0,
+ [PWRAP_CIPHER_KEY_SEL] = 0x134,
+ [PWRAP_CIPHER_IV_SEL] = 0x138,
+ [PWRAP_CIPHER_LOAD] = 0x13c,
+ [PWRAP_CIPHER_START] = 0x140,
+ [PWRAP_CIPHER_RDY] = 0x144,
+ [PWRAP_CIPHER_MODE] = 0x148,
+ [PWRAP_CIPHER_SWRST] = 0x14c,
+ [PWRAP_DCM_EN] = 0x15c,
+ [PWRAP_DCM_DBC_PRD] = 0x160,
+};
+
static int mt8173_regs[] = {
[PWRAP_MUX_SEL] = 0x0,
[PWRAP_WRAP_EN] = 0x4,
@@ -608,92 +801,74 @@ static int mt8173_regs[] = {
[PWRAP_DCM_DBC_PRD] = 0x148,
};
-static int mt8135_regs[] = {
- [PWRAP_MUX_SEL] = 0x0,
- [PWRAP_WRAP_EN] = 0x4,
- [PWRAP_DIO_EN] = 0x8,
- [PWRAP_SIDLY] = 0xc,
- [PWRAP_CSHEXT] = 0x10,
- [PWRAP_CSHEXT_WRITE] = 0x14,
- [PWRAP_CSHEXT_READ] = 0x18,
- [PWRAP_CSLEXT_START] = 0x1c,
- [PWRAP_CSLEXT_END] = 0x20,
- [PWRAP_STAUPD_PRD] = 0x24,
- [PWRAP_STAUPD_GRPEN] = 0x28,
- [PWRAP_STAUPD_MAN_TRIG] = 0x2c,
- [PWRAP_STAUPD_STA] = 0x30,
- [PWRAP_EVENT_IN_EN] = 0x34,
- [PWRAP_EVENT_DST_EN] = 0x38,
- [PWRAP_WRAP_STA] = 0x3c,
- [PWRAP_RRARB_INIT] = 0x40,
- [PWRAP_RRARB_EN] = 0x44,
- [PWRAP_RRARB_STA0] = 0x48,
- [PWRAP_RRARB_STA1] = 0x4c,
- [PWRAP_HARB_INIT] = 0x50,
- [PWRAP_HARB_HPRIO] = 0x54,
- [PWRAP_HIPRIO_ARB_EN] = 0x58,
- [PWRAP_HARB_STA0] = 0x5c,
- [PWRAP_HARB_STA1] = 0x60,
- [PWRAP_MAN_EN] = 0x64,
- [PWRAP_MAN_CMD] = 0x68,
- [PWRAP_MAN_RDATA] = 0x6c,
- [PWRAP_MAN_VLDCLR] = 0x70,
- [PWRAP_WACS0_EN] = 0x74,
- [PWRAP_INIT_DONE0] = 0x78,
- [PWRAP_WACS0_CMD] = 0x7c,
- [PWRAP_WACS0_RDATA] = 0x80,
- [PWRAP_WACS0_VLDCLR] = 0x84,
- [PWRAP_WACS1_EN] = 0x88,
- [PWRAP_INIT_DONE1] = 0x8c,
- [PWRAP_WACS1_CMD] = 0x90,
- [PWRAP_WACS1_RDATA] = 0x94,
- [PWRAP_WACS1_VLDCLR] = 0x98,
- [PWRAP_WACS2_EN] = 0x9c,
- [PWRAP_INIT_DONE2] = 0xa0,
- [PWRAP_WACS2_CMD] = 0xa4,
- [PWRAP_WACS2_RDATA] = 0xa8,
- [PWRAP_WACS2_VLDCLR] = 0xac,
- [PWRAP_INT_EN] = 0xb0,
- [PWRAP_INT_FLG_RAW] = 0xb4,
- [PWRAP_INT_FLG] = 0xb8,
- [PWRAP_INT_CLR] = 0xbc,
- [PWRAP_SIG_ADR] = 0xc0,
- [PWRAP_SIG_MODE] = 0xc4,
- [PWRAP_SIG_VALUE] = 0xc8,
- [PWRAP_SIG_ERRVAL] = 0xcc,
- [PWRAP_CRC_EN] = 0xd0,
- [PWRAP_EVENT_STA] = 0xd4,
- [PWRAP_EVENT_STACLR] = 0xd8,
- [PWRAP_TIMER_EN] = 0xdc,
- [PWRAP_TIMER_STA] = 0xe0,
- [PWRAP_WDT_UNIT] = 0xe4,
- [PWRAP_WDT_SRC_EN] = 0xe8,
- [PWRAP_WDT_FLG] = 0xec,
- [PWRAP_DEBUG_INT_SEL] = 0xf0,
- [PWRAP_CIPHER_KEY_SEL] = 0x134,
- [PWRAP_CIPHER_IV_SEL] = 0x138,
- [PWRAP_CIPHER_LOAD] = 0x13c,
- [PWRAP_CIPHER_START] = 0x140,
- [PWRAP_CIPHER_RDY] = 0x144,
- [PWRAP_CIPHER_MODE] = 0x148,
- [PWRAP_CIPHER_SWRST] = 0x14c,
- [PWRAP_DCM_EN] = 0x15c,
- [PWRAP_DCM_DBC_PRD] = 0x160,
+static int mt8183_regs[] = {
+ [PWRAP_MUX_SEL] = 0x0,
+ [PWRAP_WRAP_EN] = 0x4,
+ [PWRAP_DIO_EN] = 0x8,
+ [PWRAP_SI_SAMPLE_CTRL] = 0xC,
+ [PWRAP_RDDMY] = 0x14,
+ [PWRAP_CSHEXT_WRITE] = 0x18,
+ [PWRAP_CSHEXT_READ] = 0x1C,
+ [PWRAP_CSLEXT_WRITE] = 0x20,
+ [PWRAP_CSLEXT_READ] = 0x24,
+ [PWRAP_EXT_CK_WRITE] = 0x28,
+ [PWRAP_STAUPD_CTRL] = 0x30,
+ [PWRAP_STAUPD_GRPEN] = 0x34,
+ [PWRAP_EINT_STA0_ADR] = 0x38,
+ [PWRAP_HARB_HPRIO] = 0x5C,
+ [PWRAP_HIPRIO_ARB_EN] = 0x60,
+ [PWRAP_MAN_EN] = 0x70,
+ [PWRAP_MAN_CMD] = 0x74,
+ [PWRAP_WACS0_EN] = 0x80,
+ [PWRAP_INIT_DONE0] = 0x84,
+ [PWRAP_WACS1_EN] = 0x88,
+ [PWRAP_INIT_DONE1] = 0x8C,
+ [PWRAP_WACS2_EN] = 0x90,
+ [PWRAP_INIT_DONE2] = 0x94,
+ [PWRAP_WACS_P2P_EN] = 0xA0,
+ [PWRAP_INIT_DONE_P2P] = 0xA4,
+ [PWRAP_WACS_MD32_EN] = 0xA8,
+ [PWRAP_INIT_DONE_MD32] = 0xAC,
+ [PWRAP_INT_EN] = 0xB0,
+ [PWRAP_INT_FLG] = 0xB8,
+ [PWRAP_INT_CLR] = 0xBC,
+ [PWRAP_INT1_EN] = 0xC0,
+ [PWRAP_INT1_FLG] = 0xC8,
+ [PWRAP_INT1_CLR] = 0xCC,
+ [PWRAP_SIG_ADR] = 0xD0,
+ [PWRAP_CRC_EN] = 0xE0,
+ [PWRAP_TIMER_EN] = 0xE4,
+ [PWRAP_WDT_UNIT] = 0xEC,
+ [PWRAP_WDT_SRC_EN] = 0xF0,
+ [PWRAP_WDT_SRC_EN_1] = 0xF4,
+ [PWRAP_INT_GPS_AUXADC_CMD_ADDR] = 0x1DC,
+ [PWRAP_INT_GPS_AUXADC_CMD] = 0x1E0,
+ [PWRAP_INT_GPS_AUXADC_RDATA_ADDR] = 0x1E4,
+ [PWRAP_EXT_GPS_AUXADC_RDATA_ADDR] = 0x1E8,
+ [PWRAP_GPSINF_0_STA] = 0x1EC,
+ [PWRAP_GPSINF_1_STA] = 0x1F0,
+ [PWRAP_WACS2_CMD] = 0xC20,
+ [PWRAP_WACS2_RDATA] = 0xC24,
+ [PWRAP_WACS2_VLDCLR] = 0xC28,
};
enum pmic_type {
PMIC_MT6323,
PMIC_MT6351,
+ PMIC_MT6357,
+ PMIC_MT6358,
PMIC_MT6380,
PMIC_MT6397,
};
enum pwrap_type {
PWRAP_MT2701,
+ PWRAP_MT6765,
PWRAP_MT6797,
PWRAP_MT7622,
PWRAP_MT8135,
PWRAP_MT8173,
+ PWRAP_MT8183,
};
struct pmic_wrapper;
@@ -731,9 +906,11 @@ struct pmic_wrapper_type {
enum pwrap_type type;
u32 arb_en_all;
u32 int_en_all;
+ u32 int1_en_all;
u32 spi_w;
u32 wdt_src;
- unsigned int has_bridge:1;
+ /* Flags indicating the capability for the target pwrap */
+ u32 caps;
int (*init_reg_clock)(struct pmic_wrapper *wrp);
int (*init_soc_specific)(struct pmic_wrapper *wrp);
};
@@ -1096,7 +1273,7 @@ static bool pwrap_is_pmic_cipher_ready(struct pmic_wrapper *wrp)
ret = pwrap_read(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_RDY],
&rdata);
if (ret)
- return 0;
+ return false;
return rdata == 1;
}
@@ -1117,6 +1294,7 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
pwrap_writel(wrp, 1, PWRAP_CIPHER_START);
break;
case PWRAP_MT2701:
+ case PWRAP_MT6765:
case PWRAP_MT6797:
case PWRAP_MT8173:
pwrap_writel(wrp, 1, PWRAP_CIPHER_EN);
@@ -1124,6 +1302,8 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
case PWRAP_MT7622:
pwrap_writel(wrp, 0, PWRAP_CIPHER_EN);
break;
+ case PWRAP_MT8183:
+ break;
}
/* Config cipher mode @PMIC */
@@ -1141,6 +1321,7 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
break;
case PMIC_MT6323:
case PMIC_MT6351:
+ case PMIC_MT6357:
pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CIPHER_EN],
0x1);
break;
@@ -1276,6 +1457,23 @@ static int pwrap_mt7622_init_soc_specific(struct pmic_wrapper *wrp)
return 0;
}
+static int pwrap_mt8183_init_soc_specific(struct pmic_wrapper *wrp)
+{
+ pwrap_writel(wrp, 0xf5, PWRAP_STAUPD_GRPEN);
+
+ pwrap_write(wrp, wrp->slave->dew_regs[PWRAP_DEW_CRC_EN], 0x1);
+ pwrap_writel(wrp, 1, PWRAP_CRC_EN);
+ pwrap_writel(wrp, 0x416, PWRAP_SIG_ADR);
+ pwrap_writel(wrp, 0x42e, PWRAP_EINT_STA0_ADR);
+
+ pwrap_writel(wrp, 1, PWRAP_WACS_P2P_EN);
+ pwrap_writel(wrp, 1, PWRAP_WACS_MD32_EN);
+ pwrap_writel(wrp, 1, PWRAP_INIT_DONE_P2P);
+ pwrap_writel(wrp, 1, PWRAP_INIT_DONE_MD32);
+
+ return 0;
+}
+
static int pwrap_init(struct pmic_wrapper *wrp)
{
int ret;
@@ -1348,7 +1546,7 @@ static int pwrap_init(struct pmic_wrapper *wrp)
pwrap_writel(wrp, 1, PWRAP_INIT_DONE0);
pwrap_writel(wrp, 1, PWRAP_INIT_DONE1);
- if (wrp->master->has_bridge) {
+ if (HAS_CAP(wrp->master->caps, PWRAP_CAP_BRIDGE)) {
writel(1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INIT_DONE3);
writel(1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INIT_DONE4);
}
@@ -1362,11 +1560,15 @@ static irqreturn_t pwrap_interrupt(int irqno, void *dev_id)
struct pmic_wrapper *wrp = dev_id;
rdata = pwrap_readl(wrp, PWRAP_INT_FLG);
-
dev_err(wrp->dev, "unexpected interrupt int=0x%x\n", rdata);
-
pwrap_writel(wrp, 0xffffffff, PWRAP_INT_CLR);
+ if (HAS_CAP(wrp->master->caps, PWRAP_CAP_INT1_EN)) {
+ rdata = pwrap_readl(wrp, PWRAP_INT1_FLG);
+ dev_err(wrp->dev, "unexpected interrupt int1=0x%x\n", rdata);
+ pwrap_writel(wrp, 0xffffffff, PWRAP_INT1_CLR);
+ }
+
return IRQ_HANDLED;
}
@@ -1398,6 +1600,33 @@ static const struct pwrap_slv_type pmic_mt6323 = {
.pwrap_write = pwrap_write16,
};
+static const struct pwrap_slv_type pmic_mt6351 = {
+ .dew_regs = mt6351_regs,
+ .type = PMIC_MT6351,
+ .regmap = &pwrap_regmap_config16,
+ .caps = 0,
+ .pwrap_read = pwrap_read16,
+ .pwrap_write = pwrap_write16,
+};
+
+static const struct pwrap_slv_type pmic_mt6357 = {
+ .dew_regs = mt6357_regs,
+ .type = PMIC_MT6357,
+ .regmap = &pwrap_regmap_config16,
+ .caps = 0,
+ .pwrap_read = pwrap_read16,
+ .pwrap_write = pwrap_write16,
+};
+
+static const struct pwrap_slv_type pmic_mt6358 = {
+ .dew_regs = mt6358_regs,
+ .type = PMIC_MT6358,
+ .regmap = &pwrap_regmap_config16,
+ .caps = PWRAP_SLV_CAP_SPI | PWRAP_SLV_CAP_DUALIO,
+ .pwrap_read = pwrap_read16,
+ .pwrap_write = pwrap_write16,
+};
+
static const struct pwrap_slv_type pmic_mt6380 = {
.dew_regs = NULL,
.type = PMIC_MT6380,
@@ -1417,19 +1646,19 @@ static const struct pwrap_slv_type pmic_mt6397 = {
.pwrap_write = pwrap_write16,
};
-static const struct pwrap_slv_type pmic_mt6351 = {
- .dew_regs = mt6351_regs,
- .type = PMIC_MT6351,
- .regmap = &pwrap_regmap_config16,
- .caps = 0,
- .pwrap_read = pwrap_read16,
- .pwrap_write = pwrap_write16,
-};
-
static const struct of_device_id of_slave_match_tbl[] = {
{
.compatible = "mediatek,mt6323",
.data = &pmic_mt6323,
+ }, {
+ .compatible = "mediatek,mt6351",
+ .data = &pmic_mt6351,
+ }, {
+ .compatible = "mediatek,mt6357",
+ .data = &pmic_mt6357,
+ }, {
+ .compatible = "mediatek,mt6358",
+ .data = &pmic_mt6358,
}, {
/* The MT6380 PMIC only implements a regulator, so we bind it
* directly instead of using a MFD.
@@ -1439,9 +1668,6 @@ static const struct of_device_id of_slave_match_tbl[] = {
}, {
.compatible = "mediatek,mt6397",
.data = &pmic_mt6397,
- }, {
- .compatible = "mediatek,mt6351",
- .data = &pmic_mt6351,
}, {
/* sentinel */
}
@@ -1453,21 +1679,35 @@ static const struct pmic_wrapper_type pwrap_mt2701 = {
.type = PWRAP_MT2701,
.arb_en_all = 0x3f,
.int_en_all = ~(u32)(BIT(31) | BIT(2)),
+ .int1_en_all = 0,
.spi_w = PWRAP_MAN_CMD_SPI_WRITE_NEW,
.wdt_src = PWRAP_WDT_SRC_MASK_ALL,
- .has_bridge = 0,
+ .caps = PWRAP_CAP_RESET | PWRAP_CAP_DCM,
.init_reg_clock = pwrap_mt2701_init_reg_clock,
.init_soc_specific = pwrap_mt2701_init_soc_specific,
};
+static const struct pmic_wrapper_type pwrap_mt6765 = {
+ .regs = mt6765_regs,
+ .type = PWRAP_MT6765,
+ .arb_en_all = 0x3fd35,
+ .int_en_all = 0xffffffff,
+ .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
+ .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
+ .caps = PWRAP_CAP_RESET | PWRAP_CAP_DCM,
+ .init_reg_clock = pwrap_common_init_reg_clock,
+ .init_soc_specific = NULL,
+};
+
static const struct pmic_wrapper_type pwrap_mt6797 = {
.regs = mt6797_regs,
.type = PWRAP_MT6797,
.arb_en_all = 0x01fff,
.int_en_all = 0xffffffc6,
+ .int1_en_all = 0,
.spi_w = PWRAP_MAN_CMD_SPI_WRITE,
.wdt_src = PWRAP_WDT_SRC_MASK_ALL,
- .has_bridge = 0,
+ .caps = PWRAP_CAP_RESET | PWRAP_CAP_DCM,
.init_reg_clock = pwrap_common_init_reg_clock,
.init_soc_specific = NULL,
};
@@ -1477,9 +1717,10 @@ static const struct pmic_wrapper_type pwrap_mt7622 = {
.type = PWRAP_MT7622,
.arb_en_all = 0xff,
.int_en_all = ~(u32)BIT(31),
+ .int1_en_all = 0,
.spi_w = PWRAP_MAN_CMD_SPI_WRITE,
.wdt_src = PWRAP_WDT_SRC_MASK_ALL,
- .has_bridge = 0,
+ .caps = PWRAP_CAP_RESET | PWRAP_CAP_DCM,
.init_reg_clock = pwrap_common_init_reg_clock,
.init_soc_specific = pwrap_mt7622_init_soc_specific,
};
@@ -1489,9 +1730,10 @@ static const struct pmic_wrapper_type pwrap_mt8135 = {
.type = PWRAP_MT8135,
.arb_en_all = 0x1ff,
.int_en_all = ~(u32)(BIT(31) | BIT(1)),
+ .int1_en_all = 0,
.spi_w = PWRAP_MAN_CMD_SPI_WRITE,
.wdt_src = PWRAP_WDT_SRC_MASK_ALL,
- .has_bridge = 1,
+ .caps = PWRAP_CAP_BRIDGE | PWRAP_CAP_RESET | PWRAP_CAP_DCM,
.init_reg_clock = pwrap_common_init_reg_clock,
.init_soc_specific = pwrap_mt8135_init_soc_specific,
};
@@ -1501,17 +1743,34 @@ static const struct pmic_wrapper_type pwrap_mt8173 = {
.type = PWRAP_MT8173,
.arb_en_all = 0x3f,
.int_en_all = ~(u32)(BIT(31) | BIT(1)),
+ .int1_en_all = 0,
.spi_w = PWRAP_MAN_CMD_SPI_WRITE,
.wdt_src = PWRAP_WDT_SRC_MASK_NO_STAUPD,
- .has_bridge = 0,
+ .caps = PWRAP_CAP_RESET | PWRAP_CAP_DCM,
.init_reg_clock = pwrap_common_init_reg_clock,
.init_soc_specific = pwrap_mt8173_init_soc_specific,
};
+static const struct pmic_wrapper_type pwrap_mt8183 = {
+ .regs = mt8183_regs,
+ .type = PWRAP_MT8183,
+ .arb_en_all = 0x3fa75,
+ .int_en_all = 0xffffffff,
+ .int1_en_all = 0xeef7ffff,
+ .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
+ .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
+ .caps = PWRAP_CAP_INT1_EN | PWRAP_CAP_WDT_SRC1,
+ .init_reg_clock = pwrap_common_init_reg_clock,
+ .init_soc_specific = pwrap_mt8183_init_soc_specific,
+};
+
static const struct of_device_id of_pwrap_match_tbl[] = {
{
.compatible = "mediatek,mt2701-pwrap",
.data = &pwrap_mt2701,
+ }, {
+ .compatible = "mediatek,mt6765-pwrap",
+ .data = &pwrap_mt6765,
}, {
.compatible = "mediatek,mt6797-pwrap",
.data = &pwrap_mt6797,
@@ -1524,6 +1783,9 @@ static const struct of_device_id of_pwrap_match_tbl[] = {
}, {
.compatible = "mediatek,mt8173-pwrap",
.data = &pwrap_mt8173,
+ }, {
+ .compatible = "mediatek,mt8183-pwrap",
+ .data = &pwrap_mt8183,
}, {
/* sentinel */
}
@@ -1561,14 +1823,16 @@ static int pwrap_probe(struct platform_device *pdev)
if (IS_ERR(wrp->base))
return PTR_ERR(wrp->base);
- wrp->rstc = devm_reset_control_get(wrp->dev, "pwrap");
- if (IS_ERR(wrp->rstc)) {
- ret = PTR_ERR(wrp->rstc);
- dev_dbg(wrp->dev, "cannot get pwrap reset: %d\n", ret);
- return ret;
+ if (HAS_CAP(wrp->master->caps, PWRAP_CAP_RESET)) {
+ wrp->rstc = devm_reset_control_get(wrp->dev, "pwrap");
+ if (IS_ERR(wrp->rstc)) {
+ ret = PTR_ERR(wrp->rstc);
+ dev_dbg(wrp->dev, "cannot get pwrap reset: %d\n", ret);
+ return ret;
+ }
}
- if (wrp->master->has_bridge) {
+ if (HAS_CAP(wrp->master->caps, PWRAP_CAP_BRIDGE)) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"pwrap-bridge");
wrp->bridge_base = devm_ioremap_resource(wrp->dev, res);
@@ -1608,8 +1872,10 @@ static int pwrap_probe(struct platform_device *pdev)
goto err_out1;
/* Enable internal dynamic clock */
- pwrap_writel(wrp, 1, PWRAP_DCM_EN);
- pwrap_writel(wrp, 0, PWRAP_DCM_DBC_PRD);
+ if (HAS_CAP(wrp->master->caps, PWRAP_CAP_DCM)) {
+ pwrap_writel(wrp, 1, PWRAP_DCM_EN);
+ pwrap_writel(wrp, 0, PWRAP_DCM_DBC_PRD);
+ }
/*
* The PMIC could already be initialized by the bootloader.
