diff --git a/CREDITS b/CREDITS
index 370b4c7da39b2bd45ff098dc0b8062255e478ecb..d8fe12a9421fa2a7145e7218cc7d664232d0d7ce 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3814,8 +3814,8 @@ D: INFO-SHEET, former maintainer
D: Author of the longest-living linux bug
N: Jonathan Woithe
-E: jwoithe@physics.adelaide.edu.au
-W: http://www.physics.adelaide.edu.au/~jwoithe
+E: jwoithe@just42.net
+W: http:/www.just42.net/jwoithe
D: ALS-007 sound card extensions to Sound Blaster driver
S: 20 Jordan St
S: Valley View, SA 5093
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 6ae9fec8e07d76440314e4067b3858584adb3512..6df4e6f575609047487a499e7289ff4fa6b0c5d0 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -204,7 +204,7 @@ Contact: Matthew Garrett <mjg@redhat.com>
Description:
Some information about whether a given USB device is
physically fixed to the platform can be inferred from a
- combination of hub decriptor bits and platform-specific data
+ combination of hub descriptor bits and platform-specific data
such as ACPI. This file will read either "removable" or
"fixed" if the information is available, and "unknown"
- otherwise.
\ No newline at end of file
+ otherwise.
diff --git a/Documentation/DocBook/kernel-hacking.tmpl b/Documentation/DocBook/kernel-hacking.tmpl
index 07a9c48de5a2e6ce5f820b4e0123d6de0a4ce4e2..eee71426ecb8e80b627c2db6266252713e7124f5 100644
--- a/Documentation/DocBook/kernel-hacking.tmpl
+++ b/Documentation/DocBook/kernel-hacking.tmpl
@@ -1289,7 +1289,7 @@ static struct block_device_operations opt_fops = {
* Sparc assembly will do this to ya.
*/
C_LABEL(cputypvar):
- .asciz "compatability"
+ .asciz "compatibility"
/* Tested on SS-5, SS-10. Probably someone at Sun applied a spell-checker. */
.align 4
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index 31df1aa0071084ce43b89bc6dd5521524cf5ed24..deb71baed328b3c87410cf7f68d6216d9c8c3a7f 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -918,7 +918,7 @@ and other resources, etc.
<title>HSM violation</title>
<para>
This error is indicated when STATUS value doesn't match HSM
- requirement during issuing or excution any ATA/ATAPI command.
+ requirement during issuing or execution any ATA/ATAPI command.
</para>
<itemizedlist>
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index b84f25e9cc8714a043106ce029bda7e8f0b50a9d..dd03cf4a65393a7b206fd93244a403e775d0c5d5 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -2023,7 +2023,7 @@ Possible values are:</entry>
<entry>integer</entry>
</row>
<row><entry spanname="descr">Cyclic intra macroblock refresh. This is the number of continuous macroblocks
-refreshed every frame. Each frame a succesive set of macroblocks is refreshed until the cycle completes and starts from the
+refreshed every frame. Each frame a successive set of macroblocks is refreshed until the cycle completes and starts from the
top of the frame. Applicable to H264, H263 and MPEG4 encoder.</entry>
</row>
@@ -2183,7 +2183,7 @@ Applicable to the MPEG4 and H264 encoders.</entry>
<entry>integer</entry>
</row>
<row><entry spanname="descr">The Video Buffer Verifier size in kilobytes, it is used as a limitation of frame skip.
-The VBV is defined in the standard as a mean to verify that the produced stream will be succesfully decoded.
+The VBV is defined in the standard as a mean to verify that the produced stream will be successfully decoded.
The standard describes it as "Part of a hypothetical decoder that is conceptually connected to the
output of the encoder. Its purpose is to provide a constraint on the variability of the data rate that an
encoder or editing process may produce.".
@@ -2196,7 +2196,7 @@ Applicable to the MPEG1, MPEG2, MPEG4 encoders.</entry>
<entry>integer</entry>
</row>
<row><entry spanname="descr">The Coded Picture Buffer size in kilobytes, it is used as a limitation of frame skip.
-The CPB is defined in the H264 standard as a mean to verify that the produced stream will be succesfully decoded.
+The CPB is defined in the H264 standard as a mean to verify that the produced stream will be successfully decoded.
Applicable to the H264 encoder.</entry>
</row>
diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt
index d36b01f778b9e450a07a7b49dffab29553faec63..d245f39c3d01c9556443f52e8326cfe906ad2ed4 100644
--- a/Documentation/blackfin/bfin-gpio-notes.txt
+++ b/Documentation/blackfin/bfin-gpio-notes.txt
@@ -53,7 +53,7 @@
3. But there are some exceptions
- Kernel permit the identical GPIO be requested both as GPIO and GPIO
- interrut.
+ interrupt.
Some drivers, like gpio-keys, need this behavior. Kernel only print out
warning messages like,
bfin-gpio: GPIO 24 is already reserved by gpio-keys: BTN0, and you are
diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
index 1ad80d5865a9848c10869814b0cc32118d093fc9..f31b686d45564e17398006841ba4a0ba51816974 100644
--- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
+++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
@@ -1,4 +1,4 @@
-Flexcan CAN contoller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
Required properties:
diff --git a/Documentation/dvb/opera-firmware.txt b/Documentation/dvb/opera-firmware.txt
index 93e784c2607b96c27553047ca56fee8a07a9a350..fb6683188ef7acfac30cffd98ca293071aa83934 100644
--- a/Documentation/dvb/opera-firmware.txt
+++ b/Documentation/dvb/opera-firmware.txt
@@ -8,7 +8,7 @@ from the windriver disk into this directory.
Then run
-./get_dvb_firware opera1
+./get_dvb_firmware opera1
and after that you have 2 files:
@@ -24,4 +24,4 @@ After that the driver can load the firmware
in kernel config and have hotplug running).
-Marco Gittler <g.marco@freenet.de>
\ No newline at end of file
+Marco Gittler <g.marco@freenet.de>
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index fdcc49fad8e11d3bb1c00b6033da3a35f33516c6..03df2b0203320d3451fad0765bb11e95661392f8 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -734,7 +734,7 @@ were done at i7core_edac driver. This chapter will cover those differences
associated with a physical CPU socket.
Each MC have 3 physical read channels, 3 physical write channels and
- 3 logic channels. The driver currenty sees it as just 3 channels.
+ 3 logic channels. The driver currently sees it as just 3 channels.
Each channel can have up to 3 DIMMs.
The minimum known unity is DIMMs. There are no information about csrows.
diff --git a/Documentation/filesystems/nfs/pnfs.txt b/Documentation/filesystems/nfs/pnfs.txt
index c7919c6e3beabf9390714175cbc22d047b05025f..52ae07f5f578bc44af9bf02b1bc3530510750fdc 100644
--- a/Documentation/filesystems/nfs/pnfs.txt
+++ b/Documentation/filesystems/nfs/pnfs.txt
@@ -93,7 +93,7 @@ The API to the login script is as follows:
(allways exists)
(More protocols can be defined in the future.
The client does not interpret this string it is
- passed unchanged as recieved from the Server)
+ passed unchanged as received from the Server)
-o osdname of the requested target OSD
(Might be empty)
(A string which denotes the OSD name, there is a
diff --git a/Documentation/filesystems/qnx6.txt b/Documentation/filesystems/qnx6.txt
index 050223ea03c745cd0ed952427d182f54f130807e..e59f2f09f56ea6bbf1e7842db148470794e83cda 100644
--- a/Documentation/filesystems/qnx6.txt
+++ b/Documentation/filesystems/qnx6.txt
@@ -17,7 +17,7 @@ concepts of blocks, inodes and directories.
On QNX it is possible to create little endian and big endian qnx6 filesystems.
This feature makes it possible to create and use a different endianness fs
for the target (QNX is used on quite a range of embedded systems) plattform
-running on a different endianess.
+running on a different endianness.
The Linux driver handles endianness transparently. (LE and BE)
Blocks
@@ -26,7 +26,7 @@ Blocks
The space in the device or file is split up into blocks. These are a fixed
size of 512, 1024, 2048 or 4096, which is decided when the filesystem is
created.
-Blockpointers are 32bit, so the maximum space that can be adressed is
+Blockpointers are 32bit, so the maximum space that can be addressed is
2^32 * 4096 bytes or 16TB
The superblocks
@@ -47,16 +47,16 @@ inactive superblock.
Each superblock holds a set of root inodes for the different filesystem
parts. (Inode, Bitmap and Longfilenames)
Each of these root nodes holds information like total size of the stored
-data and the adressing levels in that specific tree.
-If the level value is 0, up to 16 direct blocks can be adressed by each
+data and the addressing levels in that specific tree.
+If the level value is 0, up to 16 direct blocks can be addressed by each
node.
-Level 1 adds an additional indirect adressing level where each indirect
-adressing block holds up to blocksize / 4 bytes pointers to data blocks.
-Level 2 adds an additional indirect adressig block level (so, already up
-to 16 * 256 * 256 = 1048576 blocks that can be adressed by such a tree)a
+Level 1 adds an additional indirect addressing level where each indirect
+addressing block holds up to blocksize / 4 bytes pointers to data blocks.
+Level 2 adds an additional indirect addressing block level (so, already up
+to 16 * 256 * 256 = 1048576 blocks that can be addressed by such a tree).
Unused block pointers are always set to ~0 - regardless of root node,
-indirect adressing blocks or inodes.
+indirect addressing blocks or inodes.
Data leaves are always on the lowest level. So no data is stored on upper
tree levels.
@@ -64,7 +64,7 @@ The first Superblock is located at 0x2000. (0x2000 is the bootblock size)
The Audi MMI 3G first superblock directly starts at byte 0.
Second superblock position can either be calculated from the superblock
information (total number of filesystem blocks) or by taking the highest
-device address, zeroing the last 3 bytes and then substracting 0x1000 from
+device address, zeroing the last 3 bytes and then subtracting 0x1000 from
that address.
0x1000 is the size reserved for each superblock - regardless of the
@@ -83,8 +83,8 @@ size, number of blocks used, access time, change time and modification time.
Object mode field is POSIX format. (which makes things easier)
There are also pointers to the first 16 blocks, if the object data can be
-adressed with 16 direct blocks.
-For more than 16 blocks an indirect adressing in form of another tree is
+addressed with 16 direct blocks.
+For more than 16 blocks an indirect addressing in form of another tree is
used. (scheme is the same as the one used for the superblock root nodes)
The filesize is stored 64bit. Inode counting starts with 1. (whilst long
@@ -118,13 +118,13 @@ no block pointers and the directory file record pointing to the target file
inode.
Character and block special devices do not exist in QNX as those files
-are handled by the QNX kernel/drivers and created in /dev independant of the
+are handled by the QNX kernel/drivers and created in /dev independent of the
underlaying filesystem.
Long filenames
--------------
-Long filenames are stored in a seperate adressing tree. The staring point
+Long filenames are stored in a separate addressing tree. The staring point
is the longfilename root node in the active superblock.
Each data block (tree leaves) holds one long filename. That filename is
limited to 510 bytes. The first two starting bytes are used as length field
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 23b7def21ba8bc5fe9e797e2b4cce1b94245d969..fba74557168491515001122baa170613f0658bca 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -63,7 +63,7 @@ Module Parameters
Hardware Interfaces
-------------------
-All the chips suported by this driver are LPC Super-I/O chips, accessed
+All the chips supported by this driver are LPC Super-I/O chips, accessed
through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
SMBus interface to the hardware monitoring functions. This driver no
longer supports this interface though, as it is slower and less reliable
diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x
index 24f47d8f6a42a58555faa13e7dbef4554c1e8b27..11446757c8c8c0abb5b7e30e2bc630238a900356 100644
--- a/Documentation/hwmon/wm831x
+++ b/Documentation/hwmon/wm831x
@@ -22,7 +22,7 @@ reporting of all the input values but does not provide any alarms.
