diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 29a291d3bf24b20372e03a16d0596e5184b152bd..ee57e2bee9a1b709a223e57dc8f26d15f77eb2a7 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -85,26 +85,23 @@ struct vendor_data {
unsigned int (*get_fifosize)(struct amba_device *dev);
};
-/* Max address offset of register in use is 0x48 */
-#define REG_NR (0x48 >> 2)
-#define IDX(x) (x >> 2)
enum reg_idx {
- REG_DR = IDX(UART01x_DR),
- REG_RSR = IDX(UART01x_RSR),
- REG_ST_DMAWM = IDX(ST_UART011_DMAWM),
- REG_FR = IDX(UART01x_FR),
- REG_ST_LCRH_RX = IDX(ST_UART011_LCRH_RX),
- REG_ILPR = IDX(UART01x_ILPR),
- REG_IBRD = IDX(UART011_IBRD),
- REG_FBRD = IDX(UART011_FBRD),
- REG_LCRH = IDX(UART011_LCRH),
- REG_CR = IDX(UART011_CR),
- REG_IFLS = IDX(UART011_IFLS),
- REG_IMSC = IDX(UART011_IMSC),
- REG_RIS = IDX(UART011_RIS),
- REG_MIS = IDX(UART011_MIS),
- REG_ICR = IDX(UART011_ICR),
- REG_DMACR = IDX(UART011_DMACR),
+ REG_DR = UART01x_DR,
+ REG_RSR = UART01x_RSR,
+ REG_ST_DMAWM = ST_UART011_DMAWM,
+ REG_FR = UART01x_FR,
+ REG_ST_LCRH_RX = ST_UART011_LCRH_RX,
+ REG_ILPR = UART01x_ILPR,
+ REG_IBRD = UART011_IBRD,
+ REG_FBRD = UART011_FBRD,
+ REG_LCRH = UART011_LCRH,
+ REG_CR = UART011_CR,
+ REG_IFLS = UART011_IFLS,
+ REG_IMSC = UART011_IMSC,
+ REG_RIS = UART011_RIS,
+ REG_MIS = UART011_MIS,
+ REG_ICR = UART011_ICR,
+ REG_DMACR = UART011_DMACR,
};
static unsigned int get_fifosize_arm(struct amba_device *dev)
@@ -206,24 +203,6 @@ struct uart_amba_port {
#endif
};
-static unsigned int pl011_readw(struct uart_amba_port *uap, int index)
-{
- WARN_ON(index > REG_NR);
- return readw_relaxed(uap->port.membase + (index << 2));
-}
-
-static void pl011_writew(struct uart_amba_port *uap, int val, int index)
-{
- WARN_ON(index > REG_NR);
- writew_relaxed(val, uap->port.membase + (index << 2));
-}
-
-static void pl011_writeb(struct uart_amba_port *uap, u8 val, int index)
-{
- WARN_ON(index > REG_NR);
- writeb_relaxed(val, uap->port.membase + (index << 2));
-}
-
/*
* Reads up to 256 characters from the FIFO or until it's empty and
* inserts them into the TTY layer. Returns the number of characters
@@ -236,12 +215,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
int fifotaken = 0;
while (max_count--) {
- status = pl011_readw(uap, REG_FR);
+ status = readw(uap->port.membase + REG_FR);
if (status & UART01x_FR_RXFE)
break;
/* Take chars from the FIFO and update status */
- ch = pl011_readw(uap, REG_DR) |
+ ch = readw(uap->port.membase + REG_DR) |
UART_DUMMY_DR_RX;
flag = TTY_NORMAL;
uap->port.icount.rx++;
@@ -478,7 +457,7 @@ static void pl011_dma_tx_callback(void *data)
dmacr = uap->dmacr;
uap->dmacr = dmacr & ~UART011_TXDMAE;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
/*
* If TX DMA was disabled, it means that we've stopped the DMA for
@@ -592,7 +571,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
dma_dev->device_issue_pending(chan);
uap->dmacr |= UART011_TXDMAE;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
uap->dmatx.queued = true;
/*
@@ -628,9 +607,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
*/
if (uap->dmatx.queued) {
uap->dmacr |= UART011_TXDMAE;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
uap->im &= ~UART011_TXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
return true;
}
@@ -640,7 +619,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
*/
if (pl011_dma_tx_refill(uap) > 0) {
uap->im &= ~UART011_TXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
return true;
}
return false;
@@ -654,7 +633,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
{
if (uap->dmatx.queued) {
uap->dmacr &= ~UART011_TXDMAE;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