@@ -1636,8 +1902,17 @@ static int pwrap_probe(struct platform_device *pdev)
* so STAUPD of WDT_SRC which should be turned off
*/
pwrap_writel(wrp, wrp->master->wdt_src, PWRAP_WDT_SRC_EN);
+ if (HAS_CAP(wrp->master->caps, PWRAP_CAP_WDT_SRC1))
+ pwrap_writel(wrp, wrp->master->wdt_src, PWRAP_WDT_SRC_EN_1);
+
pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
pwrap_writel(wrp, wrp->master->int_en_all, PWRAP_INT_EN);
+ /*
+ * We add INT1 interrupt to handle starvation and request exception
+ * If we support it, we should enable it here.
+ */
+ if (HAS_CAP(wrp->master->caps, PWRAP_CAP_INT1_EN))
+ pwrap_writel(wrp, wrp->master->int1_en_all, PWRAP_INT1_EN);
irq = platform_get_irq(pdev, 0);
ret = devm_request_irq(wrp->dev, irq, pwrap_interrupt,
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 41986d96f24b6952c8f90b541a5af723899617c3..684cb51694d1ff7a917b6883d5d00847698570d3 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -33,7 +33,7 @@ config QCOM_GLINK_SSR
config QCOM_GSBI
tristate "QCOM General Serial Bus Interface"
- depends on ARCH_QCOM
+ depends on ARCH_QCOM || COMPILE_TEST
select MFD_SYSCON
help
Say y here to enable GSBI support. The GSBI provides control
@@ -42,7 +42,7 @@ config QCOM_GSBI
config QCOM_LLCC
tristate "Qualcomm Technologies, Inc. LLCC driver"
- depends on ARCH_QCOM
+ depends on ARCH_QCOM || COMPILE_TEST
help
Qualcomm Technologies, Inc. platform specific
Last Level Cache Controller(LLCC) driver. This provides interfaces
@@ -73,7 +73,8 @@ config QCOM_PM
config QCOM_QMI_HELPERS
tristate
- depends on (ARCH_QCOM || COMPILE_TEST) && NET
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on NET
help
Helper library for handling QMI encoded messages. QMI encoded
messages are used in communication between the majority of QRTR
@@ -94,7 +95,7 @@ config QCOM_RMTFS_MEM
config QCOM_RPMH
bool "Qualcomm RPM-Hardened (RPMH) Communication"
- depends on ARCH_QCOM && ARM64 && OF || COMPILE_TEST
+ depends on ARCH_QCOM && ARM64 || COMPILE_TEST
help
Support for communication with the hardened-RPM blocks in
Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
@@ -104,7 +105,7 @@ config QCOM_RPMH
config QCOM_SMEM
tristate "Qualcomm Shared Memory Manager (SMEM)"
- depends on ARCH_QCOM
+ depends on ARCH_QCOM || COMPILE_TEST
depends on HWSPINLOCK
help
Say y here to enable support for the Qualcomm Shared Memory Manager.
@@ -113,8 +114,8 @@ config QCOM_SMEM
config QCOM_SMD_RPM
tristate "Qualcomm Resource Power Manager (RPM) over SMD"
- depends on ARCH_QCOM
- depends on RPMSG && OF
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on RPMSG
help
If you say yes to this option, support will be included for the
Resource Power Manager system found in the Qualcomm 8974 based
@@ -134,6 +135,7 @@ config QCOM_SMP2P
depends on MAILBOX
depends on QCOM_SMEM
select QCOM_SMEM_STATE
+ select IRQ_DOMAIN
help
Say yes here to support the Qualcomm Shared Memory Point to Point
protocol.
@@ -142,13 +144,14 @@ config QCOM_SMSM
tristate "Qualcomm Shared Memory State Machine"
depends on QCOM_SMEM
select QCOM_SMEM_STATE
+ select IRQ_DOMAIN
help
Say yes here to support the Qualcomm Shared Memory State Machine.
The state machine is represented by bits in shared memory.
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
- depends on ARCH_QCOM
+ depends on ARCH_QCOM || COMPILE_TEST
depends on RPMSG
help
Client driver for the WCNSS_CTRL SMD channel, used to download nv
@@ -156,7 +159,7 @@ config QCOM_WCNSS_CTRL
config QCOM_APR
tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
- depends on ARCH_QCOM
+ depends on ARCH_QCOM || COMPILE_TEST
depends on RPMSG
help
Enable APR IPC protocol support between
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 4bda793ba6ae5bbc2d73082397700ae276255470..74f8b9607daa16fc3e7bbd6e26e6fcd67244dcde 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -87,7 +87,7 @@ static int apr_callback(struct rpmsg_device *rpdev, void *buf,
}
if (hdr->pkt_size < APR_HDR_SIZE || hdr->pkt_size != len) {
- dev_err(apr->dev, "APR: Wrong paket size\n");
+ dev_err(apr->dev, "APR: Wrong packet size\n");
return -EINVAL;
}
@@ -221,7 +221,7 @@ static int apr_add_device(struct device *dev, struct device_node *np,
if (np)
snprintf(adev->name, APR_NAME_SIZE, "%pOFn", np);
else
- strncpy(adev->name, id->name, APR_NAME_SIZE);
+ strscpy(adev->name, id->name, APR_NAME_SIZE);
dev_set_name(&adev->dev, "aprsvc:%s:%x:%x", adev->name,
id->domain_id, id->svc_id);
diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-slice.c
index 54063a31132fa0b21e2c1ee3ed5fd85c87e759c8..192ca761b2cb3a1f6c7615b3e179c94b0e1be51c 100644
--- a/drivers/soc/qcom/llcc-slice.c
+++ b/drivers/soc/qcom/llcc-slice.c
@@ -13,6 +13,7 @@
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
+#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/soc/qcom/llcc-qcom.h>
@@ -106,22 +107,24 @@ static int llcc_update_act_ctrl(u32 sid,
u32 slice_status;
int ret;
- act_ctrl_reg = drv_data->bcast_off + LLCC_TRP_ACT_CTRLn(sid);
- status_reg = drv_data->bcast_off + LLCC_TRP_STATUSn(sid);
+ act_ctrl_reg = LLCC_TRP_ACT_CTRLn(sid);
+ status_reg = LLCC_TRP_STATUSn(sid);
/* Set the ACTIVE trigger */
act_ctrl_reg_val |= ACT_CTRL_ACT_TRIG;
- ret = regmap_write(drv_data->regmap, act_ctrl_reg, act_ctrl_reg_val);
+ ret = regmap_write(drv_data->bcast_regmap, act_ctrl_reg,
+ act_ctrl_reg_val);
if (ret)
return ret;
/* Clear the ACTIVE trigger */
act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;
- ret = regmap_write(drv_data->regmap, act_ctrl_reg, act_ctrl_reg_val);
+ ret = regmap_write(drv_data->bcast_regmap, act_ctrl_reg,
+ act_ctrl_reg_val);
if (ret)
return ret;
- ret = regmap_read_poll_timeout(drv_data->regmap, status_reg,
+ ret = regmap_read_poll_timeout(drv_data->bcast_regmap, status_reg,
slice_status, !(slice_status & status),
0, LLCC_STATUS_READ_DELAY);
return ret;
@@ -223,19 +226,16 @@ static int qcom_llcc_cfg_program(struct platform_device *pdev)
u32 attr0_val;
u32 max_cap_cacheline;
u32 sz;
- int ret;
+ int ret = 0;
const struct llcc_slice_config *llcc_table;
struct llcc_slice_desc desc;
- u32 bcast_off = drv_data->bcast_off;
sz = drv_data->cfg_size;
llcc_table = drv_data->cfg;
for (i = 0; i < sz; i++) {
- attr1_cfg = bcast_off +
- LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
- attr0_cfg = bcast_off +
- LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
+ attr1_cfg = LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
+ attr0_cfg = LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
attr1_val = llcc_table[i].cache_mode;
attr1_val |= llcc_table[i].probe_target_ways <<
@@ -260,10 +260,12 @@ static int qcom_llcc_cfg_program(struct platform_device *pdev)
attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
attr0_val |= llcc_table[i].bonus_ways << ATTR0_BONUS_WAYS_SHIFT;
- ret = regmap_write(drv_data->regmap, attr1_cfg, attr1_val);
+ ret = regmap_write(drv_data->bcast_regmap, attr1_cfg,
+ attr1_val);
if (ret)
return ret;
- ret = regmap_write(drv_data->regmap, attr0_cfg, attr0_val);
+ ret = regmap_write(drv_data->bcast_regmap, attr0_cfg,
+ attr0_val);
if (ret)
return ret;
if (llcc_table[i].activate_on_init) {
@@ -279,24 +281,37 @@ int qcom_llcc_probe(struct platform_device *pdev,
{
u32 num_banks;
struct device *dev = &pdev->dev;
- struct resource *res;
- void __iomem *base;
+ struct resource *llcc_banks_res, *llcc_bcast_res;
+ void __iomem *llcc_banks_base, *llcc_bcast_base;
int ret, i;
+ struct platform_device *llcc_edac;
drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
if (!drv_data)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
+ llcc_banks_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "llcc_base");
+ llcc_banks_base = devm_ioremap_resource(&pdev->dev, llcc_banks_res);
+ if (IS_ERR(llcc_banks_base))
+ return PTR_ERR(llcc_banks_base);
- drv_data->regmap = devm_regmap_init_mmio(dev, base,
- &llcc_regmap_config);
+ drv_data->regmap = devm_regmap_init_mmio(dev, llcc_banks_base,
+ &llcc_regmap_config);
if (IS_ERR(drv_data->regmap))
return PTR_ERR(drv_data->regmap);
+ llcc_bcast_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "llcc_broadcast_base");
+ llcc_bcast_base = devm_ioremap_resource(&pdev->dev, llcc_bcast_res);
+ if (IS_ERR(llcc_bcast_base))
+ return PTR_ERR(llcc_bcast_base);
+
+ drv_data->bcast_regmap = devm_regmap_init_mmio(dev, llcc_bcast_base,
+ &llcc_regmap_config);
+ if (IS_ERR(drv_data->bcast_regmap))
+ return PTR_ERR(drv_data->bcast_regmap);
+
ret = regmap_read(drv_data->regmap, LLCC_COMMON_STATUS0,
&num_banks);
if (ret)
@@ -318,8 +333,6 @@ int qcom_llcc_probe(struct platform_device *pdev,
for (i = 0; i < num_banks; i++)
drv_data->offsets[i] = i * BANK_OFFSET_STRIDE;
- drv_data->bcast_off = num_banks * BANK_OFFSET_STRIDE;
-
drv_data->bitmap = devm_kcalloc(dev,
BITS_TO_LONGS(drv_data->max_slices), sizeof(unsigned long),
GFP_KERNEL);
@@ -331,7 +344,20 @@ int qcom_llcc_probe(struct platform_device *pdev,
mutex_init(&drv_data->lock);
platform_set_drvdata(pdev, drv_data);
- return qcom_llcc_cfg_program(pdev);
+ ret = qcom_llcc_cfg_program(pdev);
+ if (ret)
+ return ret;
+
+ drv_data->ecc_irq = platform_get_irq(pdev, 0);
+ if (drv_data->ecc_irq >= 0) {
+ llcc_edac = platform_device_register_data(&pdev->dev,
+ "qcom_llcc_edac", -1, drv_data,
+ sizeof(*drv_data));
+ if (IS_ERR(llcc_edac))
+ dev_err(dev, "Failed to register llcc edac driver\n");
+ }
+
+ return ret;
}
EXPORT_SYMBOL_GPL(qcom_llcc_probe);
diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c
index 8a3678c2e83cf609daddfdcd7c50e9de0a671ad2..97bb5989aa21158dee92d58e5f22bc74729dbbc2 100644
--- a/drivers/soc/qcom/rmtfs_mem.c
+++ b/drivers/soc/qcom/rmtfs_mem.c
@@ -212,6 +212,11 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to parse qcom,vmid\n");
goto remove_cdev;
} else if (!ret) {
+ if (!qcom_scm_is_available()) {
+ ret = -EPROBE_DEFER;
+ goto remove_cdev;
+ }
+
perms[0].vmid = QCOM_SCM_VMID_HLOS;
perms[0].perm = QCOM_SCM_PERM_RW;
perms[1].vmid = vmid;
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index ee75da66d64bf06466791a41182bae0e64e1643f..75bd9a83aef00670d474a69c86fde81aa4794e93 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -121,6 +121,7 @@ static int tcs_invalidate(struct rsc_drv *drv, int type)
return -EAGAIN;
}
write_tcs_reg_sync(drv, RSC_DRV_CMD_ENABLE, m, 0);
+ write_tcs_reg_sync(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, m, 0);
}
bitmap_zero(tcs->slots, MAX_TCS_SLOTS);
spin_unlock(&tcs->lock);
@@ -239,6 +240,7 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
skip:
/* Reclaim the TCS */
write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0);
+ write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, i, 0);
write_tcs_reg(drv, RSC_DRV_IRQ_CLEAR, 0, BIT(i));
spin_lock(&drv->lock);
clear_bit(i, drv->tcs_in_use);
diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
index bf4bd71ab53fd9a36460b7d1a1f52793ea998506..f80d040601fd7cfa75efc6180ba59fc19b6ecb93 100644
--- a/drivers/soc/qcom/smem.c
+++ b/drivers/soc/qcom/smem.c
@@ -18,6 +18,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/soc/qcom/smem.h>
@@ -277,7 +278,7 @@ struct qcom_smem {
u32 item_count;
unsigned num_regions;
- struct smem_region regions[0];
+ struct smem_region regions[];
};
static void *
@@ -489,7 +490,7 @@ static void *qcom_smem_get_global(struct qcom_smem *smem,
size_t *size)
{
struct smem_header *header;
- struct smem_region *area;
+ struct smem_region *region;
struct smem_global_entry *entry;
u32 aux_base;
unsigned i;
@@ -502,12 +503,12 @@ static void *qcom_smem_get_global(struct qcom_smem *smem,
aux_base = le32_to_cpu(entry->aux_base) & AUX_BASE_MASK;
for (i = 0; i < smem->num_regions; i++) {
- area = &smem->regions[i];
+ region = &smem->regions[i];
- if (area->aux_base == aux_base || !aux_base) {
+ if (region->aux_base == aux_base || !aux_base) {
if (size != NULL)
*size = le32_to_cpu(entry->size);
- return area->virt_base + le32_to_cpu(entry->offset);
+ return region->virt_base + le32_to_cpu(entry->offset);
}
}
@@ -722,12 +723,59 @@ static u32 qcom_smem_get_item_count(struct qcom_smem *smem)
return le16_to_cpu(info->num_items);
}
+/*
+ * Validate the partition header for a partition whose partition
+ * table entry is supplied. Returns a pointer to its header if
+ * valid, or a null pointer otherwise.
+ */
+static struct smem_partition_header *
+qcom_smem_partition_header(struct qcom_smem *smem,
+ struct smem_ptable_entry *entry, u16 host0, u16 host1)
+{
+ struct smem_partition_header *header;
+ u32 size;
+
+ header = smem->regions[0].virt_base + le32_to_cpu(entry->offset);
+
+ if (memcmp(header->magic, SMEM_PART_MAGIC, sizeof(header->magic))) {
+ dev_err(smem->dev, "bad partition magic %02x %02x %02x %02x\n",
+ header->magic[0], header->magic[1],
+ header->magic[2], header->magic[3]);
+ return NULL;
+ }
+
+ if (host0 != le16_to_cpu(header->host0)) {
+ dev_err(smem->dev, "bad host0 (%hu != %hu)\n",
+ host0, le16_to_cpu(header->host0));
+ return NULL;
+ }
+ if (host1 != le16_to_cpu(header->host1)) {
+ dev_err(smem->dev, "bad host1 (%hu != %hu)\n",
+ host1, le16_to_cpu(header->host1));
+ return NULL;
+ }
+
+ size = le32_to_cpu(header->size);
+ if (size != le32_to_cpu(entry->size)) {
+ dev_err(smem->dev, "bad partition size (%u != %u)\n",
+ size, le32_to_cpu(entry->size));
+ return NULL;
+ }
+
+ if (le32_to_cpu(header->offset_free_uncached) > size) {
+ dev_err(smem->dev, "bad partition free uncached (%u > %u)\n",
+ le32_to_cpu(header->offset_free_uncached), size);
+ return NULL;
+ }
+
+ return header;
+}
+
static int qcom_smem_set_global_partition(struct qcom_smem *smem)
{
struct smem_partition_header *header;
struct smem_ptable_entry *entry;
struct smem_ptable *ptable;
- u32 host0, host1, size;
bool found = false;
int i;
@@ -742,10 +790,15 @@ static int qcom_smem_set_global_partition(struct qcom_smem *smem)
for (i = 0; i < le32_to_cpu(ptable->num_entries); i++) {
entry = &ptable->entry[i];
- host0 = le16_to_cpu(entry->host0);
- host1 = le16_to_cpu(entry->host1);
+ if (!le32_to_cpu(entry->offset))
+ continue;
+ if (!le32_to_cpu(entry->size))
+ continue;
+
+ if (le16_to_cpu(entry->host0) != SMEM_GLOBAL_HOST)
+ continue;
- if (host0 == SMEM_GLOBAL_HOST && host0 == host1) {
+ if (le16_to_cpu(entry->host1) == SMEM_GLOBAL_HOST) {
found = true;
break;
}
@@ -756,36 +809,10 @@ static int qcom_smem_set_global_partition(struct qcom_smem *smem)
return -EINVAL;
}
- if (!le32_to_cpu(entry->offset) || !le32_to_cpu(entry->size)) {
- dev_err(smem->dev, "Invalid entry for global partition\n");
+ header = qcom_smem_partition_header(smem, entry,
+ SMEM_GLOBAL_HOST, SMEM_GLOBAL_HOST);
+ if (!header)
return -EINVAL;
- }
-
- header = smem->regions[0].virt_base + le32_to_cpu(entry->offset);
- host0 = le16_to_cpu(header->host0);
- host1 = le16_to_cpu(header->host1);
-
- if (memcmp(header->magic, SMEM_PART_MAGIC, sizeof(header->magic))) {
- dev_err(smem->dev, "Global partition has invalid magic\n");
- return -EINVAL;
- }
-
- if (host0 != SMEM_GLOBAL_HOST && host1 != SMEM_GLOBAL_HOST) {
- dev_err(smem->dev, "Global partition hosts are invalid\n");
- return -EINVAL;
- }
-
- if (le32_to_cpu(header->size) != le32_to_cpu(entry->size)) {
- dev_err(smem->dev, "Global partition has invalid size\n");
- return -EINVAL;
- }
-
- size = le32_to_cpu(header->offset_free_uncached);
- if (size > le32_to_cpu(header->size)) {
- dev_err(smem->dev,
- "Global partition has invalid free pointer\n");
- return -EINVAL;
- }
smem->global_partition = header;
smem->global_cacheline = le32_to_cpu(entry->cacheline);
@@ -793,14 +820,14 @@ static int qcom_smem_set_global_partition(struct qcom_smem *smem)
return 0;
}
-static int qcom_smem_enumerate_partitions(struct qcom_smem *smem,
- unsigned int local_host)
+static int
+qcom_smem_enumerate_partitions(struct qcom_smem *smem, u16 local_host)
{
struct smem_partition_header *header;
struct smem_ptable_entry *entry;
struct smem_ptable *ptable;
unsigned int remote_host;
- u32 host0, host1;
+ u16 host0, host1;
int i;
ptable = qcom_smem_get_ptable(smem);
@@ -809,71 +836,33 @@ static int qcom_smem_enumerate_partitions(struct qcom_smem *smem,
for (i = 0; i < le32_to_cpu(ptable->num_entries); i++) {
entry = &ptable->entry[i];
- host0 = le16_to_cpu(entry->host0);
- host1 = le16_to_cpu(entry->host1);
-
- if (host0 != local_host && host1 != local_host)
- continue;
-
if (!le32_to_cpu(entry->offset))
continue;
-
if (!le32_to_cpu(entry->size))
continue;
+ host0 = le16_to_cpu(entry->host0);
+ host1 = le16_to_cpu(entry->host1);
if (host0 == local_host)
remote_host = host1;
- else
+ else if (host1 == local_host)
remote_host = host0;
+ else
+ continue;
if (remote_host >= SMEM_HOST_COUNT) {
- dev_err(smem->dev,
- "Invalid remote host %d\n",
- remote_host);
+ dev_err(smem->dev, "bad host %hu\n", remote_host);
return -EINVAL;
}
if (smem->partitions[remote_host]) {
- dev_err(smem->dev,
- "Already found a partition for host %d\n",
- remote_host);
- return -EINVAL;
- }
-
- header = smem->regions[0].virt_base + le32_to_cpu(entry->offset);
- host0 = le16_to_cpu(header->host0);
- host1 = le16_to_cpu(header->host1);
-
- if (memcmp(header->magic, SMEM_PART_MAGIC,
- sizeof(header->magic))) {
- dev_err(smem->dev,
- "Partition %d has invalid magic\n", i);
+ dev_err(smem->dev, "duplicate host %hu\n", remote_host);
return -EINVAL;
}
- if (host0 != local_host && host1 != local_host) {
- dev_err(smem->dev,
- "Partition %d hosts are invalid\n", i);
+ header = qcom_smem_partition_header(smem, entry, host0, host1);
+ if (!header)
return -EINVAL;
- }
-
- if (host0 != remote_host && host1 != remote_host) {
- dev_err(smem->dev,
- "Partition %d hosts are invalid\n", i);
- return -EINVAL;
- }
-
- if (le32_to_cpu(header->size) != le32_to_cpu(entry->size)) {
- dev_err(smem->dev,
- "Partition %d has invalid size\n", i);
- return -EINVAL;
- }
-
- if (le32_to_cpu(header->offset_free_uncached) > le32_to_cpu(header->size)) {
- dev_err(smem->dev,
- "Partition %d has invalid free pointer\n", i);
- return -EINVAL;
- }
smem->partitions[remote_host] = header;
smem->cacheline[remote_host] = le32_to_cpu(entry->cacheline);
@@ -887,6 +876,7 @@ static int qcom_smem_map_memory(struct qcom_smem *smem, struct device *dev,
{
struct device_node *np;
struct resource r;
+ resource_size_t size;
int ret;
np = of_parse_phandle(dev->of_node, name, 0);