Voltage Monitoring
------------------
-Voltages are sampled by a 12 bit ADC. Voltages in milivolts are 1.465
+Voltages are sampled by a 12 bit ADC. Voltages in millivolts are 1.465
times the ADC value.
Temperature Monitoring
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index 8f485d72cf2582f32de715f3ea398127120488bc..6d0c2519cf4728044536aae4615a91adf1c4e6c9 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -341,7 +341,7 @@ Need more implementation yet....
--------------------------------
8. Memory hotplug event notifier
--------------------------------
-Memory hotplug has event notifer. There are 6 types of notification.
+Memory hotplug has event notifier. There are 6 types of notification.
MEMORY_GOING_ONLINE
Generated before new memory becomes available in order to be able to
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 56ca3b75376ea471adc9a88c9aaa2c953d2c3a44..ac295399f0d4e99d9042d32c3a0a8ebf137c72cc 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -649,7 +649,7 @@ solution for a couple of reasons:
The CAN device must be configured via netlink interface. The supported
netlink message types are defined and briefly described in
"include/linux/can/netlink.h". CAN link support for the program "ip"
- of the IPROUTE2 utility suite is avaiable and it can be used as shown
+ of the IPROUTE2 utility suite is available and it can be used as shown
below:
- Setting CAN device properties:
diff --git a/Documentation/parisc/debugging b/Documentation/parisc/debugging
index d728594058e59b423c12192e948e6ccf86bc73bf..7d75223fa18d6b9347d97992d4d4c0e519a28922 100644
--- a/Documentation/parisc/debugging
+++ b/Documentation/parisc/debugging
@@ -34,6 +34,6 @@ registers interruption handlers read to find out where the machine
was interrupted - so if you get an interruption between the instruction
that clears the Q bit and the RFI that sets it again you don't know
where exactly it happened. If you're lucky the IAOQ will point to the
-instrucion that cleared the Q bit, if you're not it points anywhere
+instruction that cleared the Q bit, if you're not it points anywhere
at all. Usually Q bit problems will show themselves in unexplainable
system hangs or running off the end of physical memory.
diff --git a/Documentation/sound/alsa/compress_offload.txt b/Documentation/sound/alsa/compress_offload.txt
index c83a835350f096e08389f04db51c69b92758dd61..90e9b3a11abc081e2ef1adfc2d4ddbd7131e0741 100644
--- a/Documentation/sound/alsa/compress_offload.txt
+++ b/Documentation/sound/alsa/compress_offload.txt
@@ -18,7 +18,7 @@ processing. Support for such hardware has not been very good in Linux,
mostly because of a lack of a generic API available in the mainline
kernel.
-Rather than requiring a compability break with an API change of the
+Rather than requiring a compatibility break with an API change of the
ALSA PCM interface, a new 'Compressed Data' API is introduced to
provide a control and data-streaming interface for audio DSPs.
diff --git a/Documentation/sound/oss/ALS b/Documentation/sound/oss/ALS
index d01ffbfd58080943378e685cc026d341eb0fd25f..bf10bed4574bc7dd130a54918bb4717c54749450 100644
--- a/Documentation/sound/oss/ALS
+++ b/Documentation/sound/oss/ALS
@@ -57,10 +57,10 @@ The resulting sound driver will provide the following capabilities:
DSP/PCM/audio out (L&R), FM (L&R) and Mic in (mono).
Jonathan Woithe
-jwoithe@physics.adelaide.edu.au
+jwoithe@just42.net
30 March 1998
Modified 2000-02-26 by Dave Forrest, drf5n@virginia.edu to add ALS100/ALS200
Modified 2000-04-10 by Paul Laufer, pelaufer@csupomona.edu to add ISAPnP info.
-Modified 2000-11-19 by Jonathan Woithe, jwoithe@physics.adelaide.edu.au
+Modified 2000-11-19 by Jonathan Woithe, jwoithe@just42.net
- updated information for kernel 2.4.x.
diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt
index d93f3c00f245b7bbd674ee540fca74da753b1233..9f5263d3152ccff97605234c8b0fe0417b160c59 100644
--- a/Documentation/static-keys.txt
+++ b/Documentation/static-keys.txt
@@ -235,7 +235,7 @@ label case adds:
6 (mov) + 2 (test) + 2 (jne) = 10 - 5 (5 byte jump 0) = 5 addition bytes.
If we then include the padding bytes, the jump label code saves, 16 total bytes
-of instruction memory for this small fucntion. In this case the non-jump label
+of instruction memory for this small function. In this case the non-jump label
function is 80 bytes long. Thus, we have have saved 20% of the instruction
footprint. We can in fact improve this even further, since the 5-byte no-op
really can be a 2-byte no-op since we can reach the branch with a 2-byte jmp.
diff --git a/Documentation/usb/dwc3.txt b/Documentation/usb/dwc3.txt
index 7b590edae14579b09512deb3116231f24213ea82..1d02c01d1c7cb9ff6067d9bf6da89e958d92640a 100644
--- a/Documentation/usb/dwc3.txt
+++ b/Documentation/usb/dwc3.txt
@@ -28,7 +28,7 @@ Please pick something while reading :)
none
- primary handler of the EP-interrupt
- reads the event and tries to process it. Everything that requries
+ reads the event and tries to process it. Everything that requires
sleeping is handed over to the Thread. The event is saved in an
per-endpoint data-structure.
We probably have to pay attention not to process events once we
diff --git a/Documentation/usb/wusb-cbaf b/Documentation/usb/wusb-cbaf
index 426ddaaef96f423812579908992cc464b15044bf..8b3d43efce900020fb36c364835fc3b9cf256286 100644
--- a/Documentation/usb/wusb-cbaf
+++ b/Documentation/usb/wusb-cbaf
@@ -36,7 +36,7 @@ COMMAND/ARGS are
get-cdid DEVICE
- Get the device ID associated to the HOST-CHDI we sent with
+ Get the device ID associated to the HOST-CHID we sent with
'set-chid'. We might not know about it.
set-cc DEVICE
diff --git a/Documentation/video4linux/README.cpia2 b/Documentation/video4linux/README.cpia2
index ce8213d28b67461e4b3d532e7d317d458c110f43..38e742fd0df7af2b6c1589eaacf07037bec1ee98 100644
--- a/Documentation/video4linux/README.cpia2
+++ b/Documentation/video4linux/README.cpia2
@@ -12,7 +12,7 @@ gqcam application to view this stream.
The driver is implemented as two kernel modules. The cpia2 module
contains the camera functions and the V4L interface. The cpia2_usb module
contains usb specific functions. The main reason for this was the size of the
-module was getting out of hand, so I separted them. It is not likely that
+module was getting out of hand, so I separated them. It is not likely that
there will be a parallel port version.
FEATURES:
diff --git a/MAINTAINERS b/MAINTAINERS
index aa067a95ce116e60bf14b4e1aabc4a354d937409..591a10c11257c44e8acd5fc312a4e3e089e6b61c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2912,7 +2912,7 @@ S: Maintained
F: arch/frv/
FUJITSU LAPTOP EXTRAS
-M: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
+M: Jonathan Woithe <jwoithe@just42.net>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/fujitsu-laptop.c
diff --git a/Makefile b/Makefile
index 0e7a44eaadd595be311cd416c404a1b1eee2b543..546515cd07f30c5354946991ecd382b183a02471 100644
--- a/Makefile
+++ b/Makefile
@@ -400,8 +400,10 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve
# Files to ignore in find ... statements
-RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
-export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
+ -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
+ --exclude CVS --exclude .pc --exclude .hg --exclude .git
# ===========================================================================
# Rules shared between *config targets and build targets
@@ -966,7 +968,7 @@ prepare3: include/config/kernel.release
ifneq ($(KBUILD_SRC),)
@$(kecho) ' Using $(srctree) as source for kernel'
$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
- echo " $(srctree) is not clean, please run 'make mrproper'";\
+ echo " $(srctree) is not clean, please run 'make mrproper'"; \
echo " in the '$(srctree)' directory.";\
/bin/false; \
fi;
@@ -1003,8 +1005,8 @@ define filechk_utsrelease.h
endef
define filechk_version.h
- (echo \#define LINUX_VERSION_CODE $(shell \
- expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
+ (echo \#define LINUX_VERSION_CODE $(shell \
+ expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
endef
diff --git a/README b/README
index 0d5a7ddbe3ee8d108bf7079909ddcec30dfb4560..9beaed0ed620b31495a89c79fd12f7f926f7d902 100644
--- a/README
+++ b/README
@@ -1,4 +1,4 @@
- Linux kernel release 3.x <http://kernel.org/>
+ Linux kernel release 3.x <http://kernel.org/>
These are the release notes for Linux version 3. Read them carefully,
as they tell you what this is all about, explain how to install the
@@ -62,13 +62,13 @@ INSTALLING the kernel source:
directory where you have permissions (eg. your home directory) and
unpack it:
- gzip -cd linux-3.X.tar.gz | tar xvf -
+ gzip -cd linux-3.X.tar.gz | tar xvf -
or
- bzip2 -dc linux-3.X.tar.bz2 | tar xvf -
+ bzip2 -dc linux-3.X.tar.bz2 | tar xvf -
- Replace "XX" with the version number of the latest kernel.
+ Replace "X" with the version number of the latest kernel.
Do NOT use the /usr/src/linux area! This area has a (usually
incomplete) set of kernel headers that are used by the library header
@@ -78,49 +78,43 @@ INSTALLING the kernel source:
- You can also upgrade between 3.x releases by patching. Patches are
distributed in the traditional gzip and the newer bzip2 format. To
install by patching, get all the newer patch files, enter the
- top level directory of the kernel source (linux-3.x) and execute:
+ top level directory of the kernel source (linux-3.X) and execute:
- gzip -cd ../patch-3.x.gz | patch -p1
+ gzip -cd ../patch-3.x.gz | patch -p1
or
- bzip2 -dc ../patch-3.x.bz2 | patch -p1
- (repeat xx for all versions bigger than the version of your current
- source tree, _in_order_) and you should be ok. You may want to remove
- the backup files (xxx~ or xxx.orig), and make sure that there are no
- failed patches (xxx# or xxx.rej). If there are, either you or me has
- made a mistake.
+ bzip2 -dc ../patch-3.x.bz2 | patch -p1
+
+ Replace "x" for all versions bigger than the version "X" of your current
+ source tree, _in_order_, and you should be ok. You may want to remove
+ the backup files (some-file-name~ or some-file-name.orig), and make sure
+ that there are no failed patches (some-file-name# or some-file-name.rej).
+ If there are, either you or I have made a mistake.
Unlike patches for the 3.x kernels, patches for the 3.x.y kernels
(also known as the -stable kernels) are not incremental but instead apply
- directly to the base 3.x kernel. Please read
- Documentation/applying-patches.txt for more information.
+ directly to the base 3.x kernel. For example, if your base kernel is 3.0
+ and you want to apply the 3.0.3 patch, you must not first apply the 3.0.1
+ and 3.0.2 patches. Similarly, if you are running kernel version 3.0.2 and
+ want to jump to 3.0.3, you must first reverse the 3.0.2 patch (that is,
+ patch -R) _before_ applying the 3.0.3 patch. You can read more on this in
+ Documentation/applying-patches.txt
Alternatively, the script patch-kernel can be used to automate this
process. It determines the current kernel version and applies any
patches found.
- linux/scripts/patch-kernel linux
+ linux/scripts/patch-kernel linux
The first argument in the command above is the location of the
kernel source. Patches are applied from the current directory, but
an alternative directory can be specified as the second argument.