}
}
@@ -680,12 +659,14 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
if (!uap->dmatx.queued) {
if (pl011_dma_tx_refill(uap) > 0) {
uap->im &= ~UART011_TXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase +
+ REG_IMSC);
} else
ret = false;
} else if (!(uap->dmacr & UART011_TXDMAE)) {
uap->dmacr |= UART011_TXDMAE;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr,
+ uap->port.membase + REG_DMACR);
}
return ret;
}
@@ -696,9 +677,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
*/
dmacr = uap->dmacr;
uap->dmacr &= ~UART011_TXDMAE;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
- if (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF) {
+ if (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF) {
/*
* No space in the FIFO, so enable the transmit interrupt
* so we know when there is space. Note that once we've
@@ -707,13 +688,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
return false;
}
- pl011_writew(uap, uap->port.x_char, REG_DR);
+ writew(uap->port.x_char, uap->port.membase + REG_DR);
uap->port.icount.tx++;
uap->port.x_char = 0;
/* Success - restore the DMA state */
uap->dmacr = dmacr;
- pl011_writew(uap, dmacr, REG_DMACR);
+ writew(dmacr, uap->port.membase + REG_DMACR);
return true;
}
@@ -741,7 +722,7 @@ __acquires(&uap->port.lock)
DMA_TO_DEVICE);
uap->dmatx.queued = false;
uap->dmacr &= ~UART011_TXDMAE;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
}
}
@@ -781,11 +762,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
dma_async_issue_pending(rxchan);
uap->dmacr |= UART011_RXDMAE;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
uap->dmarx.running = true;
uap->im &= ~UART011_RXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
return 0;
}
@@ -843,9 +824,8 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
*/
if (dma_count == pending && readfifo) {
/* Clear any error flags */
- pl011_writew(uap,
- UART011_OEIS | UART011_BEIS | UART011_PEIS
- | UART011_FEIS, REG_ICR);
+ writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
+ uap->port.membase + REG_ICR);
/*
* If we read all the DMA'd characters, and we had an
@@ -893,7 +873,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
/* Disable RX DMA - incoming data will wait in the FIFO */
uap->dmacr &= ~UART011_RXDMAE;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
uap->dmarx.running = false;
pending = sgbuf->sg.length - state.residue;
@@ -913,7 +893,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
"fall back to interrupt mode\n");
uap->im |= UART011_RXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
}
}
@@ -961,7 +941,7 @@ static void pl011_dma_rx_callback(void *data)
dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
"fall back to interrupt mode\n");
uap->im |= UART011_RXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
}
}
@@ -974,7 +954,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
{
/* FIXME. Just disable the DMA enable */
uap->dmacr &= ~UART011_RXDMAE;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
}
/*
@@ -1018,7 +998,7 @@ static void pl011_dma_rx_poll(unsigned long args)
spin_lock_irqsave(&uap->port.lock, flags);
pl011_dma_rx_stop(uap);
uap->im |= UART011_RXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
spin_unlock_irqrestore(&uap->port.lock, flags);
uap->dmarx.running = false;
@@ -1080,7 +1060,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
skip_rx:
/* Turn on DMA error (RX/TX will be enabled on demand) */
uap->dmacr |= UART011_DMAONERR;
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
/*
* ST Micro variants has some specific dma burst threshold
@@ -1088,9 +1068,9 @@ skip_rx:
* be issued above/below 16 bytes.