@@ -899,12 +889,13 @@ static int qcom_smem_map_memory(struct qcom_smem *smem, struct device *dev,
of_node_put(np);
if (ret)
return ret;
+ size = resource_size(&r);
- smem->regions[i].aux_base = (u32)r.start;
- smem->regions[i].size = resource_size(&r);
- smem->regions[i].virt_base = devm_ioremap_wc(dev, r.start, resource_size(&r));
+ smem->regions[i].virt_base = devm_ioremap_wc(dev, r.start, size);
if (!smem->regions[i].virt_base)
return -ENOMEM;
+ smem->regions[i].aux_base = (u32)r.start;
+ smem->regions[i].size = size;
return 0;
}
@@ -962,6 +953,7 @@ static int qcom_smem_probe(struct platform_device *pdev)
return -EINVAL;
}
+ BUILD_BUG_ON(SMEM_HOST_APPS >= SMEM_HOST_COUNT);
ret = qcom_smem_enumerate_partitions(smem, SMEM_HOST_APPS);
if (ret < 0 && ret != -ENOENT)
return ret;
diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index f9d7a85b2822036dd1cdd7497032c98f2f7ea383..53807e839664e9f3ca70e92d9e5a5e336e38b4c0 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
cpumask_t mask;
bool use_scm_power_down = false;
+ if (!qcom_scm_is_available())
+ return -EPROBE_DEFER;
+
for (i = 0; ; i++) {
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
if (!state_node)
diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index df3ccb30bc2dddba0d2d6accccdd6a6c5a7bc53c..373400dd816d6802378dcf5bc7373fb921b22343 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -281,7 +281,7 @@ struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss, const char *name, rp
struct rpmsg_channel_info chinfo;
struct wcnss_ctrl *_wcnss = wcnss;
- strncpy(chinfo.name, name, sizeof(chinfo.name));
+ strscpy(chinfo.name, name, sizeof(chinfo.name));
chinfo.src = RPMSG_ADDR_ANY;
chinfo.dst = RPMSG_ADDR_ANY;
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 1d824cbd462dc2eaf875b3572e07e282e0ee2614..407f02c80e8b721ce5ed15dd9fcbb59b527d436a 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -1,14 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
config SOC_RENESAS
bool "Renesas SoC driver support" if COMPILE_TEST && !ARCH_RENESAS
default y if ARCH_RENESAS
select SOC_BUS
select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \
- ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77965 || \
- ARCH_R8A77970 || ARCH_R8A77980 || ARCH_R8A77990 || \
- ARCH_R8A77995
- select SYSC_R8A7743 if ARCH_R8A7743
+ ARCH_R8A774A1 || ARCH_R8A774C0 || ARCH_R8A7795 || \
+ ARCH_R8A7796 || ARCH_R8A77965 || ARCH_R8A77970 || \
+ ARCH_R8A77980 || ARCH_R8A77990 || ARCH_R8A77995
+ select SYSC_R8A7743 if ARCH_R8A7743 || ARCH_R8A7744
select SYSC_R8A7745 if ARCH_R8A7745
select SYSC_R8A77470 if ARCH_R8A77470
+ select SYSC_R8A774A1 if ARCH_R8A774A1
+ select SYSC_R8A774C0 if ARCH_R8A774C0
select SYSC_R8A7779 if ARCH_R8A7779
select SYSC_R8A7790 if ARCH_R8A7790
select SYSC_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793
@@ -37,6 +40,14 @@ config SYSC_R8A77470
bool "RZ/G1C System Controller support" if COMPILE_TEST
select SYSC_RCAR
+config SYSC_R8A774A1
+ bool "RZ/G2M System Controller support" if COMPILE_TEST
+ select SYSC_RCAR
+
+config SYSC_R8A774C0
+ bool "RZ/G2E System Controller support" if COMPILE_TEST
+ select SYSC_RCAR
+
config SYSC_R8A7779
bool "R-Car H1 System Controller support" if COMPILE_TEST
select SYSC_RCAR
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index c37b0803c1b60d9f0d385c76dd2be05a136dd35e..3bdd7dbc38a9c7a3a9407454ff00d81bc1ad90d4 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -6,6 +6,8 @@ obj-$(CONFIG_SOC_RENESAS) += renesas-soc.o
obj-$(CONFIG_SYSC_R8A7743) += r8a7743-sysc.o
obj-$(CONFIG_SYSC_R8A7745) += r8a7745-sysc.o
obj-$(CONFIG_SYSC_R8A77470) += r8a77470-sysc.o
+obj-$(CONFIG_SYSC_R8A774A1) += r8a774a1-sysc.o
+obj-$(CONFIG_SYSC_R8A774C0) += r8a774c0-sysc.o
obj-$(CONFIG_SYSC_R8A7779) += r8a7779-sysc.o
obj-$(CONFIG_SYSC_R8A7790) += r8a7790-sysc.o
obj-$(CONFIG_SYSC_R8A7791) += r8a7791-sysc.o
diff --git a/drivers/soc/renesas/r8a7743-sysc.c b/drivers/soc/renesas/r8a7743-sysc.c
index 9583a327d90c71600d28fcb100231b5f23a8b2b3..edf6436e879fa662803e1715d08bc6b87c4cbc93 100644
--- a/drivers/soc/renesas/r8a7743-sysc.c
+++ b/drivers/soc/renesas/r8a7743-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas RZ/G1M System Controller
*
* Copyright (C) 2016 Cogent Embedded Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation; of the License.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/r8a7745-sysc.c b/drivers/soc/renesas/r8a7745-sysc.c
index d17887c08aa1915ab5233aa9af41183ca85a4818..65dc6b09cc858d38eec48f05eded6a80f987b64f 100644
--- a/drivers/soc/renesas/r8a7745-sysc.c
+++ b/drivers/soc/renesas/r8a7745-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas RZ/G1E System Controller
*
* Copyright (C) 2016 Cogent Embedded Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation; of the License.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/r8a774a1-sysc.c b/drivers/soc/renesas/r8a774a1-sysc.c
new file mode 100644
index 0000000000000000000000000000000000000000..9db51ff6f5edde4e00ecc523ab134aea96fb27c5
--- /dev/null
+++ b/drivers/soc/renesas/r8a774a1-sysc.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2M System Controller
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ *
+ * Based on Renesas R-Car M3-W System Controller
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a774a1-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a774a1_areas[] __initconst = {
+ { "always-on", 0, 0, R8A774A1_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "ca57-scu", 0x1c0, 0, R8A774A1_PD_CA57_SCU, R8A774A1_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca57-cpu0", 0x80, 0, R8A774A1_PD_CA57_CPU0, R8A774A1_PD_CA57_SCU,
+ PD_CPU_NOCR },
+ { "ca57-cpu1", 0x80, 1, R8A774A1_PD_CA57_CPU1, R8A774A1_PD_CA57_SCU,
+ PD_CPU_NOCR },
+ { "ca53-scu", 0x140, 0, R8A774A1_PD_CA53_SCU, R8A774A1_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca53-cpu0", 0x200, 0, R8A774A1_PD_CA53_CPU0, R8A774A1_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu1", 0x200, 1, R8A774A1_PD_CA53_CPU1, R8A774A1_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu2", 0x200, 2, R8A774A1_PD_CA53_CPU2, R8A774A1_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu3", 0x200, 3, R8A774A1_PD_CA53_CPU3, R8A774A1_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "a3vc", 0x380, 0, R8A774A1_PD_A3VC, R8A774A1_PD_ALWAYS_ON },
+ { "a2vc0", 0x3c0, 0, R8A774A1_PD_A2VC0, R8A774A1_PD_A3VC },
+ { "a2vc1", 0x3c0, 1, R8A774A1_PD_A2VC1, R8A774A1_PD_A3VC },
+ { "3dg-a", 0x100, 0, R8A774A1_PD_3DG_A, R8A774A1_PD_ALWAYS_ON },
+ { "3dg-b", 0x100, 1, R8A774A1_PD_3DG_B, R8A774A1_PD_3DG_A },
+};
+
+const struct rcar_sysc_info r8a774a1_sysc_info __initconst = {
+ .areas = r8a774a1_areas,
+ .num_areas = ARRAY_SIZE(r8a774a1_areas),
+};
diff --git a/drivers/soc/renesas/r8a774c0-sysc.c b/drivers/soc/renesas/r8a774c0-sysc.c
new file mode 100644
index 0000000000000000000000000000000000000000..e1ac4c0f66408b25fec8a98052243256017c78bc
--- /dev/null
+++ b/drivers/soc/renesas/r8a774c0-sysc.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2E System Controller
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ *
+ * Based on Renesas R-Car E3 System Controller
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/sys_soc.h>
+
+#include <dt-bindings/power/r8a774c0-sysc.h>
+
+#include "rcar-sysc.h"
+
+static struct rcar_sysc_area r8a774c0_areas[] __initdata = {
+ { "always-on", 0, 0, R8A774C0_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "ca53-scu", 0x140, 0, R8A774C0_PD_CA53_SCU, R8A774C0_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca53-cpu0", 0x200, 0, R8A774C0_PD_CA53_CPU0, R8A774C0_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu1", 0x200, 1, R8A774C0_PD_CA53_CPU1, R8A774C0_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "a3vc", 0x380, 0, R8A774C0_PD_A3VC, R8A774C0_PD_ALWAYS_ON },
+ { "a2vc1", 0x3c0, 1, R8A774C0_PD_A2VC1, R8A774C0_PD_A3VC },
+ { "3dg-a", 0x100, 0, R8A774C0_PD_3DG_A, R8A774C0_PD_ALWAYS_ON },
+ { "3dg-b", 0x100, 1, R8A774C0_PD_3DG_B, R8A774C0_PD_3DG_A },
+};
+
+static void __init rcar_sysc_fix_parent(struct rcar_sysc_area *areas,
+ unsigned int num_areas, u8 id,
+ int new_parent)
+{
+ unsigned int i;
+
+ for (i = 0; i < num_areas; i++)
+ if (areas[i].isr_bit == id) {
+ areas[i].parent = new_parent;
+ return;
+ }
+}
+
+/* Fixups for RZ/G2E ES1.0 revision */
+static const struct soc_device_attribute r8a774c0[] __initconst = {
+ { .soc_id = "r8a774c0", .revision = "ES1.0" },
+ { /* sentinel */ }
+};
+
+static int __init r8a774c0_sysc_init(void)
+{
+ if (soc_device_match(r8a774c0)) {
+ rcar_sysc_fix_parent(r8a774c0_areas,
+ ARRAY_SIZE(r8a774c0_areas),
+ R8A774C0_PD_3DG_A, R8A774C0_PD_3DG_B);
+ rcar_sysc_fix_parent(r8a774c0_areas,
+ ARRAY_SIZE(r8a774c0_areas),
+ R8A774C0_PD_3DG_B, R8A774C0_PD_ALWAYS_ON);
+ }
+
+ return 0;
+}
+
+const struct rcar_sysc_info r8a774c0_sysc_info __initconst = {
+ .init = r8a774c0_sysc_init,
+ .areas = r8a774c0_areas,
+ .num_areas = ARRAY_SIZE(r8a774c0_areas),
+};
diff --git a/drivers/soc/renesas/r8a7779-sysc.c b/drivers/soc/renesas/r8a7779-sysc.c
index 9e8e6b7faa04468495754509b702edb138285027..517aa40fa6e6d493ec42de51e08de67252b2a691 100644
--- a/drivers/soc/renesas/r8a7779-sysc.c
+++ b/drivers/soc/renesas/r8a7779-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car H1 System Controller
*
* Copyright (C) 2016 Glider bvba
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/r8a7790-sysc.c b/drivers/soc/renesas/r8a7790-sysc.c
index 7a567ad0ff73c2c7c68f4dcecb47217ce7e4d8fa..9b5a6bb6215209639e2e39cb28f6d987b27ac89e 100644
--- a/drivers/soc/renesas/r8a7790-sysc.c
+++ b/drivers/soc/renesas/r8a7790-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car H2 System Controller
*
* Copyright (C) 2016 Glider bvba
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/r8a7791-sysc.c b/drivers/soc/renesas/r8a7791-sysc.c
index 03b9f41a34e62f36bad9983f6de1d56778604787..acf545cdebfbe1f20ddeeebac88698e23b33f8d0 100644
--- a/drivers/soc/renesas/r8a7791-sysc.c
+++ b/drivers/soc/renesas/r8a7791-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car M2-W/N System Controller
*
* Copyright (C) 2016 Glider bvba
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/r8a7792-sysc.c b/drivers/soc/renesas/r8a7792-sysc.c
index ca7467d7b7ecf84ed8ff9a04feffb75ec54304ac..05b78525cc430bacacad72e597a15cd1db117cfb 100644
--- a/drivers/soc/renesas/r8a7792-sysc.c
+++ b/drivers/soc/renesas/r8a7792-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car V2H (R8A7792) System Controller
*
* Copyright (C) 2016 Cogent Embedded Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/r8a7794-sysc.c b/drivers/soc/renesas/r8a7794-sysc.c
index c4da2941e06c9468711f8d59f9317e6f1bfaccc1..0d42637fa662099433fb956f23e705b74124c7b9 100644
--- a/drivers/soc/renesas/r8a7794-sysc.c
+++ b/drivers/soc/renesas/r8a7794-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car E2 System Controller
*
* Copyright (C) 2016 Glider bvba
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/r8a7795-sysc.c b/drivers/soc/renesas/r8a7795-sysc.c
index 7412666187b30420235e1ef10d64ce7926c5e7f7..cda27a67de9876afe751df27d1f135af0b3f5247 100644
--- a/drivers/soc/renesas/r8a7795-sysc.c
+++ b/drivers/soc/renesas/r8a7795-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car H3 System Controller
*
* Copyright (C) 2016-2017 Glider bvba
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/r8a7796-sysc.c b/drivers/soc/renesas/r8a7796-sysc.c
index f700c842b9e1d010b8f2c1e947c62e7c95671de0..1b06f868b6e81c798dfb17614ad53e96a6f23f47 100644
--- a/drivers/soc/renesas/r8a7796-sysc.c
+++ b/drivers/soc/renesas/r8a7796-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car M3-W System Controller
*
* Copyright (C) 2016 Glider bvba
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/r8a77970-sysc.c b/drivers/soc/renesas/r8a77970-sysc.c
index caf894f193edcc6446165d2d763c98fd090da540..35b30d6a8958a063cb04e7976bd87ae5a09c5720 100644
--- a/drivers/soc/renesas/r8a77970-sysc.c
+++ b/drivers/soc/renesas/r8a77970-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car V3M System Controller
*
* Copyright (C) 2017 Cogent Embedded Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/r8a77995-sysc.c b/drivers/soc/renesas/r8a77995-sysc.c
index 1b2ef415bbe1cbf7f6adccdf36a52abce3ad22e4..6243aaaf60fbb51cff3a792ac39dfb1b1bd588f5 100644
--- a/drivers/soc/renesas/r8a77995-sysc.c
+++ b/drivers/soc/renesas/r8a77995-sysc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car D3 System Controller
*
* Copyright (C) 2017 Glider bvba
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
*/
#include <linux/bug.h>
diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index d9c1034e70e94d05d4557d98535aeac873aa51a4..d183c381e8dbb6c14ccb26b0eed8e819a9f7be19 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* R-Car Gen1 RESET/WDT, R-Car Gen2, Gen3, and RZ/G RST Driver
*
* Copyright (C) 2016 Glider bvba
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
*/
#include <linux/err.h>
@@ -41,10 +38,14 @@ static const struct rst_config rcar_rst_gen3 __initconst = {
};
static const struct of_device_id rcar_rst_matches[] __initconst = {
- /* RZ/G is handled like R-Car Gen2 */
+ /* RZ/G1 is handled like R-Car Gen2 */
{ .compatible = "renesas,r8a7743-rst", .data = &rcar_rst_gen2 },
+ { .compatible = "renesas,r8a7744-rst", .data = &rcar_rst_gen2 },
{ .compatible = "renesas,r8a7745-rst", .data = &rcar_rst_gen2 },
{ .compatible = "renesas,r8a77470-rst", .data = &rcar_rst_gen2 },
+ /* RZ/G2 is handled like R-Car Gen3 */
+ { .compatible = "renesas,r8a774a1-rst", .data = &rcar_rst_gen3 },
+ { .compatible = "renesas,r8a774c0-rst", .data = &rcar_rst_gen3 },
/* R-Car Gen1 */
{ .compatible = "renesas,r8a7778-reset-wdt", .data = &rcar_rst_gen1 },
{ .compatible = "renesas,r8a7779-reset-wdt", .data = &rcar_rst_gen1 },
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 029188e8be6e95f2b86d30dc6963a94ce01fc3c9..af53363eda0374ceeaaa22d362f2078539f64588 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* R-Car SYSC Power management support
*
* Copyright (C) 2014 Magnus Damm
* Copyright (C) 2015-2017 Glider bvba
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
*/
#include <linux/clk/renesas.h>
@@ -268,6 +265,8 @@ static int __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
static const struct of_device_id rcar_sysc_matches[] __initconst = {
#ifdef CONFIG_SYSC_R8A7743
{ .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info },
+ /* RZ/G1N is identical to RZ/G2M w.r.t. power domains. */
+ { .compatible = "renesas,r8a7744-sysc", .data = &r8a7743_sysc_info },
#endif
#ifdef CONFIG_SYSC_R8A7745
{ .compatible = "renesas,r8a7745-sysc", .data = &r8a7745_sysc_info },
@@ -275,6 +274,12 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = {
#ifdef CONFIG_SYSC_R8A77470
{ .compatible = "renesas,r8a77470-sysc", .data = &r8a77470_sysc_info },
#endif
+#ifdef CONFIG_SYSC_R8A774A1
+ { .compatible = "renesas,r8a774a1-sysc", .data = &r8a774a1_sysc_info },
+#endif
+#ifdef CONFIG_SYSC_R8A774C0
+ { .compatible = "renesas,r8a774c0-sysc", .data = &r8a774c0_sysc_info },
+#endif
#ifdef CONFIG_SYSC_R8A7779
{ .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info },
#endif
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index a22e7cf25e309bb5a4700b4b840c83d240804798..485520a5b295c13e58ab8fe1ac00708b77271fac 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -1,11 +1,8 @@
-/*
+/* SPDX-License-Identifier: GPL-2.0
+ *
* Renesas R-Car System Controller
*
* Copyright (C) 2016 Glider bvba
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
*/
#ifndef __SOC_RENESAS_RCAR_SYSC_H__
#define __SOC_RENESAS_RCAR_SYSC_H__
@@ -52,6 +49,8 @@ struct rcar_sysc_info {
extern const struct rcar_sysc_info r8a7743_sysc_info;
extern const struct rcar_sysc_info r8a7745_sysc_info;
extern const struct rcar_sysc_info r8a77470_sysc_info;
+extern const struct rcar_sysc_info r8a774a1_sysc_info;
+extern const struct rcar_sysc_info r8a774c0_sysc_info;
extern const struct rcar_sysc_info r8a7779_sysc_info;
extern const struct rcar_sysc_info r8a7790_sysc_info;
extern const struct rcar_sysc_info r8a7791_sysc_info;
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index d44d0e687ab8adb3bdcf97537d5ac97aade5c6c6..4af96e668a2f1d69f49c0045f56b3b4ea2be6dbf 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas SoC Identification
*
* Copyright (C) 2014-2016 Glider bvba
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/io.h>
@@ -46,15 +38,24 @@ static const struct renesas_family fam_rmobile __initconst __maybe_unused = {
.reg = 0xe600101c, /* CCCR (Common Chip Code Register) */
};
-static const struct renesas_family fam_rza __initconst __maybe_unused = {
- .name = "RZ/A",
+static const struct renesas_family fam_rza1 __initconst __maybe_unused = {
+ .name = "RZ/A1",
+};
+
+static const struct renesas_family fam_rza2 __initconst __maybe_unused = {
+ .name = "RZ/A2",
};
-static const struct renesas_family fam_rzg __initconst __maybe_unused = {
- .name = "RZ/G",
+static const struct renesas_family fam_rzg1 __initconst __maybe_unused = {
+ .name = "RZ/G1",
.reg = 0xff000044, /* PRR (Product Register) */
};
+static const struct renesas_family fam_rzg2 __initconst __maybe_unused = {
+ .name = "RZ/G2",
+ .reg = 0xfff00044, /* PRR (Product Register) */
+};
+
static const struct renesas_family fam_shmobile __initconst __maybe_unused = {
.name = "SH-Mobile",
.reg = 0xe600101c, /* CCCR (Common Chip Code Register) */
@@ -67,7 +68,12 @@ struct renesas_soc {
};
static const struct renesas_soc soc_rz_a1h __initconst __maybe_unused = {
- .family = &fam_rza,
+ .family = &fam_rza1,
+};
+
+static const struct renesas_soc soc_rz_a2m __initconst __maybe_unused = {
+ .family = &fam_rza2,
+ .id = 0x3b,
};
static const struct renesas_soc soc_rmobile_ape6 __initconst __maybe_unused = {
@@ -81,30 +87,40 @@ static const struct renesas_soc soc_rmobile_a1 __initconst __maybe_unused = {
};
static const struct renesas_soc soc_rz_g1h __initconst __maybe_unused = {
- .family = &fam_rzg,
+ .family = &fam_rzg1,
.id = 0x45,
};
static const struct renesas_soc soc_rz_g1m __initconst __maybe_unused = {
- .family = &fam_rzg,
+ .family = &fam_rzg1,
.id = 0x47,
};
static const struct renesas_soc soc_rz_g1n __initconst __maybe_unused = {
- .family = &fam_rzg,
+ .family = &fam_rzg1,
.id = 0x4b,
};