- - If you are upgrading between releases using the stable series patches
- (for example, patch-3.x.y), note that these "dot-releases" are
- not incremental and must be applied to the 3.x base tree. For
- example, if your base kernel is 3.0 and you want to apply the
- 3.0.3 patch, you do not and indeed must not first apply the
- 3.0.1 and 3.0.2 patches. Similarly, if you are running kernel
- version 3.0.2 and want to jump to 3.0.3, you must first
- reverse the 3.0.2 patch (that is, patch -R) _before_ applying
- the 3.0.3 patch.
- You can read more on this in Documentation/applying-patches.txt
-
- Make sure you have no stale .o files and dependencies lying around:
- cd linux
- make mrproper
+ cd linux
+ make mrproper
You should now have the sources correctly installed.
@@ -137,21 +131,23 @@ SOFTWARE REQUIREMENTS
BUILD directory for the kernel:
- When compiling the kernel all output files will per default be
+ When compiling the kernel, all output files will per default be
stored together with the kernel source code.
Using the option "make O=output/dir" allow you to specify an alternate
place for the output files (including .config).
Example:
- kernel source code: /usr/src/linux-3.N
- build directory: /home/name/build/kernel
- To configure and build the kernel use:
- cd /usr/src/linux-3.N
- make O=/home/name/build/kernel menuconfig
- make O=/home/name/build/kernel
- sudo make O=/home/name/build/kernel modules_install install
+ kernel source code: /usr/src/linux-3.X
+ build directory: /home/name/build/kernel
+
+ To configure and build the kernel, use:
- Please note: If the 'O=output/dir' option is used then it must be
+ cd /usr/src/linux-3.X
+ make O=/home/name/build/kernel menuconfig
+ make O=/home/name/build/kernel
+ sudo make O=/home/name/build/kernel modules_install install
+
+ Please note: If the 'O=output/dir' option is used, then it must be
used for all invocations of make.
CONFIGURING the kernel:
@@ -163,61 +159,78 @@ CONFIGURING the kernel:
new version with minimal work, use "make oldconfig", which will
only ask you for the answers to new questions.
- - Alternate configuration commands are:
- "make config" Plain text interface.
- "make menuconfig" Text based color menus, radiolists & dialogs.
- "make nconfig" Enhanced text based color menus.
- "make xconfig" X windows (Qt) based configuration tool.
- "make gconfig" X windows (Gtk) based configuration tool.
- "make oldconfig" Default all questions based on the contents of
- your existing ./.config file and asking about
- new config symbols.
- "make silentoldconfig"
- Like above, but avoids cluttering the screen
- with questions already answered.
- Additionally updates the dependencies.
- "make defconfig" Create a ./.config file by using the default
- symbol values from either arch/$ARCH/defconfig
- or arch/$ARCH/configs/${PLATFORM}_defconfig,
- depending on the architecture.
- "make ${PLATFORM}_defconfig"
- Create a ./.config file by using the default
- symbol values from
- arch/$ARCH/configs/${PLATFORM}_defconfig.
- Use "make help" to get a list of all available
- platforms of your architecture.
- "make allyesconfig"
- Create a ./.config file by setting symbol
- values to 'y' as much as possible.
- "make allmodconfig"
- Create a ./.config file by setting symbol
- values to 'm' as much as possible.
- "make allnoconfig" Create a ./.config file by setting symbol
- values to 'n' as much as possible.
- "make randconfig" Create a ./.config file by setting symbol
- values to random values.
+ - Alternative configuration commands are:
+
+ "make config" Plain text interface.
+
+ "make menuconfig" Text based color menus, radiolists & dialogs.
+
+ "make nconfig" Enhanced text based color menus.
+
+ "make xconfig" X windows (Qt) based configuration tool.
+
+ "make gconfig" X windows (Gtk) based configuration tool.
+
+ "make oldconfig" Default all questions based on the contents of
+ your existing ./.config file and asking about
+ new config symbols.
+
+ "make silentoldconfig"
+ Like above, but avoids cluttering the screen
+ with questions already answered.
+ Additionally updates the dependencies.
+
+ "make defconfig" Create a ./.config file by using the default
+ symbol values from either arch/$ARCH/defconfig
+ or arch/$ARCH/configs/${PLATFORM}_defconfig,
+ depending on the architecture.
+
+ "make ${PLATFORM}_defconfig"
+ Create a ./.config file by using the default
+ symbol values from
+ arch/$ARCH/configs/${PLATFORM}_defconfig.
+ Use "make help" to get a list of all available
+ platforms of your architecture.
+
+ "make allyesconfig"
+ Create a ./.config file by setting symbol
+ values to 'y' as much as possible.
+
+ "make allmodconfig"
+ Create a ./.config file by setting symbol
+ values to 'm' as much as possible.
+
+ "make allnoconfig" Create a ./.config file by setting symbol
+ values to 'n' as much as possible.
+
+ "make randconfig" Create a ./.config file by setting symbol
+ values to random values.
You can find more information on using the Linux kernel config tools
in Documentation/kbuild/kconfig.txt.
- NOTES on "make config":
- - having unnecessary drivers will make the kernel bigger, and can
- under some circumstances lead to problems: probing for a
- nonexistent controller card may confuse your other controllers
- - compiling the kernel with "Processor type" set higher than 386
- will result in a kernel that does NOT work on a 386. The
- kernel will detect this on bootup, and give up.
- - A kernel with math-emulation compiled in will still use the
- coprocessor if one is present: the math emulation will just
- never get used in that case. The kernel will be slightly larger,
- but will work on different machines regardless of whether they
- have a math coprocessor or not.
- - the "kernel hacking" configuration details usually result in a
- bigger or slower kernel (or both), and can even make the kernel
- less stable by configuring some routines to actively try to
- break bad code to find kernel problems (kmalloc()). Thus you
- should probably answer 'n' to the questions for
- "development", "experimental", or "debugging" features.
+ - NOTES on "make config":
+
+ - Having unnecessary drivers will make the kernel bigger, and can
+ under some circumstances lead to problems: probing for a
+ nonexistent controller card may confuse your other controllers
+
+ - Compiling the kernel with "Processor type" set higher than 386
+ will result in a kernel that does NOT work on a 386. The
+ kernel will detect this on bootup, and give up.
+
+ - A kernel with math-emulation compiled in will still use the
+ coprocessor if one is present: the math emulation will just
+ never get used in that case. The kernel will be slightly larger,
+ but will work on different machines regardless of whether they
+ have a math coprocessor or not.
+
+ - The "kernel hacking" configuration details usually result in a
+ bigger or slower kernel (or both), and can even make the kernel
+ less stable by configuring some routines to actively try to
+ break bad code to find kernel problems (kmalloc()). Thus you
+ should probably answer 'n' to the questions for "development",
+ "experimental", or "debugging" features.
COMPILING the kernel:
@@ -230,7 +243,7 @@ COMPILING the kernel:
possible to do "make install" if you have lilo installed to suit the
kernel makefiles, but you may want to check your particular lilo setup first.
- To do the actual install you have to be root, but none of the normal
+ To do the actual install, you have to be root, but none of the normal
build should require that. Don't take the name of root in vain.
- If you configured any of the parts of the kernel as `modules', you
@@ -238,13 +251,13 @@ COMPILING the kernel:
- Verbose kernel compile/build output:
- Normally the kernel build system runs in a fairly quiet mode (but not
+ Normally, the kernel build system runs in a fairly quiet mode (but not
totally silent). However, sometimes you or other kernel developers need
to see compile, link, or other commands exactly as they are executed.
For this, use "verbose" build mode. This is done by inserting
"V=1" in the "make" command. E.g.:
- make V=1 all
+ make V=1 all
To have the build system also tell the reason for the rebuild of each
target, use "V=2". The default is "V=0".
@@ -256,6 +269,7 @@ COMPILING the kernel:
are installing a new kernel with the same version number as your
working kernel, make a backup of your modules directory before you
do a "make modules_install".
+
Alternatively, before compiling, use the kernel config option
"LOCALVERSION" to append a unique suffix to the regular kernel version.
LOCALVERSION can be set in the "General Setup" menu.
@@ -267,7 +281,7 @@ COMPILING the kernel:
- Booting a kernel directly from a floppy without the assistance of a
bootloader such as LILO, is no longer supported.
- If you boot Linux from the hard drive, chances are you use LILO which
+ If you boot Linux from the hard drive, chances are you use LILO, which
uses the kernel image as specified in the file /etc/lilo.conf. The
kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
/boot/bzImage. To use the new kernel, save a copy of the old image
@@ -306,21 +320,21 @@ IF SOMETHING GOES WRONG:
- If the bug results in a message like
- unable to handle kernel paging request at address C0000010
- Oops: 0002
- EIP: 0010:XXXXXXXX
- eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx
- esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx
- ds: xxxx es: xxxx fs: xxxx gs: xxxx
- Pid: xx, process nr: xx
- xx xx xx xx xx xx xx xx xx xx
+ unable to handle kernel paging request at address C0000010
+ Oops: 0002
+ EIP: 0010:XXXXXXXX
+ eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx
+ esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx
+ ds: xxxx es: xxxx fs: xxxx gs: xxxx
+ Pid: xx, process nr: xx
+ xx xx xx xx xx xx xx xx xx xx
or similar kernel debugging information on your screen or in your
system log, please duplicate it *exactly*. The dump may look
incomprehensible to you, but it does contain information that may
help debugging the problem. The text above the dump is also
important: it tells something about why the kernel dumped code (in
- the above example it's due to a bad kernel pointer). More information
+ the above example, it's due to a bad kernel pointer). More information
on making sense of the dump is in Documentation/oops-tracing.txt
- If you compiled the kernel with CONFIG_KALLSYMS you can send the dump
@@ -328,7 +342,7 @@ IF SOMETHING GOES WRONG:
sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred).
This utility can be downloaded from
ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops/ .
- Alternately you can do the dump lookup by hand:
+ Alternatively, you can do the dump lookup by hand:
- In debugging dumps like the above, it helps enormously if you can
look up what the EIP value means. The hex value as such doesn't help
@@ -342,7 +356,7 @@ IF SOMETHING GOES WRONG:
the file 'linux/vmlinux'. To extract the namelist and match it against
the EIP from the kernel crash, do:
- nm vmlinux | sort | less
+ nm vmlinux | sort | less
This will give you a list of kernel addresses sorted in ascending
order, from which it is simple to find the function that contains the
@@ -361,7 +375,7 @@ IF SOMETHING GOES WRONG:
kernel image or similar), telling me as much about your setup as
possible will help. Please read the REPORTING-BUGS document for details.
- - Alternately, you can use gdb on a running kernel. (read-only; i.e. you
+ - Alternatively, you can use gdb on a running kernel. (read-only; i.e. you
cannot change values or set break points.) To do this, first compile the
kernel with -g; edit arch/i386/Makefile appropriately, then do a "make
clean". You'll also need to enable CONFIG_PROC_FS (via "make config").