*/
if (uap->vendor->dma_threshold)
- pl011_writew(uap,
- ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
- REG_ST_DMAWM);
+ writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
+ uap->port.membase + REG_ST_DMAWM);
+
if (uap->using_rx_dma) {
if (pl011_dma_rx_trigger_dma(uap))
@@ -1115,12 +1095,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
return;
/* Disable RX and TX DMA */
- while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY)
+ while (readw(uap->port.membase + REG_FR) & UART01x_FR_BUSY)
barrier();
spin_lock_irq(&uap->port.lock);
uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
- pl011_writew(uap, uap->dmacr, REG_DMACR);
+ writew(uap->dmacr, uap->port.membase + REG_DMACR);
spin_unlock_irq(&uap->port.lock);
if (uap->using_tx_dma) {
@@ -1221,7 +1201,7 @@ static void pl011_stop_tx(struct uart_port *port)
container_of(port, struct uart_amba_port, port);
uap->im &= ~UART011_TXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
pl011_dma_tx_stop(uap);
}
@@ -1231,7 +1211,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
static void pl011_start_tx_pio(struct uart_amba_port *uap)
{
uap->im |= UART011_TXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
pl011_tx_chars(uap, false);
}
@@ -1251,7 +1231,7 @@ static void pl011_stop_rx(struct uart_port *port)
uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
UART011_PEIM|UART011_BEIM|UART011_OEIM);
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
pl011_dma_rx_stop(uap);
}
@@ -1262,7 +1242,7 @@ static void pl011_enable_ms(struct uart_port *port)
container_of(port, struct uart_amba_port, port);
uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
}
static void pl011_rx_chars(struct uart_amba_port *uap)
@@ -1282,7 +1262,7 @@ __acquires(&uap->port.lock)
dev_dbg(uap->port.dev, "could not trigger RX DMA job "
"fall back to interrupt mode again\n");
uap->im |= UART011_RXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
} else {
#ifdef CONFIG_DMA_ENGINE
/* Start Rx DMA poll */
@@ -1303,10 +1283,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
bool from_irq)
{
if (unlikely(!from_irq) &&
- pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
+ readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF)
return false; /* unable to transmit character */
- pl011_writew(uap, c, REG_DR);
+ writew(c, uap->port.membase + REG_DR);
uap->port.icount.tx++;
return true;
@@ -1353,7 +1333,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
{
unsigned int status, delta;
- status = pl011_readw(uap, REG_FR) & UART01x_FR_MODEM_ANY;
+ status = readw(uap->port.membase + REG_FR) & UART01x_FR_MODEM_ANY;
delta = status ^ uap->old_status;
uap->old_status = status;
@@ -1381,15 +1361,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
return;
/* workaround to make sure that all bits are unlocked.. */
- pl011_writew(uap, 0x00, REG_ICR);
+ writew(0x00, uap->port.membase + REG_ICR);
/*
* WA: introduce 26ns(1 uart clk) delay before W1C;
* single apb access will incur 2 pclk(133.12Mhz) delay,
* so add 2 dummy reads
*/
- dummy_read = pl011_readw(uap, REG_ICR);
- dummy_read = pl011_readw(uap, REG_ICR);
+ dummy_read = readw(uap->port.membase + REG_ICR);
+ dummy_read = readw(uap->port.membase + REG_ICR);
}
static irqreturn_t pl011_int(int irq, void *dev_id)
@@ -1401,13 +1381,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
int handled = 0;
spin_lock_irqsave(&uap->port.lock, flags);
- imsc = pl011_readw(uap, REG_IMSC);
- status = pl011_readw(uap, REG_RIS) & imsc;
+ imsc = readw(uap->port.membase + REG_IMSC);
+ status = readw(uap->port.membase + REG_RIS) & imsc;
if (status) {
do {
check_apply_cts_event_workaround(uap);
- pl011_writew(uap, status & ~(UART011_TXIS|UART011_RTIS|
- UART011_RXIS), REG_ICR);
+
+ writew(status & ~(UART011_TXIS|UART011_RTIS|