static const struct renesas_soc soc_rz_g1e __initconst __maybe_unused = {
- .family = &fam_rzg,
+ .family = &fam_rzg1,
.id = 0x4c,
};
static const struct renesas_soc soc_rz_g1c __initconst __maybe_unused = {
- .family = &fam_rzg,
+ .family = &fam_rzg1,
.id = 0x53,
};
+static const struct renesas_soc soc_rz_g2m __initconst __maybe_unused = {
+ .family = &fam_rzg2,
+ .id = 0x52,
+};
+
+static const struct renesas_soc soc_rz_g2e __initconst __maybe_unused = {
+ .family = &fam_rzg2,
+ .id = 0x57,
+};
+
static const struct renesas_soc soc_rcar_m1a __initconst __maybe_unused = {
.family = &fam_rcar_gen1,
};
@@ -184,6 +200,9 @@ static const struct of_device_id renesas_socs[] __initconst = {
#ifdef CONFIG_ARCH_R7S72100
{ .compatible = "renesas,r7s72100", .data = &soc_rz_a1h },
#endif
+#ifdef CONFIG_ARCH_R7S9210
+ { .compatible = "renesas,r7s9210", .data = &soc_rz_a2m },
+#endif
#ifdef CONFIG_ARCH_R8A73A4
{ .compatible = "renesas,r8a73a4", .data = &soc_rmobile_ape6 },
#endif
@@ -205,6 +224,12 @@ static const struct of_device_id renesas_socs[] __initconst = {
#ifdef CONFIG_ARCH_R8A77470
{ .compatible = "renesas,r8a77470", .data = &soc_rz_g1c },
#endif
+#ifdef CONFIG_ARCH_R8A774A1
+ { .compatible = "renesas,r8a774a1", .data = &soc_rz_g2m },
+#endif
+#ifdef CONFIG_ARCH_R8A774C0
+ { .compatible = "renesas,r8a774c0", .data = &soc_rz_g2e },
+#endif
#ifdef CONFIG_ARCH_R8A7778
{ .compatible = "renesas,r8a7778", .data = &soc_rcar_m1a },
#endif
@@ -262,7 +287,7 @@ static int __init renesas_soc_init(void)
void __iomem *chipid = NULL;
struct soc_device *soc_dev;
struct device_node *np;
- unsigned int product;
+ unsigned int product, eshi = 0, eslo;
match = of_match_node(renesas_socs, of_root);
if (!match)
@@ -271,6 +296,31 @@ static int __init renesas_soc_init(void)
soc = match->data;
family = soc->family;
+ np = of_find_compatible_node(NULL, NULL, "renesas,bsid");
+ if (np) {
+ chipid = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (chipid) {
+ product = readl(chipid);
+ iounmap(chipid);
+
+ if (soc->id && ((product >> 16) & 0xff) != soc->id) {
+ pr_warn("SoC mismatch (product = 0x%x)\n",
+ product);
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * TODO: Upper 4 bits of BSID are for chip version, but the
+ * format is not known at this time so we don't know how to
+ * specify eshi and eslo
+ */
+
+ goto done;
+ }
+
/* Try PRR first, then hardcoded fallback */
np = of_find_compatible_node(NULL, NULL, "renesas,prr");
if (np) {
@@ -289,8 +339,11 @@ static int __init renesas_soc_init(void)
pr_warn("SoC mismatch (product = 0x%x)\n", product);
return -ENODEV;
}
+ eshi = ((product >> 4) & 0x0f) + 1;
+ eslo = product & 0xf;
}
+done:
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return -ENOMEM;
@@ -302,10 +355,9 @@ static int __init renesas_soc_init(void)
soc_dev_attr->family = kstrdup_const(family->name, GFP_KERNEL);
soc_dev_attr->soc_id = kstrdup_const(strchr(match->compatible, ',') + 1,
GFP_KERNEL);
- if (chipid)
- soc_dev_attr->revision = kasprintf(GFP_KERNEL, "ES%u.%u",
- ((product >> 4) & 0x0f) + 1,
- product & 0xf);
+ if (eshi)
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "ES%u.%u", eshi,
+ eslo);
pr_info("Detected Renesas %s %s %s\n", soc_dev_attr->family,
soc_dev_attr->soc_id, soc_dev_attr->revision ?: "");
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index acbe63e925d597c270b54a846b54791d6c0e3655..1fa840e3d930dcc3058d272e15b3ed85885c49c8 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -33,6 +33,9 @@
#include <linux/of_address.h>
#include <linux/of_clk.h>
#include <linux/of_platform.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/reboot.h>
@@ -45,6 +48,8 @@
#include <soc/tegra/fuse.h>
#include <soc/tegra/pmc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+
#define PMC_CNTRL 0x0
#define PMC_CNTRL_INTR_POLARITY BIT(17) /* inverts INTR polarity */
#define PMC_CNTRL_CPU_PWRREQ_OE BIT(16) /* CPU pwr req enable */
@@ -65,6 +70,8 @@
#define PWRGATE_STATUS 0x38
+#define PMC_IMPL_E_33V_PWR 0x40
+
#define PMC_PWR_DET 0x48
#define PMC_SCRATCH0_MODE_RECOVERY BIT(31)
@@ -135,6 +142,7 @@ struct tegra_io_pad_soc {
enum tegra_io_pad id;
unsigned int dpd;
unsigned int voltage;
+ const char *name;
};
struct tegra_pmc_regs {
@@ -154,10 +162,14 @@ struct tegra_pmc_soc {
bool has_tsense_reset;
bool has_gpu_clamps;
bool needs_mbist_war;
+ bool has_impl_33v_pwr;
const struct tegra_io_pad_soc *io_pads;
unsigned int num_io_pads;
+ const struct pinctrl_pin_desc *pin_descs;
+ unsigned int num_pin_descs;
+
const struct tegra_pmc_regs *regs;
void (*init)(struct tegra_pmc *pmc);
void (*setup_irq_polarity)(struct tegra_pmc *pmc,
@@ -216,6 +228,8 @@ struct tegra_pmc {
DECLARE_BITMAP(powergates_available, TEGRA_POWERGATE_MAX);
struct mutex powergates_lock;
+
+ struct pinctrl_dev *pctl_dev;
};
static struct tegra_pmc *pmc = &(struct tegra_pmc) {
@@ -919,11 +933,12 @@ tegra_io_pad_find(struct tegra_pmc *pmc, enum tegra_io_pad id)
return NULL;
}
-static int tegra_io_pad_prepare(enum tegra_io_pad id, unsigned long *request,
- unsigned long *status, u32 *mask)
+static int tegra_io_pad_get_dpd_register_bit(enum tegra_io_pad id,
+ unsigned long *request,
+ unsigned long *status,
+ u32 *mask)
{
const struct tegra_io_pad_soc *pad;
- unsigned long rate, value;
pad = tegra_io_pad_find(pmc, id);
if (!pad) {
@@ -944,6 +959,19 @@ static int tegra_io_pad_prepare(enum tegra_io_pad id, unsigned long *request,
*request = pmc->soc->regs->dpd2_req;
}
+ return 0;
+}
+
+static int tegra_io_pad_prepare(enum tegra_io_pad id, unsigned long *request,
+ unsigned long *status, u32 *mask)
+{
+ unsigned long rate, value;
+ int err;
+
+ err = tegra_io_pad_get_dpd_register_bit(id, request, status, mask);
+ if (err)
+ return err;
+
if (pmc->clk) {
rate = clk_get_rate(pmc->clk);
if (!rate) {
@@ -1058,8 +1086,22 @@ int tegra_io_pad_power_disable(enum tegra_io_pad id)
}
EXPORT_SYMBOL(tegra_io_pad_power_disable);
-int tegra_io_pad_set_voltage(enum tegra_io_pad id,
- enum tegra_io_pad_voltage voltage)
+static int tegra_io_pad_is_powered(enum tegra_io_pad id)
+{
+ unsigned long request, status;
+ u32 mask, value;
+ int err;
+
+ err = tegra_io_pad_get_dpd_register_bit(id, &request, &status, &mask);
+ if (err)
+ return err;
+
+ value = tegra_pmc_readl(status);
+
+ return !(value & mask);
+}
+
+static int tegra_io_pad_set_voltage(enum tegra_io_pad id, int voltage)
{
const struct tegra_io_pad_soc *pad;
u32 value;
@@ -1073,20 +1115,31 @@ int tegra_io_pad_set_voltage(enum tegra_io_pad id,
mutex_lock(&pmc->powergates_lock);
- /* write-enable PMC_PWR_DET_VALUE[pad->voltage] */
- value = tegra_pmc_readl(PMC_PWR_DET);
- value |= BIT(pad->voltage);
- tegra_pmc_writel(value, PMC_PWR_DET);
+ if (pmc->soc->has_impl_33v_pwr) {
+ value = tegra_pmc_readl(PMC_IMPL_E_33V_PWR);
- /* update I/O voltage */
- value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
+ if (voltage == TEGRA_IO_PAD_VOLTAGE_1V8)
+ value &= ~BIT(pad->voltage);
+ else
+ value |= BIT(pad->voltage);
- if (voltage == TEGRA_IO_PAD_1800000UV)
- value &= ~BIT(pad->voltage);
- else
+ tegra_pmc_writel(value, PMC_IMPL_E_33V_PWR);
+ } else {
+ /* write-enable PMC_PWR_DET_VALUE[pad->voltage] */
+ value = tegra_pmc_readl(PMC_PWR_DET);
value |= BIT(pad->voltage);
+ tegra_pmc_writel(value, PMC_PWR_DET);
- tegra_pmc_writel(value, PMC_PWR_DET_VALUE);
+ /* update I/O voltage */
+ value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
+
+ if (voltage == TEGRA_IO_PAD_VOLTAGE_1V8)
+ value &= ~BIT(pad->voltage);
+ else
+ value |= BIT(pad->voltage);
+
+ tegra_pmc_writel(value, PMC_PWR_DET_VALUE);
+ }
mutex_unlock(&pmc->powergates_lock);
@@ -1094,9 +1147,8 @@ int tegra_io_pad_set_voltage(enum tegra_io_pad id,
return 0;
}
-EXPORT_SYMBOL(tegra_io_pad_set_voltage);
-int tegra_io_pad_get_voltage(enum tegra_io_pad id)
+static int tegra_io_pad_get_voltage(enum tegra_io_pad id)
{
const struct tegra_io_pad_soc *pad;
u32 value;
@@ -1108,14 +1160,16 @@ int tegra_io_pad_get_voltage(enum tegra_io_pad id)
if (pad->voltage == UINT_MAX)
return -ENOTSUPP;
- value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
+ if (pmc->soc->has_impl_33v_pwr)
+ value = tegra_pmc_readl(PMC_IMPL_E_33V_PWR);
+ else
+ value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
if ((value & BIT(pad->voltage)) == 0)
- return TEGRA_IO_PAD_1800000UV;
+ return TEGRA_IO_PAD_VOLTAGE_1V8;
- return TEGRA_IO_PAD_3300000UV;
+ return TEGRA_IO_PAD_VOLTAGE_3V3;
}
-EXPORT_SYMBOL(tegra_io_pad_get_voltage);
/**
* tegra_io_rail_power_on() - enable power to I/O rail
@@ -1288,7 +1342,7 @@ static void tegra_pmc_init_tsense_reset(struct tegra_pmc *pmc)
if (!pmc->soc->has_tsense_reset)
return;
- np = of_find_node_by_name(pmc->dev->of_node, "i2c-thermtrip");
+ np = of_get_child_by_name(pmc->dev->of_node, "i2c-thermtrip");
if (!np) {
dev_warn(dev, "i2c-thermtrip node not found, %s.\n", disabled);
return;
@@ -1353,6 +1407,142 @@ static void tegra_pmc_init_tsense_reset(struct tegra_pmc *pmc)
of_node_put(np);
}
+static int tegra_io_pad_pinctrl_get_groups_count(struct pinctrl_dev *pctl_dev)
+{
+ return pmc->soc->num_io_pads;
+}
+
+static const char *tegra_io_pad_pinctrl_get_group_name(
+ struct pinctrl_dev *pctl, unsigned int group)
+{
+ return pmc->soc->io_pads[group].name;
+}
+
+static int tegra_io_pad_pinctrl_get_group_pins(struct pinctrl_dev *pctl_dev,
+ unsigned int group,
+ const unsigned int **pins,
+ unsigned int *num_pins)
+{
+ *pins = &pmc->soc->io_pads[group].id;
+ *num_pins = 1;
+ return 0;
+}
+
+static const struct pinctrl_ops tegra_io_pad_pinctrl_ops = {
+ .get_groups_count = tegra_io_pad_pinctrl_get_groups_count,
+ .get_group_name = tegra_io_pad_pinctrl_get_group_name,
+ .get_group_pins = tegra_io_pad_pinctrl_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static int tegra_io_pad_pinconf_get(struct pinctrl_dev *pctl_dev,
+ unsigned int pin, unsigned long *config)
+{
+ const struct tegra_io_pad_soc *pad = tegra_io_pad_find(pmc, pin);
+ enum pin_config_param param = pinconf_to_config_param(*config);
+ int ret;
+ u32 arg;
+
+ if (!pad)
+ return -EINVAL;
+
+ switch (param) {
+ case PIN_CONFIG_POWER_SOURCE:
+ ret = tegra_io_pad_get_voltage(pad->id);
+ if (ret < 0)
+ return ret;
+ arg = ret;
+ break;
+ case PIN_CONFIG_LOW_POWER_MODE:
+ ret = tegra_io_pad_is_powered(pad->id);
+ if (ret < 0)
+ return ret;
+ arg = !ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *config = pinconf_to_config_packed(param, arg);
+
+ return 0;
+}
+
+static int tegra_io_pad_pinconf_set(struct pinctrl_dev *pctl_dev,
+ unsigned int pin, unsigned long *configs,
+ unsigned int num_configs)
+{
+ const struct tegra_io_pad_soc *pad = tegra_io_pad_find(pmc, pin);
+ enum pin_config_param param;
+ unsigned int i;
+ int err;
+ u32 arg;
+
+ if (!pad)
+ return -EINVAL;
+
+ for (i = 0; i < num_configs; ++i) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_LOW_POWER_MODE:
+ if (arg)
+ err = tegra_io_pad_power_disable(pad->id);
+ else
+ err = tegra_io_pad_power_enable(pad->id);
+ if (err)
+ return err;
+ break;
+ case PIN_CONFIG_POWER_SOURCE:
+ if (arg != TEGRA_IO_PAD_VOLTAGE_1V8 &&
+ arg != TEGRA_IO_PAD_VOLTAGE_3V3)
+ return -EINVAL;
+ err = tegra_io_pad_set_voltage(pad->id, arg);
+ if (err)
+ return err;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static const struct pinconf_ops tegra_io_pad_pinconf_ops = {
+ .pin_config_get = tegra_io_pad_pinconf_get,
+ .pin_config_set = tegra_io_pad_pinconf_set,
+ .is_generic = true,
+};
+
+static struct pinctrl_desc tegra_pmc_pctl_desc = {
+ .pctlops = &tegra_io_pad_pinctrl_ops,
+ .confops = &tegra_io_pad_pinconf_ops,
+};
+
+static int tegra_pmc_pinctrl_init(struct tegra_pmc *pmc)
+{
+ int err = 0;
+
+ if (!pmc->soc->num_pin_descs)
+ return 0;
+
+ tegra_pmc_pctl_desc.name = dev_name(pmc->dev);
+ tegra_pmc_pctl_desc.pins = pmc->soc->pin_descs;
+ tegra_pmc_pctl_desc.npins = pmc->soc->num_pin_descs;
+
+ pmc->pctl_dev = devm_pinctrl_register(pmc->dev, &tegra_pmc_pctl_desc,
+ pmc);
+ if (IS_ERR(pmc->pctl_dev)) {
+ err = PTR_ERR(pmc->pctl_dev);
+ dev_err(pmc->dev, "unable to register pinctrl, %d\n", err);
+ }
+
+ return err;
+}
+
static int tegra_pmc_probe(struct platform_device *pdev)
{
void __iomem *base;
@@ -1430,18 +1620,27 @@ static int tegra_pmc_probe(struct platform_device *pdev)
err = register_restart_handler(&tegra_pmc_restart_handler);
if (err) {
- debugfs_remove(pmc->debugfs);
dev_err(&pdev->dev, "unable to register restart handler, %d\n",
err);
- return err;
+ goto cleanup_debugfs;
}
+ err = tegra_pmc_pinctrl_init(pmc);
+ if (err)
+ goto cleanup_restart_handler;
+
mutex_lock(&pmc->powergates_lock);
iounmap(pmc->base);
pmc->base = base;
mutex_unlock(&pmc->powergates_lock);
return 0;
+
+cleanup_restart_handler:
+ unregister_restart_handler(&tegra_pmc_restart_handler);
+cleanup_debugfs:
+ debugfs_remove(pmc->debugfs);
+ return err;
}
#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_ARM)
@@ -1531,6 +1730,8 @@ static const struct tegra_pmc_soc tegra20_pmc_soc = {
.has_gpu_clamps = false,
.num_io_pads = 0,
.io_pads = NULL,
+ .num_pin_descs = 0,
+ .pin_descs = NULL,
.regs = &tegra20_pmc_regs,
.init = tegra20_pmc_init,
.setup_irq_polarity = tegra20_pmc_setup_irq_polarity,
@@ -1567,8 +1768,11 @@ static const struct tegra_pmc_soc tegra30_pmc_soc = {
.cpu_powergates = tegra30_cpu_powergates,
.has_tsense_reset = true,
.has_gpu_clamps = false,
+ .has_impl_33v_pwr = false,
.num_io_pads = 0,
.io_pads = NULL,
+ .num_pin_descs = 0,
+ .pin_descs = NULL,
.regs = &tegra20_pmc_regs,
.init = tegra20_pmc_init,
.setup_irq_polarity = tegra20_pmc_setup_irq_polarity,
@@ -1609,8 +1813,11 @@ static const struct tegra_pmc_soc tegra114_pmc_soc = {
.cpu_powergates = tegra114_cpu_powergates,
.has_tsense_reset = true,
.has_gpu_clamps = false,
+ .has_impl_33v_pwr = false,
.num_io_pads = 0,
.io_pads = NULL,
+ .num_pin_descs = 0,
+ .pin_descs = NULL,
.regs = &tegra20_pmc_regs,
.init = tegra20_pmc_init,
.setup_irq_polarity = tegra20_pmc_setup_irq_polarity,
@@ -1649,37 +1856,59 @@ static const u8 tegra124_cpu_powergates[] = {
TEGRA_POWERGATE_CPU3,
};
+#define TEGRA_IO_PAD(_id, _dpd, _voltage, _name) \
+ ((struct tegra_io_pad_soc) { \
+ .id = (_id), \
+ .dpd = (_dpd), \
+ .voltage = (_voltage), \
+ .name = (_name), \
+ })
+
+#define TEGRA_IO_PIN_DESC(_id, _dpd, _voltage, _name) \
+ ((struct pinctrl_pin_desc) { \
+ .number = (_id), \
+ .name = (_name) \
+ })
+
+#define TEGRA124_IO_PAD_TABLE(_pad) \
+ /* .id .dpd .voltage .name */ \
+ _pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
+ _pad(TEGRA_IO_PAD_BB, 15, UINT_MAX, "bb"), \
+ _pad(TEGRA_IO_PAD_CAM, 36, UINT_MAX, "cam"), \
+ _pad(TEGRA_IO_PAD_COMP, 22, UINT_MAX, "comp"), \
+ _pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
+ _pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csb"), \
+ _pad(TEGRA_IO_PAD_CSIE, 44, UINT_MAX, "cse"), \
+ _pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
+ _pad(TEGRA_IO_PAD_DSIB, 39, UINT_MAX, "dsib"), \
+ _pad(TEGRA_IO_PAD_DSIC, 40, UINT_MAX, "dsic"), \
+ _pad(TEGRA_IO_PAD_DSID, 41, UINT_MAX, "dsid"), \
+ _pad(TEGRA_IO_PAD_HDMI, 28, UINT_MAX, "hdmi"), \
+ _pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
+ _pad(TEGRA_IO_PAD_HV, 38, UINT_MAX, "hv"), \
+ _pad(TEGRA_IO_PAD_LVDS, 57, UINT_MAX, "lvds"), \
+ _pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
+ _pad(TEGRA_IO_PAD_NAND, 13, UINT_MAX, "nand"), \
+ _pad(TEGRA_IO_PAD_PEX_BIAS, 4, UINT_MAX, "pex-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK1, 5, UINT_MAX, "pex-clk1"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
+ _pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
+ _pad(TEGRA_IO_PAD_SDMMC1, 33, UINT_MAX, "sdmmc1"), \
+ _pad(TEGRA_IO_PAD_SDMMC3, 34, UINT_MAX, "sdmmc3"), \
+ _pad(TEGRA_IO_PAD_SDMMC4, 35, UINT_MAX, "sdmmc4"), \
+ _pad(TEGRA_IO_PAD_SYS_DDC, 58, UINT_MAX, "sys_ddc"), \
+ _pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
+ _pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
+ _pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
+ _pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
+ _pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb_bias")
+
static const struct tegra_io_pad_soc tegra124_io_pads[] = {
- { .id = TEGRA_IO_PAD_AUDIO, .dpd = 17, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_BB, .dpd = 15, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CAM, .dpd = 36, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_COMP, .dpd = 22, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIA, .dpd = 0, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIB, .dpd = 1, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIE, .dpd = 44, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSI, .dpd = 2, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSIB, .dpd = 39, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSIC, .dpd = 40, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSID, .dpd = 41, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HDMI, .dpd = 28, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HSIC, .dpd = 19, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HV, .dpd = 38, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_LVDS, .dpd = 57, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_MIPI_BIAS, .dpd = 3, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_NAND, .dpd = 13, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_BIAS, .dpd = 4, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK1, .dpd = 5, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 6, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CNTRL, .dpd = 32, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SDMMC1, .dpd = 33, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SDMMC3, .dpd = 34, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SDMMC4, .dpd = 35, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SYS_DDC, .dpd = 58, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_UART, .dpd = 14, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB0, .dpd = 9, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB1, .dpd = 10, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB2, .dpd = 11, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB_BIAS, .dpd = 12, .voltage = UINT_MAX },
+ TEGRA124_IO_PAD_TABLE(TEGRA_IO_PAD)
+};
+
+static const struct pinctrl_pin_desc tegra124_pin_descs[] = {