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index cd634795aa9cda898c4f129b46e94e7d1475c785..3f844d26d2c71e072d28fb71a232e444daba281b 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -236,7 +236,7 @@ static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
ok = 0;
/* If both conditions above are met, we are fine. */
- DBGA("pci_dac_dma_supported %s from %p\n",
+ DBGA("pci_dac_dma_supported %s from %pf\n",
ok ? "yes" : "no", __builtin_return_address(0));
return ok;
@@ -268,7 +268,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
&& paddr + size <= __direct_map_size) {
ret = paddr + __direct_map_base;
- DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %p\n",
+ DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %pf\n",
cpu_addr, size, ret, __builtin_return_address(0));
return ret;
@@ -279,7 +279,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
if (dac_allowed) {
ret = paddr + alpha_mv.pci_dac_offset;
- DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %p\n",
+ DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %pf\n",
cpu_addr, size, ret, __builtin_return_address(0));
return ret;
@@ -316,7 +316,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
ret = arena->dma_base + dma_ofs * PAGE_SIZE;
ret += (unsigned long)cpu_addr & ~PAGE_MASK;
- DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %p\n",
+ DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %pf\n",
cpu_addr, size, npages, ret, __builtin_return_address(0));
return ret;
@@ -385,14 +385,14 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
&& dma_addr < __direct_map_base + __direct_map_size) {
/* Nothing to do. */
- DBGA2("pci_unmap_single: direct [%llx,%zx] from %p\n",
+ DBGA2("pci_unmap_single: direct [%llx,%zx] from %pf\n",
dma_addr, size, __builtin_return_address(0));
return;
}
if (dma_addr > 0xffffffff) {
- DBGA2("pci64_unmap_single: DAC [%llx,%zx] from %p\n",
+ DBGA2("pci64_unmap_single: DAC [%llx,%zx] from %pf\n",
dma_addr, size, __builtin_return_address(0));
return;
}
@@ -424,7 +424,7 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
spin_unlock_irqrestore(&arena->lock, flags);
- DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %p\n",
+ DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %pf\n",
dma_addr, size, npages, __builtin_return_address(0));
}
@@ -447,7 +447,7 @@ static void *alpha_pci_alloc_coherent(struct device *dev, size_t size,
cpu_addr = (void *)__get_free_pages(gfp, order);
if (! cpu_addr) {
printk(KERN_INFO "pci_alloc_consistent: "
- "get_free_pages failed from %p\n",
+ "get_free_pages failed from %pf\n",
__builtin_return_address(0));
/* ??? Really atomic allocation? Otherwise we could play
with vmalloc and sg if we can't find contiguous memory. */
@@ -466,7 +466,7 @@ static void *alpha_pci_alloc_coherent(struct device *dev, size_t size,
goto try_again;
}
- DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %p\n",
+ DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %pf\n",
size, cpu_addr, *dma_addrp, __builtin_return_address(0));
return cpu_addr;
@@ -486,7 +486,7 @@ static void alpha_pci_free_coherent(struct device *dev, size_t size,
pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
free_pages((unsigned long)cpu_addr, get_order(size));
- DBGA2("pci_free_consistent: [%llx,%zx] from %p\n",
+ DBGA2("pci_free_consistent: [%llx,%zx] from %pf\n",
dma_addr, size, __builtin_return_address(0));
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0a2fc01891a90d5e49fa7a04256b0cbe2e608c98..76edcfe8b56f3d6ecad86a7fadeebbcef0b20d3d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1914,10 +1914,10 @@ choice
default ZBOOT_ROM_NONE
help
Include experimental SD/MMC loading code in the ROM-able zImage.
- With this enabled it is possible to write the the ROM-able zImage
+ With this enabled it is possible to write the ROM-able zImage
kernel image to an MMC or SD card and boot the kernel straight
from the reset vector. At reset the processor Mask ROM will load
- the first part of the the ROM-able zImage which in turn loads the
+ the first part of the ROM-able zImage which in turn loads the
rest the kernel image to RAM.
config ZBOOT_ROM_NONE
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 82c0915729eeb1741c647ebe80a492d5df7475f1..06ca1cd4cae29a2f6db4485ec0316c47236676df 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -210,7 +210,7 @@ config SMDK6410_WM1190_EV1
and audio daughtercard for the Samsung SMDK6410 reference
platform. Enabling this option will build support for this
module into the kernel. The presence of the module will be
- detected at runtime so the the resulting kernel can be used
+ detected at runtime so the resulting kernel can be used
with or without the 1190-EV1 fitted.
config SMDK6410_WM1192_EV1
@@ -226,7 +226,7 @@ config SMDK6410_WM1192_EV1
daughtercard for the Samsung SMDK6410 reference platform.
Enabling this option will build support for this module into
the kernel. The presence of the daughtercard will be
- detected at runtime so the the resulting kernel can be used
+ detected at runtime so the resulting kernel can be used
with or without the 1192-EV1 fitted.
config MACH_NCP
diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c
index cb7658e8acc51be86e898eb6ec217f70bd521ff9..4e729f055a81473ca1422d1f2dd56f0f20cd22e1 100644
--- a/arch/arm/nwfpe/fpmodule.c
+++ b/arch/arm/nwfpe/fpmodule.c
@@ -147,7 +147,7 @@ void float_raise(signed char flags)
#ifdef CONFIG_DEBUG_USER
if (flags & debug)
printk(KERN_DEBUG
- "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
+ "NWFPE: %s[%d] takes exception %08x at %pf from %08lx\n",
current->comm, current->pid, flags,
__builtin_return_address(0), GET_USERREG()->ARM_pc);
#endif
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 7f3c589cc0243db4641fd735d4e18f290206e96f..79cfe2614bcc871f7faff8fd8c0d6f2c02b54fe8 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1309,7 +1309,7 @@ config PM_BFIN_WAKE_GP
(all processors, except ADSP-BF549). This option sets
the general-purpose wake-up enable (GPWE) control bit to enable
wake-up upon detection of an active low signal on the /GPW (PH7) pin.
- On ADSP-BF549 this option enables the the same functionality on the
+ On ADSP-BF549 this option enables the same functionality on the
/MRXON pin also PH7.
config PM_BFIN_WAKE_PA15
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 8a9c767125a4758b27e08f1488e27fa8b85ad258..51b3274cbe71db37503134f1e25cc31b4992fdda 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -7,7 +7,7 @@ choice
help
The Freescale (was Motorola) M68K family of processors implements
the full 68000 processor instruction set.
- The Freescale ColdFire family of processors is a modern derivitive
+ The Freescale ColdFire family of processors is a modern derivative
of the 68000 processor family. They are mainly targeted at embedded
applications, and are all System-On-Chip (SOC) devices, as opposed
to stand alone CPUs. They implement a subset of the original 68000
diff --git a/arch/m68k/platform/coldfire/m532x.c b/arch/m68k/platform/coldfire/m532x.c
index 8e9476d59a6516e42efb49069b415f6f3c56e773..5394223639f8f5d5bc4c508895562d9075394d20 100644
--- a/arch/m68k/platform/coldfire/m532x.c
+++ b/arch/m68k/platform/coldfire/m532x.c
@@ -7,7 +7,7 @@
* Copyright (C) 2000, Lineo (www.lineo.com)
* Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
* Copyright Freescale Semiconductor, Inc 2006
- * Copyright (c) 2006, emlix, Sebastian Hess <sh@emlix.com>
+ * Copyright (c) 2006, emlix, Sebastian Hess <shess@hessware.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 186fc8cf9ee0b37c4ef7def5d423cb67e8f6db77..f5e121213c229dd289bef22129d10337a97c54fa 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1002,12 +1002,12 @@ config HOLES_IN_ZONE
bool
#
-# Endianess selection. Sufficiently obscure so many users don't know what to
+# Endianness selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
# choice statement should be more obvious to the user.
#
choice
- prompt "Endianess selection"
+ prompt "Endianness selection"
help
Some MIPS machines can be configured for either little or big endian
byte order. These modes require different kernels and a different
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 83ed00a5644ac1b72286adbf81a95b40219462ba..5a43aa0798caa7da84f48af3513f02160bd61997 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -57,7 +57,7 @@ config CMDLINE
options.
config CMDLINE_OVERRIDE
- bool "Built-in command line overrides firware arguments"
+ bool "Built-in command line overrides firmware arguments"
default n
depends on CMDLINE_BOOL
help
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 7f3376b1c2197f509cd9dcd85fcbc3e7e3173842..6ded9bd1489cb176e11779d10e68bc4134e43488 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -209,7 +209,7 @@ void mips_mt_set_cpuoptions(void)
unsigned int nconfig7 = oconfig7;
if (mt_opt_norps) {
- printk("\"norps\" option deprectated: use \"rpsctl=\"\n");
+ printk("\"norps\" option deprecated: use \"rpsctl=\"\n");
}
if (mt_opt_rpsctl >= 0) {
printk("34K return prediction stack override set to %d.\n",
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
index d2fa98f3c78d8185d6bfec384b88e23720829b88..c429a5bc080fdfca9fd9c40eb61c5cdb9b8198d6 100644
--- a/arch/mips/lantiq/xway/gpio.c
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -188,7 +188,7 @@ int __init ltq_gpio_init(void)
int ret = platform_driver_register(<q_gpio_driver);
if (ret)
- pr_info("ltq_gpio : Error registering platfom driver!");
+ pr_info("ltq_gpio : Error registering platform driver!");
return ret;
}
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
index b91c7f17f10f043ae906c322e12669438e7f562a..aae17170472f40625b43f849bacb3bdb3d87ef97 100644
--- a/arch/mips/lantiq/xway/gpio_ebu.c
+++ b/arch/mips/lantiq/xway/gpio_ebu.c
@@ -119,7 +119,7 @@ static int __init ltq_ebu_init(void)
int ret = platform_driver_register(<q_ebu_driver);
if (ret)
- pr_info("ltq_ebu : Error registering platfom driver!");
+ pr_info("ltq_ebu : Error registering platform driver!");
return ret;
}
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
index ff9991cddeaa8c3fd6e44048730b09b6d24efb1f..fd07d87adaa9111148173fc4ffdbff3b212ddebd 100644
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -150,7 +150,7 @@ int __init ltq_stp_init(void)
int ret = platform_driver_register(<q_stp_driver);
if (ret)
- pr_info("ltq_stp: error registering platfom driver");
+ pr_info("ltq_stp: error registering platform driver");
return ret;
}
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index ed3b3d31735815ac1933a289a2673e1b573977ac..cdb1417fba594feb5f9455c06f6b9123a8734dad 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -29,7 +29,7 @@ static void __init sni_pcimt_sc_init(void)
scsiz = cacheconf & 7;
if (scsiz == 0) {
- printk("Second level cache is deactived.\n");
+ printk("Second level cache is deactivated.\n");
return;
}
if (scsiz >= 6) {
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 7589051e79e07c53197c29d3504bdc241fdc43ad..297bd38f7c5d4e9d532ed92a12f4d5f3022b0c59 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -142,7 +142,7 @@ config DEBUG_STACKOVERFLOW
bool "Check for kernel stack overflow"
default y
help
- Make extra checks for space avaliable on stack in some
+ Make extra checks for space available on stack in some
critical functions. This will cause kernel to run a bit slower,
but will catch most of kernel stack overruns and exit gracefuly.
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 425db18580a22fbea55da9142561efb81c2def76..9c80fc07384a386e473474a0a3353a06109e642f 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -258,7 +258,7 @@ config PPC_ICSWX_PID
default y
---help---
The PID register in server is used explicitly for ICSWX. In
- embedded systems PID managment is done by the system.
+ embedded systems PID management is done by the system.
config PPC_ICSWX_USE_SIGILL
bool "Should a bad CT cause a SIGILL?"
@@ -266,7 +266,7 @@ config PPC_ICSWX_USE_SIGILL
default n
---help---
Should a bad CT used for "non-record form ICSWX" cause an
- illegal intruction signal or should it be silent as
+ illegal instruction signal or should it be silent as
architected.
If in doubt, say N here.
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 178a5f300bc973afeb8c4a21799992cbfbdc74e1..837cf49357edf3b25e3b97932d6d1cb261921c7a 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -67,7 +67,7 @@ config IO_EVENT_IRQ
This option will only enable the IO event platform code. You
will still need to enable or compile the actual drivers
- that use this infrastruture to handle IO event interrupts.
+ that use this infrastructure to handle IO event interrupts.
Say Y if you are unsure.