+ UART011_RXIS),
+ uap->port.membase + REG_ICR);
if (status & (UART011_RTIS|UART011_RXIS)) {
if (pl011_dma_rx_running(uap))
@@ -1424,7 +1406,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
if (pass_counter-- == 0)
break;
- status = pl011_readw(uap, REG_RIS) & imsc;
+ status = readw(uap->port.membase + REG_RIS) & imsc;
} while (status != 0);
handled = 1;
}
@@ -1438,7 +1420,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
- unsigned int status = pl011_readw(uap, REG_FR);
+ unsigned int status = readw(uap->port.membase + REG_FR);
return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
@@ -1447,7 +1429,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned int result = 0;
- unsigned int status = pl011_readw(uap, REG_FR);
+ unsigned int status = readw(uap->port.membase + REG_FR);
#define TIOCMBIT(uartbit, tiocmbit) \
if (status & uartbit) \
@@ -1467,7 +1449,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
container_of(port, struct uart_amba_port, port);
unsigned int cr;
- cr = pl011_readw(uap, REG_CR);
+ cr = readw(uap->port.membase + REG_CR);
#define TIOCMBIT(tiocmbit, uartbit) \
if (mctrl & tiocmbit) \
@@ -1487,7 +1469,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
}
#undef TIOCMBIT
- pl011_writew(uap, cr, REG_CR);
+ writew(cr, uap->port.membase + REG_CR);
}
static void pl011_break_ctl(struct uart_port *port, int break_state)
@@ -1498,12 +1480,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = pl011_readw(uap, uap->lcrh_tx);
+ lcr_h = readw(uap->port.membase + uap->lcrh_tx);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
- pl011_writew(uap, lcr_h, uap->lcrh_tx);
+ writew(lcr_h, uap->port.membase + uap->lcrh_tx);
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -1513,8 +1495,9 @@ static void pl011_quiesce_irqs(struct uart_port *port)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
+ unsigned char __iomem *regs = uap->port.membase;
- pl011_writew(uap, pl011_readw(uap, REG_MIS), REG_ICR);
+ writew(readw(regs + REG_MIS), regs + REG_ICR);
/*
* There is no way to clear TXIM as this is "ready to transmit IRQ", so
* we simply mask it. start_tx() will unmask it.
@@ -1528,7 +1511,7 @@ static void pl011_quiesce_irqs(struct uart_port *port)
* (including tx queue), so we're also fine with start_tx()'s caller
* side.
*/
- pl011_writew(uap, pl011_readw(uap, REG_IMSC) & ~UART011_TXIM, REG_IMSC);
+ writew(readw(regs + REG_IMSC) & ~UART011_TXIM, regs + REG_IMSC);
}
static int pl011_get_poll_char(struct uart_port *port)
@@ -1543,11 +1526,11 @@ static int pl011_get_poll_char(struct uart_port *port)
*/
pl011_quiesce_irqs(port);
- status = pl011_readw(uap, REG_FR);
+ status = readw(uap->port.membase + REG_FR);
if (status & UART01x_FR_RXFE)
return NO_POLL_CHAR;
- return pl011_readw(uap, REG_DR);
+ return readw(uap->port.membase + REG_DR);
}
static void pl011_put_poll_char(struct uart_port *port,
@@ -1556,10 +1539,10 @@ static void pl011_put_poll_char(struct uart_port *port,
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
- while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
+ while (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF)
barrier();
- pl011_writew(uap, ch, REG_DR);
+ writew(ch, uap->port.membase + REG_DR);
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -1583,15 +1566,15 @@ static int pl011_hwinit(struct uart_port *port)
uap->port.uartclk = clk_get_rate(uap->clk);
/* Clear pending error and receive interrupts */
- pl011_writew(uap, UART011_OEIS | UART011_BEIS | UART011_PEIS |
- UART011_FEIS | UART011_RTIS | UART011_RXIS, REG_ICR);
+ writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
+ UART011_RTIS | UART011_RXIS, uap->port.membase + REG_ICR);
/*
* Save interrupts enable mask, and enable RX interrupts in case if
* the interrupt is used for NMI entry.