+ TEGRA124_IO_PAD_TABLE(TEGRA_IO_PIN_DESC)
};
static const struct tegra_pmc_soc tegra124_pmc_soc = {
@@ -1689,8 +1918,11 @@ static const struct tegra_pmc_soc tegra124_pmc_soc = {
.cpu_powergates = tegra124_cpu_powergates,
.has_tsense_reset = true,
.has_gpu_clamps = true,
+ .has_impl_33v_pwr = false,
.num_io_pads = ARRAY_SIZE(tegra124_io_pads),
.io_pads = tegra124_io_pads,
+ .num_pin_descs = ARRAY_SIZE(tegra124_pin_descs),
+ .pin_descs = tegra124_pin_descs,
.regs = &tegra20_pmc_regs,
.init = tegra20_pmc_init,
.setup_irq_polarity = tegra20_pmc_setup_irq_polarity,
@@ -1730,45 +1962,53 @@ static const u8 tegra210_cpu_powergates[] = {
TEGRA_POWERGATE_CPU3,
};
+#define TEGRA210_IO_PAD_TABLE(_pad) \
+ /* .id .dpd .voltage .name */ \
+ _pad(TEGRA_IO_PAD_AUDIO, 17, 5, "audio"), \
+ _pad(TEGRA_IO_PAD_AUDIO_HV, 61, 18, "audio-hv"), \
+ _pad(TEGRA_IO_PAD_CAM, 36, 10, "cam"), \
+ _pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
+ _pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
+ _pad(TEGRA_IO_PAD_CSIC, 42, UINT_MAX, "csic"), \
+ _pad(TEGRA_IO_PAD_CSID, 43, UINT_MAX, "csid"), \
+ _pad(TEGRA_IO_PAD_CSIE, 44, UINT_MAX, "csie"), \
+ _pad(TEGRA_IO_PAD_CSIF, 45, UINT_MAX, "csif"), \
+ _pad(TEGRA_IO_PAD_DBG, 25, 19, "dbg"), \
+ _pad(TEGRA_IO_PAD_DEBUG_NONAO, 26, UINT_MAX, "debug-nonao"), \
+ _pad(TEGRA_IO_PAD_DMIC, 50, 20, "dmic"), \
+ _pad(TEGRA_IO_PAD_DP, 51, UINT_MAX, "dp"), \
+ _pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
+ _pad(TEGRA_IO_PAD_DSIB, 39, UINT_MAX, "dsib"), \
+ _pad(TEGRA_IO_PAD_DSIC, 40, UINT_MAX, "dsic"), \
+ _pad(TEGRA_IO_PAD_DSID, 41, UINT_MAX, "dsid"), \
+ _pad(TEGRA_IO_PAD_EMMC, 35, UINT_MAX, "emmc"), \
+ _pad(TEGRA_IO_PAD_EMMC2, 37, UINT_MAX, "emmc2"), \
+ _pad(TEGRA_IO_PAD_GPIO, 27, 21, "gpio"), \
+ _pad(TEGRA_IO_PAD_HDMI, 28, UINT_MAX, "hdmi"), \
+ _pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
+ _pad(TEGRA_IO_PAD_LVDS, 57, UINT_MAX, "lvds"), \
+ _pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_BIAS, 4, UINT_MAX, "pex-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK1, 5, UINT_MAX, "pex-clk1"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
+ _pad(TEGRA_IO_PAD_PEX_CNTRL, UINT_MAX, 11, "pex-cntrl"), \
+ _pad(TEGRA_IO_PAD_SDMMC1, 33, 12, "sdmmc1"), \
+ _pad(TEGRA_IO_PAD_SDMMC3, 34, 13, "sdmmc3"), \
+ _pad(TEGRA_IO_PAD_SPI, 46, 22, "spi"), \
+ _pad(TEGRA_IO_PAD_SPI_HV, 47, 23, "spi-hv"), \
+ _pad(TEGRA_IO_PAD_UART, 14, 2, "uart"), \
+ _pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
+ _pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
+ _pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
+ _pad(TEGRA_IO_PAD_USB3, 18, UINT_MAX, "usb3"), \
+ _pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb-bias")
+
static const struct tegra_io_pad_soc tegra210_io_pads[] = {
- { .id = TEGRA_IO_PAD_AUDIO, .dpd = 17, .voltage = 5 },
- { .id = TEGRA_IO_PAD_AUDIO_HV, .dpd = 61, .voltage = 18 },
- { .id = TEGRA_IO_PAD_CAM, .dpd = 36, .voltage = 10 },
- { .id = TEGRA_IO_PAD_CSIA, .dpd = 0, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIB, .dpd = 1, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIC, .dpd = 42, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSID, .dpd = 43, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIE, .dpd = 44, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIF, .dpd = 45, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DBG, .dpd = 25, .voltage = 19 },
- { .id = TEGRA_IO_PAD_DEBUG_NONAO, .dpd = 26, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DMIC, .dpd = 50, .voltage = 20 },
- { .id = TEGRA_IO_PAD_DP, .dpd = 51, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSI, .dpd = 2, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSIB, .dpd = 39, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSIC, .dpd = 40, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSID, .dpd = 41, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_EMMC, .dpd = 35, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_EMMC2, .dpd = 37, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_GPIO, .dpd = 27, .voltage = 21 },
- { .id = TEGRA_IO_PAD_HDMI, .dpd = 28, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HSIC, .dpd = 19, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_LVDS, .dpd = 57, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_MIPI_BIAS, .dpd = 3, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_BIAS, .dpd = 4, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK1, .dpd = 5, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 6, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CNTRL, .dpd = UINT_MAX, .voltage = 11 },
- { .id = TEGRA_IO_PAD_SDMMC1, .dpd = 33, .voltage = 12 },
- { .id = TEGRA_IO_PAD_SDMMC3, .dpd = 34, .voltage = 13 },
- { .id = TEGRA_IO_PAD_SPI, .dpd = 46, .voltage = 22 },
- { .id = TEGRA_IO_PAD_SPI_HV, .dpd = 47, .voltage = 23 },
- { .id = TEGRA_IO_PAD_UART, .dpd = 14, .voltage = 2 },
- { .id = TEGRA_IO_PAD_USB0, .dpd = 9, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB1, .dpd = 10, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB2, .dpd = 11, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB3, .dpd = 18, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB_BIAS, .dpd = 12, .voltage = UINT_MAX },
+ TEGRA210_IO_PAD_TABLE(TEGRA_IO_PAD)
+};
+
+static const struct pinctrl_pin_desc tegra210_pin_descs[] = {
+ TEGRA210_IO_PAD_TABLE(TEGRA_IO_PIN_DESC)
};
static const struct tegra_pmc_soc tegra210_pmc_soc = {
@@ -1778,52 +2018,64 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = {
.cpu_powergates = tegra210_cpu_powergates,
.has_tsense_reset = true,
.has_gpu_clamps = true,
+ .has_impl_33v_pwr = false,
.needs_mbist_war = true,
.num_io_pads = ARRAY_SIZE(tegra210_io_pads),
.io_pads = tegra210_io_pads,
+ .num_pin_descs = ARRAY_SIZE(tegra210_pin_descs),
+ .pin_descs = tegra210_pin_descs,
.regs = &tegra20_pmc_regs,
.init = tegra20_pmc_init,
.setup_irq_polarity = tegra20_pmc_setup_irq_polarity,
};
+#define TEGRA186_IO_PAD_TABLE(_pad) \
+ /* .id .dpd .voltage .name */ \
+ _pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
+ _pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
+ _pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
+ _pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK_BIAS, 4, UINT_MAX, "pex-clk-bias"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK3, 5, UINT_MAX, "pex-clk3"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
+ _pad(TEGRA_IO_PAD_PEX_CLK1, 7, UINT_MAX, "pex-clk1"), \
+ _pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
+ _pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
+ _pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
+ _pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb-bias"), \
+ _pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
+ _pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
+ _pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
+ _pad(TEGRA_IO_PAD_DBG, 25, UINT_MAX, "dbg"), \
+ _pad(TEGRA_IO_PAD_HDMI_DP0, 28, UINT_MAX, "hdmi-dp0"), \
+ _pad(TEGRA_IO_PAD_HDMI_DP1, 29, UINT_MAX, "hdmi-dp1"), \
+ _pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
+ _pad(TEGRA_IO_PAD_SDMMC2_HV, 34, 5, "sdmmc2-hv"), \
+ _pad(TEGRA_IO_PAD_SDMMC4, 36, UINT_MAX, "sdmmc4"), \
+ _pad(TEGRA_IO_PAD_CAM, 38, UINT_MAX, "cam"), \
+ _pad(TEGRA_IO_PAD_DSIB, 40, UINT_MAX, "dsib"), \
+ _pad(TEGRA_IO_PAD_DSIC, 41, UINT_MAX, "dsic"), \
+ _pad(TEGRA_IO_PAD_DSID, 42, UINT_MAX, "dsid"), \
+ _pad(TEGRA_IO_PAD_CSIC, 43, UINT_MAX, "csic"), \
+ _pad(TEGRA_IO_PAD_CSID, 44, UINT_MAX, "csid"), \
+ _pad(TEGRA_IO_PAD_CSIE, 45, UINT_MAX, "csie"), \
+ _pad(TEGRA_IO_PAD_CSIF, 46, UINT_MAX, "csif"), \
+ _pad(TEGRA_IO_PAD_SPI, 47, UINT_MAX, "spi"), \
+ _pad(TEGRA_IO_PAD_UFS, 49, UINT_MAX, "ufs"), \
+ _pad(TEGRA_IO_PAD_DMIC_HV, 52, 2, "dmic-hv"), \
+ _pad(TEGRA_IO_PAD_EDP, 53, UINT_MAX, "edp"), \
+ _pad(TEGRA_IO_PAD_SDMMC1_HV, 55, 4, "sdmmc1-hv"), \
+ _pad(TEGRA_IO_PAD_SDMMC3_HV, 56, 6, "sdmmc3-hv"), \
+ _pad(TEGRA_IO_PAD_CONN, 60, UINT_MAX, "conn"), \
+ _pad(TEGRA_IO_PAD_AUDIO_HV, 61, 1, "audio-hv"), \
+ _pad(TEGRA_IO_PAD_AO_HV, UINT_MAX, 0, "ao-hv")
+
static const struct tegra_io_pad_soc tegra186_io_pads[] = {
- { .id = TEGRA_IO_PAD_CSIA, .dpd = 0, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIB, .dpd = 1, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSI, .dpd = 2, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_MIPI_BIAS, .dpd = 3, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK_BIAS, .dpd = 4, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK3, .dpd = 5, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 6, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CLK1, .dpd = 7, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB0, .dpd = 9, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB1, .dpd = 10, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB2, .dpd = 11, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_USB_BIAS, .dpd = 12, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_UART, .dpd = 14, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_AUDIO, .dpd = 17, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HSIC, .dpd = 19, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DBG, .dpd = 25, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HDMI_DP0, .dpd = 28, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_HDMI_DP1, .dpd = 29, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_PEX_CNTRL, .dpd = 32, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SDMMC2_HV, .dpd = 34, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SDMMC4, .dpd = 36, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CAM, .dpd = 38, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSIB, .dpd = 40, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSIC, .dpd = 41, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DSID, .dpd = 42, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIC, .dpd = 43, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSID, .dpd = 44, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIE, .dpd = 45, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CSIF, .dpd = 46, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SPI, .dpd = 47, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_UFS, .dpd = 49, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_DMIC_HV, .dpd = 52, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_EDP, .dpd = 53, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SDMMC1_HV, .dpd = 55, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_SDMMC3_HV, .dpd = 56, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_CONN, .dpd = 60, .voltage = UINT_MAX },
- { .id = TEGRA_IO_PAD_AUDIO_HV, .dpd = 61, .voltage = UINT_MAX },
+ TEGRA186_IO_PAD_TABLE(TEGRA_IO_PAD)
+};
+
+static const struct pinctrl_pin_desc tegra186_pin_descs[] = {
+ TEGRA186_IO_PAD_TABLE(TEGRA_IO_PIN_DESC)
};
static const struct tegra_pmc_regs tegra186_pmc_regs = {
@@ -1876,8 +2128,11 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = {
.cpu_powergates = NULL,
.has_tsense_reset = false,
.has_gpu_clamps = false,
+ .has_impl_33v_pwr = true,
.num_io_pads = ARRAY_SIZE(tegra186_io_pads),
.io_pads = tegra186_io_pads,
+ .num_pin_descs = ARRAY_SIZE(tegra186_pin_descs),
+ .pin_descs = tegra186_pin_descs,
.regs = &tegra186_pmc_regs,
.init = NULL,
.setup_irq_polarity = tegra186_pmc_setup_irq_polarity,
diff --git a/drivers/soc/ti/knav_dma.c b/drivers/soc/ti/knav_dma.c
index bbd4e5bc8707ff4601a39783f74ec94fd822ea0b..e05ab16d9a9e3c10224e93745f57f1d477616a22 100644
--- a/drivers/soc/ti/knav_dma.c
+++ b/drivers/soc/ti/knav_dma.c
@@ -438,7 +438,7 @@ void *knav_dma_open_channel(struct device *dev, const char *name,
chan_num = of_channel_match_helper(dev->of_node, name, &instance);
if (chan_num < 0) {
- dev_err(kdev->dev, "No DMA instace with name %s\n", name);
+ dev_err(kdev->dev, "No DMA instance with name %s\n", name);
return (void *)-EINVAL;
}
@@ -461,7 +461,7 @@ void *knav_dma_open_channel(struct device *dev, const char *name,
}
}
if (!found) {
- dev_err(kdev->dev, "No DMA instace with name %s\n", instance);
+ dev_err(kdev->dev, "No DMA instance with name %s\n", instance);
return (void *)-EINVAL;
}
diff --git a/drivers/soc/ti/knav_qmss.h b/drivers/soc/ti/knav_qmss.h
index 3efc47e82973b43ff7431bdacad428aea757bffc..7c128132799e0cd355c7bae1298d5a776b6c8ec9 100644
--- a/drivers/soc/ti/knav_qmss.h
+++ b/drivers/soc/ti/knav_qmss.h
@@ -240,14 +240,14 @@ struct knav_pool {
};
/**
- * struct knav_queue_inst: qmss queue instace properties
+ * struct knav_queue_inst: qmss queue instance properties
* @descs: descriptor pointer
* @desc_head, desc_tail, desc_count: descriptor counters
* @acc: accumulator channel pointer
* @kdev: qmss device pointer
* @range: range info
* @qmgr: queue manager info
- * @id: queue instace id
+ * @id: queue instance id
* @irq_num: irq line number
* @notify_needed: notifier needed based on queue type
* @num_notifiers: total notifiers
@@ -274,7 +274,7 @@ struct knav_queue_inst {
/**
* struct knav_queue: qmss queue properties
* @reg_push, reg_pop, reg_peek: push, pop queue registers
- * @inst: qmss queue instace properties
+ * @inst: qmss queue instance properties
* @notifier_fn: notifier function
* @notifier_fn_arg: notifier function argument
* @notifier_enabled: notier enabled for a give queue
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index e1aafe842d660bb11b1146133105f37bff24873e..34dce850067b9e9c379274ef8b3c91da4bb42ef0 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -696,7 +696,7 @@ static int __init optee_driver_init(void)
return -ENODEV;
np = of_find_matching_node(fw_np, optee_match);
- if (!np)
+ if (!np || !of_device_is_available(np))
return -ENODEV;
optee = optee_probe(np);
diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
index dd46b758852aa9ba2866348e6f973da3447b3623..7b2bb4c500580099a2f6e443da6fab9e4db7ae00 100644
--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -38,15 +38,13 @@ static DEFINE_SPINLOCK(driver_lock);
static struct class *tee_class;
static dev_t tee_devt;
-static int tee_open(struct inode *inode, struct file *filp)
+static struct tee_context *teedev_open(struct tee_device *teedev)
{
int rc;
- struct tee_device *teedev;
struct tee_context *ctx;
- teedev = container_of(inode->i_cdev, struct tee_device, cdev);
if (!tee_device_get(teedev))
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx) {
@@ -57,16 +55,16 @@ static int tee_open(struct inode *inode, struct file *filp)
kref_init(&ctx->refcount);
ctx->teedev = teedev;
INIT_LIST_HEAD(&ctx->list_shm);
- filp->private_data = ctx;
rc = teedev->desc->ops->open(ctx);
if (rc)
goto err;
- return 0;
+ return ctx;
err:
kfree(ctx);
tee_device_put(teedev);
- return rc;
+ return ERR_PTR(rc);
+
}
void teedev_ctx_get(struct tee_context *ctx)
@@ -100,6 +98,18 @@ static void teedev_close_context(struct tee_context *ctx)
teedev_ctx_put(ctx);
}
+static int tee_open(struct inode *inode, struct file *filp)
+{
+ struct tee_context *ctx;
+
+ ctx = teedev_open(container_of(inode->i_cdev, struct tee_device, cdev));
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ filp->private_data = ctx;
+ return 0;
+}
+
static int tee_release(struct inode *inode, struct file *filp)
{
teedev_close_context(filp->private_data);
@@ -928,6 +938,95 @@ void *tee_get_drvdata(struct tee_device *teedev)
}
EXPORT_SYMBOL_GPL(tee_get_drvdata);
+struct match_dev_data {
+ struct tee_ioctl_version_data *vers;
+ const void *data;
+ int (*match)(struct tee_ioctl_version_data *, const void *);
+};
+
+static int match_dev(struct device *dev, const void *data)
+{
+ const struct match_dev_data *match_data = data;
+ struct tee_device *teedev = container_of(dev, struct tee_device, dev);
+
+ teedev->desc->ops->get_version(teedev, match_data->vers);
+ return match_data->match(match_data->vers, match_data->data);
+}
+
+struct tee_context *
+tee_client_open_context(struct tee_context *start,
+ int (*match)(struct tee_ioctl_version_data *,
+ const void *),
+ const void *data, struct tee_ioctl_version_data *vers)
+{
+ struct device *dev = NULL;
+ struct device *put_dev = NULL;
+ struct tee_context *ctx = NULL;
+ struct tee_ioctl_version_data v;
+ struct match_dev_data match_data = { vers ? vers : &v, data, match };
+
+ if (start)
+ dev = &start->teedev->dev;
+
+ do {
+ dev = class_find_device(tee_class, dev, &match_data, match_dev);
+ if (!dev) {
+ ctx = ERR_PTR(-ENOENT);
+ break;
+ }
+
+ put_device(put_dev);
+ put_dev = dev;
+
+ ctx = teedev_open(container_of(dev, struct tee_device, dev));
+ } while (IS_ERR(ctx) && PTR_ERR(ctx) != -ENOMEM);
+
+ put_device(put_dev);
+ return ctx;
+}
+EXPORT_SYMBOL_GPL(tee_client_open_context);
+
+void tee_client_close_context(struct tee_context *ctx)
+{
+ teedev_close_context(ctx);
+}
+EXPORT_SYMBOL_GPL(tee_client_close_context);
+
+void tee_client_get_version(struct tee_context *ctx,
+ struct tee_ioctl_version_data *vers)
+{
+ ctx->teedev->desc->ops->get_version(ctx->teedev, vers);
+}
+EXPORT_SYMBOL_GPL(tee_client_get_version);
+
+int tee_client_open_session(struct tee_context *ctx,
+ struct tee_ioctl_open_session_arg *arg,
+ struct tee_param *param)
+{
+ if (!ctx->teedev->desc->ops->open_session)
+ return -EINVAL;
+ return ctx->teedev->desc->ops->open_session(ctx, arg, param);
+}
+EXPORT_SYMBOL_GPL(tee_client_open_session);
+
+int tee_client_close_session(struct tee_context *ctx, u32 session)
+{
+ if (!ctx->teedev->desc->ops->close_session)
+ return -EINVAL;
+ return ctx->teedev->desc->ops->close_session(ctx, session);
+}
+EXPORT_SYMBOL_GPL(tee_client_close_session);
+
+int tee_client_invoke_func(struct tee_context *ctx,
+ struct tee_ioctl_invoke_arg *arg,
+ struct tee_param *param)
+{
+ if (!ctx->teedev->desc->ops->invoke_func)
+ return -EINVAL;
+ return ctx->teedev->desc->ops->invoke_func(ctx, arg, param);
+}
+EXPORT_SYMBOL_GPL(tee_client_invoke_func);
+
static int __init tee_init(void)
{
int rc;
diff --git a/include/dt-bindings/clock/xlnx,zynqmp-clk.h b/include/dt-bindings/clock/xlnx,zynqmp-clk.h
new file mode 100644
index 0000000000000000000000000000000000000000..4aebe6e2049e9337b6370c99f6c8ad1d08d33753
--- /dev/null
+++ b/include/dt-bindings/clock/xlnx,zynqmp-clk.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ * Copyright (C) 2014-2018 Xilinx, Inc.