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index ddf096c7d8bf8e230abc484977956ade22c34029..770ff2d5b94dab11f8776e8dd92d35b12d011fc0 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -1,7 +1,7 @@
menu "Processor features"
choice
- prompt "Endianess selection"
+ prompt "Endianness selection"
default CPU_LITTLE_ENDIAN
help
Some SuperH machines can be configured for either little or big
diff --git a/arch/x86/include/asm/atomic64_32.h b/arch/x86/include/asm/atomic64_32.h
index 198119910da55860351ffcc81c0720e62dbc3dd8..b154de75c90cb54f3639bb49b04f6a01b3237fc4 100644
--- a/arch/x86/include/asm/atomic64_32.h
+++ b/arch/x86/include/asm/atomic64_32.h
@@ -63,7 +63,7 @@ ATOMIC64_DECL(add_unless);
/**
* atomic64_cmpxchg - cmpxchg atomic64 variable
- * @p: pointer to type atomic64_t
+ * @v: pointer to type atomic64_t
* @o: expected value
* @n: new value
*
@@ -98,7 +98,7 @@ static inline long long atomic64_xchg(atomic64_t *v, long long n)
/**
* atomic64_set - set atomic64 variable
* @v: pointer to type atomic64_t
- * @n: value to assign
+ * @i: value to assign
*
* Atomically sets the value of @v to @n.
*/
@@ -200,7 +200,7 @@ static inline long long atomic64_sub(long long i, atomic64_t *v)
* atomic64_sub_and_test - subtract value from variable and test result
* @i: integer value to subtract
* @v: pointer to type atomic64_t
- *
+ *
* Atomically subtracts @i from @v and returns
* true if the result is zero, or false for all
* other cases.
@@ -224,9 +224,9 @@ static inline void atomic64_inc(atomic64_t *v)
/**
* atomic64_dec - decrement atomic64 variable
- * @ptr: pointer to type atomic64_t
+ * @v: pointer to type atomic64_t
*
- * Atomically decrements @ptr by 1.
+ * Atomically decrements @v by 1.
*/
static inline void atomic64_dec(atomic64_t *v)
{
diff --git a/arch/x86/kernel/cpu/match.c b/arch/x86/kernel/cpu/match.c
index 5502b289341bdd75971021cbd30c8fd3d9ec78c0..36565373af87b725b1f42a0b10eeaf07af9432d7 100644
--- a/arch/x86/kernel/cpu/match.c
+++ b/arch/x86/kernel/cpu/match.c
@@ -23,7 +23,7 @@
* %X86_MODEL_ANY, %X86_FEATURE_ANY or 0 (except for vendor)
*
* Arrays used to match for this should also be declared using
- * MODULE_DEVICE_TABLE(x86_cpu, ...)
+ * MODULE_DEVICE_TABLE(x86cpu, ...)
*
* This always matches against the boot cpu, assuming models and features are
* consistent over all CPUs.
diff --git a/arch/xtensa/variants/s6000/dmac.c b/arch/xtensa/variants/s6000/dmac.c
index dc7f7c573518b9cb3787b12f783910d6de5d92f2..340f5bb0b5ef4c928c714a280268cd3d0da48d56 100644
--- a/arch/xtensa/variants/s6000/dmac.c
+++ b/arch/xtensa/variants/s6000/dmac.c
@@ -1,5 +1,5 @@
/*
- * Authors: Oskar Schirmer <os@emlix.com>
+ * Authors: Oskar Schirmer <oskar@scara.com>
* Daniel Gloeckner <dg@emlix.com>
* (c) 2008 emlix GmbH http://www.emlix.com
*
diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c
index 7af0757e001b066e26164406f6e8b0725e44f13f..b89541ba39abf3f446d68be6b6319219af09c406 100644
--- a/arch/xtensa/variants/s6000/gpio.c
+++ b/arch/xtensa/variants/s6000/gpio.c
@@ -2,8 +2,8 @@
* s6000 gpio driver
*
* Copyright (c) 2009 emlix GmbH
- * Authors: Oskar Schirmer <os@emlix.com>
- * Johannes Weiner <jw@emlix.com>
+ * Authors: Oskar Schirmer <oskar@scara.com>
+ * Johannes Weiner <hannes@cmpxchg.org>
* Daniel Gloeckner <dg@emlix.com>
*/
#include <linux/bitops.h>
diff --git a/arch/xtensa/variants/s6000/include/variant/dmac.h b/arch/xtensa/variants/s6000/include/variant/dmac.h
index e81735b2a206bcf2e0f717bcaf2f25bab6c33eaa..3f88d9fc6897dbe8788cda09305299cf9cca00ee 100644
--- a/arch/xtensa/variants/s6000/include/variant/dmac.h
+++ b/arch/xtensa/variants/s6000/include/variant/dmac.h
@@ -8,7 +8,7 @@
* Copyright (C) 2006 Tensilica Inc.
* Copyright (C) 2008 Emlix GmbH <info@emlix.com>
* Authors: Fabian Godehardt <fg@emlix.com>
- * Oskar Schirmer <os@emlix.com>
+ * Oskar Schirmer <oskar@scara.com>
* Daniel Gloeckner <dg@emlix.com>
*/
diff --git a/arch/xtensa/variants/s6000/irq.c b/arch/xtensa/variants/s6000/irq.c
index 6651e3285fcf4c591086b434751a5cb414f27a98..81a241e790753e9510df234f28caa9003f8321c5 100644
--- a/arch/xtensa/variants/s6000/irq.c
+++ b/arch/xtensa/variants/s6000/irq.c
@@ -2,8 +2,8 @@
* s6000 irq crossbar
*
* Copyright (c) 2009 emlix GmbH
- * Authors: Johannes Weiner <jw@emlix.com>
- * Oskar Schirmer <os@emlix.com>
+ * Authors: Johannes Weiner <hannes@cmpxchg.org>
+ * Oskar Schirmer <oskar@scara.com>
*/
#include <linux/io.h>
#include <asm/irq.h>
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 464fa2147dfb47c9be87bafd6fb17a96858d658d..f6b0a6e2ea501ff295c38953c4aeda870c497859 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -16,7 +16,7 @@ menuconfig PM_DEVFREQ
is attached to a single device and returns a "representative"
clock frequency of the device, which is also attached
to a device by 1-to-1. The device registering devfreq takes the
- responsiblity to "interpret" the representative frequency and
+ responsibility to "interpret" the representative frequency and
to set its every clock accordingly with the "target" callback
given to devfreq.
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index e48ab3108ad80c080cfe8714f8263605bba1221a..5b739411d62f69b026bbd54f16006e8f0b957b42 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -107,13 +107,13 @@ extern int edac_debug_level;
*
* CPU caches (L1 and L2)
* DMA engines
- * Core CPU swithces
+ * Core CPU switches
* Fabric switch units
* PCIe interface controllers
* other EDAC/ECC type devices that can be monitored for
* errors, etc.
*
- * It allows for a 2 level set of hiearchry. For example:
+ * It allows for a 2 level set of hierarchy. For example:
*
* cache could be composed of L1, L2 and L3 levels of cache.
* Each CPU core would have its own L1 cache, while sharing
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 4b154593343a16977b00ca2e73f0577b9cd74462..45b8f4bdd773ca324c0e5f04f1c3c4a883bd03be 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -56,7 +56,7 @@ static void edac_device_dump_device(struct edac_device_ctl_info *edac_dev)
*
* The control structure is allocated in complete chunk
* from the OS. It is in turn sub allocated to the
- * various objects that compose the struture
+ * various objects that compose the structure
*
* The structure has a 'nr_instance' array within itself.
* Each instance represents a major component
@@ -118,7 +118,7 @@ struct edac_device_ctl_info *edac_device_alloc_ctl_info(
/* Calc the 'end' offset past the attributes array */
pvt = edac_align_ptr(&dev_attrib[count], sz_private);
} else {
- /* no attribute array specificed */
+ /* no attribute array specified */
pvt = edac_align_ptr(dev_attrib, sz_private);
}
@@ -394,7 +394,7 @@ static void edac_device_workq_function(struct work_struct *work_req)
/* Reschedule the workq for the next time period to start again
* if the number of msec is for 1 sec, then adjust to the next
- * whole one second to save timers fireing all over the period
+ * whole one second to save timers firing all over the period
* between integral seconds
*/
if (edac_dev->poll_msec == 1000)
@@ -563,7 +563,7 @@ EXPORT_SYMBOL_GPL(edac_device_add_device);
* Remove sysfs entries for specified edac_device structure and
* then remove edac_device structure from global list
*
- * @pdev:
+ * @dev:
* Pointer to 'struct device' representing edac_device
* structure to remove.
*
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index 85226ccf52907f485e4663c63caffa9c65b80c4e..7f1dfcc4e597f8e75971a6785b95ab73d56cefed 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -90,7 +90,7 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
#define MC_MAX_DOD 0x64
/*
- * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet:
+ * OFFSETS for Device 3 Function 4, as indicated on Xeon 5500 datasheet:
* http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
*/
@@ -101,7 +101,7 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
#define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff)
#define DIMM0_COR_ERR(r) ((r) & 0x7fff)
-/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+/* OFFSETS for Device 3 Function 2, as indicated on Xeon 5500 datasheet */
#define MC_SSRCONTROL 0x48
#define SSR_MODE_DISABLE 0x00
#define SSR_MODE_ENABLE 0x01
@@ -398,7 +398,7 @@ static DEFINE_PCI_DEVICE_TABLE(i7core_pci_tbl) = {
};
/****************************************************************************
- Anciliary status routines
+ Ancillary status routines
****************************************************************************/
/* MC_CONTROL bits */
@@ -1361,7 +1361,7 @@ static int i7core_get_onedevice(struct pci_dev **prev,
dev_descr->dev_id, *prev);
/*
- * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+ * On Xeon 55xx, the Intel QuickPath Arch Generic Non-core regs
* is at addr 8086:2c40, instead of 8086:2c41. So, we need
* to probe for the alternate address in case of failure
*/
@@ -2132,7 +2132,7 @@ static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
/*
* get_sdram_scrub_rate This routine convert current scrub rate value
- * into byte/sec bandwidth accourding to
+ * into byte/sec bandwidth according to
* SCRUBINTERVAL formula found in datasheet.
*/
static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index a203536d90dd613992b859c6889784b7153e46d5..123204f8e23b947a9f7035403f6961f9d988ec22 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -58,7 +58,7 @@ static int probed;
/*
* FIXME: For now, let's order by device function, as it makes
- * easier for driver's development proccess. This table should be
+ * easier for driver's development process. This table should be
* moved to pci_id.h when submitted upstream
*/
#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0 0x3cf4 /* 12.6 */
@@ -375,7 +375,7 @@ static DEFINE_PCI_DEVICE_TABLE(sbridge_pci_tbl) = {
/****************************************************************************
- Anciliary status routines
+ Ancillary status routines
****************************************************************************/
static inline int numrank(u32 mtr)
@@ -1430,7 +1430,7 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
type = "FATAL";
/*
- * According with Table 15-9 of the Intel Archictecture spec vol 3A,
+ * According with Table 15-9 of the Intel Architecture spec vol 3A,
* memory errors should fit in this mask:
* 000f 0000 1mmm cccc (binary)
* where:
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 0ebb7d4796faf4bd105af073b5b2d6bfd4f56ab1..ef67e181377b8ad33647ba38e5e748b2cec71e52 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -1827,14 +1827,10 @@ void radeon_do_release(struct drm_device * dev)
r600_do_cleanup_cp(dev);
else
radeon_do_cleanup_cp(dev);
- if (dev_priv->me_fw) {
- release_firmware(dev_priv->me_fw);
- dev_priv->me_fw = NULL;
- }
- if (dev_priv->pfp_fw) {
- release_firmware(dev_priv->pfp_fw);
- dev_priv->pfp_fw = NULL;
- }
+ release_firmware(dev_priv->me_fw);
+ dev_priv->me_fw = NULL;
+ release_firmware(dev_priv->pfp_fw);
+ dev_priv->pfp_fw = NULL;
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index c58a036233fb4409b3b4b656a1aba1c103b1b40a..456a77cf4b7f6bb4e8a2415ca7a22ff14d296c90 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -551,7 +551,7 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev,
/* nothing to do if vm isn't bound */
if (vm->id == -1)
- return 0;;
+ return 0;
bo_va = radeon_bo_va(bo, vm);
if (bo_va == NULL) {
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index c7008b5210f74d43481017c6d544ae77f78f83cf..0519b05968b5aee7d92fda49da7df228daaaf162 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -91,7 +91,7 @@ int radeon_gem_set_domain(struct drm_gem_object *gobj,
}
if (!domain) {
/* Do nothings */
- printk(KERN_WARNING "Set domain withou domain !\n");
+ printk(KERN_WARNING "Set domain without domain !\n");
return 0;
}
if (domain == RADEON_GEM_DOMAIN_CPU) {
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e9c68fedfcff0b90222cf6a48886fe5229f53d94..034c80a10f1fd547ed2757503d63f74965105118 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -470,7 +470,7 @@ config HID_PICOLCD_FB
select FB_SYS_FOPS
---help---
Provide access to PicoLCD's 256x64 monochrome display via a
- frambuffer device.