*/
- uap->im = pl011_readw(uap, REG_IMSC);
- pl011_writew(uap, UART011_RTIM | UART011_RXIM, REG_IMSC);
+ uap->im = readw(uap->port.membase + REG_IMSC);
+ writew(UART011_RTIM | UART011_RXIM, uap->port.membase + REG_IMSC);
if (dev_get_platdata(uap->port.dev)) {
struct amba_pl011_data *plat;
@@ -1605,7 +1588,7 @@ static int pl011_hwinit(struct uart_port *port)
static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
{
- pl011_writew(uap, lcr_h, uap->lcrh_rx);
+ writew(lcr_h, uap->port.membase + uap->lcrh_rx);
if (uap->lcrh_rx != uap->lcrh_tx) {
int i;
/*
@@ -1613,14 +1596,14 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
* to get this delay write read only register 10 times
*/
for (i = 0; i < 10; ++i)
- pl011_writew(uap, 0xff, REG_MIS);
- pl011_writew(uap, lcr_h, uap->lcrh_tx);
+ writew(0xff, uap->port.membase + REG_MIS);
+ writew(lcr_h, uap->port.membase + uap->lcrh_tx);
}
}
static int pl011_allocate_irq(struct uart_amba_port *uap)
{
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
}
@@ -1635,11 +1618,12 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
spin_lock_irq(&uap->port.lock);
/* Clear out any spuriously appearing RX interrupts */
- pl011_writew(uap, UART011_RTIS | UART011_RXIS, REG_ICR);
+ writew(UART011_RTIS | UART011_RXIS,
+ uap->port.membase + REG_ICR);
uap->im = UART011_RTIM;
if (!pl011_dma_rx_running(uap))
uap->im |= UART011_RXIM;
- pl011_writew(uap, uap->im, REG_IMSC);
+ writew(uap->im, uap->port.membase + REG_IMSC);
spin_unlock_irq(&uap->port.lock);
}
@@ -1658,21 +1642,21 @@ static int pl011_startup(struct uart_port *port)
if (retval)
goto clk_dis;
- pl011_writew(uap, uap->vendor->ifls, REG_IFLS);
+ writew(uap->vendor->ifls, uap->port.membase + REG_IFLS);
spin_lock_irq(&uap->port.lock);
/* restore RTS and DTR */
cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
- pl011_writew(uap, cr, REG_CR);
+ writew(cr, uap->port.membase + REG_CR);
spin_unlock_irq(&uap->port.lock);
/*
* initialise the old status of the modem signals
*/
- uap->old_status = pl011_readw(uap, REG_FR) &
+ uap->old_status = readw(uap->port.membase + REG_FR) &
UART01x_FR_MODEM_ANY;
/* Startup DMA */
@@ -1712,11 +1696,11 @@ static int sbsa_uart_startup(struct uart_port *port)
static void pl011_shutdown_channel(struct uart_amba_port *uap,
unsigned int lcrh)
{
- unsigned long val;
+ unsigned long val;
- val = pl011_readw(uap, lcrh);
- val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
- pl011_writew(uap, val, lcrh);
+ val = readw(uap->port.membase + lcrh);
+ val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+ writew(val, uap->port.membase + lcrh);
}
/*
@@ -1730,11 +1714,11 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
uap->autorts = false;
spin_lock_irq(&uap->port.lock);
- cr = pl011_readw(uap, REG_CR);
+ cr = readw(uap->port.membase + REG_CR);
uap->old_cr = cr;
cr &= UART011_CR_RTS | UART011_CR_DTR;
cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
- pl011_writew(uap, cr, REG_CR);
+ writew(cr, uap->port.membase + REG_CR);
spin_unlock_irq(&uap->port.lock);
/*
@@ -1751,8 +1735,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap)
/* mask all interrupts and clear all pending ones */
uap->im = 0;
- pl011_writew(uap, uap->im, REG_IMSC);
- pl011_writew(0xffff, REG_ICR);
+ writew(uap->im, uap->port.membase + REG_IMSC);
+ writew(0xffff, uap->port.membase + REG_ICR);
spin_unlock_irq(&uap->port.lock);
}
@@ -1904,8 +1888,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
pl011_enable_ms(port);
/* first, disable everything */
- old_cr = pl011_readw(uap, REG_CR);
- pl011_writew(uap, 0, REG_CR);
+ old_cr = readw(port->membase + REG_CR);