+ *
+ */
+
+#ifndef _DT_BINDINGS_CLK_ZYNQMP_H
+#define _DT_BINDINGS_CLK_ZYNQMP_H
+
+#define IOPLL 0
+#define RPLL 1
+#define APLL 2
+#define DPLL 3
+#define VPLL 4
+#define IOPLL_TO_FPD 5
+#define RPLL_TO_FPD 6
+#define APLL_TO_LPD 7
+#define DPLL_TO_LPD 8
+#define VPLL_TO_LPD 9
+#define ACPU 10
+#define ACPU_HALF 11
+#define DBF_FPD 12
+#define DBF_LPD 13
+#define DBG_TRACE 14
+#define DBG_TSTMP 15
+#define DP_VIDEO_REF 16
+#define DP_AUDIO_REF 17
+#define DP_STC_REF 18
+#define GDMA_REF 19
+#define DPDMA_REF 20
+#define DDR_REF 21
+#define SATA_REF 22
+#define PCIE_REF 23
+#define GPU_REF 24
+#define GPU_PP0_REF 25
+#define GPU_PP1_REF 26
+#define TOPSW_MAIN 27
+#define TOPSW_LSBUS 28
+#define GTGREF0_REF 29
+#define LPD_SWITCH 30
+#define LPD_LSBUS 31
+#define USB0_BUS_REF 32
+#define USB1_BUS_REF 33
+#define USB3_DUAL_REF 34
+#define USB0 35
+#define USB1 36
+#define CPU_R5 37
+#define CPU_R5_CORE 38
+#define CSU_SPB 39
+#define CSU_PLL 40
+#define PCAP 41
+#define IOU_SWITCH 42
+#define GEM_TSU_REF 43
+#define GEM_TSU 44
+#define GEM0_REF 45
+#define GEM1_REF 46
+#define GEM2_REF 47
+#define GEM3_REF 48
+#define GEM0_TX 49
+#define GEM1_TX 50
+#define GEM2_TX 51
+#define GEM3_TX 52
+#define QSPI_REF 53
+#define SDIO0_REF 54
+#define SDIO1_REF 55
+#define UART0_REF 56
+#define UART1_REF 57
+#define SPI0_REF 58
+#define SPI1_REF 59
+#define NAND_REF 60
+#define I2C0_REF 61
+#define I2C1_REF 62
+#define CAN0_REF 63
+#define CAN1_REF 64
+#define CAN0 65
+#define CAN1 66
+#define DLL_REF 67
+#define ADMA_REF 68
+#define TIMESTAMP_REF 69
+#define AMS_REF 70
+#define PL0_REF 71
+#define PL1_REF 72
+#define PL2_REF 73
+#define PL3_REF 74
+#define WDT 75
+#define IOPLL_INT 76
+#define IOPLL_PRE_SRC 77
+#define IOPLL_HALF 78
+#define IOPLL_INT_MUX 79
+#define IOPLL_POST_SRC 80
+#define RPLL_INT 81
+#define RPLL_PRE_SRC 82
+#define RPLL_HALF 83
+#define RPLL_INT_MUX 84
+#define RPLL_POST_SRC 85
+#define APLL_INT 86
+#define APLL_PRE_SRC 87
+#define APLL_HALF 88
+#define APLL_INT_MUX 89
+#define APLL_POST_SRC 90
+#define DPLL_INT 91
+#define DPLL_PRE_SRC 92
+#define DPLL_HALF 93
+#define DPLL_INT_MUX 94
+#define DPLL_POST_SRC 95
+#define VPLL_INT 96
+#define VPLL_PRE_SRC 97
+#define VPLL_HALF 98
+#define VPLL_INT_MUX 99
+#define VPLL_POST_SRC 100
+#define CAN0_MIO 101
+#define CAN1_MIO 102
+
+#endif
diff --git a/include/dt-bindings/power/r8a7744-sysc.h b/include/dt-bindings/power/r8a7744-sysc.h
new file mode 100644
index 0000000000000000000000000000000000000000..8b6529778f98e5cb81ed832bfb3f3b4b2c7ea166
--- /dev/null
+++ b/include/dt-bindings/power/r8a7744-sysc.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7744_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7744_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ *
+ * Note that RZ/G1N is identical to RZ/G2M w.r.t. power domains.
+ */
+
+#define R8A7744_PD_CA15_CPU0 0
+#define R8A7744_PD_CA15_CPU1 1
+#define R8A7744_PD_CA15_SCU 12
+#define R8A7744_PD_SGX 20
+
+/* Always-on power area */
+#define R8A7744_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A7744_SYSC_H__ */
diff --git a/include/dt-bindings/power/r8a774a1-sysc.h b/include/dt-bindings/power/r8a774a1-sysc.h
new file mode 100644
index 0000000000000000000000000000000000000000..580f431cd32eea4a206c08b7b5b7ddc2fcf532b6
--- /dev/null
+++ b/include/dt-bindings/power/r8a774a1-sysc.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A774A1_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A774A1_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A774A1_PD_CA57_CPU0 0
+#define R8A774A1_PD_CA57_CPU1 1
+#define R8A774A1_PD_CA53_CPU0 5
+#define R8A774A1_PD_CA53_CPU1 6
+#define R8A774A1_PD_CA53_CPU2 7
+#define R8A774A1_PD_CA53_CPU3 8
+#define R8A774A1_PD_CA57_SCU 12
+#define R8A774A1_PD_A3VC 14
+#define R8A774A1_PD_3DG_A 17
+#define R8A774A1_PD_3DG_B 18
+#define R8A774A1_PD_CA53_SCU 21
+#define R8A774A1_PD_A2VC0 25
+#define R8A774A1_PD_A2VC1 26
+
+/* Always-on power area */
+#define R8A774A1_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A774A1_SYSC_H__ */
diff --git a/include/dt-bindings/power/r8a774c0-sysc.h b/include/dt-bindings/power/r8a774c0-sysc.h
new file mode 100644
index 0000000000000000000000000000000000000000..9922d4c6f87d584a9981a485532677efd929ad49
--- /dev/null
+++ b/include/dt-bindings/power/r8a774c0-sysc.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A774C0_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A774C0_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A774C0_PD_CA53_CPU0 5
+#define R8A774C0_PD_CA53_CPU1 6
+#define R8A774C0_PD_A3VC 14
+#define R8A774C0_PD_3DG_A 17
+#define R8A774C0_PD_3DG_B 18
+#define R8A774C0_PD_CA53_SCU 21
+#define R8A774C0_PD_A2VC1 26
+
+/* Always-on power area */
+#define R8A774C0_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A774C0_SYSC_H__ */
diff --git a/include/dt-bindings/reset/qcom,sdm845-pdc.h b/include/dt-bindings/reset/qcom,sdm845-pdc.h
new file mode 100644
index 0000000000000000000000000000000000000000..53c37f9c319a9728275d5123914757ae1977bf77
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,sdm845-pdc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_RESET_PDC_SDM_845_H
+#define _DT_BINDINGS_RESET_PDC_SDM_845_H
+
+#define PDC_APPS_SYNC_RESET 0
+#define PDC_SP_SYNC_RESET 1
+#define PDC_AUDIO_SYNC_RESET 2
+#define PDC_SENSORS_SYNC_RESET 3
+#define PDC_AOP_SYNC_RESET 4
+#define PDC_DEBUG_SYNC_RESET 5
+#define PDC_GPU_SYNC_RESET 6
+#define PDC_DISPLAY_SYNC_RESET 7
+#define PDC_COMPUTE_SYNC_RESET 8
+#define PDC_MODEM_SYNC_RESET 9
+
+#endif
diff --git a/include/linux/firmware/imx/ipc.h b/include/linux/firmware/imx/ipc.h
new file mode 100644
index 0000000000000000000000000000000000000000..6312c8cb084a3be32490fe9cbc1552d4628074e7
--- /dev/null
+++ b/include/linux/firmware/imx/ipc.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ *
+ * Header file for the IPC implementation.
+ */
+
+#ifndef _SC_IPC_H
+#define _SC_IPC_H
+
+#include <linux/device.h>
+#include <linux/types.h>
+
+#define IMX_SC_RPC_VERSION 1
+#define IMX_SC_RPC_MAX_MSG 8
+
+struct imx_sc_ipc;
+
+enum imx_sc_rpc_svc {
+ IMX_SC_RPC_SVC_UNKNOWN = 0,
+ IMX_SC_RPC_SVC_RETURN = 1,
+ IMX_SC_RPC_SVC_PM = 2,
+ IMX_SC_RPC_SVC_RM = 3,
+ IMX_SC_RPC_SVC_TIMER = 5,
+ IMX_SC_RPC_SVC_PAD = 6,
+ IMX_SC_RPC_SVC_MISC = 7,
+ IMX_SC_RPC_SVC_IRQ = 8,
+ IMX_SC_RPC_SVC_ABORT = 9
+};
+
+struct imx_sc_rpc_msg {
+ uint8_t ver;
+ uint8_t size;
+ uint8_t svc;
+ uint8_t func;
+};
+
+/*
+ * This is an function to send an RPC message over an IPC channel.
+ * It is called by client-side SCFW API function shims.
+ *
+ * @param[in] ipc IPC handle
+ * @param[in,out] msg handle to a message
+ * @param[in] have_resp response flag
+ *
+ * If have_resp is true then this function waits for a response
+ * and returns the result in msg.
+ */
+int imx_scu_call_rpc(struct imx_sc_ipc *ipc, void *msg, bool have_resp);
+
+/*
+ * This function gets the default ipc handle used by SCU
+ *
+ * @param[out] ipc sc ipc handle
+ *
+ * @return Returns an error code (0 = success, failed if < 0)
+ */
+int imx_scu_get_handle(struct imx_sc_ipc **ipc);
+#endif /* _SC_IPC_H */
diff --git a/include/linux/firmware/imx/sci.h b/include/linux/firmware/imx/sci.h
new file mode 100644
index 0000000000000000000000000000000000000000..29ada609de030759d48750f2ad8ce307e55c8996
--- /dev/null
+++ b/include/linux/firmware/imx/sci.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Header file containing the public System Controller Interface (SCI)
+ * definitions.
+ */
+
+#ifndef _SC_SCI_H
+#define _SC_SCI_H
+
+#include <linux/firmware/imx/ipc.h>
+#include <linux/firmware/imx/types.h>
+
+#include <linux/firmware/imx/svc/misc.h>
+#endif /* _SC_SCI_H */
diff --git a/include/linux/firmware/imx/svc/misc.h b/include/linux/firmware/imx/svc/misc.h
new file mode 100644
index 0000000000000000000000000000000000000000..e21c49aba92fe3cd0b0c1d29b8fb3c0de44910e2
--- /dev/null
+++ b/include/linux/firmware/imx/svc/misc.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Header file containing the public API for the System Controller (SC)
+ * Miscellaneous (MISC) function.
+ *
+ * MISC_SVC (SVC) Miscellaneous Service
+ *
+ * Module for the Miscellaneous (MISC) service.
+ */
+
+#ifndef _SC_MISC_API_H
+#define _SC_MISC_API_H
+
+#include <linux/firmware/imx/sci.h>
+
+/*
+ * This type is used to indicate RPC MISC function calls.
+ */
+enum imx_misc_func {
+ IMX_SC_MISC_FUNC_UNKNOWN = 0,
+ IMX_SC_MISC_FUNC_SET_CONTROL = 1,
+ IMX_SC_MISC_FUNC_GET_CONTROL = 2,
+ IMX_SC_MISC_FUNC_SET_MAX_DMA_GROUP = 4,
+ IMX_SC_MISC_FUNC_SET_DMA_GROUP = 5,
+ IMX_SC_MISC_FUNC_SECO_IMAGE_LOAD = 8,
+ IMX_SC_MISC_FUNC_SECO_AUTHENTICATE = 9,
+ IMX_SC_MISC_FUNC_DEBUG_OUT = 10,
+ IMX_SC_MISC_FUNC_WAVEFORM_CAPTURE = 6,
+ IMX_SC_MISC_FUNC_BUILD_INFO = 15,
+ IMX_SC_MISC_FUNC_UNIQUE_ID = 19,
+ IMX_SC_MISC_FUNC_SET_ARI = 3,
+ IMX_SC_MISC_FUNC_BOOT_STATUS = 7,
+ IMX_SC_MISC_FUNC_BOOT_DONE = 14,
+ IMX_SC_MISC_FUNC_OTP_FUSE_READ = 11,
+ IMX_SC_MISC_FUNC_OTP_FUSE_WRITE = 17,
+ IMX_SC_MISC_FUNC_SET_TEMP = 12,
+ IMX_SC_MISC_FUNC_GET_TEMP = 13,
+ IMX_SC_MISC_FUNC_GET_BOOT_DEV = 16,
+ IMX_SC_MISC_FUNC_GET_BUTTON_STATUS = 18,
+};
+
+/*
+ * Control Functions
+ */
+
+int imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
+ u8 ctrl, u32 val);
+
+int imx_sc_misc_get_control(struct imx_sc_ipc *ipc, u32 resource,
+ u8 ctrl, u32 *val);
+
+#endif /* _SC_MISC_API_H */
diff --git a/include/linux/firmware/imx/types.h b/include/linux/firmware/imx/types.h
new file mode 100644
index 0000000000000000000000000000000000000000..9cbf0c4a6069e520390d68e8bf7168141941c9a5
--- /dev/null
+++ b/include/linux/firmware/imx/types.h
@@ -0,0 +1,617 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Header file containing types used across multiple service APIs.
+ */
+
+#ifndef _SC_TYPES_H
+#define _SC_TYPES_H
+
+/*
+ * This type is used to indicate a resource. Resources include peripherals
+ * and bus masters (but not memory regions). Note items from list should
+ * never be changed or removed (only added to at the end of the list).
+ */
+enum imx_sc_rsrc {
+ IMX_SC_R_A53 = 0,
+ IMX_SC_R_A53_0 = 1,
+ IMX_SC_R_A53_1 = 2,
+ IMX_SC_R_A53_2 = 3,
+ IMX_SC_R_A53_3 = 4,
+ IMX_SC_R_A72 = 5,
+ IMX_SC_R_A72_0 = 6,
+ IMX_SC_R_A72_1 = 7,
+ IMX_SC_R_A72_2 = 8,
+ IMX_SC_R_A72_3 = 9,
+ IMX_SC_R_CCI = 10,
+ IMX_SC_R_DB = 11,
+ IMX_SC_R_DRC_0 = 12,
+ IMX_SC_R_DRC_1 = 13,
+ IMX_SC_R_GIC_SMMU = 14,
+ IMX_SC_R_IRQSTR_M4_0 = 15,
+ IMX_SC_R_IRQSTR_M4_1 = 16,
+ IMX_SC_R_SMMU = 17,
+ IMX_SC_R_GIC = 18,
+ IMX_SC_R_DC_0_BLIT0 = 19,
+ IMX_SC_R_DC_0_BLIT1 = 20,
+ IMX_SC_R_DC_0_BLIT2 = 21,
+ IMX_SC_R_DC_0_BLIT_OUT = 22,
+ IMX_SC_R_DC_0_CAPTURE0 = 23,
+ IMX_SC_R_DC_0_CAPTURE1 = 24,
+ IMX_SC_R_DC_0_WARP = 25,
+ IMX_SC_R_DC_0_INTEGRAL0 = 26,
+ IMX_SC_R_DC_0_INTEGRAL1 = 27,
+ IMX_SC_R_DC_0_VIDEO0 = 28,
+ IMX_SC_R_DC_0_VIDEO1 = 29,
+ IMX_SC_R_DC_0_FRAC0 = 30,
+ IMX_SC_R_DC_0_FRAC1 = 31,
+ IMX_SC_R_DC_0 = 32,
+ IMX_SC_R_GPU_2_PID0 = 33,
+ IMX_SC_R_DC_0_PLL_0 = 34,
+ IMX_SC_R_DC_0_PLL_1 = 35,
+ IMX_SC_R_DC_1_BLIT0 = 36,
+ IMX_SC_R_DC_1_BLIT1 = 37,
+ IMX_SC_R_DC_1_BLIT2 = 38,
+ IMX_SC_R_DC_1_BLIT_OUT = 39,
+ IMX_SC_R_DC_1_CAPTURE0 = 40,
+ IMX_SC_R_DC_1_CAPTURE1 = 41,
+ IMX_SC_R_DC_1_WARP = 42,
+ IMX_SC_R_DC_1_INTEGRAL0 = 43,
+ IMX_SC_R_DC_1_INTEGRAL1 = 44,
+ IMX_SC_R_DC_1_VIDEO0 = 45,
+ IMX_SC_R_DC_1_VIDEO1 = 46,
+ IMX_SC_R_DC_1_FRAC0 = 47,
+ IMX_SC_R_DC_1_FRAC1 = 48,
+ IMX_SC_R_DC_1 = 49,
+ IMX_SC_R_GPU_3_PID0 = 50,
+ IMX_SC_R_DC_1_PLL_0 = 51,
+ IMX_SC_R_DC_1_PLL_1 = 52,
+ IMX_SC_R_SPI_0 = 53,
+ IMX_SC_R_SPI_1 = 54,
+ IMX_SC_R_SPI_2 = 55,
+ IMX_SC_R_SPI_3 = 56,
+ IMX_SC_R_UART_0 = 57,
+ IMX_SC_R_UART_1 = 58,
+ IMX_SC_R_UART_2 = 59,
+ IMX_SC_R_UART_3 = 60,
+ IMX_SC_R_UART_4 = 61,
+ IMX_SC_R_EMVSIM_0 = 62,
+ IMX_SC_R_EMVSIM_1 = 63,
+ IMX_SC_R_DMA_0_CH0 = 64,
+ IMX_SC_R_DMA_0_CH1 = 65,
+ IMX_SC_R_DMA_0_CH2 = 66,
+ IMX_SC_R_DMA_0_CH3 = 67,
+ IMX_SC_R_DMA_0_CH4 = 68,
+ IMX_SC_R_DMA_0_CH5 = 69,
+ IMX_SC_R_DMA_0_CH6 = 70,
+ IMX_SC_R_DMA_0_CH7 = 71,
+ IMX_SC_R_DMA_0_CH8 = 72,
+ IMX_SC_R_DMA_0_CH9 = 73,
+ IMX_SC_R_DMA_0_CH10 = 74,
+ IMX_SC_R_DMA_0_CH11 = 75,
+ IMX_SC_R_DMA_0_CH12 = 76,
+ IMX_SC_R_DMA_0_CH13 = 77,
+ IMX_SC_R_DMA_0_CH14 = 78,
+ IMX_SC_R_DMA_0_CH15 = 79,
+ IMX_SC_R_DMA_0_CH16 = 80,
+ IMX_SC_R_DMA_0_CH17 = 81,
+ IMX_SC_R_DMA_0_CH18 = 82,
+ IMX_SC_R_DMA_0_CH19 = 83,
+ IMX_SC_R_DMA_0_CH20 = 84,
+ IMX_SC_R_DMA_0_CH21 = 85,
+ IMX_SC_R_DMA_0_CH22 = 86,
+ IMX_SC_R_DMA_0_CH23 = 87,
+ IMX_SC_R_DMA_0_CH24 = 88,
