[C43] dts: clear reference board peripherals

arch/arm64/boot/dts/seco/seco-imx8qm-c43.dts

@@ -524,12 +524,10 @@ &usdhc3 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-
 	brcmf: bcrmf@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
-
 };
 /*  __________________________________________________________________________
  * |__________________________________________________________________________|
@@ -548,8 +546,6 @@ &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c0>;
 	status = "okay";
-
-
 };
 
 &i2c1 {
@@ -589,16 +585,8 @@ &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
-
-};
-&i2c0_mipi0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
-	clock-frequency = <100000>;
-	status = "disabled";
 };
+
 &i2c1_lvds0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -615,99 +603,24 @@ &i2c1_lvds1 {
 	pinctrl-0 = <&pinctrl_lvds1_lpi2c1>;
 	clock-frequency = <100000>;
 	status = "disabled";
-
 };
+
 &i2c_mipi_csi0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
 	clock-frequency = <100000>;
-	status = "okay";
-
-	max9286_mipi@6a {
-		compatible = "maxim,max9286_mipi";
-		reg = <0x6a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mipi_csi0>;
-		clocks = <&clk_dummy>;
-		clock-names = "capture_mclk";
-		mclk = <27000000>;
-		mclk_source = <0>;
-		pwn-gpios = <&lsio_gpio1 27 GPIO_ACTIVE_HIGH>;
-		virtual-channel;
-		status = "okay";
-		port {
-			max9286_0_ep: endpoint {
-				remote-endpoint = <&mipi_csi0_ep>;
-				data-lanes = <1 2 3 4>;
-			};
-		};
-	};
+	status = "disabled";
 };
 
 &i2c_mipi_csi1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c_mipi_csi1>;
 	clock-frequency = <100000>;
-	status = "okay";
-
-	max9286_mipi@6a {
-		compatible = "maxim,max9286_mipi";
-		reg = <0x6a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mipi_csi1>;
-		clocks = <&clk_dummy>;
-		clock-names = "capture_mclk";
-		mclk = <27000000>;
-		mclk_source = <0>;
-		pwn-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_HIGH>;
-		virtual-channel;
-		status = "okay";
-		port {
-			max9286_1_ep: endpoint {
-				remote-endpoint = <&mipi_csi1_ep>;
-				data-lanes = <1 2 3 4>;
-			};
-		};
-	};
-};
-
-&i2c_rpbus_1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	pca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	cs42888: cs42888@48 {
-		compatible = "cirrus,cs42888";
-		reg = <0x48>;
-		clocks = <&mclkout0_lpcg 0>;
-		clock-names = "mclk";
-		VA-supply = <&reg_audio>;
-		VD-supply = <&reg_audio>;
-		VLS-supply = <&reg_audio>;
-		VLC-supply = <&reg_audio>;
-		reset-gpio = <&lsio_gpio4 25 GPIO_ACTIVE_LOW>;
-		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
-				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
-				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
-				<&mclkout0_lpcg 0>;
-		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
-		fsl,txs-rxm;
-		status = "okay";
-	};
+	status = "disabled";
 };
 
-
  /*  __________________________________________________________________________
  * |__________________________________________________________________________|
  */
@@ -1786,32 +1699,13 @@ vpu_enc_core1: core1@1040000 {
 &mipi_csi_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
-	virtual-channel;
-	status = "okay";
-
-	/* Camera 0  MIPI CSI-2 (CSIS0) */
-	port@0 {
-		reg = <0>;
-		mipi_csi0_ep: endpoint {
-			remote-endpoint = <&max9286_0_ep>;
-			data-lanes = <1 2 3 4>;
-		};
-	};
+	status = "disabled";
 };
 
 &mipi_csi_1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "disabled";
-
-	/* Camera 1  MIPI CSI-2 (CSIS1) */
-	port@1 {
-		reg = <1>;
-		mipi_csi1_ep: endpoint {
-			remote-endpoint = <&max9286_1_ep>;
-			data-lanes = <1 2 3 4>;
-		};
-	};
 };
 
 &adc0 {