+ framebuffer device.
config HID_PICOLCD_BACKLIGHT
bool "Backlight control" if EXPERT
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 8deedc1b98405f8622cca6bff7d826b7114f00fc..e466ecba8dc1f7707e022f56973a1fc2d3754289 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -318,7 +318,7 @@ config SENSORS_EXYNOS4_TMU
tristate "Temperature sensor on Samsung EXYNOS4"
depends on ARCH_EXYNOS4
help
- If you say yes here you get support for TMU (Thermal Managment
+ If you say yes here you get support for TMU (Thermal Management
Unit) on SAMSUNG EXYNOS4 series of SoC.
This driver can also be built as a module. If so, the module
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d2c5095deeaca5dc0324b3786ff056ec09447275..94468a64ce3ac5c56ddf0a04bc8441ca2d9df0a3 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -351,7 +351,7 @@ config I2C_DAVINCI
For details please see http://www.ti.com/davinci
config I2C_DESIGNWARE_PLATFORM
- tristate "Synopsys DesignWare Platfrom"
+ tristate "Synopsys DesignWare Platform"
depends on HAVE_CLK
help
If you say yes to this option, support will be included for the
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
index c64ba736f4802f9e093673c4a832156bc309ebfd..b76a29d1f8e417c49a1ca1089b4c7a9333f0040d 100644
--- a/drivers/i2c/busses/i2c-s6000.c
+++ b/drivers/i2c/busses/i2c-s6000.c
@@ -3,7 +3,7 @@
*
* Description: Driver for S6000 Family I2C Interface
* Copyright (c) 2008 emlix GmbH
- * Author: Oskar Schirmer <os@emlix.com>
+ * Author: Oskar Schirmer <oskar@scara.com>
*
* Partially based on i2c-bfin-twi.c driver by <sonic.zhang@analog.com>
* Copyright (c) 2005-2007 Analog Devices, Inc.
diff --git a/drivers/i2c/busses/i2c-s6000.h b/drivers/i2c/busses/i2c-s6000.h
index ff23b81ded44591ceb93cd861701bd2a632cc0ce..4936f9f2256f947a072a2aabf45d2ab86f2078c7 100644
--- a/drivers/i2c/busses/i2c-s6000.h
+++ b/drivers/i2c/busses/i2c-s6000.h
@@ -6,7 +6,7 @@
* for more details.
*
* Copyright (C) 2008 Emlix GmbH <info@emlix.com>
- * Author: Oskar Schirmer <os@emlix.com>
+ * Author: Oskar Schirmer <oskar@scara.com>
*/
#ifndef __DRIVERS_I2C_BUSSES_I2C_S6000_H
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 3bd9fff5c589301113e5e0501662b211b42e2088..c69843742bb041e911a116e0f96558c20de2bb63 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -43,7 +43,7 @@ config AMD_IOMMU
With this option you can enable support for AMD IOMMU hardware in
your system. An IOMMU is a hardware component which provides
remapping of DMA memory accesses from devices. With an AMD IOMMU you
- can isolate the the DMA memory of different devices and protect the
+ can isolate the DMA memory of different devices and protect the
system from misbehaving device drivers or hardware.
You can find out if your system has an AMD IOMMU if you look into
@@ -67,7 +67,7 @@ config AMD_IOMMU_V2
---help---
This option enables support for the AMD IOMMUv2 features of the IOMMU
hardware. Select this option if you want to use devices that support
- the the PCI PRI and PASID interface.
+ the PCI PRI and PASID interface.
# Intel IOMMU support
config DMAR_TABLE
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 49ef8b0794aed4cd9d796a332e3d24a2adaef200..220686159c1586f7c70d8b70dd1fa86c25c536e9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -417,7 +417,7 @@ config MFD_MAX8925
select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8925. This is
- a Power Management IC. This driver provies common support for
+ a Power Management IC. This driver provides common support for
accessing the device, additional drivers must be enabled in order
to use the functionality of the device.
@@ -440,7 +440,7 @@ config MFD_MAX8998
help
Say yes here to support for Maxim Semiconductor MAX8998 and
National Semiconductor LP3974. This is a Power Management IC.
- This driver provies common support for accessing the device,
+ This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device.
@@ -451,7 +451,7 @@ config MFD_S5M_CORE
select REGMAP_I2C
help
Support for the Samsung Electronics S5M MFD series.
- This driver provies common support for accessing the device,
+ This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device
diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c
index e7ff783aa31ec2a214d691cde38902105bebfa49..5a62e6bf89ae97d115c29a2f61b2395a034722e6 100644
--- a/drivers/mfd/tps65911-comparator.c
+++ b/drivers/mfd/tps65911-comparator.c
@@ -26,7 +26,7 @@
#define COMP1 1
#define COMP2 2
-/* Comparator 1 voltage selection table in milivolts */
+/* Comparator 1 voltage selection table in millivolts */
static const u16 COMP_VSEL_TABLE[] = {
0, 2500, 2500, 2500, 2500, 2550, 2600, 2650,
2700, 2750, 2800, 2850, 2900, 2950, 3000, 3050,
diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig
index e46af9a5810d5363f76976ae14bf1ed6b28ef1d8..33ee834e1b83e4e581f7e40822f9957a3310d99c 100644
--- a/drivers/misc/c2port/Kconfig
+++ b/drivers/misc/c2port/Kconfig
@@ -5,7 +5,7 @@
menuconfig C2PORT
tristate "Silicon Labs C2 port support (EXPERIMENTAL)"
depends on EXPERIMENTAL
- default no
+ default n
help
This option enables support for Silicon Labs C2 port used to
program Silicon micro controller chips (and other 8051 compatible).
@@ -23,8 +23,8 @@ if C2PORT
config C2PORT_DURAMAR_2150
tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)"
- depends on X86 && C2PORT
- default no
+ depends on X86
+ default n
help
This option enables C2 support for the Eurotech's Duramar 2150
on board micro controller.
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 8272c02668d6ebccf54ad75b71da07158fd617be..50aa90aa7a7fce0706a8ef5af2aa683e84fb346b 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -383,7 +383,7 @@ static void doc_set_device_id(struct docg3 *docg3, int id)
* leveling counters are stored. To access this last area of 4 bytes, a special
* mode must be input to the flash ASIC.
*
- * Returns 0 if no error occured, -EIO else.
+ * Returns 0 if no error occurred, -EIO else.
*/
static int doc_set_extra_page_mode(struct docg3 *docg3)
{
@@ -681,7 +681,7 @@ static int doc_ecc_bch_fix_data(struct docg3 *docg3, void *buf, u8 *hwecc)
* - one read of 512 bytes at offset 0
* - one read of 512 bytes at offset 512 + 16
*
- * Returns 0 if successful, -EIO if a read error occured.
+ * Returns 0 if successful, -EIO if a read error occurred.
*/
static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1,
int page, int offset)
@@ -839,7 +839,7 @@ static void calc_block_sector(loff_t from, int *block0, int *block1, int *page,
*
* Reads flash memory OOB area of pages.
*
- * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred
*/
static int doc_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
@@ -971,7 +971,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
* Reads flash memory pages. This function does not read the OOB chunk, but only
* the page data.
*
- * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred
*/
static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
@@ -1109,7 +1109,7 @@ static int doc_get_op_status(struct docg3 *docg3)
* Wait for the chip to be ready again after erase or write operation, and check
* erase/write status.
*
- * Returns 0 if erase successfull, -EIO if erase/write issue, -ETIMEOUT if
+ * Returns 0 if erase successful, -EIO if erase/write issue, -ETIMEOUT if
* timeout
*/
static int doc_write_erase_wait_status(struct docg3 *docg3)
@@ -1186,7 +1186,7 @@ static int doc_erase_block(struct docg3 *docg3, int block0, int block1)
* Erase a bunch of contiguous blocks, by pairs, as a "mtd" page of 1024 is
* split into 2 pages of 512 bytes on 2 contiguous blocks.
*
- * Returns 0 if erase successful, -EINVAL if adressing error, -EIO if erase
+ * Returns 0 if erase successful, -EINVAL if addressing error, -EIO if erase
* issue
*/
static int doc_erase(struct mtd_info *mtd, struct erase_info *info)
@@ -1397,7 +1397,7 @@ static int doc_backup_oob(struct docg3 *docg3, loff_t to,
* Or provide data without OOB, and then a all zeroed OOB will be used (ECC will
* still be filled in if asked for).
*
- * Returns 0 is successfull, EINVAL if length is not 14 bytes
+ * Returns 0 is successful, EINVAL if length is not 14 bytes
*/
static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
struct mtd_oob_ops *ops)
@@ -1945,7 +1945,7 @@ static void doc_release_device(struct mtd_info *mtd)
* docg3_resume - Awakens docg3 floor
* @pdev: platfrom device
*
- * Returns 0 (always successfull)
+ * Returns 0 (always successful)
*/
static int docg3_resume(struct platform_device *pdev)
{
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index b60d6c5f29a0ef90e0a0e312ad231a9aaa23f992..03df9a8f2bbf0c9a444c045a979937c501e38c4a 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -75,7 +75,7 @@ config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on PCI
---help---
- This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+ This driver is for the PCIcanx and PCIcan cards (1, 2 or
4 channel) from Kvaser (http://www.kvaser.com).