+ IMX_SC_R_DMA_0_CH25 = 89,
+ IMX_SC_R_DMA_0_CH26 = 90,
+ IMX_SC_R_DMA_0_CH27 = 91,
+ IMX_SC_R_DMA_0_CH28 = 92,
+ IMX_SC_R_DMA_0_CH29 = 93,
+ IMX_SC_R_DMA_0_CH30 = 94,
+ IMX_SC_R_DMA_0_CH31 = 95,
+ IMX_SC_R_I2C_0 = 96,
+ IMX_SC_R_I2C_1 = 97,
+ IMX_SC_R_I2C_2 = 98,
+ IMX_SC_R_I2C_3 = 99,
+ IMX_SC_R_I2C_4 = 100,
+ IMX_SC_R_ADC_0 = 101,
+ IMX_SC_R_ADC_1 = 102,
+ IMX_SC_R_FTM_0 = 103,
+ IMX_SC_R_FTM_1 = 104,
+ IMX_SC_R_CAN_0 = 105,
+ IMX_SC_R_CAN_1 = 106,
+ IMX_SC_R_CAN_2 = 107,
+ IMX_SC_R_DMA_1_CH0 = 108,
+ IMX_SC_R_DMA_1_CH1 = 109,
+ IMX_SC_R_DMA_1_CH2 = 110,
+ IMX_SC_R_DMA_1_CH3 = 111,
+ IMX_SC_R_DMA_1_CH4 = 112,
+ IMX_SC_R_DMA_1_CH5 = 113,
+ IMX_SC_R_DMA_1_CH6 = 114,
+ IMX_SC_R_DMA_1_CH7 = 115,
+ IMX_SC_R_DMA_1_CH8 = 116,
+ IMX_SC_R_DMA_1_CH9 = 117,
+ IMX_SC_R_DMA_1_CH10 = 118,
+ IMX_SC_R_DMA_1_CH11 = 119,
+ IMX_SC_R_DMA_1_CH12 = 120,
+ IMX_SC_R_DMA_1_CH13 = 121,
+ IMX_SC_R_DMA_1_CH14 = 122,
+ IMX_SC_R_DMA_1_CH15 = 123,
+ IMX_SC_R_DMA_1_CH16 = 124,
+ IMX_SC_R_DMA_1_CH17 = 125,
+ IMX_SC_R_DMA_1_CH18 = 126,
+ IMX_SC_R_DMA_1_CH19 = 127,
+ IMX_SC_R_DMA_1_CH20 = 128,
+ IMX_SC_R_DMA_1_CH21 = 129,
+ IMX_SC_R_DMA_1_CH22 = 130,
+ IMX_SC_R_DMA_1_CH23 = 131,
+ IMX_SC_R_DMA_1_CH24 = 132,
+ IMX_SC_R_DMA_1_CH25 = 133,
+ IMX_SC_R_DMA_1_CH26 = 134,
+ IMX_SC_R_DMA_1_CH27 = 135,
+ IMX_SC_R_DMA_1_CH28 = 136,
+ IMX_SC_R_DMA_1_CH29 = 137,
+ IMX_SC_R_DMA_1_CH30 = 138,
+ IMX_SC_R_DMA_1_CH31 = 139,
+ IMX_SC_R_UNUSED1 = 140,
+ IMX_SC_R_UNUSED2 = 141,
+ IMX_SC_R_UNUSED3 = 142,
+ IMX_SC_R_UNUSED4 = 143,
+ IMX_SC_R_GPU_0_PID0 = 144,
+ IMX_SC_R_GPU_0_PID1 = 145,
+ IMX_SC_R_GPU_0_PID2 = 146,
+ IMX_SC_R_GPU_0_PID3 = 147,
+ IMX_SC_R_GPU_1_PID0 = 148,
+ IMX_SC_R_GPU_1_PID1 = 149,
+ IMX_SC_R_GPU_1_PID2 = 150,
+ IMX_SC_R_GPU_1_PID3 = 151,
+ IMX_SC_R_PCIE_A = 152,
+ IMX_SC_R_SERDES_0 = 153,
+ IMX_SC_R_MATCH_0 = 154,
+ IMX_SC_R_MATCH_1 = 155,
+ IMX_SC_R_MATCH_2 = 156,
+ IMX_SC_R_MATCH_3 = 157,
+ IMX_SC_R_MATCH_4 = 158,
+ IMX_SC_R_MATCH_5 = 159,
+ IMX_SC_R_MATCH_6 = 160,
+ IMX_SC_R_MATCH_7 = 161,
+ IMX_SC_R_MATCH_8 = 162,
+ IMX_SC_R_MATCH_9 = 163,
+ IMX_SC_R_MATCH_10 = 164,
+ IMX_SC_R_MATCH_11 = 165,
+ IMX_SC_R_MATCH_12 = 166,
+ IMX_SC_R_MATCH_13 = 167,
+ IMX_SC_R_MATCH_14 = 168,
+ IMX_SC_R_PCIE_B = 169,
+ IMX_SC_R_SATA_0 = 170,
+ IMX_SC_R_SERDES_1 = 171,
+ IMX_SC_R_HSIO_GPIO = 172,
+ IMX_SC_R_MATCH_15 = 173,
+ IMX_SC_R_MATCH_16 = 174,
+ IMX_SC_R_MATCH_17 = 175,
+ IMX_SC_R_MATCH_18 = 176,
+ IMX_SC_R_MATCH_19 = 177,
+ IMX_SC_R_MATCH_20 = 178,
+ IMX_SC_R_MATCH_21 = 179,
+ IMX_SC_R_MATCH_22 = 180,
+ IMX_SC_R_MATCH_23 = 181,
+ IMX_SC_R_MATCH_24 = 182,
+ IMX_SC_R_MATCH_25 = 183,
+ IMX_SC_R_MATCH_26 = 184,
+ IMX_SC_R_MATCH_27 = 185,
+ IMX_SC_R_MATCH_28 = 186,
+ IMX_SC_R_LCD_0 = 187,
+ IMX_SC_R_LCD_0_PWM_0 = 188,
+ IMX_SC_R_LCD_0_I2C_0 = 189,
+ IMX_SC_R_LCD_0_I2C_1 = 190,
+ IMX_SC_R_PWM_0 = 191,
+ IMX_SC_R_PWM_1 = 192,
+ IMX_SC_R_PWM_2 = 193,
+ IMX_SC_R_PWM_3 = 194,
+ IMX_SC_R_PWM_4 = 195,
+ IMX_SC_R_PWM_5 = 196,
+ IMX_SC_R_PWM_6 = 197,
+ IMX_SC_R_PWM_7 = 198,
+ IMX_SC_R_GPIO_0 = 199,
+ IMX_SC_R_GPIO_1 = 200,
+ IMX_SC_R_GPIO_2 = 201,
+ IMX_SC_R_GPIO_3 = 202,
+ IMX_SC_R_GPIO_4 = 203,
+ IMX_SC_R_GPIO_5 = 204,
+ IMX_SC_R_GPIO_6 = 205,
+ IMX_SC_R_GPIO_7 = 206,
+ IMX_SC_R_GPT_0 = 207,
+ IMX_SC_R_GPT_1 = 208,
+ IMX_SC_R_GPT_2 = 209,
+ IMX_SC_R_GPT_3 = 210,
+ IMX_SC_R_GPT_4 = 211,
+ IMX_SC_R_KPP = 212,
+ IMX_SC_R_MU_0A = 213,
+ IMX_SC_R_MU_1A = 214,
+ IMX_SC_R_MU_2A = 215,
+ IMX_SC_R_MU_3A = 216,
+ IMX_SC_R_MU_4A = 217,
+ IMX_SC_R_MU_5A = 218,
+ IMX_SC_R_MU_6A = 219,
+ IMX_SC_R_MU_7A = 220,
+ IMX_SC_R_MU_8A = 221,
+ IMX_SC_R_MU_9A = 222,
+ IMX_SC_R_MU_10A = 223,
+ IMX_SC_R_MU_11A = 224,
+ IMX_SC_R_MU_12A = 225,
+ IMX_SC_R_MU_13A = 226,
+ IMX_SC_R_MU_5B = 227,
+ IMX_SC_R_MU_6B = 228,
+ IMX_SC_R_MU_7B = 229,
+ IMX_SC_R_MU_8B = 230,
+ IMX_SC_R_MU_9B = 231,
+ IMX_SC_R_MU_10B = 232,
+ IMX_SC_R_MU_11B = 233,
+ IMX_SC_R_MU_12B = 234,
+ IMX_SC_R_MU_13B = 235,
+ IMX_SC_R_ROM_0 = 236,
+ IMX_SC_R_FSPI_0 = 237,
+ IMX_SC_R_FSPI_1 = 238,
+ IMX_SC_R_IEE = 239,
+ IMX_SC_R_IEE_R0 = 240,
+ IMX_SC_R_IEE_R1 = 241,
+ IMX_SC_R_IEE_R2 = 242,
+ IMX_SC_R_IEE_R3 = 243,
+ IMX_SC_R_IEE_R4 = 244,
+ IMX_SC_R_IEE_R5 = 245,
+ IMX_SC_R_IEE_R6 = 246,
+ IMX_SC_R_IEE_R7 = 247,
+ IMX_SC_R_SDHC_0 = 248,
+ IMX_SC_R_SDHC_1 = 249,
+ IMX_SC_R_SDHC_2 = 250,
+ IMX_SC_R_ENET_0 = 251,
+ IMX_SC_R_ENET_1 = 252,
+ IMX_SC_R_MLB_0 = 253,
+ IMX_SC_R_DMA_2_CH0 = 254,
+ IMX_SC_R_DMA_2_CH1 = 255,
+ IMX_SC_R_DMA_2_CH2 = 256,
+ IMX_SC_R_DMA_2_CH3 = 257,
+ IMX_SC_R_DMA_2_CH4 = 258,
+ IMX_SC_R_USB_0 = 259,
+ IMX_SC_R_USB_1 = 260,
+ IMX_SC_R_USB_0_PHY = 261,
+ IMX_SC_R_USB_2 = 262,
+ IMX_SC_R_USB_2_PHY = 263,
+ IMX_SC_R_DTCP = 264,
+ IMX_SC_R_NAND = 265,
+ IMX_SC_R_LVDS_0 = 266,
+ IMX_SC_R_LVDS_0_PWM_0 = 267,
+ IMX_SC_R_LVDS_0_I2C_0 = 268,
+ IMX_SC_R_LVDS_0_I2C_1 = 269,
+ IMX_SC_R_LVDS_1 = 270,
+ IMX_SC_R_LVDS_1_PWM_0 = 271,
+ IMX_SC_R_LVDS_1_I2C_0 = 272,
+ IMX_SC_R_LVDS_1_I2C_1 = 273,
+ IMX_SC_R_LVDS_2 = 274,
+ IMX_SC_R_LVDS_2_PWM_0 = 275,
+ IMX_SC_R_LVDS_2_I2C_0 = 276,
+ IMX_SC_R_LVDS_2_I2C_1 = 277,
+ IMX_SC_R_M4_0_PID0 = 278,
+ IMX_SC_R_M4_0_PID1 = 279,
+ IMX_SC_R_M4_0_PID2 = 280,
+ IMX_SC_R_M4_0_PID3 = 281,
+ IMX_SC_R_M4_0_PID4 = 282,
+ IMX_SC_R_M4_0_RGPIO = 283,
+ IMX_SC_R_M4_0_SEMA42 = 284,
+ IMX_SC_R_M4_0_TPM = 285,
+ IMX_SC_R_M4_0_PIT = 286,
+ IMX_SC_R_M4_0_UART = 287,
+ IMX_SC_R_M4_0_I2C = 288,
+ IMX_SC_R_M4_0_INTMUX = 289,
+ IMX_SC_R_M4_0_SIM = 290,
+ IMX_SC_R_M4_0_WDOG = 291,
+ IMX_SC_R_M4_0_MU_0B = 292,
+ IMX_SC_R_M4_0_MU_0A0 = 293,
+ IMX_SC_R_M4_0_MU_0A1 = 294,
+ IMX_SC_R_M4_0_MU_0A2 = 295,
+ IMX_SC_R_M4_0_MU_0A3 = 296,
+ IMX_SC_R_M4_0_MU_1A = 297,
+ IMX_SC_R_M4_1_PID0 = 298,
+ IMX_SC_R_M4_1_PID1 = 299,
+ IMX_SC_R_M4_1_PID2 = 300,
+ IMX_SC_R_M4_1_PID3 = 301,
+ IMX_SC_R_M4_1_PID4 = 302,
+ IMX_SC_R_M4_1_RGPIO = 303,
+ IMX_SC_R_M4_1_SEMA42 = 304,
+ IMX_SC_R_M4_1_TPM = 305,
+ IMX_SC_R_M4_1_PIT = 306,
+ IMX_SC_R_M4_1_UART = 307,
+ IMX_SC_R_M4_1_I2C = 308,
+ IMX_SC_R_M4_1_INTMUX = 309,
+ IMX_SC_R_M4_1_SIM = 310,
+ IMX_SC_R_M4_1_WDOG = 311,
+ IMX_SC_R_M4_1_MU_0B = 312,
+ IMX_SC_R_M4_1_MU_0A0 = 313,
+ IMX_SC_R_M4_1_MU_0A1 = 314,
+ IMX_SC_R_M4_1_MU_0A2 = 315,
+ IMX_SC_R_M4_1_MU_0A3 = 316,
+ IMX_SC_R_M4_1_MU_1A = 317,
+ IMX_SC_R_SAI_0 = 318,
+ IMX_SC_R_SAI_1 = 319,
+ IMX_SC_R_SAI_2 = 320,
+ IMX_SC_R_IRQSTR_SCU2 = 321,
+ IMX_SC_R_IRQSTR_DSP = 322,
+ IMX_SC_R_UNUSED5 = 323,
+ IMX_SC_R_UNUSED6 = 324,
+ IMX_SC_R_AUDIO_PLL_0 = 325,
+ IMX_SC_R_PI_0 = 326,
+ IMX_SC_R_PI_0_PWM_0 = 327,
+ IMX_SC_R_PI_0_PWM_1 = 328,
+ IMX_SC_R_PI_0_I2C_0 = 329,
+ IMX_SC_R_PI_0_PLL = 330,
+ IMX_SC_R_PI_1 = 331,
+ IMX_SC_R_PI_1_PWM_0 = 332,
+ IMX_SC_R_PI_1_PWM_1 = 333,
+ IMX_SC_R_PI_1_I2C_0 = 334,
+ IMX_SC_R_PI_1_PLL = 335,
+ IMX_SC_R_SC_PID0 = 336,
+ IMX_SC_R_SC_PID1 = 337,
+ IMX_SC_R_SC_PID2 = 338,
+ IMX_SC_R_SC_PID3 = 339,
+ IMX_SC_R_SC_PID4 = 340,
+ IMX_SC_R_SC_SEMA42 = 341,
+ IMX_SC_R_SC_TPM = 342,
+ IMX_SC_R_SC_PIT = 343,
+ IMX_SC_R_SC_UART = 344,
+ IMX_SC_R_SC_I2C = 345,
+ IMX_SC_R_SC_MU_0B = 346,
+ IMX_SC_R_SC_MU_0A0 = 347,
+ IMX_SC_R_SC_MU_0A1 = 348,
+ IMX_SC_R_SC_MU_0A2 = 349,
+ IMX_SC_R_SC_MU_0A3 = 350,
+ IMX_SC_R_SC_MU_1A = 351,
+ IMX_SC_R_SYSCNT_RD = 352,
+ IMX_SC_R_SYSCNT_CMP = 353,
+ IMX_SC_R_DEBUG = 354,
+ IMX_SC_R_SYSTEM = 355,
+ IMX_SC_R_SNVS = 356,
+ IMX_SC_R_OTP = 357,
+ IMX_SC_R_VPU_PID0 = 358,
+ IMX_SC_R_VPU_PID1 = 359,
+ IMX_SC_R_VPU_PID2 = 360,
+ IMX_SC_R_VPU_PID3 = 361,
+ IMX_SC_R_VPU_PID4 = 362,
+ IMX_SC_R_VPU_PID5 = 363,
+ IMX_SC_R_VPU_PID6 = 364,
+ IMX_SC_R_VPU_PID7 = 365,
+ IMX_SC_R_VPU_UART = 366,
+ IMX_SC_R_VPUCORE = 367,
+ IMX_SC_R_VPUCORE_0 = 368,
+ IMX_SC_R_VPUCORE_1 = 369,
+ IMX_SC_R_VPUCORE_2 = 370,
+ IMX_SC_R_VPUCORE_3 = 371,
+ IMX_SC_R_DMA_4_CH0 = 372,
+ IMX_SC_R_DMA_4_CH1 = 373,
+ IMX_SC_R_DMA_4_CH2 = 374,
+ IMX_SC_R_DMA_4_CH3 = 375,
+ IMX_SC_R_DMA_4_CH4 = 376,
+ IMX_SC_R_ISI_CH0 = 377,
+ IMX_SC_R_ISI_CH1 = 378,
+ IMX_SC_R_ISI_CH2 = 379,
+ IMX_SC_R_ISI_CH3 = 380,
+ IMX_SC_R_ISI_CH4 = 381,
+ IMX_SC_R_ISI_CH5 = 382,
+ IMX_SC_R_ISI_CH6 = 383,
+ IMX_SC_R_ISI_CH7 = 384,
+ IMX_SC_R_MJPEG_DEC_S0 = 385,
+ IMX_SC_R_MJPEG_DEC_S1 = 386,
+ IMX_SC_R_MJPEG_DEC_S2 = 387,
+ IMX_SC_R_MJPEG_DEC_S3 = 388,
+ IMX_SC_R_MJPEG_ENC_S0 = 389,
+ IMX_SC_R_MJPEG_ENC_S1 = 390,
+ IMX_SC_R_MJPEG_ENC_S2 = 391,
+ IMX_SC_R_MJPEG_ENC_S3 = 392,
+ IMX_SC_R_MIPI_0 = 393,
+ IMX_SC_R_MIPI_0_PWM_0 = 394,
+ IMX_SC_R_MIPI_0_I2C_0 = 395,
+ IMX_SC_R_MIPI_0_I2C_1 = 396,
+ IMX_SC_R_MIPI_1 = 397,
+ IMX_SC_R_MIPI_1_PWM_0 = 398,
+ IMX_SC_R_MIPI_1_I2C_0 = 399,
+ IMX_SC_R_MIPI_1_I2C_1 = 400,
+ IMX_SC_R_CSI_0 = 401,
+ IMX_SC_R_CSI_0_PWM_0 = 402,
+ IMX_SC_R_CSI_0_I2C_0 = 403,
+ IMX_SC_R_CSI_1 = 404,
+ IMX_SC_R_CSI_1_PWM_0 = 405,
+ IMX_SC_R_CSI_1_I2C_0 = 406,
+ IMX_SC_R_HDMI = 407,
+ IMX_SC_R_HDMI_I2S = 408,
+ IMX_SC_R_HDMI_I2C_0 = 409,
+ IMX_SC_R_HDMI_PLL_0 = 410,
+ IMX_SC_R_HDMI_RX = 411,
+ IMX_SC_R_HDMI_RX_BYPASS = 412,
+ IMX_SC_R_HDMI_RX_I2C_0 = 413,
+ IMX_SC_R_ASRC_0 = 414,
+ IMX_SC_R_ESAI_0 = 415,
+ IMX_SC_R_SPDIF_0 = 416,
+ IMX_SC_R_SPDIF_1 = 417,
+ IMX_SC_R_SAI_3 = 418,
+ IMX_SC_R_SAI_4 = 419,
+ IMX_SC_R_SAI_5 = 420,
+ IMX_SC_R_GPT_5 = 421,
+ IMX_SC_R_GPT_6 = 422,
+ IMX_SC_R_GPT_7 = 423,
+ IMX_SC_R_GPT_8 = 424,
+ IMX_SC_R_GPT_9 = 425,
+ IMX_SC_R_GPT_10 = 426,
+ IMX_SC_R_DMA_2_CH5 = 427,
+ IMX_SC_R_DMA_2_CH6 = 428,
+ IMX_SC_R_DMA_2_CH7 = 429,
+ IMX_SC_R_DMA_2_CH8 = 430,
+ IMX_SC_R_DMA_2_CH9 = 431,
+ IMX_SC_R_DMA_2_CH10 = 432,
+ IMX_SC_R_DMA_2_CH11 = 433,
+ IMX_SC_R_DMA_2_CH12 = 434,
+ IMX_SC_R_DMA_2_CH13 = 435,
+ IMX_SC_R_DMA_2_CH14 = 436,
+ IMX_SC_R_DMA_2_CH15 = 437,
+ IMX_SC_R_DMA_2_CH16 = 438,
+ IMX_SC_R_DMA_2_CH17 = 439,
+ IMX_SC_R_DMA_2_CH18 = 440,
+ IMX_SC_R_DMA_2_CH19 = 441,
+ IMX_SC_R_DMA_2_CH20 = 442,
+ IMX_SC_R_DMA_2_CH21 = 443,
+ IMX_SC_R_DMA_2_CH22 = 444,
+ IMX_SC_R_DMA_2_CH23 = 445,
+ IMX_SC_R_DMA_2_CH24 = 446,
+ IMX_SC_R_DMA_2_CH25 = 447,
+ IMX_SC_R_DMA_2_CH26 = 448,
+ IMX_SC_R_DMA_2_CH27 = 449,
+ IMX_SC_R_DMA_2_CH28 = 450,
+ IMX_SC_R_DMA_2_CH29 = 451,
+ IMX_SC_R_DMA_2_CH30 = 452,
+ IMX_SC_R_DMA_2_CH31 = 453,
+ IMX_SC_R_ASRC_1 = 454,
+ IMX_SC_R_ESAI_1 = 455,
+ IMX_SC_R_SAI_6 = 456,
+ IMX_SC_R_SAI_7 = 457,
+ IMX_SC_R_AMIX = 458,
+ IMX_SC_R_MQS_0 = 459,
+ IMX_SC_R_DMA_3_CH0 = 460,
+ IMX_SC_R_DMA_3_CH1 = 461,
+ IMX_SC_R_DMA_3_CH2 = 462,
+ IMX_SC_R_DMA_3_CH3 = 463,
+ IMX_SC_R_DMA_3_CH4 = 464,
+ IMX_SC_R_DMA_3_CH5 = 465,
+ IMX_SC_R_DMA_3_CH6 = 466,
+ IMX_SC_R_DMA_3_CH7 = 467,
+ IMX_SC_R_DMA_3_CH8 = 468,
+ IMX_SC_R_DMA_3_CH9 = 469,
+ IMX_SC_R_DMA_3_CH10 = 470,
+ IMX_SC_R_DMA_3_CH11 = 471,
+ IMX_SC_R_DMA_3_CH12 = 472,
+ IMX_SC_R_DMA_3_CH13 = 473,
+ IMX_SC_R_DMA_3_CH14 = 474,
+ IMX_SC_R_DMA_3_CH15 = 475,
+ IMX_SC_R_DMA_3_CH16 = 476,
+ IMX_SC_R_DMA_3_CH17 = 477,
+ IMX_SC_R_DMA_3_CH18 = 478,
+ IMX_SC_R_DMA_3_CH19 = 479,
+ IMX_SC_R_DMA_3_CH20 = 480,
+ IMX_SC_R_DMA_3_CH21 = 481,
+ IMX_SC_R_DMA_3_CH22 = 482,
+ IMX_SC_R_DMA_3_CH23 = 483,
+ IMX_SC_R_DMA_3_CH24 = 484,
+ IMX_SC_R_DMA_3_CH25 = 485,
+ IMX_SC_R_DMA_3_CH26 = 486,
+ IMX_SC_R_DMA_3_CH27 = 487,
+ IMX_SC_R_DMA_3_CH28 = 488,
+ IMX_SC_R_DMA_3_CH29 = 489,
+ IMX_SC_R_DMA_3_CH30 = 490,
+ IMX_SC_R_DMA_3_CH31 = 491,
+ IMX_SC_R_AUDIO_PLL_1 = 492,
+ IMX_SC_R_AUDIO_CLK_0 = 493,
+ IMX_SC_R_AUDIO_CLK_1 = 494,
+ IMX_SC_R_MCLK_OUT_0 = 495,
+ IMX_SC_R_MCLK_OUT_1 = 496,
+ IMX_SC_R_PMIC_0 = 497,
+ IMX_SC_R_PMIC_1 = 498,
+ IMX_SC_R_SECO = 499,
+ IMX_SC_R_CAAM_JR1 = 500,
+ IMX_SC_R_CAAM_JR2 = 501,
+ IMX_SC_R_CAAM_JR3 = 502,
+ IMX_SC_R_SECO_MU_2 = 503,
+ IMX_SC_R_SECO_MU_3 = 504,
+ IMX_SC_R_SECO_MU_4 = 505,
+ IMX_SC_R_HDMI_RX_PWM_0 = 506,
+ IMX_SC_R_A35 = 507,
+ IMX_SC_R_A35_0 = 508,
+ IMX_SC_R_A35_1 = 509,
+ IMX_SC_R_A35_2 = 510,
+ IMX_SC_R_A35_3 = 511,
+ IMX_SC_R_DSP = 512,
+ IMX_SC_R_DSP_RAM = 513,
+ IMX_SC_R_CAAM_JR1_OUT = 514,
+ IMX_SC_R_CAAM_JR2_OUT = 515,
+ IMX_SC_R_CAAM_JR3_OUT = 516,
+ IMX_SC_R_VPU_DEC_0 = 517,
+ IMX_SC_R_VPU_ENC_0 = 518,
+ IMX_SC_R_CAAM_JR0 = 519,
+ IMX_SC_R_CAAM_JR0_OUT = 520,
+ IMX_SC_R_PMIC_2 = 521,
+ IMX_SC_R_DBLOGIC = 522,
+ IMX_SC_R_HDMI_PLL_1 = 523,
+ IMX_SC_R_BOARD_R0 = 524,
+ IMX_SC_R_BOARD_R1 = 525,
+ IMX_SC_R_BOARD_R2 = 526,
+ IMX_SC_R_BOARD_R3 = 527,
+ IMX_SC_R_BOARD_R4 = 528,
+ IMX_SC_R_BOARD_R5 = 529,
+ IMX_SC_R_BOARD_R6 = 530,
+ IMX_SC_R_BOARD_R7 = 531,
+ IMX_SC_R_MJPEG_DEC_MP = 532,
+ IMX_SC_R_MJPEG_ENC_MP = 533,
+ IMX_SC_R_VPU_TS_0 = 534,
+ IMX_SC_R_VPU_MU_0 = 535,
+ IMX_SC_R_VPU_MU_1 = 536,
+ IMX_SC_R_VPU_MU_2 = 537,
+ IMX_SC_R_VPU_MU_3 = 538,
+ IMX_SC_R_VPU_ENC_1 = 539,
+ IMX_SC_R_VPU = 540,
+ IMX_SC_R_LAST
+};
+
+/* NOTE - please add by replacing some of the UNUSED from above! */
+
+/*
+ * This type is used to indicate a control.