+ writew(0, port->membase + REG_CR);
if (termios->c_cflag & CRTSCTS) {
if (old_cr & UART011_CR_RTS)
@@ -1938,8 +1922,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
quot -= 2;
}
/* Set baud rate */
- pl011_writew(uap, quot & 0x3f, REG_FBRD);
- pl011_writew(uap, quot >> 6, REG_IBRD);
+ writew(quot & 0x3f, port->membase + REG_FBRD);
+ writew(quot >> 6, port->membase + REG_IBRD);
/*
* ----------v----------v----------v----------v-----
@@ -1948,7 +1932,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
* ----------^----------^----------^----------^-----
*/
pl011_write_lcr_h(uap, lcr_h);
- pl011_writew(uap, old_cr, REG_CR);
+ writew(old_cr, port->membase + REG_CR);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -2089,9 +2073,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
- while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
+ while (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF)
barrier();
- pl011_writew(uap, ch, REG_DR);
+ writew(ch, uap->port.membase + REG_DR);
}
static void
@@ -2116,10 +2100,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
* First save the CR then disable the interrupts
*/
if (!uap->vendor->always_enabled) {
- old_cr = pl011_readw(uap, REG_CR);
+ old_cr = readw(uap->port.membase + REG_CR);
new_cr = old_cr & ~UART011_CR_CTSEN;
new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
- pl011_writew(uap, new_cr, REG_CR);
+ writew(new_cr, uap->port.membase + REG_CR);
}
uart_console_write(&uap->port, s, count, pl011_console_putchar);
@@ -2129,10 +2113,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
* and restore the TCR
*/
do {
- status = pl011_readw(uap, REG_FR);
+ status = readw(uap->port.membase + REG_FR);
} while (status & UART01x_FR_BUSY);
if (!uap->vendor->always_enabled)
- pl011_writew(uap, old_cr, REG_CR);
+ writew(old_cr, uap->port.membase + REG_CR);
if (locked)
spin_unlock(&uap->port.lock);
@@ -2145,10 +2129,10 @@ static void __init
pl011_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
- if (pl011_readw(uap, REG_CR) & UART01x_CR_UARTEN) {
+ if (readw(uap->port.membase + REG_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
- lcr_h = pl011_readw(uap, uap->lcrh_tx);
+ lcr_h = readw(uap->port.membase + uap->lcrh_tx);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
@@ -2163,13 +2147,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
else
*bits = 8;
- ibrd = pl011_readw(uap, REG_IBRD);
- fbrd = pl011_readw(uap, REG_FBRD);
+ ibrd = readw(uap->port.membase + REG_IBRD);
+ fbrd = readw(uap->port.membase + REG_FBRD);
*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
if (uap->vendor->oversampling) {
- if (pl011_readw(uap, REG_CR)
+ if (readw(uap->port.membase + REG_CR)
& ST_UART011_CR_OVSFACT)
*baud *= 2;
}
@@ -2241,13 +2225,10 @@ static struct console amba_console = {
static void pl011_putc(struct uart_port *port, int c)
{
- struct uart_amba_port *uap =
- container_of(port, struct uart_amba_port, port);
-
- while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
+ while (readl(port->membase + REG_FR) & UART01x_FR_TXFF)
;
- pl011_writeb(uap, c, REG_DR);
- while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY)
+ writeb(c, port->membase + REG_DR);
+ while (readl(port->membase + REG_FR) & UART01x_FR_BUSY)
;
}
@@ -2374,8 +2355,8 @@ static int pl011_register_port(struct uart_amba_port *uap)
int ret;
/* Ensure interrupts from this UART are masked and cleared */
- pl011_writew(uap, 0, REG_IMSC);
- pl011_writew(uap, 0xffff, REG_ICR);
+ writew(0, uap->port.membase + REG_IMSC);
+ writew(0xffff, uap->port.membase + REG_ICR);
if (!amba_reg.state) {
ret = uart_register_driver(&amba_reg);