config CAN_PLX_PCI
diff --git a/drivers/net/ethernet/3com/typhoon.c b/drivers/net/ethernet/3com/typhoon.c
index 1234a14b2b73b0bc2a0e478c6910c0b45dcfab07..b153666351474ea3a527f6deb97b750c490f39e6 100644
--- a/drivers/net/ethernet/3com/typhoon.c
+++ b/drivers/net/ethernet/3com/typhoon.c
@@ -2549,8 +2549,7 @@ typhoon_init(void)
static void __exit
typhoon_cleanup(void)
{
- if (typhoon_fw)
- release_firmware(typhoon_fw);
+ release_firmware(typhoon_fw);
pci_unregister_driver(&typhoon_driver);
}
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index d55df329017493db4c3646126a401dbe633f3bc8..edeeb516807a1399ceb8f8a9846bbd105fcce7c3 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -15883,8 +15883,7 @@ static void __devexit tg3_remove_one(struct pci_dev *pdev)
if (dev) {
struct tg3 *tp = netdev_priv(dev);
- if (tp->fw)
- release_firmware(tp->fw);
+ release_firmware(tp->fw);
tg3_reset_task_cancel(tp);
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index 25c4e7f2a099f18eb4e27cc2b9a2ee34578281ee..67cd2ed0306a850dbdeda547aa5f07138b5ea235 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -3520,9 +3520,7 @@ static void __exit
bnad_module_exit(void)
{
pci_unregister_driver(&bnad_pci_driver);
-
- if (bfi_fw)
- release_firmware(bfi_fw);
+ release_firmware(bfi_fw);
}
module_init(bnad_module_init);
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
index 0d725dc91bcb701a1a91a30405f1425f5f42eef2..8694124ef77d256f73f52e9d01747c52776eb8f0 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
@@ -1260,8 +1260,7 @@ void netxen_request_firmware(struct netxen_adapter *adapter)
void
netxen_release_firmware(struct netxen_adapter *adapter)
{
- if (adapter->fw)
- release_firmware(adapter->fw);
+ release_firmware(adapter->fw);
adapter->fw = NULL;
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
index d32cf0ddf1b9f37dd098690f59b5888cd569e5ec..799fd40ed03ad3643cc7d28ed927c10e3bc80c7e 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
@@ -1321,8 +1321,7 @@ void qlcnic_request_firmware(struct qlcnic_adapter *adapter)
void
qlcnic_release_firmware(struct qlcnic_adapter *adapter)
{
- if (adapter->fw)
- release_firmware(adapter->fw);
+ release_firmware(adapter->fw);
adapter->fw = NULL;
}
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 4f74b9762c296b81313660b571ff9774a8535ea1..00b4f56a671cac02790a2519b3f978b4c891457d 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -6051,7 +6051,7 @@ static int rtl_open(struct net_device *dev)
pm_runtime_get_sync(&pdev->dev);
/*
- * Rx and Tx desscriptors needs 256 bytes alignment.
+ * Rx and Tx descriptors needs 256 bytes alignment.
* dma_alloc_coherent provides more.
*/
tp->TxDescArray = dma_alloc_coherent(&pdev->dev, R8169_TX_RING_BYTES,
diff --git a/drivers/net/ethernet/s6gmac.c b/drivers/net/ethernet/s6gmac.c
index 8e9fda0c7aeb0cb6a2eb5cacdfc8d0ed62d0d6a4..2ed3ab4b3c2d61648633596662cf47489172d289 100644
--- a/drivers/net/ethernet/s6gmac.c
+++ b/drivers/net/ethernet/s6gmac.c
@@ -1,7 +1,7 @@
/*
* Ethernet driver for S6105 on chip network device
* (c)2008 emlix GmbH http://www.emlix.com
- * Authors: Oskar Schirmer <os@emlix.com>
+ * Authors: Oskar Schirmer <oskar@scara.com>
* Daniel Gloeckner <dg@emlix.com>
*
* This program is free software; you can redistribute it and/or
@@ -1070,4 +1070,4 @@ module_exit(s6gmac_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("S6105 on chip Ethernet driver");
-MODULE_AUTHOR("Oskar Schirmer <os@emlix.com>");
+MODULE_AUTHOR("Oskar Schirmer <oskar@scara.com>");
diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c
index 8846516678c3066a308f7300d9937440024dd082..447a6932cab30b70e21ec3a88a8700a913b9c857 100644
--- a/drivers/net/ethernet/tehuti/tehuti.c
+++ b/drivers/net/ethernet/tehuti/tehuti.c
@@ -341,8 +341,8 @@ static int bdx_fw_load(struct bdx_priv *priv)
out:
if (master)
WRITE_REG(priv, regINIT_SEMAPHORE, 1);
- if (fw)
- release_firmware(fw);
+
+ release_firmware(fw);
if (rc) {
netdev_err(priv->ndev, "firmware loading failed\n");
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 031d8e8ed1ad1e9fbfbdeb0e3aefdd3600146026..595205406d7386188d86fbe5ce943a7128ea9d3b 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -316,7 +316,7 @@ config AU1000_FIR
tristate "Alchemy IrDA SIR/FIR"
depends on IRDA && MIPS_ALCHEMY
help
- Say Y/M here to build suppor the the IrDA peripheral on the
+ Say Y/M here to build support the IrDA peripheral on the
Alchemy Au1000 and Au1100 SoCs.
Say M to build a module; it will be called au1k_ir.ko
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index e3b76d409dee7bc99b7f80af845e8b52ae5a18d5..5003458980d33403913d88948169809d27b30a04 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -348,7 +348,7 @@ int superio_fixup_irq(struct pci_dev *pcidev)
BUG();
return -1;
}
- printk("superio_fixup_irq(%s) ven 0x%x dev 0x%x from %p\n",
+ printk("superio_fixup_irq(%s) ven 0x%x dev 0x%x from %pf\n",
pci_name(pcidev),
pcidev->vendor, pcidev->device,
__builtin_return_address(0));
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 6b26666b37f21d63665d20724fdba709f5523973..c4c1a5444b38e3486d0617f0a843e3cc8f9cfd9c 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -1,7 +1,7 @@
/*-*-linux-c-*-*/
/*
- Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
+ Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@just42.net>
Copyright (C) 2008 Peter Gruber <nokos@gmx.net>
Copyright (C) 2008 Tony Vroon <tony@linx.net>
Based on earlier work:
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 222ccd872ac55119fb6af650af20cd3c48d42ad6..f5d6d379f2fb2f4c95ade1f73c4b4678900ee575 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -451,7 +451,7 @@ static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di,
}
/*
- * Return the battery Voltage in milivolts
+ * Return the battery Voltage in millivolts
* Or < 0 if something fails.
*/
static int bq27x00_battery_voltage(struct bq27x00_device_info *di,
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 5648dad71fb39355041a65bbc6e920600bbb94ba..ffdf712f9a67c7e725b790ff3fed54fc43985901 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -70,7 +70,7 @@ config DP83640_PHY
using the SO_TIMESTAMPING API.
In order for this to work, your MAC driver must also
- implement the skb_tx_timetamp() function.
+ implement the skb_tx_timestamp() function.
config PTP_1588_CLOCK_PCH
tristate "Intel PCH EG20T as PTP clock"
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 8dc3d9392bfa36eca25acc5859c13355713492ad..4e01a423471b7d521921a5cf65a99afa1cd7fdc5 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -31,54 +31,54 @@
TPS65910_SLEEP_CONTROL_EXT_INPUT_EN3 | \
TPS65911_SLEEP_CONTROL_EXT_INPUT_SLEEP)
-/* supported VIO voltages in milivolts */
+/* supported VIO voltages in millivolts */
static const u16 VIO_VSEL_table[] = {
1500, 1800, 2500, 3300,
};
/* VSEL tables for TPS65910 specific LDOs and dcdc's */
-/* supported VDD3 voltages in milivolts */
+/* supported VDD3 voltages in millivolts */
static const u16 VDD3_VSEL_table[] = {
5000,
};
-/* supported VDIG1 voltages in milivolts */
+/* supported VDIG1 voltages in millivolts */
static const u16 VDIG1_VSEL_table[] = {
1200, 1500, 1800, 2700,
};
-/* supported VDIG2 voltages in milivolts */
+/* supported VDIG2 voltages in millivolts */
static const u16 VDIG2_VSEL_table[] = {
1000, 1100, 1200, 1800,
};
-/* supported VPLL voltages in milivolts */
+/* supported VPLL voltages in millivolts */
static const u16 VPLL_VSEL_table[] = {
1000, 1100, 1800, 2500,
};
-/* supported VDAC voltages in milivolts */
+/* supported VDAC voltages in millivolts */
static const u16 VDAC_VSEL_table[] = {
1800, 2600, 2800, 2850,
};
-/* supported VAUX1 voltages in milivolts */
+/* supported VAUX1 voltages in millivolts */
static const u16 VAUX1_VSEL_table[] = {
1800, 2500, 2800, 2850,
};
-/* supported VAUX2 voltages in milivolts */
+/* supported VAUX2 voltages in millivolts */
static const u16 VAUX2_VSEL_table[] = {
1800, 2800, 2900, 3300,
};
-/* supported VAUX33 voltages in milivolts */
+/* supported VAUX33 voltages in millivolts */
static const u16 VAUX33_VSEL_table[] = {
1800, 2000, 2800, 3300,
};
-/* supported VMMC voltages in milivolts */
+/* supported VMMC voltages in millivolts */
static const u16 VMMC_VSEL_table[] = {
1800, 2800, 3000, 3300,
};
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index e756a0df3664e0dd60ee8129449840347b5bdf42..d6f8adaa26efb1fd0916253f2daf3f420e4ff486 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1105,8 +1105,7 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context)
goto out;
out:
- if (fw)
- release_firmware(fw);
+ release_firmware(fw);
/* allow rproc_unregister() contexts, if any, to proceed */
complete_all(&rproc->firmware_loading_complete);
}
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index 390168f62a13f5dc79316818a4322306ebdc63a5..5fdca93892ad4e2fda61c85eaefa4ebf36aaec76 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -1228,8 +1228,7 @@ static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq)
int asd_release_firmware(void)
{
- if (sequencer_fw)
- release_firmware(sequencer_fw);
+ release_firmware(sequencer_fw);
return 0;
}
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 394ed9e79fd489bf355879e0a6dc76bfca59b562..34552bf1c023d6468af7aea32afcc70ab0f88953 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1000,7 +1000,7 @@ static int esp_check_spur_intr(struct esp *esp)
static void esp_schedule_reset(struct esp *esp)
{
- esp_log_reset("ESP: esp_schedule_reset() from %p\n",
+ esp_log_reset("ESP: esp_schedule_reset() from %pf\n",
__builtin_return_address(0));
esp->flags |= ESP_FLAG_RESETTING;
esp_event(esp, ESP_EVENT_RESET);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 6c6486f626ee6e823725faa5cc21a7452a3ccad7..538230be5cca1be39898aa37bffb1d220f1ddb41 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -4473,17 +4473,14 @@ qla1280_exit(void)
pci_unregister_driver(&qla1280_pci_driver);
/* release any allocated firmware images */
for (i = 0; i < QL_NUM_FW_IMAGES; i++) {
- if (qla1280_fw_tbl[i].fw) {
- release_firmware(qla1280_fw_tbl[i].fw);
- qla1280_fw_tbl[i].fw = NULL;
- }
+ release_firmware(qla1280_fw_tbl[i].fw);
+ qla1280_fw_tbl[i].fw = NULL;
}
}
module_init(qla1280_init);
module_exit(qla1280_exit);
-
MODULE_AUTHOR("Qlogic & Jes Sorensen");
MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7db803377c6418205255c4aefc5fe1653b4ae6cd..c9c56a8427f3e1d36c2a1c14764a4d4860a782d9 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -4122,8 +4122,7 @@ qla2x00_release_firmware(void)
mutex_lock(&qla_fw_lock);
for (idx = 0; idx < FW_BLOBS; idx++)
- if (qla_fw_blobs[idx].fw)
- release_firmware(qla_fw_blobs[idx].fw);
+ release_firmware(qla_fw_blobs[idx].fw);
mutex_unlock(&qla_fw_lock);
}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 386f0c53bea7e17cf2b74fe29af5d1d7176c25b9..d0f71e5d065f901c3070e7d07f6c03aa42baceaa 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -664,7 +664,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
}
/**
- * scsi_eh_prep_cmnd - Save a scsi command info as part of error recory
+ * scsi_eh_prep_cmnd - Save a scsi command info as part of error recovery
* @scmd: SCSI command structure to hijack
* @ses: structure to save restore information
* @cmnd: CDB to send. Can be NULL if no new cmnd is needed
@@ -739,7 +739,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
EXPORT_SYMBOL(scsi_eh_prep_cmnd);
/**
- * scsi_eh_restore_cmnd - Restore a scsi command info as part of error recory
+ * scsi_eh_restore_cmnd - Restore a scsi command info as part of error recovery
* @scmd: SCSI command structure to restore
* @ses: saved information from a coresponding call to scsi_eh_prep_cmnd
*
@@ -762,7 +762,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
EXPORT_SYMBOL(scsi_eh_restore_cmnd);
/**
- * scsi_send_eh_cmnd - submit a scsi command as part of error recory
+ * scsi_send_eh_cmnd - submit a scsi command as part of error recovery
* @scmd: SCSI command structure to hijack
* @cmnd: CDB to send
* @cmnd_size: size in bytes of @cmnd
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 15a42c8c1943e54a40f4b960b632b961889d8ce0..5b3f5fffea92d241b50587b885c24bf69f83e878 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -914,7 +914,7 @@ static int gs_put_char(struct tty_struct *tty, unsigned char ch)
unsigned long flags;
int status;
- pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %p\n",
+ pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n",
port->port_num, tty, ch, __builtin_return_address(0));
spin_lock_irqsave(&port->port_lock, flags);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 74a14f6ed34c6ac4d66265f6f19e6832f096413d..83e58df29fe3ad32b1a7fc3c27cecc84f4e0a472 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -153,7 +153,7 @@ config USB_EHCI_HCD_OMAP
bool "EHCI support for OMAP3 and later chips"
depends on USB_EHCI_HCD && ARCH_OMAP
default y
- --- help ---
+ ---help---
Enables support for the on-chip EHCI controller on
OMAP3 and later chips.