+ */
+enum imx_sc_ctrl {
+ IMX_SC_C_TEMP = 0,
+ IMX_SC_C_TEMP_HI = 1,
+ IMX_SC_C_TEMP_LOW = 2,
+ IMX_SC_C_PXL_LINK_MST1_ADDR = 3,
+ IMX_SC_C_PXL_LINK_MST2_ADDR = 4,
+ IMX_SC_C_PXL_LINK_MST_ENB = 5,
+ IMX_SC_C_PXL_LINK_MST1_ENB = 6,
+ IMX_SC_C_PXL_LINK_MST2_ENB = 7,
+ IMX_SC_C_PXL_LINK_SLV1_ADDR = 8,
+ IMX_SC_C_PXL_LINK_SLV2_ADDR = 9,
+ IMX_SC_C_PXL_LINK_MST_VLD = 10,
+ IMX_SC_C_PXL_LINK_MST1_VLD = 11,
+ IMX_SC_C_PXL_LINK_MST2_VLD = 12,
+ IMX_SC_C_SINGLE_MODE = 13,
+ IMX_SC_C_ID = 14,
+ IMX_SC_C_PXL_CLK_POLARITY = 15,
+ IMX_SC_C_LINESTATE = 16,
+ IMX_SC_C_PCIE_G_RST = 17,
+ IMX_SC_C_PCIE_BUTTON_RST = 18,
+ IMX_SC_C_PCIE_PERST = 19,
+ IMX_SC_C_PHY_RESET = 20,
+ IMX_SC_C_PXL_LINK_RATE_CORRECTION = 21,
+ IMX_SC_C_PANIC = 22,
+ IMX_SC_C_PRIORITY_GROUP = 23,
+ IMX_SC_C_TXCLK = 24,
+ IMX_SC_C_CLKDIV = 25,
+ IMX_SC_C_DISABLE_50 = 26,
+ IMX_SC_C_DISABLE_125 = 27,
+ IMX_SC_C_SEL_125 = 28,
+ IMX_SC_C_MODE = 29,
+ IMX_SC_C_SYNC_CTRL0 = 30,
+ IMX_SC_C_KACHUNK_CNT = 31,
+ IMX_SC_C_KACHUNK_SEL = 32,
+ IMX_SC_C_SYNC_CTRL1 = 33,
+ IMX_SC_C_DPI_RESET = 34,
+ IMX_SC_C_MIPI_RESET = 35,
+ IMX_SC_C_DUAL_MODE = 36,
+ IMX_SC_C_VOLTAGE = 37,
+ IMX_SC_C_PXL_LINK_SEL = 38,
+ IMX_SC_C_OFS_SEL = 39,
+ IMX_SC_C_OFS_AUDIO = 40,
+ IMX_SC_C_OFS_PERIPH = 41,
+ IMX_SC_C_OFS_IRQ = 42,
+ IMX_SC_C_RST0 = 43,
+ IMX_SC_C_RST1 = 44,
+ IMX_SC_C_SEL0 = 45,
+ IMX_SC_C_LAST
+};
+
+#endif /* _SC_TYPES_H */
diff --git a/include/linux/firmware/meson/meson_sm.h b/include/linux/firmware/meson/meson_sm.h
index 37a5eaea69dde299a18855ffc99b1227513b25da..f98c20dd266ed4da026b598257728da3d067a2f0 100644
--- a/include/linux/firmware/meson/meson_sm.h
+++ b/include/linux/firmware/meson/meson_sm.h
@@ -17,6 +17,7 @@ enum {
SM_EFUSE_READ,
SM_EFUSE_WRITE,
SM_EFUSE_USER_MAX,
+ SM_GET_CHIP_ID,
};
struct meson_sm_firmware;
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
new file mode 100644
index 0000000000000000000000000000000000000000..3c3c28eff56a386201fee57477d92df99a21609b
--- /dev/null
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ * Copyright (C) 2014-2018 Xilinx
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Davorin Mista <davorin.mista@aggios.com>
+ * Jolly Shah <jollys@xilinx.com>
+ * Rajan Vaja <rajanv@xilinx.com>
+ */
+
+#ifndef __FIRMWARE_ZYNQMP_H__
+#define __FIRMWARE_ZYNQMP_H__
+
+#define ZYNQMP_PM_VERSION_MAJOR 1
+#define ZYNQMP_PM_VERSION_MINOR 0
+
+#define ZYNQMP_PM_VERSION ((ZYNQMP_PM_VERSION_MAJOR << 16) | \
+ ZYNQMP_PM_VERSION_MINOR)
+
+#define ZYNQMP_TZ_VERSION_MAJOR 1
+#define ZYNQMP_TZ_VERSION_MINOR 0
+
+#define ZYNQMP_TZ_VERSION ((ZYNQMP_TZ_VERSION_MAJOR << 16) | \
+ ZYNQMP_TZ_VERSION_MINOR)
+
+/* SMC SIP service Call Function Identifier Prefix */
+#define PM_SIP_SVC 0xC2000000
+#define PM_GET_TRUSTZONE_VERSION 0xa03
+
+/* Number of 32bits values in payload */
+#define PAYLOAD_ARG_CNT 4U
+
+enum pm_api_id {
+ PM_GET_API_VERSION = 1,
+ PM_IOCTL = 34,
+ PM_QUERY_DATA,
+ PM_CLOCK_ENABLE,
+ PM_CLOCK_DISABLE,
+ PM_CLOCK_GETSTATE,
+ PM_CLOCK_SETDIVIDER,
+ PM_CLOCK_GETDIVIDER,
+ PM_CLOCK_SETRATE,
+ PM_CLOCK_GETRATE,
+ PM_CLOCK_SETPARENT,
+ PM_CLOCK_GETPARENT,
+};
+
+/* PMU-FW return status codes */
+enum pm_ret_status {
+ XST_PM_SUCCESS = 0,
+ XST_PM_INTERNAL = 2000,
+ XST_PM_CONFLICT,
+ XST_PM_NO_ACCESS,
+ XST_PM_INVALID_NODE,
+ XST_PM_DOUBLE_REQ,
+ XST_PM_ABORT_SUSPEND,
+};
+
+enum pm_ioctl_id {
+ IOCTL_SET_PLL_FRAC_MODE = 8,
+ IOCTL_GET_PLL_FRAC_MODE,
+ IOCTL_SET_PLL_FRAC_DATA,
+ IOCTL_GET_PLL_FRAC_DATA,
+};
+
+enum pm_query_id {
+ PM_QID_INVALID,
+ PM_QID_CLOCK_GET_NAME,
+ PM_QID_CLOCK_GET_TOPOLOGY,
+ PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS,
+ PM_QID_CLOCK_GET_PARENTS,
+ PM_QID_CLOCK_GET_ATTRIBUTES,
+ PM_QID_CLOCK_GET_NUM_CLOCKS = 12,
+};
+
+/**
+ * struct zynqmp_pm_query_data - PM query data
+ * @qid: query ID
+ * @arg1: Argument 1 of query data
+ * @arg2: Argument 2 of query data
+ * @arg3: Argument 3 of query data
+ */
+struct zynqmp_pm_query_data {
+ u32 qid;
+ u32 arg1;
+ u32 arg2;
+ u32 arg3;
+};
+
+struct zynqmp_eemi_ops {
+ int (*get_api_version)(u32 *version);
+ int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
+ int (*clock_enable)(u32 clock_id);
+ int (*clock_disable)(u32 clock_id);
+ int (*clock_getstate)(u32 clock_id, u32 *state);
+ int (*clock_setdivider)(u32 clock_id, u32 divider);
+ int (*clock_getdivider)(u32 clock_id, u32 *divider);
+ int (*clock_setrate)(u32 clock_id, u64 rate);
+ int (*clock_getrate)(u32 clock_id, u64 *rate);
+ int (*clock_setparent)(u32 clock_id, u32 parent_id);
+ int (*clock_getparent)(u32 clock_id, u32 *parent_id);
+ int (*ioctl)(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2, u32 *out);
+};
+
+#if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
+const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
+#else
+static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
+{
+ return NULL;
+}
+#endif
+
+#endif /* __FIRMWARE_ZYNQMP_H__ */
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index 2efa3470a451b9d1d3fc3f082d0c59bcfd247c17..1ea3aab972b42c315bf41a6775739c393a441d94 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -46,7 +46,6 @@ struct sysc_regbits {
s8 emufree_shift;
};
-#define SYSC_QUIRK_RESOURCE_PROVIDER BIT(9)
#define SYSC_QUIRK_LEGACY_IDLE BIT(8)
#define SYSC_QUIRK_RESET_STATUS BIT(7)
#define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6)
diff --git a/include/linux/reset.h b/include/linux/reset.h
index 09732c36f3515a1e497dead9efe1df8297826486..29af6d6b2f4b8103b1afe509612b825d7a7994d9 100644
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -116,7 +116,7 @@ static inline int device_reset_optional(struct device *dev)
* @id: reset line name
*
* Returns a struct reset_control or IS_ERR() condition containing errno.
- * If this function is called more then once for the same reset_control it will
+ * If this function is called more than once for the same reset_control it will
* return -EBUSY.
*
* See reset_control_get_shared for details on shared references to
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index f4c9fc0fc7555a226a7607758b816b1c9486d5f6..3105055c00a7ee204adfe750432e5e474897812f 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -91,6 +91,8 @@ struct scmi_clk_ops {
* to sustained performance level mapping
* @freq_get: gets the frequency for a given device using sustained frequency
* to sustained performance level mapping
+ * @est_power_get: gets the estimated power cost for a given performance domain
+ * at a given frequency
*/
struct scmi_perf_ops {
int (*limits_set)(const struct scmi_handle *handle, u32 domain,
@@ -110,6 +112,8 @@ struct scmi_perf_ops {
unsigned long rate, bool poll);
int (*freq_get)(const struct scmi_handle *handle, u32 domain,
unsigned long *rate, bool poll);
+ int (*est_power_get)(const struct scmi_handle *handle, u32 domain,
+ unsigned long *rate, unsigned long *power);
};
/**
diff --git a/include/linux/soc/amlogic/meson-canvas.h b/include/linux/soc/amlogic/meson-canvas.h
new file mode 100644
index 0000000000000000000000000000000000000000..b4dde2fbeb3fb665ec29b71dea32f621e4fea458
--- /dev/null
+++ b/include/linux/soc/amlogic/meson-canvas.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 BayLibre, SAS
+ */
+#ifndef __SOC_MESON_CANVAS_H
+#define __SOC_MESON_CANVAS_H
+
+#include <linux/kernel.h>
+
+#define MESON_CANVAS_WRAP_NONE 0x00
+#define MESON_CANVAS_WRAP_X 0x01
+#define MESON_CANVAS_WRAP_Y 0x02
+
+#define MESON_CANVAS_BLKMODE_LINEAR 0x00
+#define MESON_CANVAS_BLKMODE_32x32 0x01
+#define MESON_CANVAS_BLKMODE_64x64 0x02
+
+#define MESON_CANVAS_ENDIAN_SWAP16 0x1
+#define MESON_CANVAS_ENDIAN_SWAP32 0x3
+#define MESON_CANVAS_ENDIAN_SWAP64 0x7
+#define MESON_CANVAS_ENDIAN_SWAP128 0xf
+
+struct meson_canvas;
+
+/**
+ * meson_canvas_get() - get a canvas provider instance
+ *
+ * @dev: consumer device pointer
+ */
+struct meson_canvas *meson_canvas_get(struct device *dev);
+
+/**
+ * meson_canvas_alloc() - take ownership of a canvas
+ *
+ * @canvas: canvas provider instance retrieved from meson_canvas_get()
+ * @canvas_index: will be filled with the canvas ID
+ */
+int meson_canvas_alloc(struct meson_canvas *canvas, u8 *canvas_index);
+
+/**
+ * meson_canvas_free() - remove ownership from a canvas
+ *
+ * @canvas: canvas provider instance retrieved from meson_canvas_get()
+ * @canvas_index: canvas ID that was obtained via meson_canvas_alloc()
+ */
+int meson_canvas_free(struct meson_canvas *canvas, u8 canvas_index);
+
+/**
+ * meson_canvas_config() - configure a canvas
+ *
+ * @canvas: canvas provider instance retrieved from meson_canvas_get()
+ * @canvas_index: canvas ID that was obtained via meson_canvas_alloc()
+ * @addr: physical address to the pixel buffer
+ * @stride: width of the buffer
+ * @height: height of the buffer
+ * @wrap: undocumented
+ * @blkmode: block mode (linear, 32x32, 64x64)
+ * @endian: byte swapping (swap16, swap32, swap64, swap128)
+ */
+int meson_canvas_config(struct meson_canvas *canvas, u8 canvas_index,
+ u32 addr, u32 stride, u32 height,
+ unsigned int wrap, unsigned int blkmode,
+ unsigned int endian);
+
+#endif
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
index 7e3b9c605ab2cd5b8c9a2a40d686826de96a3c56..69c285b1c9905496ff8b4f1d05c6b5221278075e 100644
--- a/include/linux/soc/qcom/llcc-qcom.h
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -70,25 +70,51 @@ struct llcc_slice_config {
/**
* llcc_drv_data - Data associated with the llcc driver
* @regmap: regmap associated with the llcc device
+ * @bcast_regmap: regmap associated with llcc broadcast offset
* @cfg: pointer to the data structure for slice configuration
* @lock: mutex associated with each slice
* @cfg_size: size of the config data table
* @max_slices: max slices as read from device tree
- * @bcast_off: Offset of the broadcast bank
* @num_banks: Number of llcc banks
* @bitmap: Bit map to track the active slice ids
* @offsets: Pointer to the bank offsets array
+ * @ecc_irq: interrupt for llcc cache error detection and reporting
*/
struct llcc_drv_data {
struct regmap *regmap;
+ struct regmap *bcast_regmap;
const struct llcc_slice_config *cfg;
struct mutex lock;
u32 cfg_size;
u32 max_slices;
- u32 bcast_off;
u32 num_banks;
unsigned long *bitmap;
u32 *offsets;
+ int ecc_irq;
+};
+
+/**
+ * llcc_edac_reg_data - llcc edac registers data for each error type
+ * @name: Name of the error
+ * @synd_reg: Syndrome register address
+ * @count_status_reg: Status register address to read the error count
+ * @ways_status_reg: Status register address to read the error ways
+ * @reg_cnt: Number of registers
+ * @count_mask: Mask value to get the error count
+ * @ways_mask: Mask value to get the error ways
+ * @count_shift: Shift value to get the error count
+ * @ways_shift: Shift value to get the error ways
+ */
+struct llcc_edac_reg_data {
+ char *name;
+ u64 synd_reg;
+ u64 count_status_reg;
+ u64 ways_status_reg;
+ u32 reg_cnt;
+ u32 count_mask;
+ u32 ways_mask;
+ u8 count_shift;
+ u8 ways_shift;
};
#if IS_ENABLED(CONFIG_QCOM_LLCC)
diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h
index a2b3dfcee0b55d231d457ea24baa5e2080585569..6cfe05893a76b31280face250abc23e7ec9caaa6 100644
--- a/include/linux/tee_drv.h
+++ b/include/linux/tee_drv.h
@@ -453,6 +453,79 @@ static inline int tee_shm_get_id(struct tee_shm *shm)
*/
struct tee_shm *tee_shm_get_from_id(struct tee_context *ctx, int id);
+/**
+ * tee_client_open_context() - Open a TEE context
+ * @start: if not NULL, continue search after this context
+ * @match: function to check TEE device
+ * @data: data for match function
+ * @vers: if not NULL, version data of TEE device of the context returned
+ *
+ * This function does an operation similar to open("/dev/teeX") in user space.
+ * A returned context must be released with tee_client_close_context().
+ *
+ * Returns a TEE context of the first TEE device matched by the match()
+ * callback or an ERR_PTR.
+ */
+struct tee_context *
+tee_client_open_context(struct tee_context *start,
+ int (*match)(struct tee_ioctl_version_data *,
+ const void *),
+ const void *data, struct tee_ioctl_version_data *vers);
+
+/**
+ * tee_client_close_context() - Close a TEE context
+ * @ctx: TEE context to close
+ *
+ * Note that all sessions previously opened with this context will be
+ * closed when this function is called.
+ */
+void tee_client_close_context(struct tee_context *ctx);
+
+/**
+ * tee_client_get_version() - Query version of TEE
+ * @ctx: TEE context to TEE to query
+ * @vers: Pointer to version data
+ */
+void tee_client_get_version(struct tee_context *ctx,
+ struct tee_ioctl_version_data *vers);
+
+/**
+ * tee_client_open_session() - Open a session to a Trusted Application
+ * @ctx: TEE context
+ * @arg: Open session arguments, see description of
+ * struct tee_ioctl_open_session_arg
+ * @param: Parameters passed to the Trusted Application
+ *
+ * Returns < 0 on error else see @arg->ret for result. If @arg->ret
+ * is TEEC_SUCCESS the session identifier is available in @arg->session.
+ */
+int tee_client_open_session(struct tee_context *ctx,
+ struct tee_ioctl_open_session_arg *arg,
+ struct tee_param *param);
+
+/**
+ * tee_client_close_session() - Close a session to a Trusted Application
+ * @ctx: TEE Context
+ * @session: Session id
+ *
+ * Return < 0 on error else 0, regardless the session will not be
+ * valid after this function has returned.
+ */
+int tee_client_close_session(struct tee_context *ctx, u32 session);
+
+/**
+ * tee_client_invoke_func() - Invoke a function in a Trusted Application
+ * @ctx: TEE Context
+ * @arg: Invoke arguments, see description of
+ * struct tee_ioctl_invoke_arg
+ * @param: Parameters passed to the Trusted Application
+ *
+ * Returns < 0 on error else see @arg->ret for result.
+ */
+int tee_client_invoke_func(struct tee_context *ctx,
+ struct tee_ioctl_invoke_arg *arg,
+ struct tee_param *param);
+
static inline bool tee_param_is_memref(struct tee_param *param)
{
switch (param->attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK) {
diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h
index 597783b8a3a074e758ddff99adaabe42cbe85b2b..56877660d5ba34df26dd9cd177fb729868a718b8 100644
--- a/include/soc/fsl/qman.h
+++ b/include/soc/fsl/qman.h
@@ -1194,4 +1194,32 @@ int qman_release_cgrid(u32 id);
*/
int qman_is_probed(void);
+/**
+ * qman_dqrr_get_ithresh - Get coalesce interrupt threshold
+ * @portal: portal to get the value for
+ * @ithresh: threshold pointer
+ */
+void qman_dqrr_get_ithresh(struct qman_portal *portal, u8 *ithresh);
+
+/**
+ * qman_dqrr_set_ithresh - Set coalesce interrupt threshold
+ * @portal: portal to set the new value on
+ * @ithresh: new threshold value
+ */
+void qman_dqrr_set_ithresh(struct qman_portal *portal, u8 ithresh);
+
+/**
+ * qman_dqrr_get_iperiod - Get coalesce interrupt period
+ * @portal: portal to get the value for
+ * @iperiod: period pointer
+ */
+void qman_portal_get_iperiod(struct qman_portal *portal, u32 *iperiod);
+
+/**
+ * qman_dqrr_set_iperiod - Set coalesce interrupt period
+ * @portal: portal to set the new value on
+ * @ithresh: new period value
+ */
+void qman_portal_set_iperiod(struct qman_portal *portal, u32 iperiod);
+
#endif /* __FSL_QMAN_H */
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index c32bf91c23e6f81422434057901db1aa8ee25808..562426812ab2a1adac08b03cc3791d71009a5b72 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -134,22 +134,13 @@ enum tegra_io_pad {
TEGRA_IO_PAD_USB2,
TEGRA_IO_PAD_USB3,
TEGRA_IO_PAD_USB_BIAS,
+ TEGRA_IO_PAD_AO_HV,
};
/* deprecated, use TEGRA_IO_PAD_{HDMI,LVDS} instead */
#define TEGRA_IO_RAIL_HDMI TEGRA_IO_PAD_HDMI
#define TEGRA_IO_RAIL_LVDS TEGRA_IO_PAD_LVDS
-/**
- * enum tegra_io_pad_voltage - voltage level of the I/O pad's source rail
- * @TEGRA_IO_PAD_1800000UV: 1.8 V
- * @TEGRA_IO_PAD_3300000UV: 3.3 V
- */
-enum tegra_io_pad_voltage {
- TEGRA_IO_PAD_1800000UV,
- TEGRA_IO_PAD_3300000UV,
-};
-
#ifdef CONFIG_SOC_TEGRA_PMC
int tegra_powergate_is_powered(unsigned int id);
int tegra_powergate_power_on(unsigned int id);
@@ -162,9 +153,6 @@ int tegra_powergate_sequence_power_up(unsigned int id, struct clk *clk,
int tegra_io_pad_power_enable(enum tegra_io_pad id);
int tegra_io_pad_power_disable(enum tegra_io_pad id);
-int tegra_io_pad_set_voltage(enum tegra_io_pad id,
- enum tegra_io_pad_voltage voltage);
-int tegra_io_pad_get_voltage(enum tegra_io_pad id);
/* deprecated, use tegra_io_pad_power_{enable,disable}() instead */
int tegra_io_rail_power_on(unsigned int id);
@@ -212,12 +200,6 @@ static inline int tegra_io_pad_power_disable(enum tegra_io_pad id)
return -ENOSYS;
}
-static inline int tegra_io_pad_set_voltage(enum tegra_io_pad id,
- enum tegra_io_pad_voltage voltage)
-{
- return -ENOSYS;
-}
-
static inline int tegra_io_pad_get_voltage(enum tegra_io_pad id)
{
return -ENOSYS;