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 8f3cbb8dc81b0d04f61fc85804eb64b43af5fe87..1719886bb9bed3d7f9971d45f2da30e62978c3c1 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -110,7 +110,7 @@ UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
+/* Deduced by Jonathan Woithe <jwoithe@just42.net>
* Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
* always fails and confuses drive.
*/
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index ffbce4525468955a06051bb2df31caf83c522606..fe3b6ec87122eefb6f2b8d1d36ed3303a6d754e3 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -536,7 +536,7 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
for (page = (unsigned long)fbdev->fb_mem;
page < PAGE_ALIGN((unsigned long)fbdev->fb_mem + fbdev->fb_len);
page += PAGE_SIZE) {
-#if CONFIG_DMA_NONCOHERENT
+#ifdef CONFIG_DMA_NONCOHERENT
SetPageReserved(virt_to_page(CAC_ADDR((void *)page)));
#else
SetPageReserved(virt_to_page(page));
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index fd2c7bd9dfbeea439c142ec1477b7e2ff2811f2b..6743bde038cc656972d42b2e7078026056b3dc27 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -16,7 +16,7 @@ config W1_CON
depends on CONNECTOR
bool "Userspace communication over connector"
default y
- --- help ---
+ ---help---
This allows to communicate with userspace using connector. For more
information see <file:Documentation/connector/connector.txt>.
There are three types of messages between w1 core and userspace:
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 37096246c93716ef314ad9fc4f519124cbc7456f..eeea76f4dccb273728706b8c4db7bbba9bdab244 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -937,7 +937,7 @@ config BCM47XX_WDT
tristate "Broadcom BCM47xx Watchdog Timer"
depends on BCM47XX
help
- Hardware driver for the Broadcom BCM47xx Watchog Timer.
+ Hardware driver for the Broadcom BCM47xx Watchdog Timer.
config RC32434_WDT
tristate "IDT RC32434 SoC Watchdog Timer"
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index ea20c51d24c76420c5c586fc4e9203478094ecda..8d2501e604dde22dd2bf1103454c4a1824f93793 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -71,7 +71,7 @@ config XEN_DEV_EVTCHN
tristate "Xen /dev/xen/evtchn device"
default y
help
- The evtchn driver allows a userspace process to triger event
+ The evtchn driver allows a userspace process to trigger event
channels and to receive notification of an event channel
firing.
If in doubt, say yes.
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index a7ffc88a7dbe4bcc028d3397970275dffcf0492e..e1fe74a2ce16e6a4e0b38129160f484e642c42fa 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2753,7 +2753,7 @@ static int write_dev_flush(struct btrfs_device *device, int wait)
* one reference for us, and we leave it for the
* caller
*/
- device->flush_bio = NULL;;
+ device->flush_bio = NULL;
bio = bio_alloc(GFP_NOFS, 0);
if (!bio)
return -ENOMEM;
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
index 1d7a3f7b3b5dbe2022929abd78b5dbe7dda75a86..dcc9631b305227140a2f0116ed4a065655c23237 100644
--- a/include/linux/mfd/wm831x/pdata.h
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -26,7 +26,7 @@ struct wm831x_backlight_pdata {
struct wm831x_backup_pdata {
int charger_enable;
int no_constant_voltage; /** Disable constant voltage charging */
- int vlim; /** Voltage limit in milivolts */
+ int vlim; /** Voltage limit in millivolts */
int ilim; /** Current limit in microamps */
};
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index dff711509661c8e5eb74fce083eef26e526a783e..41aa49b74821a43ba84ad4a936a2df1ae8055262 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -30,7 +30,7 @@
/*
* PAGE_ALLOC_COSTLY_ORDER is the order at which allocations are deemed
* costly to service. That is between allocation orders which should
- * coelesce naturally under reasonable reclaim pressure and those which
+ * coalesce naturally under reasonable reclaim pressure and those which
* will not.
*/
#define PAGE_ALLOC_COSTLY_ORDER 3
diff --git a/include/linux/rational.h b/include/linux/rational.h
index 4f532fcd9eeaeb41b68211253bbc999dd0b7d749..bfa6a2bcfb32bc9767ece9a60e823d618b75f3c5 100644
--- a/include/linux/rational.h
+++ b/include/linux/rational.h
@@ -1,7 +1,7 @@
/*
* rational fractions
*
- * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <oskar@scara.com>
*
* helper functions when coping with rational numbers,
* e.g. when calculating optimum numerator/denominator pairs for
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index d9b42c5be088655f3ede5a1bfe396018cb3aac6c..4c5b63283377449ff94252f1ff64e2a8b16fddcf 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -426,7 +426,7 @@ struct tcp_sock {
struct sk_buff_head out_of_order_queue; /* Out of order segments go here */
- /* SACKs data, these 2 need to be together (see tcp_build_and_update_options) */
+ /* SACKs data, these 2 need to be together (see tcp_options_write) */
struct tcp_sack_block duplicate_sack[1]; /* D-SACK block */
struct tcp_sack_block selective_acks[4]; /* The SACKS themselves*/
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
index 7d497291c85d8489ff3b11e59ebfefc0b3417a0d..4018f5058f272911480cbf487f401376b6a7cd74 100644
--- a/include/trace/events/workqueue.h
+++ b/include/trace/events/workqueue.h
@@ -103,7 +103,7 @@ TRACE_EVENT(workqueue_execute_start,
);
/**
- * workqueue_execute_end - called immediately before the workqueue callback
+ * workqueue_execute_end - called immediately after the workqueue callback
* @work: pointer to struct work_struct
*
* Allows to track workqueue execution.
diff --git a/kernel/semaphore.c b/kernel/semaphore.c
index 60636a4e25c3d47217100f9a89dcb3ee96452d54..4567fc020fe343970e0cb09c53aed567531be703 100644
--- a/kernel/semaphore.c
+++ b/kernel/semaphore.c
@@ -118,7 +118,7 @@ EXPORT_SYMBOL(down_killable);
* down_trylock - try to acquire the semaphore, without waiting
* @sem: the semaphore to be acquired
*
- * Try to acquire the semaphore atomically. Returns 0 if the mutex has
+ * Try to acquire the semaphore atomically. Returns 0 if the semaphore has
* been acquired successfully or 1 if it it cannot be acquired.
*
* NOTE: This return value is inverted from both spin_trylock and
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index d81a1a532994b7656af8907235c232a71be00cea..f347ac91292d41a52537710e1f150cfc9b767b7e 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -271,7 +271,7 @@ config PROFILE_ANNOTATED_BRANCHES
bool "Trace likely/unlikely profiler"
select TRACE_BRANCH_PROFILING
help
- This tracer profiles all the the likely and unlikely macros
+ This tracer profiles all likely and unlikely macros
in the kernel. It will display the results in:
/sys/kernel/debug/tracing/trace_stat/branch_annotated
diff --git a/lib/rational.c b/lib/rational.c
index d326da3976f5192472dfc07733822bfcdc16218f..f0aa21c2a762415dd07d7bd9c8432d4ebfcbfe48 100644
--- a/lib/rational.c
+++ b/lib/rational.c
@@ -1,7 +1,7 @@
/*
* rational fractions
*
- * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <oskar@scara.com>
*
* helper functions when coping with rational numbers
*/
diff --git a/net/atm/lec.h b/net/atm/lec.h
index c730e57de199c6781e2318695ec013b36c44ff19..a86aff9a3c04a760e42d67b7460e28bdb2c23dfb 100644
--- a/net/atm/lec.h
+++ b/net/atm/lec.h
@@ -55,11 +55,11 @@ struct lane2_ops {
* frames.
*
* 1. Dix Ethernet EtherType frames encoded by placing EtherType
- * field in h_type field. Data follows immediatelly after header.
+ * field in h_type field. Data follows immediately after header.
* 2. LLC Data frames whose total length, including LLC field and data,
* but not padding required to meet the minimum data frame length,
* is less than 1536(0x0600) MUST be encoded by placing that length
- * in the h_type field. The LLC field follows header immediatelly.
+ * in the h_type field. The LLC field follows header immediately.
* 3. LLC data frames longer than this maximum MUST be encoded by placing
* the value 0 in the h_type field.
*
diff --git a/net/caif/Kconfig b/net/caif/Kconfig
index 936361e5a2b66f109156d8ac646f01ee2ed88027..d3694953b1d79410cf02f5e78999813c7d39a09e 100644
--- a/net/caif/Kconfig
+++ b/net/caif/Kconfig
@@ -25,7 +25,7 @@ config CAIF_DEBUG
bool "Enable Debug"
depends on CAIF
default n
- --- help ---
+ ---help---
Enable the inclusion of debug code in the CAIF stack.
Be aware that doing this will impact performance.
If unsure say N.
diff --git a/sound/isa/als100.c b/sound/isa/als100.c
index d1f4351fb6ee31674b895cb1baa1869e1becd2b4..2d67c78c9f4bc16e01bf7d869d2163f8122f5616 100644
--- a/sound/isa/als100.c
+++ b/sound/isa/als100.c
@@ -7,7 +7,7 @@
Thanks to Pierfrancesco 'qM2' Passerini.
Generalised for soundcards based on DT-0196 and ALS-007 chips
- by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>: June 2002.
+ by Jonathan Woithe <jwoithe@just42.net>: June 2002.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7810913d07a032f303815966f4c19c26cc22c5a1..708d47c294eed0f971914f9269cdc6761c0a281c 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6,7 +6,7 @@
* Copyright (c) 2004 Kailang Yang <kailang@realtek.com.tw>
* PeiSen Hou <pshou@realtek.com.tw>
* Takashi Iwai <tiwai@suse.de>
- * Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
+ * Jonathan Woithe <jwoithe@just42.net>
*
* This driver is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index 810acaa0900955f0a24b3b99089356ec413a01e8..d83e5d0b5d52758e17561466d244e28a2938f2c6 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -28,7 +28,7 @@ config SND_SOC_IMX_AUDMUX
tristate
config SND_MXC_SOC_WM1133_EV1
- tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
+ tristate "Audio on the i.MX31ADS with WM1133-EV1 fitted"
depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
select SND_MXC_SOC_FIQ